This topic explains how to configure SSL for authentication in VMware Tanzu GemFire.

You can configure SSL for authentication between members and to protect your data during distribution. You can use SSL alone or in conjunction with the other Tanzu GemFire security options.

Tanzu GemFire SSL connections use the Java Secure Sockets Extension (JSSE) package, so the properties described here apply to Tanzu GemFire servers and to Java-based clients. SSL configuration in non-Java clients may differ. Refer to your client’s documentation for details.

SSL-Configurable Components

You can specify that SSL be used system-wide, or you can independently configure SSL for specific system components. The following list shows the system components that can be separately configured to communicate using SSL, and the kind of communications to which each component name refers:

cluster
Peer-to-peer communications among members of a cluster
gateway
Communication across WAN gateways from one site to another
web
All web-based services hosted on the configured server, which can include the Developer REST API service, the Management REST API service (used for remote cluster management) and the Pulse monitoring tool’s web-based user interface.
jmx
Java management extension communications, including communications with the gfsh utility. The Pulse monitoring tool uses JMX for server-side communication with a locator, but SSL applies to this connection only if Pulse is located on an app server separate from the locator. When Pulse and the locator are colocated, JMX communication between the two does not involve a TCP connection, so SSL does not apply.

Note: GemFire 10.1 deprecates Pulse in favor of VMware GemFire Management Console. Pulse will be removed in a future release.

locator
Communication with and between locators
server
Communication between clients and servers
all
All of the above (use SSL system-wide)

Specifying that a component is enabled for SSL applies to the component’s server-socket side and its client-socket side. For example, if you enable SSL for locators, then any process that communicates with a locator must also have SSL enabled. If you provide "" as the value, SSL is turned off for all components.

SSL Configuration Properties

You can use Tanzu GemFire configuration properties to activate or deactivate SSL, to identify SSL ciphers and protocols, and to provide the location and credentials for key and trust stores.

ssl-enabled-components
List of components for which to enable SSL. Component list can be "" (deactivate SSL), “all”, or a comma-separated list of components.
ssl-endpoint-identification-enabled
A boolean value that, when set to true, causes clients to validate the server’s hostname using the server’s certificate. The default value is false. Enabling endpoint identification guards against DNS man-in-the-middle attacks when trusting certificates that are not self-signed.
ssl-use-default-context
A boolean value that, when set to true, allows Tanzu GemFire to use the default SSL context as returned by SSLContext.getInstance(‘Default’) or set by using SSLContext.setDefault(). When enabled, also causes ssl-endpoint-identification-enabled to be set to true.
ssl-require-authentication
Requires two-way authentication, applies to all components except web. Boolean - if true (the default), two-way authentication is required.
ssl-web-require-authentication
Requires two-way authentication for web component. Boolean - if true, two-way authentication is required. Default is false (one-way authentication only).
ssl-default-alias
A server uses one key store to hold its SSL certificates. All components on that server can share a single certificate, designated by the ssl-default-alias property. If multiple SSL components are enabled and any one of them also specifies a component-specific alias, ssl-default-alias must be set if not all components specify an alias to use.
ssl-component-alias=string
You can configure a separate certificate for any component. All certificates reside in the same key store, but can be designated by separate aliases that incorporate the component name, using this syntax, where component is the name of a component. When a component-specific alias is specified, it overrides the ssl-default-alias for the component specified.

For example, ssl-locator-alias would specify a name for the locator component’s certificate in the system key store.

ssl-ciphers
A comma-separated list of the valid ciphers for TCP/IP connections with TLS encryption enabled. A setting of ‘any’ allows the JSSE provider to select an appropriate cipher that it supports.
ssl-protocols
A comma-separated list of the valid protocol versions for TCP/IP connections with TLS encryption enabled. A setting of ‘any’ attempts to use your JSSE provider’s TLSv1.3, or TLSv1.2 if v1.3 is not available.
ssl-keystore, ssl-keystore-password
The path to the key store and the key store password, specified as strings
ssl-truststore, ssl-truststore-password
The path to the trust store and the trust store password, specified as strings
ssl-keystore-type, ssl-truststore-type
The types of the key store and trust store, specified as strings. The default for both is “JKS”, indicating a Java key store or trust store.

