This document contains release information for VMware Greenplum Text 3.12.0.

Platform Compatibility

VMware Greenplum Text is compatible with the following operating systems and versions of Greenplum Database 4, Greenplum Database 5, and Greenplum Database 6:

Greenplum Text Version Greenplum Version OS Version
3.0.0 - 3.5.x 4.3.18+ RHEL6
3.0.0 - 3.11.x 5.x RHEL61, RHEL7
3.3.1, 3.4.0, 3.4.1 6.0.0 - 6.4.0 RHEL6, RHEL7
3.4.2, 3.4.3, 3.4.4
3.5.x
3.6.x
3.7.x
3.8.x
3.9.x
3.10.x
3.11.x		 6.5.0 - 6.17.7 RHEL6, RHEL7
3.6.x
3.7.x
3.8.x
3.9.x
3.10.x
3.11.x		 6.18+ RHEL6, RHEL7
3.9.1
3.10.x
3.11.x		 6.18+ RHEL8
3.12.0 6.18+, 7.0+ RHEL8, RHEL9

1 For Greenplum Database version 5.x, the Greenplum Text RHEL6 installer is compatible with both RHEL6 and RHEL7.

VMware Greenplum Text 3.12.0

Release Date: April 05, 2024

Greenplum Text 3.12.0 is a minor release that includes feature changes and resolves several issues.

New and Changed Features

  • Greenplum Text is now supported for VMware Greenplum 7.x releases.

  • In order to run Greenplum Text with VMware Greenplum 7.x, users must set default Python 3 version to 3.9 or higher.

Resolved Issues

376224
Resolves an issue where the gptext-start -r' command would error out if the previous Greenplum Text nodes were not gracefully shut down.

VMware Greenplum Text 3.11.1

Release Date: November 17, 2023

Greenplum Text 3.11.1 is a maintenance release that includes feature changes and resolves several issues.

Changed Features

  • When you run gptext-start, by default Greenplum Text now waits a maximum of 5 minutes for indexes to turn green before deactivating the index read-only state. This is compared to a default of 30 minutes in the previous release. You can now specify the --health_check_timeout option at startup to override the default maximum wait time.

  • The output of the gptext-readonly state command now shows which utility (gptext-readonly, gptext-stop, gptext-start, or gptext-upgrade) was used to activate the read-only state of an index, as well as the time the change was made. You can also check this information by running the gptext.cluster_status() function.

  • Greenplum Text no longer reloads an index after a utility activates or deactivates the index readonly state. This change helps to avoid OOM errors caused by suddenly reloading indexes when the Solr node JVM memory usage is over 50%.

Resolved Issues

  • Resolved a bug that could generate errors when repeatedly running the gptext-stop command in a short period of time. Prior to this fix, after the first gptext-stop successfully shut down the cluster, a subsequent gptext-stop could fail to detect the cluster status in time, and would report an error.

  • Fixed an upgrade error that could occur if the greenplum-solr directory versions on the master host were out of date. This error could happen only in cases where the master host did not have Solr nodes deployed to it. GPText functionality was not affected (because there were no Solr instances running on the host) but an error was reported during the Greenplum Text upgrade process. This error no longer occurs when upgrading to Greenplum Text version 3.11.1 or later.

VMware Greenplum Text 3.11.0

Release Date: July 28, 2023

Greenplum Text 3.11.0 is a minor release that introduces new features and resolves several issues.

New Features

  • For indexing of documents stored within the database, Greenplum Text supports many more document types in addition to plain text, including PDF, Microsoft Word, XML, and images, among others. For a full list of supported document types, see Apache Tika Supported Document Formats.

  • You may now run Greenplum Text in read-only mode, using the new gptext-readonly utility; this supports the maintenance scenario in which you want to block updates to an index while still being able to search the index's contents.

  • VMware Greenplum Text now supports Java 11.

  • The gptext-start utility now starts up all indexes in read-only mode and then changes them to writeable after a successful cluster health check. The utility also takes a new option, -o | --skip_readonly, which starts up all indexes in writeable mode. This option only takes effect when the -r option is also enabled.

  • The gptext-stop utility now makes all indexes read-only before stopping the cluster. The utility also takes a new option, -o | --skip_readonly. When invoked, Greenplum Text stops all indexes while the indexes are still writeable.

