CLI Top-Level Commands

This section elaborates the top-level commands and their application.

Following are top-level commands shown when pressing the Tab twice from the shell:

Command	Description
attach	Connect to a remote Controller or SE. Similar to SSH.
clear	Clear the statistics or value of a designated object.
configure	Create or modify a new or existing object, such as a virtual service, pool, profile, and so on.
convert	Import and convert a configuration from non-VMware load balancers.
copy	Copy a file, such as a packet capture or tech-support file.
debug	Change debug settings or perform packet captures.
delete	Delete an object. Some objects may have dependencies which must be resolved first.
do	Execute a show command without exiting the current location or sub-mode.
export	Backup the system configuration or a single virtual service configuration.
import	Import a backed up (exported) complete or virtual service specific configuration.
initialplacement	Move a virtual service using manual placement mode to a different SE.
purge	Remove a file, such as a packet capture or tech-support file.
rebalance	Realign the SEs handing virtual services within an SE group.
reboot	Reboot part or all of the system. It can also wipe configuration.
rediscover	VMware-specific: Initiate discovery of networks and VMs.
restart	Deactivate, then re-activate a virtual service.
scalein	Reduce by one the number of SEs handling a virtual service in manual placement mode.
scaleout	Increase by one the number of SEs handling a virtual service in manual placement mode.
show	Show detailed information and stats on any Avi Load Balancer object.
switchto	Switch into a different tenant.
terminal	Alter the shell's terminal settings.
upgrade	Initiate an upgrade of the Avi Load Balancer system.
upload	Upload a specified tech-support debug file to VMware.
verifylogin	Validate login settings to a remote orchestrator such as vCenter, APIC, or OpenStack.
watch	Update the result of a command, such as show, every few seconds.

attach

Description	Connect to a remote Controller or SE. Similar to SSH.
Example	Attach serviceengine Avi-se-arjnz
Top Level Flags:
controller	Attach to a Controller shell.
serviceengine	Attach to a SE shell.

configure

Description	Create or modify a new or existing object, such as a virtual service, Pool, or Profile.
Example	: > configure pool Test
Top-Level Flags:
actiongroupconfig	Create or modify an Action Group Config.
alertconfig	Create or modify an Alert Config.
alertemailconfig	Create or modify an Alert Email Config.
alertscriptconfig	Create or modify an Alert Script Config.
alertsyslogconfig	Create or modify an Alert Syslog Config.
analyticsprofile	Create or modify an Analytics Profile.
application	Create or modify an Application.
applicationpersistenceprofile	Create or modify an Application Persistence Profile.
applicationprofile	Create or modify an Application Profile.
authprofile	Create or modify an Auth Profile.
cloud	Create or modify a Cloud.
cluster	Create or modify a Cluster.
controller	Create or modify Controller properties.
healthmonitor	Create or modify a Health Monitor.
httppolicyset	Create or modify an HTTP Policy Set.
ipaddrgroup	Create or modify an IP Address Group.
network	Create or modify a Network.
networkprofile	Create or modify a Network Profile.
networksecuritypolicy	Create or modify a Network Security Policy.
pkiprofile	Create or modify a PKI Profile.
pool	Create or modify a Pool.
role	Create or modify a Role.
serviceengine	Create or modify a Service Engine.
serviceenginegroup	Create or modify a Service Engine Group.
serviceengineproperties	Create or modify Service Engine properties.
sslkeyandcertificate	Create or modify an SSL Key and Certificate Request.
sslprofile	Create or modify an SSL Profile.
stringgroup	Create or modify a String Group.
systemconfiguration	Create or modify a System Configuration.
tenant	Create or modify a Tenant.
user	Create or modify a User.
virtualservice	Create or modify a Virtual Service.
vrfcontext	Create or modify a VRF Context.
vsdatascriptset	Create or modify a virtual service DataScript Set.

convert

Description	Import and convert a configuration from non-VMware load balancers. Supports conversion from F5 BIG-IP Local Traffic Manager configuration. Imported Virtual Services start in a disabled state to avoid IP conflicts.
Example	convert bigip_configuration
Top-Level Flags:
bigip_ip_addr	BIGIP IP address
filename	Avi Load Balancer config file name.
password	BIGIP Password
username	BIGIP Username
virtualservername	Convert virtualserver. Name is of the form /partition/virtualservername

copy

Description	Copy a file, such as a packet capture or tech-support file.
Example	copy file source/tmp/old destination /tmp/new
Top-Level Flag:
source	The source of the original file and path.
destination	The destination of the new file and path.

debug

Description	Change debug settings or perform packet captures.
Example	: > debug virtualservice Test-VS
Top-Level Flags:
controller	Controller-specific debug options.
serviceengine	Service Engine-specific debug options.
virtualservice	Virtual service specific debug options, including packet capture.

