The Management Pack for Dell EMC Isilon creates alerts (and in some cases provides recommended actions) based on various symptoms it detects in your Dell EMC Isilon Environment. See the table below for the list of alerts available in the Management Pack.
| Name | Description | Symptom |
|---|---|---|
| Cluster has Authentication failure for CloudPool | This alert indicates that Cluster has Authentication failure for CloudPool. | Authentication failure for CloudPool |
| Cluster has Authorization failure for CloudPool | This alert indicates that Cluster has Authorization failure for CloudPool. | Authorization failure for CloudPool |
| Cluster has Bucket not found for CloudPool | This alert indicates that Cluster has Bucket not found for CloudPool. | Bucket not found for CloudPool |
| Cluster has CloudPools failed to verify provider certificate | This alert indicates that Cluster has CloudPools failed to verify provider certificate. | CloudPools failed to verify provider certificate |
| Cluster has Detected data corruption/integrity failure for CloudPool | This alert indicates that Cluster has Detected data corruption/integrity failure for CloudPool. | Detected data corruption/integrity failure for CloudPool |
| Cluster has CloudPools no usable account found policyid | This alert indicates that Cluster has CloudPools no usable account found policyid. | CloudPools no usable account found policyid |
| Cluster has CloudPools Network connection failed provider | This alert indicates that Cluster has CloudPools Network connection failed provider. | CloudPools Network connection failed provider |
| Cluster has Object not found for CloudPool | This alert indicates that Cluster has Object not found for CloudPool. | Object not found for CloudPool |
| Cluster has System is running out of file descriptors | This alert indicates that Cluster has System is running out of file descriptors. | System is running out of file descriptors |
| Cluster has Error calculating NVRAM Journal backup partition size, setting to default 512MB | This alert indicates that Cluster has Error calculating NVRAM Journal backup partition size. | Error calculating NVRAM Journal backup partition size, setting to default 512MB |
| Cluster has Error from verification of Journal superblock of Valid Mirror | This alert indicates that Cluster has Error from verification of Journal superblock of Valid Mirror. | Error from verification of Journal superblock of Valid Mirror |
| Cluster has NVRAM Journal is larger than journal backup partition, resizing NVRAM Journal | This alert indicates that Cluster has NVRAM Journal is larger than journal backup partition. | NVRAM Journal is larger than journal backup partition, resizing NVRAM Journal |
| Cluster has Backend Ethernet link running below capacity | This alert indicates that Cluster has Backend Ethernet link running below capacity. | Backend Ethernet link running below capacity |
| Cluster has Failure state on switch controller | This alert indicates that Cluster has Failure state on switch controller. | Failure state on switch controller |
| Cluster has Fan failure detected in switch | This alert indicates that Cluster has Fan failure detected in switch. | Fan failure detected in switch |
| Cluster has Power supply failure detected in switch | This alert indicates power supply failure detected in switch. | Power supply failure detected in switch |
| Cluster has Failed to talk with backend switch SNMP server | This alert indicates failed to talk with backend switch SNMP server. | Failed to talk with backend switch SNMP server |
| Cluster has Internal network link down | This alert indicates that the internal network link down. | Internal network link down |
| Cluster has The expander is offline | This alert indicates that the expander is offline. | The expander is offline |
| Cluster has Node offline | This alert indicates node offline. | Node offline |
| Cluster has Node is online | This alert indicates that node is online. | Node is online |
| Cluster has Node pool is underprotected | This alert indicates that a Info alert was raised in DellEMCIsilon. | Node pool is underprotected |
| Cluster has Node has been offline for over maximum allowed days | This alert indicates that node has been offline for over maximum allowed days. | Node has been offline for over maximum allowed days |
| Cluster has A SmartQuotas configuration error occurred in config file | This alert indicates that a martQuotas configuration error occurred in config file. | A SmartQuotas configuration error occurred in config file |
| Cluster has A SmartQuotas internal error occurred | This alert indicates that a SmartQuotas internal error occurred. | A SmartQuotas internal error occurred |
| Cluster has SmartQuotas notification for quota for user failed | This alert indicates that SmartQuotas notification for quota for user failed. | SmartQuotas notification for quota for user failed |
| Cluster has SmartQuotas report generation failed | This alert indicates SmartQuotas report generation failed. | SmartQuotas report generation failed |
| Cluster has SmartQuotas threshold violation on quota, domain | This alert indicates SmartQuotas threshold violation on quota, domain | SmartQuotas threshold violation on quota, domain |