  • The user-defined function (UDF) gptext.cluster_status() now has an additional column, read_only, to show whether the index is in read-only mode.

Changed Feature

  • Greenplum Text's downgrade feature is now supported only for Greenplum Text 3.9.0 and later.

  • The user-defined function (UDF) gptext.delete() now requires a field name argument.

Resolved Issues

[32768] Resolved an issue where a Greenplum Text index could not be recovered because leader roles were not being properly assigned to replicas.

[32787] Resolved an issue where Greenplum Text was hanging after running gptext start -r.

[32832] Resolved an issue where intermittent PANIC errors were occurring on the coordinator host when partition tables were accessed, due to mishandling of thread access.

Greenplum Text 3.10.0

Release Date: December 16th, 2022

VMware Greenplum Text 3.10.0 is a minor release that introduces a new feature.

New Features

  • VMware Greenplum Text 3.10.0 introduces a new field gptext_json, applicable to Greenplum Database column types json and jsonb. The new feature allows users to perform advanced text searches in json documents, with different json paths. For details refer to Working with Json documents.

Changes

  • Users can now specify the field type when adding a field using gptext.add_field.

VMware Greenplum Text 3.9.1

Release Date: January 28, 2022

VMware Greenplum Text 3.9.1 is a maintenance release that introduces a change and resolve issues.

Changed Features

  • VMware Greenplum Text 3.9.1 bundles version 2.17.1 of the log4j2 library to mitigate CVE-2021-44832.
  • VMware Greenplum Text 3.9.1 has been tested for compatibility with Red Hat Enterprise Linux 8.

Resolved Issues

  • (CVE‑2021‑44832) Updates the bundled log4j2 library to version 2.17.1.
  • (32047) Resolved a Greenplum crash that could occur when Greenplum Text and ZooKeeper were down.

VMware Greenplum Text 3.9.0

Release Date: January 13, 2022

VMware Greenplum Text 3.9.0 is a minor release that introduces new and changed features and resolves issues.

Features

VMware Greenplum Text 3.9.0 includes these new and changed features:

  • VMware Greenplum Text 3.9.0 bundles version 2.17.0 of the log4j2 library to mitigate CVE-2021-45105.

  • VMware Greenplum Text 3.9.0 includes changes to support future component upgrade by the VMware VMware Greenplum gpupgrade utility. These changes include:

    • New install location for the VMware Greenplum Text libraries. The libraries are now installed to <gptext-install-dir>/lib/gpdb/gpdb<N>/, where <N> identifies the (major) version number of the VMware VMware Greenplum installation (5 or 6).
    • New VMware Greenplum Text library file names. The names change from gptext-gpdb<N>-<gptext-version>.so to gptext-<gptext-version>.so.

    Note: Should you have the need to downgrade from VMware Greenplum Text version 3.9.0+, these changes require that you perform a new Two-Part VMware Greenplum Text Downgrade procedure.

Resolved Issues

  • (CVE‑2021‑45105) Updates the bundled log4j2 library to version 2.17.0.
  • (31650) Resolves an issue with rolling upgrade by optimizing the procedure to avoid index start failure due to leader replica racing.
  • (180371973) The installer logic provides improved detection of the operating system and Greenplum Database version numbers for compatibility verification.
  • (180260381) Resolves an issue where the gptext.highlight_instant_content() function did not honor the hl_pre_tag and hl_post_tag markup string settings.

VMware Greenplum Text 3.8.1

Release Date: December 17, 2021

VMware Greenplum Text 3.8.1 is a maintenance release that introduces a change and resolve issues.

Changed Feature

VMware Greenplum Text 3.8.1 bundles version 2.16.0 of the log4j2 library to mitigate CVE-2021-44228 and CVE-2021-45046.

Resolved Issues

VMware Greenplum Text 3.8.0

Release Date: November 17, 2021

VMware Greenplum Text 3.8.0 is a minor release that introduces new and changed features and resolves issues.

New Features

  • VMware Greenplum Text can use a temporary directory that you specify when it extracts or processes intermediate files during install, deploy, upgrade, downgrade, expand, and recover operations. You can set the -t <temp-dir> option on these commands when disk space or permissions issues prevent the use of /tmp for this purpose.

