This topic tells you how to build an on-demand service tile using the Tile Generator. For an example tile, see the example-kafka-on-demand-tile in GitHub.

For a list of available manifest properties for the broker, see the broker job spec in GitHub.

Requirements

To build an on-demand tile you need the following releases:

  • On Demand Service Broker (ODB)—Download ODB from BOSH.io Releases.
  • Your service adapter—Get this from the service author.
  • Your service release—Get this from the release author.

About Networks

When using the ODB in a tile with Tanzu Operations Manager v2.0 and earlier, you need at least two private networks:

  • A network where Tanzu Operations Manager deploys the on-demand broker VM
  • A different network where the on-demand broker deploys service instance VMs

The network for service instances should be flagged as a Service Network in Tanzu Operations Manager.

NoteFor Tanzu Operations Manager v2.1 and later, you do not need separate networks for the on-demand broker and service instances. However, VMware recommends that you have at least two networks as described above.

Build a Tile for an On-Demand Service

There are several methods you can use to build a tile. This topic describes how to build a tile using the Tile Generator.

To use the Tile Generator to build a tile for an on-demand service:

  1. Generate a tile.yml file by doing steps 1 through 4 of Using the Tile Generator.

  2. Add accessors, on-demand broker lifecycle errands, and optional features to the tile.yml file generated in step 1. This provides configuration for the ODB and additional configuration options for operators to select in Tanzu Operations Manager.

    For more information about what to add to the tile.yml, see the following sections below:

  3. Requirements
  4. About Networks

  5. Build a Tile for an On-Demand Service

  6. Build your tile by running the following command:

    tile build

Add Accessors

The ODB requires tiles to be configured with certain information. You must add accessors to the tile.yml file to provide values that operators cannot configure in Tanzu Operations Manager.

Add the following accessors to your tile.yml file:

Note The accessors in this section are mandatory. For other accessors, see Tanzu Operations Manager Provided Snippets.

director

Tanzu Operations Manager uses these accessors to get values relating to the BOSH Director installation. For the on-demand broker to interact with BOSH Director, on-demand service tiles must be configured with credentials for managing BOSH deployments.

The following table lists the accessors you must add:

Accessor Description
$director.hostname The director’s hostname or IP address
$director.ca_public_key The director’s root ca certificate. Related: Configure SSL Certificates.


For example:

bosh:
  url: https://(( $director.hostname )):25555
  root_ca_cert: (( $director.ca_public_key ))

To see this example in context, see the example-kafka-on-demand-tile in GitHub.

self

Tanzu Operations Manager uses these accessors to get values that have been assigned to the tile after installation. To enable $self accessors, set service_broker: true at the top level of your tile.yml file.

Note Setting service_broker: true causes the BOSH Director to redeploy when installing or uninstalling the tile.

The following table lists the accessors you must add:

Accessor Description
$self.uaa_client_name UAA client name that can authenticate with the BOSH Director
$self.uaa_client_secret UAA client secret that can authenticate with the BOSH Director
$self.stemcell_version The stemcell that the service deployment uses
$self.service_network Service network configured for the on-demand instances

The service network has to be created manually. Create a subnet on AWS and then add it to the director. In the BOSH Director tile, under Create Networks > ADD network > fill in the subnet/vpc details.

For example:

bosh:
  authentication:
    uaa:
      url: https://(( $director.hostname )):8443
      client_id: (( $self.uaa_client_name ))
      client_secret: (( $self.uaa_client_secret ))

To see this example in context, see the example-kafka-on-demand-tile in GitHub.

(Optional) cf

Tanzu Operations Manager uses these accessors to get values from the VMware Tanzu Application Service for VMs (TAS for VMs) tile. If you want to use TAS for VMs, add these accessors to your tile.yml file.

