ESXi Design for VMware Cloud Foundation

In the design of the ESXi host configuration for your VMware Cloud Foundation environment, consider the resources, networking, and security policies that are required to support the virtual machines in each workload domain cluster.

Logical Design for ESXi for VMware Cloud Foundation

In the logical design for ESXi, you determine the high-level integration of the ESXi hosts with the other components of the VMware Cloud Foundation instance for providing virtual infrastructure to management and workload components.

To provide the resources required to run the management and workload components of the VMware Cloud Foundation instance, each ESXi host consists of the following elements:

• CPU and memory

• Storage devices

• Out of band management interface

• Network interfaces

Figure 1. ESXi Logical Design for VMware Cloud Foundation

Sizing Considerations for ESXi for VMware Cloud Foundation

You decide on the number of ESXi hosts per cluster and the number of physical disks per ESXi host.

For detailed sizing based on the overall profile of the VMware Cloud Foundation instance you plan to deploy, see VMware Cloud Foundation Planning and Preparation Workbook.

The configuration and assembly process for each system should be standardized, with all components installed in the same manner on each ESXi host. Because standardization of the physical configuration of the ESXi hosts removes variability, the infrastructure is easily managed and supported. ESXi hosts are deployed with identical configuration across all cluster members, including storage and networking configurations. For example, consistent PCIe card slot placement, especially for network interface controllers, is essential for accurate mapping of physical network interface controllers to virtual network resources. By using identical configurations, you have an even balance of virtual machine storage components across storage and compute resources.

Table 1. ESXi Server Sizing Considerations by Hardware Element

Hardware Element	Considerations
CPU	Total CPU requirements for the workloads that are running in the cluster. Host failure and maintenance scenarios. Keep the overcommitment ratio vCPU-to-pCPU less than or equal to 2:1 for the management domain and less than or equal to 8:1 for VI workload domains . Additional third-party management components. Number of physical cores, not logical cores. Simultaneous multithreading (SMT) technologies in CPUs, such as hyper-threading in Intel CPUs, improve CPU performance by allowing multiple threads to run in parallel on the same CPU core. Although a single CPU core can be viewed as two logical cores, the performance enhancement will not be equivalent to 100% more CPU power. It will also differ from one environment to another.
Memory	Total memory requirements for the workloads that are running in the cluster. When sizing memory for the ESXi hosts in a cluster, to reserve the resources of one host for failover or maintenance, set the admission control setting to N+1, which reserves the resources of one host for failover or maintenance. vSAN OSA. Number of vSAN disk groups and disks on an ESXi host. To support the maximum number of disk groups, you must provide 32 GB of RAM. For more information about disk groups, including design and sizing guidance, see Administering VMware vSAN in the vSphere documentation. vSAN ESA. You must provide 512 GB of RAM.
Storage	Use high-endurance device such as a hard drive or SSD for boot device Use 128-GB boot device to maximize the space available for ESX-OS Data vSAN OSA Provide at least one 600-GB cache disk. Use a minimum of two capacity disks. vSAN ESA. Use a minimum of two NVME devices. Use hosts with homogeneous configuration.

ESXi Design Requirements and Recommendations for VMware Cloud Foundation

The requirements for the ESXi hosts in a workload domain in VMware Cloud Foundation are related to the system requirements of the workloads hosted in the domain. The ESXi requirements include number, server configuration, amount of hardware resources, networking, and certificate management. Similar best practices help you design optimal environment operation.

ESXi Server Design Requirements

You must meet the following design requirements for the ESXi hosts in a workload domain in a VMware Cloud Foundation deployment.

Table 2. Design Requirements for ESXi Server Hardware

Requirement ID	Design Requirement	Requirement Justification	Requirement Implication
VCF-ESX-REQD-CFG-001	Install no less than the minimum number of ESXi hosts required for the cluster type being deployed.	Ensures availability requirements are met. If one of the hosts is not available because of a failure or maintenance event, the CPU overcommitment ratio becomes 2:1.	None.
VCF-ESX-REQD-CFG-002	Ensure each ESXi host matches the required CPU, memory and storage specification.	Ensures workloads will run without contention even during failure and maintenance conditions.	Assemble the server specification and number according to the sizing in VMware Cloud Foundation Planning and Preparation Workbook which is based on projected deployment size.
VCF-ESX-REQD-SEC-001	Regenerate the certificate of each ESXi host after assigning the host an FQDN.	Establishes a secure connection with VMware Cloud Builder during the deployment of a workload domain and prevents man-in-the-middle (MiTM) attacks.	You must manually regenerate the certificates of the ESXi hosts before the deployment of a workload domain.