  • VMware Greenplum Text now supports highlighting keywords in the results of range and wildcard searches.

  • VMware Greenplum Text no longer requires gptext.enable_terms() to highlight a field. Greenplum Text can now highlight fields that meet any of the following configuration conditions:

    • The field is stored (stored=true).
    • The field is configured with postings for term vectors (storeOffsetsWithPositions=true and termVectors=true).
    • The field is configured with full term vectors (termVectors=true, termPositions=true, and termOffsets=true). This configuration is equivalent to invoking gptext.enable_terms() on the field.

  • VMware Greenplum Text introduces a new disk-efficient highlighting function, gptext.highlight_instant_content(). You can use this function to create an index without highlighting, and only highlight search results.

  • VMware Greenplum Text can now index documents that reside on S3-compatible storage such as MinIO.

Changed Feature

  • Full term vectors are no longer mandatory for highlighting.

Resolved Issues

  • (31772) Resolves an issue where VMware Greenplum Text returned the error value "nnn" is out of range for type integer when it tried to create an index when the oid of the source table was larger than int4.

VMware Greenplum Text 3.7.0

Release Date: June 22, 2021

VMware Greenplum Text 3.7.0 is a minor release that introduces new features, changes features, and resolves issues.

New Features

  • VMware Greenplum Text 3.7.0 introduces the ability to downgrade the VMware Greenplum Text version via the installer. For details, see Downgrading to Version 3.6.0. In addition, it introduces a new utility -- gptext-downgrade -- to be used to continue the downgrade process after errors are resolved. For details, see the gptext-downgrade reference page.

  • The gptext-state utility can now display the status of all Solr nodes, with the new nodes parameter. For details, see the gptext-state reference page.

  • The gptext-state utility now returns two new statistics:

    • docs_capacity -- reports how close a user is to reaching the maximum number of stored documents in an index

    • max_supported_docs -- reports the maximum number of documents a user can store in an index

For details, see the gptext-state reference page.

Changed Feature

The gptext-upgrade utility no longer includes the -f | --file parameter because VMware Greenplum Text does not rely on the user to provide the upgrade file location.

Resolved Issues

  • (176715390) Resolved an issue where the gptext-auth change-password command was prompting for password information that had already been provided.

  • (174164033) Resolved an issue where VMware Greenplum Text replica recovery could result in data loss.

  • (31047) Resolved an issue where gptext-recover -f |--force could not recover a Solr node when GPTEXT_CUSTOM_CONFIG_DIR is defined while installing.

GPText 3.6.0

GPText 3.6.0 is a minor release.

New Features

  • GPText 3.6.0 introduces user password authentication for the SolrCloud User Interface (UI). Users can now enable password authentication during a new installation, or use the new gptext-auth utility to enable authentication for an existing cluster. For details, see Enabling User Authentication.

  • The gptext-rebalance utility now includes the leader option that rebalances the leaders across the shards of an index. For details, see Rebalancing Replicas and Replica Leaders.

  • During the GPText installation process users can now set the SolrCloud nodes' timezone. The timezone setting is reflected in the Solr log timestamps. For details, see Set Installation Parameters in the installation guide.

  • GPText 3.6.0 enables you to start or stop one single node or a group of SolrCloud cluster nodes. For details, see Starting or Stopping SolrCloud Nodes.

  • This release includes enhancements that enable future releases to downgrade to GPText version 3.6.0.

Changed Feature

  • This release increases the default value of formdataUploadLimitInKB to 10240000 KB, to avoid hitting limits when transferring records between nodes.

Resolved Issues

  • (31087) Fixed an issue where, during a segment host failure, the replica leader on the mirror host did not successfully continue supporting the active requests, despite showing as "active".

GPText 3.5.0

GPText 3.5.0 is a minor release.

New Features

  • This release introduces the gptext-shard utility which enables users to increase or delete a group of shards in an index. The number of shards in the group depends on the number of segments in the cluster. You can apply multiple shard increases, up to a recommended limit of 500 total shards per cluster. For more information see Altering shard number per index.

  • Improves the efficiency of fetching field values, and significantly reduces the response time of Solr.