The following table lists the accessors you must add to use TAS for VMs:

Accessor Description
..cf.ha_proxy.skip_cert_verify.value Flag to skip SSL certificate verification for connections to the CF API
..cf.cloud_controller.apps_domain.value The application domain configured in the CF installation
..cf.cloud_controller.system_domain.value The system domain configured in the CF installation
..cf.uaa.system_services_credentials.identity Username of a CF user in the cloud_controller.admin group, to be used by services
..cf.uaa.system_services_credentials.password Password of a CF user in the cloud_controller.admin group, to be used by services


For example:

disable_ssl_cert_verification: (( ..cf.ha_proxy.skip_cert_verify.value ))
cf:
  url: https://api.(( ..cf.cloud_controller.system_domain.value ))
  authentication:
    url: https://uaa.(( ..cf.cloud_controller.system_domain.value ))
    user_credentials:
      username: (( ..cf.uaa.system_services_credentials.identity ))
      password: (( ..cf.uaa.system_services_credentials.password ))

To see this example in context, see the example-kafka-on-demand-tile in GitHub.

Add On-Demand Broker Lifecycle Errands

The example-kafka-on-demand-tile example in GitHub shows how the errands in the on-demand broker release can be used.

VMware recommends that you add the errands below to your tile. The errands should be specified in the following order:

Post-deploy:

  • register-broker
  • upgrade-all-service-instances

Pre-delete:

  • delete-all-service-instances-and-deregister-broker

Note The upgrade-all-service-instances errand can be configured with the number of simultaneous upgrades and the number of canary instances. For more information about these parameters, see Upgrade All Service Instances.

For more information about these errands and how to add them, see Broker and Service Management.

The example example-kafka-on-demand-tile in GitHub shows how to create a tab with fields to configure the parameters for this errand. The example tile has constraints to ensure the number of simultaneous upgrades is greater than one and the number of canaries is greater than zero.

(Optional) Allow Public IP Addresses for On-Demand Service Instance Groups

Tanzu Operations Manager provides a VM extension called public_ip in the BOSH Director’s cloud config. Use this feature to give Tanzu Operations Manager operators the option to assign a public IP address to instance groups. This IP is only used for outgoing traffic to the internet from VMs with the public_ip extension. All internal traffic / incoming connections need to go over the private IP.

To allow operators to a assign public IP addresses to on-demand service instance groups, update your tile.yml file as follows:

  1. Add the following to the form_types section:

    For example:

    form_types:
- name: example_form
  property_inputs:
  - reference: .broker.example_vm_extensions
    label: VM options
    description: List of VM options for Service Instances

  2. Add the following to the job_types section:

    For example:

    job_types:
- name: broker
  templates:
  - name: broker
    release: on-demand-service-broker
    manifest: |
      service_catalog:
        plans:
        - name: example-plan
          instance_groups:
          - name: example-instance-group
            vm_extensions: (( .broker.example_vm_extensions.value )) # add this line

  3. Add the following to the property_blueprints section under the broker job:

    For example:

      property_blueprints:           # add this section
  - name: example_vm_extensions
    type: multi_select_options
    configurable: true
    optional: true
    options:
    - name: "public_ip"
      label: "Internet Connected VMs (on supported IaaS providers)"

(Optional) Enable Floating Stemcells

Tanzu Operations Manager provides a feature called Floating Stemcells that allows Tanzu Operations Manager to quickly propagate a patched stemcell to all VMs in the deployment that have the same compatible stemcell. Both the broker deployment and the service instances deployed by the On-Demand Broker can make use of this feature. Enabling this feature can help ensure that all of your service instances are patched to the latest stemcell.

For the service instances to be installed with the latest stemcell automatically, ensure that the upgrade-all-service-instances errand is selected.

To enable floating stemcells for your tile, update your tile.yml file as follows:

  1. Implement floating stemcells.

    For example:

    job_types:
  templates:
  - name: broker
    manifest: |
      service_deployment:
        releases:
        - name: release-name
          version: 1.0.0
          jobs: [job_server]
        stemcells:
          - os: ubuntu-trusty
            version: (( $self.stemcell_version )) # Add this line

  2. Configure the stemcell_criteria.

    For example:

    ---
name: example-on-demand-service
product_version: 1.0.0
stemcell_criteria:
  os: ubuntu-trusty
  version: '3312'
  enable_patch_security_updates: true  # Add this line

(Optional) Allow Secure Binding

You can give Tanzu Operations Manager operators the option to enable secure binding. If secure binding is enabled, binding credentials are stored securely in runtime CredHub. When users create bindings or service keys, ODB passes a secure reference to the service credentials through the network instead of plain text.