delete

Description	Delete an object. Some objects may have dependencies that must be resolved first.
Example	delete pool Test-Pool
Top-Level Flags:
actiongroupconfig	Delete Action Group Config.
alert	Delete Alert.
alertconfig	Delete Alert Config.
alertemailconfig	Delete Alert Email Config.
alertscriptconfig	Delete Alert Script Config.
alertsyslogconfig	Delete Alert Syslog Config.
application	Delete Application.
applicationpersistenceprofile	Delete Application Persistence Profile.
applicationprofile	Delete Application Profile.
authprofile	Delete Auth Profile.
cloud	Delete Cloud.
healthmonitor	Delete Health Monitor.
httppolicyset	Delete HTTP Policy Set.
ipaddrgroup	Delete IP Address Group.
networkprofile	Delete Network Profile.
networksecuritypolicy	Delete Network Security Policy.
pkiprofile	Delete PKI Profile.
pool	Delete Pool.
role	Delete Role.
serviceengine	Delete Service Engine.
serviceenginegroup	Delete Service Engine Group.
sslkeyandcertificate	Delete SSL Key and Certificate Request.
sslprofile	Delete SSL Profile.
stringgroup	Delete String Group.
tenant	Delete Tenant.
user	Delete User.
virtualservice	Delete Virtual Service.
vrfcontext	Delete VRF Context.
vsdatascriptset	Delete virtual service DataScript Set.

do

Description	Execute a show command without exiting the current location or sub-model.
Example	do show debug flags virtualservice Test-VS
Top-Level Flags:
show	Show detailed information and stats for any Avi Load Balancer object.

export

Description	Back up the system configuration or a single virtual service configuration.
Example	export configuration file /tmp/backup_config export virtualservice Test-VS file /tmp/Test-VS
Top-Level Flags:
configuration	Export the entire Avi Load Balancer configuration in JSON format.
serviceengine	Export the SE OVA file from Controller for manual install.
virtualservice	Export a specific virtual service configuration file including child objects.

import

Description	Import a backed up (exported) complete or virtual service specific configuration.
Example	import configuration file /tmp/backup_config
Top-Level Flags:

initialplacement

Description	Move a virtual service using manual placement mode to a different SE.
Example	initialplacement virtualservice Test-VS servicengine Avi-se-arjni
Top-Level Flags:
virtualservice	Specify the virtual service to be assigned to an SE.
serviceengine	Specify the name of the SE to receive the virtual service.

migrate

Description	Move a virtual service using manual placement (No Access or Read Access) mode to a different SE.
Example	migrate virtualservice Test-VS serviceengine Avi-se-arjni
Top-Level Flags:
from_se_ref	Specify the name of the source SE that has the virtual service.
to_host_ref	An option used with to_new_se, specifying the host upon which to create the new SE.
to_new_se	Create a new SE and migrate to it.
to_se_ref	Migrate to a specific existing SE.

purge

Description	Remove a file, such as a packet capture or tech-support file.
Example	purge file source /tmp/backup_config
Top-Level Flags:

rebalance

Description	In auto scale mode, sets the frequency upon which the Controller will Inspect an SE group to see if a virtual service to SE mapping mudt be adjusted, potentially resulting in a scale in, scale out, or migration.
Example	rebalance interval 10 se_group_ref My_SE_Group
Top-Level Flags:
interval	The frequency, in minutes. Default is 5.
se_group_ref	The name of the SE group to alter.

reboot

Description	Reboot part or all of the Avi Load Balancer system. It can also delete configuration. With no flags specified, all Controllers and SEs are rebooted.
Example	reboot
Top-Level Flags:
clean	Reset the Avi Load Balancer system's configuration and reboot the cluster. Consider making a backup first.
node	Reboot the virtual machine of a Controller within a cluster.
serviceengine	Reboot a specific SE. Virtual service disruption will depend on the high availability settings for the SE group.

rediscover

Description	VMware-specific: Initiate discovery of networks and VMs.
Example	rediscover vcenter My-vCenter
Top-Level Flags:

restart

Description	Disable then immediately re-enable a virtual service.
Example	restart virtualservice Test-VS
Top-Level Flags:

scalein

Description	Reduce by one the number of SEs handling a virtual service in manual placement mode. There must be a minimum of one SE.
Example	scalein virtualservice Test-VS
Top-Level Flags:
from_se_ref	Specify a non-primary SE to stop using for this virtual service.
scalein_primary	Migrate from the primary SE and discontinue use of the SE for this virtual service.

scaleout

Description	Increase by one the number of SEs handling a virtual service in manual placement.
Example	scaleout virtualservice Test-VS
Top-Level Flags:
to_host_ref	An option used with to_new_se, specifying where to create the new SE.
to_new_se	Create a new SE and scale out to it.
to_se_ref	Scale out to an existing SE.