  • In configurations with compositeID router, the GPText query option distrib.singlePass now defaults to true. This option reduces data transfer times when querying large data amounts across the Solr nodes.

Resolved Issues

  • Removes the ODP file from the GPText release package provided with the latest distribution of Greenplum Database at Broadcom Support Portal.

GPText 3.4.5

GPText 3.4.5 is a maintenance release. It contains the following fixes and changes:

  • Fixed an issue where the GPText installer trimmed the domain name part of a hostname; for example mdw.prod.vmware.com would be trimmed to mdw. This caused the GPText installation to fail in environments where the DNS server expected hostnames with the Fully Qualified Domain Name (FQDN).

GPText 3.4.4

GPText 3.4.4 is a maintenance release. It contains the following fixes and changes:

  • Performance problems were observed after the Solr default router changed to compositeId in GPText 3.1.0. To address this problem, GPText 3.4.4 restores the Solr default router to implicit. To use the compositeId router, you must specify a non-zero value for gptext.idx_num_shards.
  • [30826] Fixed a type mapping issue that caused GPText to use the same convert function for the Greenplum column types timestamp without timezone and timestamp with timezone.

GPText 3.4.3

GPText 3.4.3 is a maintenance release. It contains the following fixes:

  • The gptext-rebalance node command, a Beta feature, is now deprecated. Use the gptext-rebalance index command for similar results.

  • GPText now by default keeps up to 100 Solr logs on each Solr node.

  • Fixed an issue with upgrading GPText.

GPText 3.4.2

GPText 3.4.2 is a maintenance release. It contains the following fixes.

  • Support for Greenplum Database 6.5.0 and later. GPText 3.4.2 is not compatible with Greenplum Database versions earlier than 6.5.0 due to an ABI compatibility issue.

  • Fixes that allow GPText to support symbolic links.

GPText 3.4.1

GPText 3.4.1 is a maintenance release. It contains fixes for these issues.

  • gptext-migrator failed to install the GPText shared library after upgrading Greenplum Database.

  • The gptext-state utility could take a long time to return results if a replica was in recovery mode. This issue is resolved.

  • Solr now uses log4j 2.11. The log4j configuration file name is now log4j2.xml instead of log4j.properties.

  • The GPText installer will display an error message and exit if the operating system version and Greenplum Database version are not compatible with the installer version.

  • Setting the value of the GPTXTHOME environment variable to a symlink to the GPText installation directory, caused GPText to fail in some cases. Upgrading GPText failed because the GPTXTHOME environment variable was inconsistent with the value in the gptxtenvs.conf file. This issue has been fixed. GPText now supports creating a symbolic link to the installation directory.

GPText 3.4.0

New Features

  • Upgraded Apache Solr to version 7.4.0.

  • (Beta) The new gptext-rebalance node command rebalances the GPText cluster by relocating replicas to new nodes. Use this command after you add hosts or nodes to the cluster with gptext-expand. See gptext-rebalance in the Utility Reference for help using this utility. Note: gptext-rebalance node may fail because of a Solr bug. See Known Issues. You can use the gptext-rebalance index command to work around this issue.

  • The gptext-expand command has a new -b (--binary-only) option that is used to copy only the GPText installation directories to the new hosts without starting Solr nodes on the new hosts. Using this option allows you to verify GPText operation with the expanded cluster. The -b option can only be used with the -H option and the new hosts must be Greenplum Database hosts.

  • The gptext-start and gptext-stop utilities now check for zombie Solr processes and report them if found. The gptext-stop utility verifies that all Solr processes are closed.

  • Improved ZooKeeper stability.

    • ZooKeeper and Solr configurations have been modified to increase timeouts to better tolerate small fluctuations in ZooKeeper response.
    • ZooKeeper JVM memory is configured to a small heap size to reduce the frequency of long GC pauses.
    • Added a ZooKeeper GC log to track ZooKeeper garbage collections.
    • When a ZooKeeper timeout occurs, GPText retries the query ten times in the following five mintues before the query fails.
    • Added ZooKeeper Best Practices with steps users can take to optimize ZooKeeper performance.

