After the Access Point appliance is configured as the authentication agent in the RSA SecurID server, you must add the RSA SecurID configuration information to the Access Point appliance.
Verify that RSA Authentication Manager (the RSA SecurID server) is installed and properly configured.
Download the compressed sdconf.rec file from the RSA SEcurID server and extract the server configuration file.
- In the admin UI Configure Manually section, click Select.
- In the General Settings Authentication Settings section, click Show.
- Click the gearbox in the RSA SecurID line.
- Configure the RSA SecurID page.
Information used and files generated on the RSA SecurID server are required when you configure the SecurID page.
Enable RSA SecurID
Change NO to YES to enable SecurID authentication.
The name is securid-auth.
*Number of Iterations
Enter the number of authentication attempts that are allowed. This is the maximum number of failed login attempts when using the RSA SecurID token. The default is 5 attempts.Note:
When more than one directory is configured and you implement RSA SecurID authentication with additional directories, configure Number of authentication attempts allowed with the same value for each RSA SecurID configuration. If the value is not the same, SecurID authentication fails.
*External HOST Name
Enter the IP address of the Access Point instance. The value you enter must match the value you used when you added the Access Point appliance as an authentication agent to the RSA SecurID server.
*Internal HOST Name
Enter the value assigned to the IP address prompt in the RSA SecurID server.
Click Change to upload the RSA SecurID server configuration file. First, you must download the compressed file from the RSA SecurID server and extract the server configuration file, which by default is named sdconf.rec.
*Name Id Suffix
Enter the nameId that enables View to provide TrueSSO experience.