SR-IOV must be enabled on the CSP pNIC.

The following are the steps to enable SR-IOV on enp94s0f0:

Procedure

  1. Navigate to Configuration > SRIOV Config. Click on the settings icon for the Enable SRIOV option.
  2. Under SRIOV Configuration, set the Number of VFs to a desired number and Switch Mode to veb.
    Figure 1. SRIOV CSP 2100
  3. Confirm the SR-IOV configuration.
  4. Repeat the above steps to configure enp94s0f1 for SR-IOV if required.