Resolved Issues

When indexing external documents in a directory using gptext.index_external_dir(), if one document failed to be added to the index, other documents in the same directory could fail. This is fixed. GPText now sends a request to Solr to get the files to be indexed and then indexes them individually with the gptext.index_external() function.

A GPText query could time out when ZooKeeper was under heavy load, leaving the ZooKeeper connection handle in an invalid state in the Greenplum Database session. The query would fail with an error message invalid zhandle state, and it was necessary to start a new session to continue using GPText. Now, after a ZooKeeper timeout, GPText retries the query ten times in the following five minutes before the query fails. The retry attempts are not visible to users, but they are logged. See also "Improved ZooKeeper stability" in the New Features and Enhancements section.

With a very large index, the number of documents could exceed the maximum value of the integer data type, causing the gptext.index_size() function to return an "integer out of range" error. This has been fixed. The function now returns a bigint type.

GPText 3.3.1

Using GPText 3.3 with Greenplum Database 6.0

GPText 3.3.1 can be installed on a Greenplum Database 6 system with Java 8.

A GPText binary distribution has been added to Broadcom Support Portal for Red Hat 7/CentOS 7 with Greenplum Database 6.

Note: The "Greenplum Text 3.3.1 for RHEL 7" distribution is for Greenplum Database 6.x only. Download the RHEL 6 distribution if you are installing GPText into a Greenplum Database 5.x system.

Following are differences using GPText with Greenplum Database 6 than with earlier Greenplum Database releases:

  • The custom_variable_classes server configuration parameter has been removed in Greenplum Database 6. With earlier Greenplum Database versions, it was necessary to add 'gptext' to this parameter in order to set GPText configuration parameters. Greenplum Database 6 allows you to set configuration parameters in a database session without declaring a variable class.

  • In Greenplum Database 4 and 5, the default output format for the binary data type bytea is the PostgreSQL escape format, a sequence of ASCII characters with escape sequences where bytes cannot be represented with ASCII. In Greenplum Database 6, the default output format is the hex format, which represents each byte with hexadecimal digits. In Greenplum Database 5, the hex output format can be specified by setting the bytea_output configuration parameter to hex. To produce the same output in Greenplum Database 4, 5, and 6, you can set the bytea_output configuration parameter to escape.

Custom Configuration Directory

A new optional installation parameter, GPTEXT_CUSTOM_CONFIG_DIR, can be set in the gptext_install_config file to specify a directory to store custom configuration files.

By default, GPText saves custom configuration files under the $GPTEXTHOME/share/ directory on each Solr host, for example $GPTEXTHOME/share/external_.

To specify a different directory to store external configuration files, before you run the GPText installer, uncomment the GPTEXT_CUSTOM_CONFIG_DIR parameter in the gptext_install_config file and specify the full path to the directory. For example:

GPTEXT_CUSTOM_CONFIG_DIR="/home/gpadmin/config_dir"

The gpadmin user must have the OS permissions required to create the directory.

If the parameter is set, the GPText installer will create the custom configuration directory on every Solr host. Configuration files you upload using the gptext-external upload command will be stored under this directory on every Solr host to allow Solr to access the external document source from every host. For example if the GPTEXT_CUSTOM_CONFIG_DIR parameter is set to /home/gpadmin/config_dir when you install GPText, an s3 configuration with the name s3_conf will be saved in the directory /home/gpadmin/config_dir/external_source/s3/s3_conf on each host.

GPText 3.2.0

New Features

Lemmatization

GPText 3.2.0 enables lemmatizing terms in GPText indexes. You can define Solr analysis chains that include the Apache OpenNLP parts-of-speech filter and the new GPText WordNetLemmatizer filter, which replaces terms with the root form of the term. The WordNetLemmatizer filter uses a lexical database from the Princeton University WordNet® project to determine the root form.

GPText Configuration Files Location

GPText now saves configuration files gptext.conf, gptxtenvs.conf, and zookeeper.conf only in the Greenplum Database master and standby master directories. The gptext.conf file is no longer saved in each segment data directory.

Flexible Sharding

By default, GPText creates one Solr index shard for each Greenplum Database primary segment. You can now specify a smaller number of shards by setting the gptext.idx_num_shards parameter to the number of shards you want before you create the index. This works for both regular GPText indexes and external indexes.