| Cluster has The snapshot daemon failed to create scheduled snapshot | This alert indicates that the snapshot daemon failed to create scheduled snapshot | The snapshot daemon failed to create scheduled snapshot |
| Cluster has The snapshot daemon failed to delete an expired snapshot | This alert indicates that the snapshot daemon failed to delete an expired snapshot. | The snapshot daemon failed to delete an expired snapshot |
| Cluster has The snapshot daemon failed to remove a snapshot lock | This alert indicates that the snapshot daemon failed to remove a snapshot lock. | The snapshot daemon failed to remove a snapshot lock |
| Cluster has The snapshot reserve space is nearly full | This alert indicates that the snapshot reserve space is nearly full. | The snapshot reserve space is nearly full |
| Cluster has Snapshot daemon schedule policy config error | This alert indicates snapshot daemon schedule policy config error. | Snapshot daemon schedule policy config error |
| Cluster has Audit CEE server is unreachable | This alert indicates Audit CEE server is unreachable. | Audit CEE server is unreachable |
| Cluster has AVScan Infected File Found | This alert indicates AVScan Infected File Found. | AVScan Infected File Found |
| Cluster has Unhealthy boot disks, mirror is degraded or missing components | This alert indicates unhealthy boot disks, mirror is degraded or missing components. | Unhealthy boot disks, mirror is degraded or missing components |
| Cluster has Heartbeat Event | This alert indicates Heartbeat Event. | Heartbeat Event |
| Cluster has Cluster Software Event | This alert indicates Cluster Software Event. | Cluster Software Event |
| Cluster has Cluster contains a mix encrypting nodes and non-encrypting nodes | This alert indicates cluster contains a mix encrypting nodes and non-encrypting nodes. | Cluster contains a mix encrypting nodes and non-encrypting nodes |
| Cluster has Monthly status | This alert indicates monthly status. | Monthly status |
| Cluster has ESRS is disconnected from the gateway | This alert indicates that ESRS is disconnected from the gateway. | ESRS is disconnected from the gateway |
| Cluster has ESRS is unconfigured | This alert indicates that ESRS is unconfigured. | ESRS is unconfigured |
| Cluster has A firmware update has not been completely applied | This alert indicates that a firmware update has not been completely applied. | A firmware update has not been completely applied |
| Cluster has Cluster needs to be restriped but FlexProtect is not running | This alert indicates cluster needs to be restriped but FlexProtect is not running. | Cluster needs to be restriped but FlexProtect is not running |
| Cluster has Job has failed | This alert indicates job has failed. | Job has failed |
| Cluster has Job phase begin | This alert indicates job phase begin. | Job phase begin |
| Cluster has Job phase end | This alert indicates job phase end. | Job phase end |
| Cluster has Job policy | This alert indicates job policy. | Job policy |
| Cluster has Job state | This alert indicates job state. | Job state |
| Cluster has Process was killed to free pages | This alert indicates that process was killed to free pages. | Process was killed to free pages |
| Cluster has Key Manager Init failed for cloudpools domain on node | This alert indicates Key Manager Init failed for cloudpools domain on node. | Key Manager Init failed for cloudpools domain on node |
| Cluster has Key Manager Init failed for SEDS domain on node | This alert indicates Key Manager Init failed for SEDS domain on node. | Key Manager Init failed for SEDS domain on node |
| Cluster has Licensing activation incomplete | This alert indicates Licensing activation incomplete. | Licensing activation incomplete |
| Cluster has License entitlements exceeded | This alert indicates License entitlements exceeded. | License entitlements exceeded |
| Cluster has Software license(s) expired | This alert indicates that Software license(s) expired | Software license(s) expired |
| Cluster has Software license(s) will expire | This alert indicates that Software license(s) will expire. | Software license(s) will expire |
| Cluster has LWIO CA throttling | This alert indicates LWIO CA throttling | LWIO CA throttling |
| Cluster has LWIO memory throttling | This alert indicates LWIO memory throttling. | LWIO memory throttling |
| Cluster has Process failed | This alert indicates process failed. | Process failed |
| Cluster has Process killed | This alert indicates process killed. | Process killed |
| Cluster has Mount request failed with error | This alert indicates mount request failed with error. | Mount request failed with error |
| Cluster has Mounted host lookup failed | This alert indicates mounted host lookup failed. | Mountd host lookup failed |
| Cluster has NFS client may have inaccurate view of directory due to limitations of legacy 32-bit conversion. No way to safely translate readdirplus cookie to 32bits | This alert indicates NFS client may have inaccurate view of directory due to limitations of legacy 32-bit conversion. No way to safely translate readdirplus cookie to 32bits. | NFS client may have inaccurate view of directory due to limitations of legacy 32-bit conversion. No way to safely translate readdirplus cookie to 32bits. |
