Use the VxRail VI Configuration wizard to create a VI workload domain.
Procedure
- In the SDDC Manager UI navigation, Inventory > Workload Domains .
- Click + Workload Domain and then select VI-VxRail Virtual Infrastructure Setup.
- Make sure the prerequisties are met. See Prerequisites for a Workload Domain. To continue, click GET STARTED.
- Select the type of storage to use for this workload domain. Click SELECT.
The VI - VxRail Virtual Infrastructure Setup wizard opens.
- Provide the following information to complete the VxRail VI Configuration.
Option Description VxRail Manager - VxRail Manager Hostname (must be an FQDN)
CONNECT to VxRail Manager and confirm the SSL thumbprints of VxRail Manager.
- VxRail Manager Admin Credentials
- Admin Username
- Admin Password
- Confirm Admin Password
- VxRail Manager Root Credentials
- Root Username
- Root Password
- Confirm Root Password
General Info Provide basic information about this virtual infrastructure. - Virtual Infrastructure Name - The name must be unique and contain between 3 and 20 characters. The VI name can include letters, numbers, and hyphens, but it cannot include spaces.
- Datacenter Name
Cluster Enter the details for the first cluster that will be created in this new workload domain. The name must be unique and contain between 3 and 80 characters. The cluster name can include letters, numbers, and hyphens, and it can include spaces.
Compute Provide information about the vCenter configuration. - vCenter FQDN (Must be a fully qualified domain name. (FQDN)
- vCenter IP address
- vCenter Subnet Mask
- vCenter Default Gateway
- vCenter Root Password
- Confirm vCenter Root Password
Networking - NSX-T Manager
- Cluster FQDN
- Cluster IP
- FQDN 1
- IP Address 1
- FQDN 2
- IP Address 2
- FQDN 3
- IP Address 3
- Subnet Mask
- Default Gateway
- Admin Password
- Confirm Admin Password
- Overlay Networking
- VLAN ID
- IP Allocation: DHCP or Static IP Pool (See descriptions below)
Option Description DHCP With this option VMware Cloud Foundation uses DHCP for the Host Overlay Network TEPs. A DHCP server must be configured on the NSX-T host overlay (Host TEP) VLAN. When NSX creates TEPs for the VI workload domain, they are assigned IP addresses from the DHCP server.
Static IP Pool With this option VMware Cloud Foundation uses a static IP pool for the Host Overlay Network TEPs. You can re-use an existing IP pool or create a new one. To create a new static IP Pool provide the following information:- Pool Name
- Description
- CIDR
- IP Range.
- Gateway IP
Note: You cannot stretch a cluster that uses static IP addresses for the NSX-T Host Overlay Network TEPs.Option Description Host Selection Add ESXi hosts with similar or identical configurations across all cluster members, including similar or identical storage configurations. A minimum of 3 hosts are required. Two-step process to select and add hosts. - Select hosts to add to cluster
Note: The Primary node is selected by default
- Provide hosts details (QUICKFILL OPTIONS is available)
Switch Configuration Provide the distributed switch configuration to be applied to the hosts in the VxRail cluster. Select the predefined NIC configuration profile and review the preconfigured distributed switches and details. VDS and Portgroup name information is configured and can be edited here. Note: VDS configuration requires homogeneous host network adapters across all hosts. Only adapters of same enumeration across all hosts can be used for configuring VDS.Host and VM Networks Configure Host and VM network details. - Management Network: VLAN ID, CIDR, and Gateway
- vSAN: VLAN ID, CIDR, Gateway, and IP Range
- vMotion Network: VLAN ID, CIDR, Gateway, and IP Range
Licenses Select the licenses for NSX-T, VMware vSAN, and VMware vSphere. Note: If you are using VCF+, license keys are not required.Review Review and confirm the Workload Domain settings. Validation Validates the configuration - VxRail Manager Hostname (must be an FQDN)
- On the Validation page, wait until all of the inputs have been successfully validated and then click FINISH.
If validation is unsuccessful, you cannot proceed. Use the Back button to modify your settings and try again.Create a VxRail Workload Domain task is triggered.