Important To use the secure binding credentials feature you must use Tanzu Operations Manager v2.0 or later.

To include the option to enable secure binding, update your tile.yml file as follows:

  1. Add secure_binding_credentials to the top-level properties block in the on-demand broker manifest.

    For example:

    secure_binding_credentials:
  enabled: true
  authentication:
    uaa:
      client_id: CREDHUB_CLIENT_ID # client ID used by broker when communicating with CredHub
      client_secret: CREDHUB_CLIENT_SECRET # client secret used by broker when communicating with CredHub
      ca_cert: UAA_CA_CERT

  2. To let users activate and deactivate this feature in the Tanzu Operations Manager UI, you need to make some changes to your tile’s metadata file:

    1. Add a form field to allow the user to activate or deactivate secure bindings. For an example form field, see the example-kafka-on-demand-tile in GitHub.

    2. Add an element in property_blueprints that reads the setting in the form field and exposes the appropriate manifest snippet for CredHub and secure binding. For an example property_blueprints section, see the example-kafka-on-demand-tile in GitHub.

    3. Change the broker job so that it consumes the CredHub BOSH link from the property_blueprints section. For an example broker job, see the example-kafka-on-demand-tile in GitHub.

    4. Change the broker job so that it consumes the generated secure bindings manifest snippet. For an example broker job, see the example-kafka-on-demand-tile in GitHub.

(Optional) Configure Maintenance Information

Maintenance information is used to uniquely describe the deployed version of a service instance. It is used by the platform to determine when an upgrade is available for that instance, allowing app developers to trigger the upgrade.

In the broker manifest, it is defined in the service_catalog, at global and plan levels, as in the following example:

# broker properties
service_catalog:
  maintenance_info: # applies to all plans
    public:
      stemcell: 1818
      docker: v2.4.6
    private:
      SECRET: PASSWORD
    version: 1.4.7-rc.1 # must be semver
    description: "OS image update.\nExpect downtime." # optional
  plans:
  - name: STABLE
    maintenance_info: # plan-specific
      public:
        size: 3
        docker: v3.0.0 # overwrites global configuration
      version: 7.0.0
  - name: EDGE
    maintenance_info: {}

When the Service Catalog is requested by the platform, the broker returns the maintenance_info properties per plan, where:

  • Plan-specific configuration takes precedence over global configuration
  • maintenance_info.public is returned as configured
  • maintenance_info.version is returned as configured
  • maintenance_info.description is returned as configured
  • All properties in maintenance_info.private are aggregated and hashed into a single string

For the previous example manifest, the catalog response is:

{
    "services": [{
        "name": "MY-SERVICE",
        "plans": [{
            "name": "STABLE",
            "maintenance_info": {
                "public": {
                    "stemcell": "1818",
                    "docker": "v3.0.0",
                    "size": 3
                },
                "private": "HASHED-VALUE",
                "version": "7.0.0",
                "description": "OS image update.\nExpect downtime."
            }
        }, {
            "name": "EDGE",
            "maintenance_info": {
                "public": {
                    "stemcell": "1818",
                    "docker": "v2.4.6"
                },
                "private": "HASHED-VALUE",
                "version": "1.4.7-rc.1"
            }
        }]
    }]
}

VMware recommends using YAML anchors and references to avoid repeating maintenance information values within the manifest. For instance, the stemcell version can be anchored with the &stemcellVersion annotation and then referenced in the maintenance information with the *stemcellVersion tag.

Note The Open Service Broker API only supports maintenance_info.version and maintenance_info.description. VMware discourages the use of public and private if Cloud Foundry is the platform communicating to the broker.

check-circle-line exclamation-circle-line close-line
Scroll to top icon