| Cluster has NFS identity query failed | This alert indicates NFS identity query failed | NFS identity query failed |
| Cluster has SyncIQ resolved WORM committed file conflicts for policy | This alert indicates SyncIQ resolved WORM committed file conflicts for policy. | SyncIQ resolved WORM committed file conflicts for policy |
| Cluster has SyncIQ RPO exceeded for policy | This alert indicates SyncIQ RPO exceeded for policy. | SyncIQ RPO exceeded for policy |
| Cluster has SyncIQ software configuration error | This alert indicates SyncIQ software configuration error. | SyncIQ software configuration error |
| Cluster has Test event | This alert indicates test event. | Test event |
| Cluster has Test event 2 | This alert indicates test event 2. | Test event 2 |
| Cluster has Upgrade Notice | This alert indicates Upgrade Notice. | Upgrade Notice |
| Cluster has Upgrade Finished | This alert indicates Upgrade Finished. | Upgrade Finished |
| Cluster has Upgrade Node Event | This alert indicates Upgrade Node Event. | Upgrade Node Event |
| Cluster has Upgrade Rollback Start | This alert indicates Upgrade Rollback Start. | Upgrade Rollback Start |
| Cluster has Upgrade Start | This alert indicates Upgrade Start. | Upgrade Start |
| Cluster has AD server missing needed SPN(s); try 'isi auth ads spn check' | This alert indicates AD server missing needed SPN(s); try 'isi auth ads spn check'. | AD server missing needed SPN(s); try 'isi auth ads spn check' |
| Cluster has LDAP servers are offline. Authentication services may be interrupted | This alert indicates LDAP servers are offline. Authentication services may be interrupted. | LDAP servers are offline. Authentication services may be interrupted. |
| Cluster has NIS servers are offline. Authentication services may be interrupted | This alert indicates NIS servers are offline. Authentication services may be interrupted. | NIS servers are offline. Authentication services may be interrupted. |
| Cluster has Auth Upgrade Failure | This alert indicates Auth Upgrade Failure. | Auth Upgrade Failure |
| Cluster has Failed to parse idmap rules | This alert indicates failed to parse idmap rules. | Failed to parse idmap rules |
| Cluster has Lwio Parameter Invalid | This alert indicates Lwio Parameter Invalid. | Lwio Parameter Invalid |
| Cluster has ICAP server misconfigured, unreachable or unresponsive | This alert indicates ICAP server misconfigured, unreachable or unresponsive. | ICAP server misconfigured, unreachable or unresponsive |
| Cluster has Storage transport problem | This alert indicates storage transport problem. | Storage transport problem |
| Cluster has SyncIQ problem for policy | This alert indicates SyncIQ problem for policy. | SyncIQ problem for policy |
| Cluster has Windows Authorization Event | This alert indicates Windows Authorization Event. | Windows Authorization Event |
| Cluster has Windows Identity Mapping Event | This alert indicates Windows Identity Mapping Event. | Windows Identity Mapping Event |
| Cluster has Windows Networking Event | This alert indicates Windows Networking Event. | Windows Networking Event |
| Node has Amp sensor out of spec in chassis | This alert indicates amp sensor out of spec in chassis. | Amp sensor out of spec in chassis |
| Node has Discrete sensor out of spec in chassis | This alert indicates discrete sensor out of spec in chassis. | Discrete sensor out of spec in chassis |
| Node has Fan sensor out of spec in chassis | This alert indicates fan sensor out of spec in chassis. | Fan sensor out of spec in chassis |
| Node has Meters sensor out of spec in chassis | This alert indicates meters sensor out of spec in chassis. | Meters sensor out of spec in chassis |
| Node has Temperature sensor out of spec in chassis | This alert indicates temperature sensor out of spec in chassis. | Temperature sensor out of spec in chassis |
| Node has Voltage sensor out of spec in chassis | This alert indicates voltage sensor out of spec in chassis. | Voltage sensor out of spec in chassis |
| Node has Watt sensor out of spec in chassis | This alert indicates watt sensor out of spec in chassis. | Watt sensor out of spec in chassis |
| Node has Redundant power supply failure in chassis | This alert indicates redundant power supply failure in chassis. | Redundant power supply failure in chassis |
| Node has Discrete sensor out of spec in chassis. | This alert indicates discrete sensor out of spec in chassis. | Discrete sensor out of spec in chassis |
| Node has Sensor out of spec in chassis | This alert indicates sensor out of spec in chassis. | Sensor out of spec in chassis |
| Node has Power Supply 1 Over Current out of spec in chassis | This alert indicates power supply 1 over current out of spec in chassis. | Power Supply 1 Over Current out of spec in chassis |
| Node has Power Supply 1 Fan Fail in chassis | This alert indicates power supply 1 fan fail in chassis. | Power Supply 1 Fan Fail in chassis |