In GPtext 3.2.0, when gptext.idx_num_shards is set to the default (0), GPText configures the index to use the Solr implicit router, with one shard per Greenplum Database segment. When the gptext.idx_num_shards parameter is changed to the number of shards desired, GPText creates the index using the Solr compositeId router to route documents to shards. The compositeId router does not support duplicate IDs, so if you set the if_check_id_uniqueness argument to false when you call the gptext.create_index() function the implicit router is used, and the index will have one shard per Greenplum Database segment. Note: The Solr default router is restored to implicit in GPText versions 3.4.4 and higher to address performance issues.

The content_id column is removed from the output of the gptext.index_status() and gptext.index_summary() functions, since Greenplum Database segments are not always associated with a single index shard.

See Specifying the Number of Shards for more information about this feature.

gptext-recover Utility

When using the -f (--force) option, the gptext-recover utility now verifies that there are no indexes in a red state before proceeding. If any index is down, the utility exits.

ZooKeeper Upgrade

Apache ZooKeeper included with GPText 3.2.0 has been upgraded to version 3.4.11. This ZooKeeper release includes bug fixes that resolve an inconsistent cluster issue with GPText(MPP-29742).

GPText 3.1.0

New Features

Improvements to aid in developing and testing analyzer chains

  • The new gptext.list_field_types() function lists the field types defined in the managed-schema configuration file for an index.

  • The new gptext.get_field_type() function displays the index and query analyzer chains for a field type in JSON format.

  • The new gptext.analyzer() function shows the index or query analyzer chain output for a given field type and input text. This function is useful for testing and debugging analyzer chains interactively without modifying the index.

Part-of-speech tagging and named entity recognition

  • GPText includes OpenNLP libraries and analyzer classes to classify indexed terms' parts-of-speech (POS), and to recognize named entities, such as the names of persons, locations, and organizations (NER). GPText saves NER terms in the field's terms vector, prepended with a code to identify the type of entity recognized. This allows searching documents by entity type.

  • The new gptext.ner_terms() function lists NER-tagged terms for documents that match a query.

  • GPText includes the OpenNLP models for the English language. You can download models for other languages from the OpenNLP web site and use them with GPText.

Other enhancements and fixes

  • The first argument of the gptext.terms() function, an anytable data type, has been made optional.

  • Fixed an error where the gptext.partition_status() function displayed partition information for an index after it was dropped.

Apache Solr updated to Solr version 7.3

GPText 3.1.0 includes Apache Solr 7.3. See the following release documents for information about the Solr 7.3 release.

Following are GPText changes and Solr usage notes related to the Solr 7.3 upgrade.

  • GPText server-side components are rebuilt and tested with the new Solr JAR files.

  • The managed-schema, solrconfig.xml and other collection configuration files are updated.

  • The top-level <highlighting> element in solrconfig.xml is now officially deprecated in favor of the equivalent <searchComponent> syntax. This element has been out of use in default Solr installations for several releases already.

  • The legacyCloud parameter now defaults to false. If an entry for a replica does not exist in state.json, that replica will not be registered. This may affect users who bring up replicas and they are automatically registered as a part of a shard. It is possible to revert to the old behavior by setting the property legacyCloud=true in the cluster properties by running the following command in the GPText installation directory:

     $ ./server/scripts/cloud-scripts/zkcli.sh -zkhost 127.0.0.1:2181 -cmd clusterprop -name legacyCloud -val true

  • With earlier Solr releases, if you drop an index while a Solr node with a replica of the index is down, when the down node comes back on-line, the index comes back and cannot be deleted. Solr 7 fixes this bug. The GPText workaround for this bug is removed.

  • PointFields are default numeric types. Solr has implemented *PointField types across the board, to replace Trie* based numeric fields. All Trie* fields are now considered deprecated, and will be removed in Solr 8. If you are using Trie* fields in your schema, you should consider moving to PointFields as soon as feasible. Changing to the new PointField types will require you to re-index your data.

  • The following spatial-related fields have been deprecated:   LatLonType GeoHashField FieldType SpatialTermQueryPrefixTreeFieldType   Use one of these field types instead:   LatLonPointSpatialField SpatialRecursivePrefixTreeField RptWithGeometrySpatialField

  • To improve parameter consistency in the Collections API, the parameter names fromNode for the MOVEREPLICA command and source, and target for the REPLACENODE command have been deprecated and replaced with sourceNode and targetNode instead. The old names will continue to work for backwards compatibility, but they will be removed in Solr 8.