ESXi Server Design Recommendations

In your ESXi host design for VMware Cloud Foundation, you can apply certain best practices.

Table 3. Design Recommendations for ESXi Server Hardware

Recommendation ID	Recommendation	Justification	Implication
VCF-ESX-RCMD-CFG-001	Use vSAN ReadyNodes with vSAN storage for each ESXi host in the management domain.	Your management domain is fully compatible with vSAN at deployment. For information about the models of physical servers that are vSAN-ready, see vSAN Compatibility Guide for vSAN ReadyNodes.	Hardware choices might be limited. If you plan to use a server configuration that is not a vSAN ReadyNode, your CPU, disks and I/O modules must be listed on the VMware Compatibility Guide under CPU Series and vSAN Compatibility List aligned to the ESXi version specified in VMware Cloud Foundation 5.1 Release Notes.
VCF-ESX-RCMD-CFG-002	Allocate hosts with uniform configuration across the default management vSphere cluster.	A balanced cluster has these advantages: Predictable performance even during hardware failures Minimal impact of resynchronization or rebuild operations on performance	You must apply vendor sourcing, budgeting, and procurement considerations for uniform server nodes on a per cluster basis.
VCF-ESX-RCMD-CFG-003	When sizing CPU, do not consider multithreading technology and associated performance gains.	Although multithreading technologies increase CPU performance, the performance gain depends on running workloads and differs from one case to another.	Because you must provide more physical CPU cores, costs increase and hardware choices become limited.
VCF-ESX-RCMD-CFG-004	Install and configure all ESXi hosts in the default management cluster to boot using a 128-GB device or larger.	Provides hosts that have large memory, that is, greater than 512 GB, with enough space for the scratch partition when using vSAN.	None.
VCF-ESX-RCMD-CFG-005	Use the default configuration for the scratch partition on all ESXi hosts in the default management cluster.	If a failure in the vSAN cluster occurs, the ESXi hosts remain responsive and log information is still accessible. It is not possible to use vSAN datastore for the scratch partition.	None.
VCF-ESX-RCMD-CFG-006	For workloads running in the default management cluster, save the virtual machine swap file at the default location.	Simplifies the configuration process.	Increases the amount of replication traffic for management workloads that are recovered as part of the disaster recovery process.
VCF-ESX-RCMD-NET-001	Place the ESXi hosts in each management domain cluster on a host management network that is separate from the VM management network.	Enables the separation of the physical VLAN between ESXi hosts and the other management components for security reasons.	Increases the number of VLANs required.
VCF-ESX-RCMD-NET-002	Place the ESXi hosts in each VI workload domain on a separate host management VLAN-backed network.	Enables the separation of the physical VLAN between the ESXi hosts in different VI workload domains for security reasons.	Increases the number of VLANs required. For each VI workload domain, you must allocate a separate management subnet.
VCF-ESX-RCMD-SEC-001	Deactivate SSH access on all ESXi hosts in the management domain by having the SSH service stopped and using the default SSH service policy Start and stop manually .	Ensures compliance with the vSphere Security Configuration Guide and with security best practices. Disabling SSH access reduces the risk of security attacks on the ESXi hosts through the SSH interface.	You must activate SSH access manually for troubleshooting or support activities as VMware Cloud Foundation deactivates SSH on ESXi hosts after workload domain deployment.
VCF-ESX-RCMD-SEC-002	Set the advanced setting UserVars.SuppressShellWarning to 0 across all ESXi hosts in the management domain.	Ensures compliance with the vSphere Security Configuration Guide and with security best practices Enables the warning message that appears in the vSphere Client every time SSH access is activated on an ESXi host.	You must turn off SSH enablement warning messages manually when performing troubleshooting or support activities.