| Node has Power Supply 1 Over Voltage in chassis | This alert indicates power supply 1 over voltage in chassis. | Power Supply 1 Over Voltage in chassis |
| Node has Redundant power supply 1 failure in chassis | This alert indicates redundant power supply 1 failure in chassis. | Redundant power supply 1 failure in chassis |
| Node has Power Supply 1 Under Voltage in chassis | This alert indicates power supply 1 under voltage in chassis. | Power Supply 1 Under Voltage in chassis |
| Node has Power Supply 2 Over Current out of spec in chassis | This alert indicates power supply 2 over current out of spec in chassis. | Power Supply 2 Over Current out of spec in chassis |
| Node has Power Supply 2 Fan Fail in chassis | This alert indicates power supply 2 fan fail in chassis. | Power Supply 2 Fan Fail in chassis |
| Node has Power Supply 2 Over Voltage in chassis | This alert indicates power supply 2 over voltage in chassis. | Power Supply 2 Over Voltage in chassis |
| Node has Redundant power supply 2 failure in chassis | This alert indicates redundant power supply 2 failure in chassis. | Redundant power supply 2 failure in chassis |
| Node has Power Supply 2 Under Voltage in chassis | This alert indicates power supply 2 under voltage in chassis. | Power Supply 2 Under Voltage in chassis |
| Node has Redundant power supply 1 failure in chassis | This alert indicates redundant power supply 1 failure in chassis. | Redundant power supply 1 failure in chassis |
| Node has Redundant power supply 2 failure in chassis | This alert indicates redundant power supply 2 failure in chassis. | Redundant power supply 2 failure in chassis |
| Node has Fan sensor out of spec in chassis | This alert indicates fan sensor out of spec in chassis. | Fan sensor out of spec in chassis |
| Node has Drive sensor out of spec in chassis | This alert indicates drive sensor out of spec in chassis. | Drive sensor out of spec in chassis |
| Node has Drive sensor out of spec in chassis | This alert indicates drive sensor out of spec in chassis. | Drive sensor out of spec in chassis |
| Node has Sensor out of spec in chassis | This alert indicates sensor out of spec in chassis. | Sensor out of spec in chassis |
| Node has Fan sensor out of spec in chassis | This alert indicates fan sensor out of spec in chassis. | Fan sensor out of spec in chassis |
| Node has Battery sensor out of spec in chassis | This alert indicates battery sensor out of spec in chassis. | Battery sensor out of spec in chassis |
| Node has Temperature sensor out of spec in chassis | This alert indicates temperature sensor out of spec in chassis. | Temperature sensor out of spec in chassis |
| Node has Sensor is not providing a reading | This alert indicates sensor is not providing a reading. | Sensor is not providing a reading |
| Node has Temperature sensor out of spec in chassis | This alert indicates temperature sensor out of spec in chassis. | Temperature sensor out of spec in chassis |
| Node has Temperature sensor out of spec in chassis | This alert indicates temperature sensor out of spec in chassis. | Temperature sensor out of spec in chassis |
| Node has Physical Memory low | This alert indicates Physical Memory low. | Physical Memory low |
| Node has Redundant power supply failure in chassis | This alert indicates redundant power supply failure in chassis. | Redundant power supply failure in chassis |
| Node has Redundant power supply failure on expansion chassis | This alert indicates redundant power supply failure on expansion chassis. | Redundant power supply failure on expansion chassis |
| Node has Adaptive cooling event detected | This alert indicates adaptive cooling event detected. | Adaptive cooling event detected |
| Node has Journal protection in the event of a power failure not enabled | This alert indicates Journal protection in the event of a power failure not enabled. | Journal protection in the event of a power failure not enabled |
| Node has Battery Backup Unit fault detected | This alert indicates Battery Backup Unit fault detected. | Battery Backup Unit fault detected |
| Node has Compute node fault detected | This alert indicates compute node fault detected. | Compute node fault detected |
| Node has Corrected Hardware Error | This alert indicates corrected hardware error. | Corrected Hardware Error |
| Node has DIMM fault detected | This alert indicates DIMM fault detected. | DIMM fault detected |
| Node has Drive interface board fault detected | This alert indicates drive interface board fault detected. | Drive interface board fault detected |
| Node has External fault detected | This alert indicates external fault detected. | External fault detected |
| Node has Fan fault detected | This alert indicates fan fault detected. | Fan fault detected |
| Node has I2C fault detected | This alert indicates I2C fault detected. | I2C fault detected |
| Node has Internal fault detected | This alert indicates internal fault detected. | Internal fault detected |
| Node has IO module fault detected | This alert indicates IO module fault detected. | IO module fault detected |
| Node has Local journal not in protected state | This alert indicates local journal not in protected state. | Local journal not in protected state |