  • The replica core name has changed from <collection_name>_shard#_replica# to <collection_name>_shard#_replica_<node_type>#. For example, demo.wikipedia.articles_shard0_replica1 becomes demo.wikipedia.articles_shard0_replica_n1.

GPText 3.0.0

  • GPText 3.0.0 allows adding documents stored in Amazon Web Services S3 buckets to a GPText external index. This enhancement includes changes to enable uploading AWS credentials to ZooKeeper and support for the s3 document source type for the gptext.external_login(), gptext.external_logout(), gptext.index_external(), and gptext.index_external_dir() GPText functions.

  • The gptext-state utility with the --index (-i) option now includes the date and time the GPText index was last modified.

Known Issues

See the Apache Jira for known issues in Apache Solr.

Following are known issues in GPText. Workarounds are provided when available.

Upgrade Error Caused by greenplum-solr Directory

(Resolved in version 3.11.1.) An error can occur during upgrade to Greenplum Text versions 3.11.0 and earlier if the greenplum-solr directory versions on the master host are out of date. This can occur only in cases where the master host does not have Solr nodes deployed to it. Greenplum Text functionality is not affected (because there are no Solr instances running on the host) but an error is reported during upgrade.

Workaround: To avoid upgrade errors, check if the greenplum-solr directories are the same on the master hosts before starting the Greenplum Text upgrade. Run these commands on the master host and compare if the version outputs match:

$GPTXTHOME/../greenplum-solr/bin/solr -version  
$GPTXTHOME/greenplum-solr/bin/solr -version

If the versions do not match, delete the greenplum-solr directory on the master host and replace it with the one under the Greenplum Text home directory:

rm -r $GPTXTHOME/../greenplum-solr 
cp -r $GPTXTHOME/greenplum-solr $GPTXTHOME/../greenplum-solr
Note

This error no longer occurs when upgrading to Greenplum Text version 3.11.1 or later, and the workaround is not necessary.

Downgrading from VMware Greenplum Text Versions 3.9.0+ Requires Two-Part Downgrade Procedure

Because VMware Greenplum Text version 3.9.0 changed the install location and file names of the Greenplum Text libraries, you must perform a Two-Part VMware Greenplum Text Downgrade procedure when you downgrade Greenplum Text from version 3.9.0 or newer.

Solr Log4j Log is Missing in GPText 3.4.0

[171486503] Solr 7.4 uses Log4j version 2.11. In Log4j 2.11 the configuration file name changed from log4j.properties to log4j.xml, but the file name was not changed in GPText 3.4.0. Due to this issue, no new lines are added to solr.log.

This issue is fixed in GPText 3.4.1.

Workaround:

Upgrading to GPText 3.4.1 fixes the issue. If you are unable to upgrade to 3.4.1, you can follow these steps to manually fix the issue in your GPText 3.4.0 system:

  1. Download the new log4j2.xml configuration file from https://raw.githubusercontent.com/apache/lucene-solr/master/solr/server/resources/log4j2.xml.

  2. Copy the log4j2.xml file to every solr data directory, for example /data/gptext/solr0/.

  3. Update the startup parameters file solr.in.sh in every solr data directory.

    Change this line:

    LOG4J_PROPS=/data/gptext/solr0/log4j.properties

    to:

    LOG4J_PROPS=/data/gptext/solr0/log4j2.xml

  4. Restart GPText.

    $ gptext-start -r

    You will find the following files in the Solr log directory, for example /data/gptext/solr0/logs:

    • solr-18983-console.log
    • solr_gc.log.0.current
    • solr.log
    • solr_slow_requests.log

  5. Verify that messages are now written to the solr.log file by running a GPText operation such as gptext-state.

gptext-migrator Fails to Install the GPText Shared Libary After Greenplum Database Upgrade

(Fixed in GPText 3.4.1) When you upgrade Greenplum Database and then migrate your existing GPText installation to the new Greenplum Database installation, the gptext-migrator utility in some cases fails to install the GPText UDF library to the new Greenplum Database $GPHOME/lib/postgresql directory. gptext-migrator outputs the message

[INFO]:-UDF libraries are installed in $GPTXTHOME/lib, don't need to migrate.

