Add a Dell Switch

You can add Dell switches as a data source in VMware Aria Operations for Networks.

Prerequisites

You must verify the following information:

• The data source and its version is supported in VMware Aria Operations for Networks. For more information, see Supported Products and Versions.
• The data source follows VMware Ports and Protocols supported in VMware Aria Operations for Networks. For more information, see VMware Ports and Protocols.

You must have the following permissions:

• Read-only user: VMware Aria Operations for Networks requires read-only third-party device credentials (passwords) to access the SSH data. This user needs to have the Network Operator role. These passwords are added when configuring the third-party data provider in VMware Aria Operations for Networks user interface.
• Read-only SNMP user: VMware Aria Operations for Networks uses SNMP to collect metrics information from third-party devices (switches, routers, firewalls, and so on). The third-party devices must have SNMP enabled and be accessible from VMware Aria Operations for Networks.

Procedure

1. From the left navigation pane, go to Settings > Accounts and Data Sources.
2. Click Add Source.
3. Under Routers & Switches, click the Dell devices that you want to add and provide the following details:

   Option	Action
   Collector VM	Select a collector VM from the drop-down menu.
   IP Address/FQDN	Enter the IP address or the FQDN details.
   Username	Enter the user name.
   Password	Enter the password.

   Note: If you want to add Dell S4048, Z9100, or S6000 devices in VMware Aria Operations for Networks as a data source and if that Dell device is running on OS 10, then you must select Dell OS10 as an account or a source type while adding that Dell device as a data source in VMware Aria Operations for Networks.
4. Click Validate.
5. To enable a richer data collection, click Use SNMP (recommended for richer data collection) check box, and do the following:
   1. From the SNMP Version drop-down menu, select an SNMP version. Depending on which version of SNMP you have selected, do the following:

      Option	Action
      2c	In the Community String text box, enter a community string.
      3	Enter Username, Context Name. From the Authentication Type drop-down, select an authentication type and enter the Authentication Password. From the Privacy Type drop-down, select a privacy type and enter the Privacy Password.

6. Define the polling interval for the configuration data collection. You can set the polling interval from 10 minutes to 7 days.
   • Preset - Select the interval time from the predefined time set.
   • Custom Interval - Set a value and select Minutes, Hours, and Days.
   • Fixed Schedule - Select the days and set the time to schedule the interval.
7. (Optional) In the Nickname text box, enter a nickname.
8. (Optional) In the Notes text box, add a note if necessary.
9. Click Submit.

What to do next

For Dell OS10 Switches, Enable telemetry on Dell OS10 switches.

VMware Aria Operations for Networks supports the following features of the following Dell switches:

• Dell Froce10 MXL 10
  • Neighbor Discovery (LLDP)
  • Layer 2 Switching
  • VLAN
  • Layer 3 Routing (IPv4)
  • Redundancy (VRRP)
• Dell OS10 (S4048, S5200)
  • Neighbor Discovery (LLDP)
  • Layer 2 Switching
  • VLAN
  • Layer 3 Routing (IPv4)
  • VRF (Virtual routing and forwarding)
  • Redundancy (VRRP)
• Dell PowerConnect 8024
  • Neighbor Discovery (LLDP)
  • Layer 2 Switching
  • VLAN
  • Layer 3 Routing (IPv4)
• Dell S4048 (OS9)
  • Neighbor Discovery (LLDP)
  • Layer 2 Switching
  • VLAN
  • Layer 3 Routing (IPv4)
  • Redundancy (VRRP)
• Dell S6000 and Dell Z9100
  • Neighbor Discovery (LLDP)
  • Layer 2 Switching
  • VLAN
  • Layer 3 Routing (IPv4)
  • VRF
  • Redundancy (VRRP)