| Node has Local Baseboard Management Controller unresponsive | This alert indicates Local Baseboard Management Controller unresponsive. | Local Baseboard Management Controller unresponsive |
| Node has Internal M.2 drive fault detected | This alert indicates internal M.2 drive fault detected. | Internal M.2 drive fault detected fault detected |
| Node has Midplane fault detected | This alert indicates midplane fault detected | Midplane fault detected |
| Node has MNVI protocol establishment error | This alert indicates MNVI protocol establishment error. | "MNVI protocol establishment error |
| Node has NTB Link outage | This alert indicates NTB link outage. | NTB Link outage |
| Node has Non-transparent bridge fault detected | This alert indicates non-transparent bridge fault detected. | Non-transparent bridge fault detected |
| Node has Peer Baseboard Management Controller unresponsive | This alert indicates Peer Baseboard Management Controller unresponsive | Peer Baseboard Management Controller unresponsive |
| Node has Unable to restore journal after powering up the node | This alert indicates unable to restore journal after powering up the node. | "Unable to restore journal after powering up the node |
| Node has Power supply redundancy fault | This alert indicates a power supply redundancy fault. | Power supply redundancy fault |
| Node has Power supply fault detected | This alert indicates power supply fault detected. | Power supply fault detected |
| Node has Sensor out of spec in chassis | This alert indicates sensor out of spec in chassis. | Sensor out of spec in chassis |
| Node has Sensor out of spec in chassis | This alert indicates sensor out of spec in chassis. | Sensor out of spec in chassis |
| Node has Power Supply 1 AC Fail in chassis | This alert indicates power supply 1 AC fail in chassis. | Power Supply 1 AC Fail in chassis |
| Node has Power Supply 1 Over Current out of spec in chassis | This alert indicates power supply 1 over current out of spec in chassis. | "Power Supply 1 Over Current out of spec in chassis |
| Node has Power Supply 1 Fan Fail in chassis | This alert indicates power supply 1 fan fail in chassis. | Power Supply 1 Fan Fail in chassis |
| Node has Power Supply 1 Over Voltage in chassis | This alert indicates power supply 1 over voltage in chassis. | Power Supply 1 Over Voltage in chassis |
| Node has Power Supply 1 Under Voltage in chassis | This alert indicates power supply 1 under voltage in chassis. | Power Supply 1 Under Voltage in chassis |
| Node has Power Supply 2 AC Fail in chassis | This alert indicates power supply 2 AC fail in chassis. | Power Supply 2 AC Fail in chassis |
| Node has Power Supply 2 Over Current out of spec in chassis | This alert indicates power supply 2 over current out of spec in chassis. | Power Supply 2 Over Current out of spec in chassis |
| Node has Power Supply 2 Fan Fail in chassis | This alert indicates power supply 2 fan fail in chassis. | Power Supply 2 Fan Fail in chassis |
| Node has Power Supply 2 Over Voltage in chassis | This alert indicates power supply 2 over voltage in chassis. | Power Supply 2 Over Voltage in chassis |
| Node has Power Supply 2 Under Voltage in chassis | This alert indicates power supply 2 under voltage in chassis. | Power Supply 2 Under Voltage in chassis |
| Node has Redundant power supply failure in chassis | This alert indicates redundant power supply failure in chassis. | Redundant power supply failure in chassis |
| Node has NVRAM arm vault fail in chassis | This alert indicates NVRAM arm vault fail in chassis. | NVRAM arm vault fail in chassis |
| Node has NVRAM controller fail in chassis | This alert indicates NVRAM controller fail in chassis. | NVRAM controller fail in chassis |
| Node has NVRAM DMA state machine entered error state in chassis | This alert indicates NVRAM DMA state machine entered error state in chassis. | NVRAM DMA state machine entered error state in chassis |
| Node has NVRAM DMA ring initialization failure in chassis | This alert indicates NVRAM DMA state machine entered readonly state in chassis. | NVRAM DMA ring initialization failure in chassis |
| Node has NVRAM DMA state machine entered readonly state in chassis | This alert indicates NVRAM DMA state machine entered readonly state in chassis. | NVRAM DMA state machine entered readonly state |
| Node has NVRAM DMA timeout failure in chassis | This alert indicates NVRAM DMA timeout failure in chassis. | NVRAM DMA timeout failure in chassis |
| Node has NVRAM Correctable (single-bit) ECC in chassis | This alert indicates NVRAM correctable (single-bit) ECC in chassis. | NVRAM Correctable (single-bit) ECC in chassis |
| Node has NVRAM Uncorrectable (multi-bit) ECC Error in chassis | This alert indicates NVRAM uncorrectable (multi-bit) ECC Error in chassis. | NVRAM Uncorrectable (multi-bit) ECC Error in chassis |
| Node has NVRAM IDENTIFY ping fail in chassis | This alert indicates NVRAM IDENTIFY ping fail in chassis. | NVRAM IDENTIFY ping fail in chassis |
| Node has NVRAM invalidate nvram fail in chassis | This alert indicates NVRAM invalidate nvram fail in chassis. | NVRAM invalidate nvram fail in chassis |