show

Description	Show detailed information and stats on any Avi Load Balancer object.
Example	show virtualservice Test-VS summary
Top-Level Flags:
actiongroupconfig	Show info on an Action Group Config.
alert	Show info on an Alert.
alertconfig	Show info on an Alert Config.
alertemailconfig	Show info on an Alert Email Config.
alertscriptconfig	Show info on an Alert Script Config.
alertsyslogconfig	Show info on the an Syslog Config.
analyticsprofile	Show info on an Analytics Profile.
apic	Show info on the APIC Graph Instances.
application	Show info on an Application Folder.
applicationpersistenceprofile	Show info on an Application Persistence Profile.
applicationprofile	Show info on an Application Profile.
authprofile	Show info on an Auth Profile.
backups	Show available backup files.
cloud	Show info on the Cloud.
cluster	Show info on the Cluster.
config-consistency-check	Show config-consistency-check status.
config_events	Show info on the Event Log.
configuration	Show configuration.
controller	Show Controller properties.
cpuusage	Show Controller CPU usage.
debug	Show Virtual Service capture file.
debug-log	Show Service Engine debugs.
diskusage	Show Controller disk usage.
events	Show info on an Event Log.
file	Show files.
healthmonitor	Show info on a Health Monitor.
httppolicyset	Show info on an HTTP Policy Set.
ipaddrgroup	Show info on an IP Address Group.
jobs	Show all duration based jobs pending expiry.
License	Show info on the Controller License.
logcontrollermapping	Show mapping of Log Controllers for each virtual service.
logs-status	Show logs subsystem status.
memoryusage	Show Controller memory usage.
metricsmgr	Show info on a Metrics Entity Runtime.
network	Show info on a Network.
networkprofile	Show info on a Network Profile.
networksecuritypolicy	Show info on a Network Security Policy.
openstack_audit	Show OpenStack LBaaS vs Avi config audit reports.
pkiprofile	Show info on a PKI Profile.
placement	Show info on a Rm VRF Proto.
pool	Show info on a Pool.
role	Show info on a Role.
serviceengine	Show info on a Service Engine.
serviceenginegroup	Show info on a Service Engine Group.
serviceengineproperties	Show the Service Engine Properties.
seupgrade	Show an ongoing SE upgrade status.
sslkeyandcertificate	Show info on an SSL Key and Certificate.
sslprofile	Show info on an SSL Profile.
stringgroup	Show info on a String Group.
systemconfiguration	Show info on the System Configuration.
systemconfigurationruntime	Show info on the System Configuration Runtime.
tech-support	Show full tech support.
tenant	Show info on a Tenant.
terminal	Show the terminal settings.
transaction	Show more info on Transaction Stats.
upgrade	Show upgrade status if one is in-progress.
user	Show info on the User.
vcenter	Show info on the specified VMs.
version	Show a Controller node's version.
vinfra	Show info on the VI Datastore Contents.
virtualservice	Show info on a Virtual Service.
vrfcontext	Show info on a VRF Context.
vsdatascriptset	Show info on the virtual service DataScript Set.

switchto

Description	Switch into a different tenant.
Example	switchto tenant Tenant2
Top-Level Flags:

terminal

Description	Alter the shell's terminal settings.
Example	terminal session_timeout 240
Top-Level Flags:
length	Number of rows to show for pagination output. Greater than will pipe to more. Choose 0 for no pagination.
session_timeout	Alter the default 15 min timeout to keep an idle terminal session open.
timezone	Display timestamps in specified time zone.
unhide	Commands show additional flags. It is not recommended for casual use.

upgrade

Description	Initiate an upgrade of the Avi Load Balancer system. This may be done passively (by migrating each SE while upgrading) or disruptively (fast, but it will terminate existing client connections then begin the upgrade).
Example	upgrade system image_path /tmp/new_file
Top-Level Flags:
system	Upgrade the Avi Load Balancer system.
ui	Upgrade the Avi Load Balancer UI.

upload

Description	Generate and upload a tech-support debug file to VMware.
Example	upload tech-support debuglogs filter exclude_logs
Top-Level Flags:
exclude_archive	Exclude archived backups.
exclude_logs	Exclude client log files (virtual service logs), which could be quite large.
include_se	Include (non-significant) logs may be stored on the SEs.

verifylogin

Description	Validate the username, password, and path to a remote orchestrator such as vCenter, APIC, or OpenStack.
Example	verifylogin vcenter username admin password secret vcenter_url 10.1.1.1/login
Top-Level Flags:
apic	Verify access to an APIC controller.
openstack	Verify access to OpenStack.
vcenter	Verify access to a VMware vCenter controller.

watch

Description	Updates the result of a command such as show every few seconds.
Example	watch show pool Test-pool server detail | grep -e 'ip\| open_conns'
Top-Level Flags:
show	Select a valid show command syntax to update.