Example: secure communications throughout

To implement secure SSL communications throughout an entire cluster, each process should enable SSL for all components.

ssl-enabled-components=all
ssl-endpoint-identification-enabled=true
ssl-keystore=secure/keystore.dat
ssl-keystore-password=changeit
ssl-truststore=secure/truststore.dat
ssl-truststore-password=changeit

If the key store has multiple certificates you may want to specify the alias of the one you wish to use for each process. For instance, ssl-default-alias=Hiroki.

Example: non-secure cluster communications, secure client/server

In this example, SSL is used to secure communications between the client and the server:

Server properties

Cluster SSL is not enabled.

ssl-enabled-components=server,locator
ssl-server-alias=server
ssl-keystore=secure/keystore.dat
ssl-keystore-password=changeit
ssl-truststore=secure/truststore.dat
ssl-truststore-password=changeit
ssl-default-alias=Server-Cert

Locator properties

Cluster SSL is not enabled.

ssl-enabled-components=locator
ssl-locator-alias=locator
ssl-keystore=secure/keystore.dat
ssl-keystore-password=changeit
ssl-truststore=secure/truststore.dat
ssl-truststore-password=changeit
ssl-default-alias=Locator-Cert

Client properties

On Java clients, the list of enabled components reflects the server’s configuration so the client knows how it is expected to communicate with (for example) servers and locators. Paths to keystore and truststore are local to the client.

In this example, the client’s trust store must trust both locator and server certificates. Since the client does not specify a certificate alias, SSL will use the default certificate in its key store.

ssl-enabled-components=server,locator
ssl-endpoint-identification-enabled=true
ssl-keystore=secret/keystore.dat
ssl-keystore-password=changeit
ssl-truststore=secret/truststore.dat
ssl-truststore-password=changeit

SSL Property Reference Tables

The following table lists the components you can configure to use SSL.

Table 1. SSL-Configurable Components

Component Communication Types
cluster Peer-to-peer communications among members of a cluster
gateway Communication across WAN gateways from one site to another
web Web-based communication, including REST interfaces
jmx Java management extension communications, including gfsh
locator Communication with and between locators
server Communication between clients and servers
all All of the above

The following table lists the properties you can use to configure SSL on your Tanzu GemFire system.

Table 2. SSL Configuration Properties

Property Description Value
ssl‑enabled‑components list of components for which to enable SSL “all”, "", or comma-separated list of components: cluster, gateway, web, jmx, locator, server
ssl‑endpoint‑identification‑enabled causes clients to validate server hostname using server certificate boolean - if true, does validation; defaults to false
ssl‑use‑default‑context allows Tanzu GemFire to use the default SSL context boolean - if true, uses the default SSL context. Also sets ssl-endpoint-identification-enabled to true; defaults to false
ssl-require-authentication requires two-way authentication, applies to all components except web boolean - if true (the default), two-way authentication is required
ssl‑web‑require‑authentication requires two-way authentication for web component boolean - if true, two-way authentication is required. Default is false (one-way authentication only)
ssl-default-alias default certificate name string - if empty, use first certificate in key store
ssl-component-alias component-specific certificate name string - applies to specified component
ssl-ciphers list of SSL ciphers comma-separated list (default “any”)
ssl-protocols list of SSL protocols comma-separated list (default “any”)
ssl-keystore path to key store string
ssl-keystore-password key store password string
ssl-keystore-type trust store type string
ssl-truststore path to trust store string
ssl-truststore-password trust store password string
ssl-truststore-type trust store type string

Procedure

  1. Make sure your Java installation includes the JSSE API and familiarize yourself with its use. For information, see the Oracle JSSE website.

  2. Configure SSL as needed for each connection type:

    1. Use locators for member discovery within the clusters and for client discovery of servers. See Configuring Peer-to-Peer Discovery and Configuring a Client/Server System.

    2. Configure SSL properties as necessary for different component types, using the properties described above. For example, to enable SSL for communication between clients and servers you would configure properties in the gemfire.properties file similar to:

      ssl-enabled-components=server
      ssl-protocols=any
      ssl-ciphers=SSL_RSA_WITH_NULL_MD5, SSL_RSA_WITH_NULL_SHA
      ssl-keystore=/path/to/trusted.keystore
      ssl-keystore-password=password
      ssl-truststore=/path/to/trusted.keystore
      ssl-truststore-password=password
      
check-circle-line exclamation-circle-line close-line
Scroll to top icon