| Node has NVRAM async event invalid log page in chassis | This alert indicates NVRAM async event invalid log page in chassis. | NVRAM async event invalid log page in chassis |
| Node has NVRAM interrupt (MSI) initialization failure in chassis | This alert indicates NVRAM interrupt (MSI) initialization failure in chassis. | NVRAM interrupt (MSI) initialization failure in chassis |
| Node has NVRAM msi-x resources failure in chassis | This alert indicates NVRAM msi-x resources failure in chassis. | NVRAM msi-x resources failure in chassis |
| Node has NVRAM SoC firmware detected DMA execution failure in chassis | This alert indicates NVRAM SoC firmware detected DMA execution failure in chassis. | NVRAM SoC firmware detected DMA execution failure in chassis |
| Node has NVRAM SoC firmware detected DMA fetch failure in chassis | This alert indicates NVRAM SoC firmware detected DMA fetch failure in chassis. | NVRAM SoC firmware detected DMA fetch failure in chassis |
| Node has NVRAM SoC firmware detected DMA stall failure in chassis | This alert indicates NVRAM SoC firmware detected DMA stall failure in chassis. | NVRAM SoC firmware detected DMA stall failure in chassis |
| Node has NVRAM SoC firmware panic failure in chassis | This alert indicates NVRAM SoC firmware panic failure in chassis. | NVRAM SoC firmware panic failure in chassis |
| Node has NVRAM SoC firmware version failure in chassis | This alert indicates NVRAM SoC firmware version failure in chassis. | NVRAM SoC firmware version failure in chassis |
| Node has NVRAM SoC PCIe link width negotiation failure in chassis | This alert indicates NVRAM SoC PCIe link width negotiation failure in chassis. | NVRAM SoC PCIe link width negotiation failure in chassis |
| Node has NVRAM SoC PCIe link speed negotiation failure in chassis | This alert indicates NVRAM SoC PCIe link speed negotiation failure in chassis. | NVRAM SoC PCIe link speed negotiation failure in chassis |
| Node has NVRAM SoC missing firmware failure in chassis | This alert indicates NVRAM SoC missing firmware failure in chassis. | NVRAM SoC missing firmware failure in chassis |
| Node has NVRAM SoC Power-On-Selftest (POST) failure in chassis | This alert indicates NVRAM SoC Power-On-Selftest (POST) failure in chassis. | NVRAM SoC Power-On-Selftest (POST) failure in chassis |
| Node has NVRAM SoC reset failure in chassis | This alert indicates NVRAM SoC reset failure in chassis. | "NVRAM SoC reset failure in chassis |
| Node has NVRAM SRAM correctable (single-bit) ECC error in chassis | This alert indicates NVRAM SRAM correctable (single-bit) ECC error in chassis. | NVRAM SRAM correctable (single-bit) ECC error in chassis |
| Node has Redundant power supply failure in chassis | This alert indicates redundant power supply failure on chassis. | Redundant power supply failure in chassis |
| Node has Redundant power supply failure in chassis | This alert indicates redundant power supply failure on chassis. | Redundant power supply failure in chassis |
| Node has Redundant power supply failure on expansion chassis | This alert indicates redundant power supply failure on expansion chassis. | Redundant power supply failure on expansion chassis |
| Node has NVRAM battery has failed in chassis | This alert indicates that a NVRAM battery has failed in chassis. | NVRAM battery has failed in chassis |
| Node has Node's Chassis Management Controller (CMC) is unresponsive in chassis. Hardware is no longer being monitored | This alert indicates that a node's Chassis Management Controller (CMC) is unresponsive in chassis. Hardware is no longer being monitored. | Node's Chassis Management Controller (CMC) is unresponsive in chassis. Hardware is no longer being monitored. |
| Node has DMI log entry in chassis slot | This alert indicates that a node has DMI log entry in chassis slot. | DMI log entry in chassis slot |
| Node has DMI read failure in chassis | This alert indicates that a node has DMI read failure in chassis. | DMI read failure in chassis |
| Node has Policy Error -- Correctable ECC error policy violation | This alert indicates that a node has a policy error -- correctable ECC error policy violation. | Policy Error -- Correctable ECC error policy violation |
| Node has Node contains an 812 (3/4 chassis) SKU in chassis | This alert indicates that a node contains an 812 (3/4 chassis) SKU in chassis. | Node contains an 812 (3/4 chassis) SKU in chassis |
| Node has Firmware update failed for device | This alert indicates that a firmware update failed for device. | Firmware update failed for device |
| Node has Hardware error - I2C bus hang has occurred in chassis | This alert indicates that an I2C bus hang has occurred in chassis. | Hardware error - I2C bus hang has occurred in chassis |
| Node has NVRAM error has occurred in chassis | This alert indicates that a NVRAM error has occurred in chassis. | NVRAM error has occurred in chassis |
| Node has Chassis has been opened in chassis | This alert indicates that a chassis has been opened in chassis. | Chassis has been opened in chassis |
| Node has A drive power zone fuse on the expander board has failed | This alert indicates that a drive power zone fuse on the expander board has failed. | A drive power zone fuse on the expander board has failed |
