PowerShell scripts prepare your environment with all the configuration settings. When you run the PowerShell script to deploy Unified Access Gateway, the solution is ready for production on first system boot.

Important: With a PowerShell deployment, you can provide all the settings in the INI file, and the Unified Access Gateway instance is production-ready as soon as it is booted up. If you do not want to change any settings post-deployment, you need not provide the Admin UI password.

However, both Admin UI and the API are not available if the Admin UI password is not provided during deployment.

Note:
  • If you do not provide the Admin UI password at the time of deployment, you cannot add a user later to enable access to either the Admin UI or the API. You must redeploy your Unified Access Gateway instance with a valid password if you want to add an Admin UI user.
  • Unified Access Gateway 3.5 and later includes an optional sshEnabled INI property. Setting sshEnabled=true in the [General] section of the PowerShell INI file automatically enables ssh access on the deployed appliance. VMware does not generally recommend enabling ssh on Unified Access Gateway except in certain specific situations and where access can be restricted. This capability is mainly intended for Amazon AWS EC2 deployments where an alternative console access is not available.
    Note: For more information on Amazon AWS EC2 see, Unified Access Gateway PowerShell Deployment to Amazon Web Services.

    If sshEnabled=true is not specified or is set to false then the ssh is not enabled.

    Enabling ssh access on Unified Access Gateway for vSphere, Hyper-V or Microsoft Azure deployments is not generally required as console access with those platforms can be used. If root console access is required for Amazon AWS EC2 deployment, then set sshEnabled=true. In cases where ssh is enabled, TCP port 22 access must be restricted in firewalls or security groups to source IP addresses of individual administrators. EC2 supports this restriction in the EC2 Security Group associated with the Unified Access Gateway network interfaces.

  • Unified Access Gateway 2009 includes the sysLogType property in the INI file to enable syslog configuration.
  • With Unified Access Gateway 2009, you can include the parameters in the INI file for creating low-priviledged admin users with monitoring roles. Creating superuser admin user is not supported.

Prerequisites

  • For a Hyper-V deployment, and if you are upgrading Unified Access Gateway with static IP, delete the older appliance before deploying the newer instance of Unified Access Gateway.
  • Verify that the system requirements are appropriate and available for use.

    This is a sample script to deploy Unified Access Gateway in your environment.

    Figure 1. Sample PowerShell Script
    Sample PowerShell script to deploy UAG appliance.

Procedure

  1. Download the Unified Access Gateway OVA from My VMware to your Windows machine.
  2. Download the uagdeploy-XXX.zip files into a folder on the Windows machine.
    The ZIP files are available at the VMware Download page for Unified Access Gateway.
  3. Open a PowerShell script and modify the directory to the location of your script.
  4. Create a INI configuration file for the Unified Access Gateway virtual appliance.
    For example: Deploy a new Unified Access Gateway appliance UAG1. The configuration file is named uag1.ini. This file contains all the configuration settings for UAG1. You can use the sample INI files in the uagdeploy.ZIP file to create the INI file and modify the settings appropriately.
    Note:
    • You can have unique INI files for multiple Unified Access Gateway deployments in your environment. You must change the IP Addresses and the name parameters in the INI file appropriately to deploy multiple appliances.
    • To convert the private key from PKCS8 to PKCS1, thats is, from the BEGIN PRIVATE KEY format to BEGIN RSA PRIVATE KEY format, run the following openssl command:

      openssl rsa -in key.pem -out keyrsa.pem

      To convert PKCS#12 format file with either a .p12 or .pfx file extension and to ensure the key is an RSA key, run the following commands:

      openssl pkcs12 -in cert.pfx -nokeys -out cert.pem

      openssl pkcs12 -in cert.pfx -nodes -nocerts -out key.pem

      openssl rsa -in key.pem -check -out keyrsa.pem

    Example of the INI File to modify. 
    [General]
netManagementNetwork=
netInternet=
netBackendNetwork=
name=
dns = 192.0.2.1 192.0.2.2
dnsSearch = example1.com example2.com
ip0=10.108.120.119
diskMode=
source=
defaultGateway=10.108.120.125
target=
ds=
deploymentOption=onenic
authenticationTimeout=300000
fipsEnabled=false
sysLogType=TCP
uagName=UAG1
locale=en_US
ipModeforNIC3=DHCPV4_DHCPV6
tls12Enabled=true
ipMode=DHCPV4_DHCPV6
requestTimeoutMsec=10000
ipModeforNIC2=DHCPV4_DHCPV6
tls11Enabled=false
clientConnectionIdleTimeout=180
tls10Enabled=false
adminCertRolledBack=false
cookiesToBeCached=none
healthCheckUrl=/favicon.ico
quiesceMode=false
syslogUrl=10.108.120.108:514
syslogSystemMessagesEnabled=false
isCiphersSetByUser=false
tlsPortSharingEnabled=true
ceipEnabled=true
bodyReceiveTimeoutMsec=15000
monitorInterval=60
cipherSuites=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
adminPasswordExpirationDays=90
httpConnectionTimeout=120
isTLS11SetByUser=false
sessionTimeout=36000000
ssl30Enabled=false
snmpEnabled= TRUE | FALSE
ntpServers=ipOrHostname1 ipOrHostname2
fallBackNtpServers=ipOrHostname1 ipOrHostname2
sshEnabled=
sshPasswordAccessEnabled=
sshKeyAccessEnabled=
sshPublicKey1=
adminDisclaimerText=