| Node has Node has wrong drive (SSD/HDD) ratio in chassis | This alert indicates that a node has wrong drive ratio (SSD/HDD) in chassis. | Node has wrong drive (SSD/HDD) ratio in chassis |
| Node has Redundant power supply 1 failure in chassis | This alert indicates redundant power supply 1 failure in chassis. | Redundant power supply 1 failure in chassis |
| Node has Redundant power supply 2 failure in chassis | This alert indicates redundant power supply 2 failure in chassis. | Redundant power supply 2 failure in chassis |
| Node has Device is not a supported boot disk | This alert indicates that a device is not a supported boot disk. | Device is not a supported boot disk |
| Node has Excessive boot flash drive writing detected | This alert indicates that excessive boot flash drive writing has been detected. | Excessive boot flash drive writing detected |
| Node has Device disconnected. Boot mirror is critical | This alert indicates that a Info alert was raised in DellEMCIsilon. | Device disconnected. Boot mirror is critical. |
| Node has A required mirror is missing on the boot drives | This alert indicates that a node has a required mirror missing on the boot drives. | A required mirror is missing on the boot drives |
| Node has Only one boot disk is remaining in the mirror | This alert indicates that only one boot disk is remaining in the mirror. | Only one boot disk is remaining in the mirror |
| Node has Drive was inserted in a bay that is disabled | This alert indicates that a drive was inserted in a bay that is disabled. | Drive was inserted in a bay that is disabled |
| Node has Disk sector error | This alert indicates that a node has disk sector error. | Disk sector error |
| Node has Disk ECC list is full | This alert indicates that a disk ECC list is full. | Disk ECC list is full |
| Node has Failed to crypto-erase drive | This alert indicates that a node has failed to crypto-erase the drive. | Failed to crypto-erase drive |
| Node has The drive was not formatted correctly and was not added to the filesystem | This alert indicates that a drive was not formatted correctly and was not added to the filesystem. | The drive was not formatted correctly and was not added to the filesystem |
| Node has The write-cache for the drive is enabled | This alert indicates that the write-cache for the drive is enabled. | The write-cache for the drive is enabled |
| Node has Drive is insecure | This alert indicates that a drive is insecure. | "Drive is insecure |
| Node has Drive has an invalid write-cache setting and has been smartfailed | This alert indicates that a drive has an invalid write-cache setting and has been smartfailed. | Drive has an invalid write-cache setting and has been smartfailed |
| Node has Disk Repair Started | This alert indicates that a node has disk repair started. | Disk Repair Started |
| Node has Disk Repair Complete. Insert new drive into bay | This alert indicates that a disk repair has been completed and a new drive should be inserted into the bay. | Disk Repair Complete. Insert new drive into bay. |
| Node has There is at least one smartpool at or over capacity | This alert indicates that at least one smartpool is at or over capacity. | There is at least one smartpool at or over capacity |
| Node has The SmartPools upgrade has not completed | This alert indicates that a node's SmartPools upgrade has not completed. | The SmartPools upgrade has not completed |
| Node has A drive that previously failed was inserted as a replacement | This alert indicates that a drive that previously failed was inserted as a replacement. | A drive that previously failed was inserted as a replacement |
| Node has Disk Repair Complete. Replace the drive | This alert indicates that a node has completed disk repair and the drive needs to be replaced. | Disk Repair Complete. Replace the drive. |
| Node has /(root) partition is near capacity | This alert indicates that a node's /(root) partition is near capacity. | /(root) partition is near capacity |
| Node has Disk Repair Completed: The drive is ready to be replaced | This alert indicates that a node has completed disk repair and is ready to be replaced. | Disk Repair Completed: The drive is ready to be replaced |
| Node has Disk Repair Completed: The sled contains a smartfailed drive | This alert indicates that a node has completed disk repair. The sled contained a smartfailed drive. | Disk Repair Completed: The sled contains a smartfailed drive |
| Node has A FlexProtect job is in progress | This alert indicates that a node has a FlexProtect job in progress. | A FlexProtect job is in progress |
| Node has The SSD drives are near capacity | This alert indicates that a node has SSD drives near capacity. | The SSD drives are near capacity |
| Node has Drive Stall | This alert indicates that a node has a drive that stalled. | Drive Stall |
| Node has One or more drives are not healthy | This alert indicates that a node has one or more drives that are not healthy. | One or more drives are not healthy |
| Node has Drive has unknown firmware | This alert indicates that a drive in the node has unknown firmware. | Drive has unknown firmware |
| Node has Drive is unknown model | This alert indicates that a drive in the node is an unknown model. | Drive is unknown model |
| Node has Unprovisionable drive(s) | This alert indicates that a node has one or more unprovisionable drives. | Unprovisionable drive(s) |
| Node has A used drive from another cluster was inserted as a replacement | This alert indicates that a used drive from another cluster was inserted as a replacement for a node. | A used drive from another cluster was inserted as a replacement |
| Node has /var/crash partition is near capacity | This alert indicates that a node's /var/crash partition is near capacity. | /var/crash partition is near capacity |
| Node has /var partition near capacity | This alert indicates that a node's /var partition is near capacity. | /var partition near capacity |
| Node has The drive was inserted into a bay that contains another drive that is in the process of smartfailing | This alert indicates that a node has a drive inserted into a bay that contains another drive that is in the process of smartfailing. | The drive was inserted into a bay that contains another drive that is in the process of smartfailing |
| Node has Drive is the wrong type | This alert indicates that a node has a drive of the wrong type. | Drive is the wrong type |
| Node has Drive has the wrong write-cache settings for this platform was inserted as a replacement | This alert indicates that a node has a drive with the wrong write-cache settings for this platform that was inserted as a replacement. | Drive has the wrong write-cache settings for this platform was inserted as a replacement |
| Node has Drive model, firmware has unsupported block length | This alert indicates that a node has a drive model with firmware that has an unsupported block length. | Drive model, firmware has unsupported block length |
| Node has Drive has wrong firmware | This alert indicates that a node has a drive with the wrong firmware. | Drive has wrong firmware |
| Node has A used drive from another node in this cluster was inserted as a replacement | This alert indicates that a node has a used drive from another node in this cluster that was inserted as a replacement. | A used drive from another node in this cluster was inserted as a replacement |
| Node has Drive bay threshold exceeded | This alert indicates that a node has exceeded the drive bay threshold. | Drive bay threshold exceeded |
| Node has Missing config file for drive model | This alert indicates that a node has a missing config file for drive model. | Missing config file for drive model |
| Node has Drive SMART status has exceeded threshold | This alert indicates that a node has drive SMART status that has exceeded threshold. | Drive SMART status has exceeded threshold |
| Node has A fault was detected in a sled | This alert indicates that a a fault was detected in a sled. | A fault was detected in a sled |
| Node has The drive is missing. Starting disk repair for the missing drive | This alert indicates that a drive is missing from a node. Disk repair for the missing drive will be started automatically. | The drive is missing. Starting disk repair for the missing drive. |
| Node has Sled has been removed from the chassis for longer than the timeout limit | This alert indicates that a node has a sled that has been removed from the chassis for longer than the timeout. | Sled has been removed from the chassis for longer than the timeout limit. |
| Node has The sled service timeout limit has expired | This alert indicates that a node's sled service timeout limit has expired. | The sled service timeout limit has expired. |
| Node has A sled was unexpectedly removed from the chassis | This alert indicates that a node has a sled that was unexpectedly removed from the chassis. | A sled was unexpectedly removed from the chassis. |
| Node has Node pool(s) with an unbalanced SSD count | This alert indicates that a node has pool(s) with an unbalanced SSD count. | Node pool(s) with an unbalanced SSD count |
| Node has External network problem | This alert indicates that a node has an external network problem. | External network problem |
| Node has IFS filesystem damage detected | This alert indicates that IFS filesystem damage has been detected on a node. | IFS filesystem damage detected |
| Node has Hardware monitoring failure | This alert indicates that a node has a hardware monitoring failure. | Hardware monitoring failure |
| Node has Node overheating | This alert indicates that a node is overheating. | Node overheating |
| Node has Physical memory low | This alert indicates that a node has low physical memory available. | Physical memory low |
| Node has Power supply problem | This alert indicates that a node has a power supply problem. | Power supply problem |
| Node has Node rebooted | This alert indicates that a node rebooted. | Node rebooted |
| Node has Node failing to reboot | This alert indicates that a node is failing to reboot. | Node failing to reboot |
| Node has Node below operating temperature | This alert indicates that a node is below operating temperature. | Node below operating temperature |