[WebReverseProxy1]
proxyDestinationUrl=https://10.108.120.21
trustedCert1=
instanceId=view
healthCheckUrl=/favicon.ico
userNameHeader=AccessPoint-User-ID
proxyPattern=/(.*)
landingPagePath=/
hostEntry1=10.108.120.21 HZNView.uagqe.auto.com

[Horizon]
proxyDestinationUrl=https://enterViewConnectionServerUrl
trustedCert1=
gatewayLocation=external
disableHtmlAccess=false
healthCheckUrl=/favicon.ico
proxyDestinationIPSupport=IPV4
smartCardHintPrompt=false
queryBrokerInterval=300
proxyPattern=(/|/view-client(.*)|/portal(.*)|/appblast(.*))
matchWindowsUserName=false
windowsSSOEnabled=false

[Airwatch]
tunnelGatewayEnabled=true
tunnelProxyEnabled=true
pacFilePath=
pacFileURL=
credentialFilePath=
apiServerUsername=domain\apiusername
apiServerPassword=*****
proxyDestinationUrl=https://null
ntlmAuthentication=false
healthCheckUrl=/favicon.ico
organizationGroupCode=
apiServerUrl=https://null
airwatchOutboundProxy=false
outboundProxyHost=1.2.3.4
outboundProxyPort=3128
outboundProxyUsername=proxyuser
outboundProxyPassword=****
reinitializeGatewayProcess=false
airwatchServerHostname=tunnel.acme.com
trustedCert1=c:\temp\CA-Cert-A.pem
hostEntry1=1.3.5.7 backend.acme.com

[AirwatchSecureEmailGateway]
airwatchOutboundProxy=false
memConfigurationId=abc123
apiServerUsername=domain\apiusername
healthCheckUrl=/favicon.ico
apiServerUrl=https://null
outboundProxyHost=1.2.3.4
outboundProxyPort=3128
outboundProxyUsername=proxyuser
outboundProxyPassword=****
reinitializeGatewayProcess=false
airwatchServerHostname=serverNameForSNI
apiServerPassword=****
trustedCert1=c:\temp\CA-Cert-A.pem
pfxCerts=C:\Users\admin\My Certs\mycacerts.pfx
hostEntry1=1.3.5.7 exchange.acme.com

[AirWatchContentGateway]
cgConfigId=abc123
apiServerUrl=https://null
apiServerUsername=domain\apiusername
apiServerPassword=*****
outboundProxyHost=
outboundProxyPort=
outboundProxyUsername=proxyuser
outboundProxyPassword=*****
airwatchOutboundProxy=false
hostEntry1=192.168.1.1 cgbackend.acme.com
trustedCert1=c:\temp\CA-Cert-A.pem
ntlmAuthentication=false
reinitializeGatewayProcess=false
airwatchServerHostname=cg.acme.com

[SSLCert]
pemPrivKey=
pemCerts=
pfxCerts=
pfxCertAlias=

[SSLCertAdmin]
pemPrivKey=
pemCerts=
pfxCerts=
pfxCertAlias=

[JWTSettings1]
publicKey1=
publicKey2=
publicKey3=
name=JWT_1

[JWTSettings2]
publicKey1=
publicKey2=
name=JWT_2

[AdminUser1]
name=monitoringUser1
enabled=true

[AdminUser2]
name=monitoringUser2
enabled=true

[OutboundProxySettings1]
proxyUrl=
name=
proxyType=HTTP
includedHosts1=
includedHosts2=
trustedCert1=

[OutboundProxySettings2]
proxyUrl=
name=
proxyType=HTTP
includedHosts1=
includedHosts2=
trustedCert1=
    Note: Passwords for the low-privileged admin users with monitoring roles are provided as parameter to the PowerShell script. If the password is not provided, then the user is prompted to enter the password. Provide the parameter as newAdminUserPwd and the parameter value similar to monitoringUser1:P@ssw0rd1;monitoringUser2:P@ssw0rd2. The enabled parameter in the INI file is optional and defaults to true if the parameter is unavailable.
  5. To make sure that the script execution is not restricted., type the PowerShell set-executionpolicy command. 
    set-executionpolicy -scope currentuser unrestricted
    You only need to do this once to remove the restriction.
    1. (Optional) If there is a warning for the script, run the following command to unblock the warning: unblock-file -path .\uagdeploy.ps1
  6. Run the command to start the deployment. If you do not specify the .INI file, the script defaults to ap.ini. 
    .\uagdeploy.ps1 -iniFile uag1.ini
  7. Enter the credentials when prompted and complete the script.
    Note: If you are prompted to add the fingerprint for the target machine, enter yes.
    Unified Access Gateway appliance is deployed and available for production.

Results

For more information on PowerShell scripts, see https://communities.vmware.com/docs/DOC-30835.

What to do next

If you want to upgrade Unified Access Gateway while preserving the existing settings, edit the .ini file to change the source reference to the new version and rerun the .ini file: uagdeploy.ps1 uag1.ini. This process can take up to 3 minutes. 
[General]
name=UAG1
source=C:\temp\euc-unified-access-gateway-3.2.1-7766089_OVF10.ova

If you want to upgrade with zero service interruption, see Upgrade with Zero Downtime.