The message is correct only if you installed GPText binaries to a shared drive following the Optional Two-Part GPText Installation installation method.

Workaround:

  1. Create a host file containing a list of all Greenplum Database hosts.

  2. Make sure the gpadmin user has write permission in the $GPHOME/lib/postgresql directory of the new Greenplum Database installation directory on every Greenplum Database host.

  3. Use the gpscp utility to copy the GPText UDF library from the old Greenplum Database installation to the new Greenplum Database installation.

    $ gpscp -f hostfile /usr/local/greenplum-db-<old-version>/lib/postgresql/gptext*.so \
   =:/usr/local/greenplum-db-<new-version>/lib/postgresql/

See Upgrading GPText for more inforaation.

The gptext-rebalance node Command May Fail

The gptext-rebalance node command (beta) may fail with a message ERROR: Utilize Node failed due to a Solr bug. (See SOLR 13240.) You can use the gptext-rebalance index command to work around the issue. NOTE: The gptext-rebalance node command is deprecated.

Wildcards in GPText Search Options

Solr does not return all fields when the fl Solr search option contains a wildcard that matches field names. For example, given a table with columns contenta and contentb, specifying fl=contenta,contentb,(sum,1,1) correctly returns three fields. Specifying fl=cont*,sum(1,1) correctly returns contenta and contentb, but omits the pseudo-field sum(1,1).

Specifying a wildcard to match all fields (fl=*,sum(1,1)) also omits the pseudo-field.

Index Load Failure After Configuration File Error

If Solr fails to load an index because of a configuration file error, and then the index is dropped without first correcting the configuration file error, the index cannot be recreated until GPText is restarted. This can happen if you edit managed-schema or solrconfig.xml and introduce an XML syntax error or a typo in configuration values.

Workaround:

  1. When an index fails to load, check the Solr log to find the cause.
  2. If the cause is a configuration file error, such as invalid XML, use the gptext-config utility to edit the file and fix the error. Dropping the index without first correcting the error is not recommended.
  3. If you have dropped an index that failed to load without first correcting the cause of the failure, you must restart GPText before you can recreate the index. Run gptext-start -r to restart GPText.

Startup Failure with Large Numbers of Indexes

When there is a large number of Solr cores, Solr Cloud can fail to restart successfully, with error messages indicating failure to elect leaders for shards. This is a known Solr issue; see https://issues.apache.org/jira/browse/SOLR-5990 in the Apache Solr Jira for an example. Because of this issue, it is recommended to avoid designing GPText applications that create large numbers of indexes, shards, and replicas. The number of cores you can create before you observe this behavior is hardware dependent, so you should test to determine your system's limits. You can create and successfully operate a larger numbers of indexes than can be restarted successfully later, so be sure to test restarting GPText to determine a practical limit.

Setting GPText Configuration Parameters Without First Setting custom_variable_classes

In Greenplum Database versions before Greenplum Database 6, if the custom_variable_classes Greenplum Database server configuration parameter does not include the value "gptext", attempting to set a GPText configuration parameter returns an error message, for example:

mydb-# set gptext.replication_factor = 4;
WARNING:  Please logon again to make GUC setting take effect. (GucValue.h:301)
WARNING:  Please logon again to make GUC setting take effect. (GucValue.h:301)
ERROR: unrecognized configuration parameter "gptext.replication_factor"

In GPText 2.0, in addition to the error message, the value of the configuration parameter persisted in ZooKeeper is zero, replacing the previous value of the parameter.

mydb-# show gptext.replication_factor;
 gptext.replication_factor
----------------------------
 0

Beginning with GPText 2.1, the error message is still generated, however the value saved in ZooKeeper is the value specified in the set command, 4 in the preceding example.

To prevent the error message, before setting any GPText configuration parameters, use the gpconfig command-line utility to set the custom_variable_classes configuration parameter:

$ gpconfig -c custom_variable_classes -v 'gptext'

In Greenplum Database 6.0, the custom_variable_classes configuration parameter is removed and custom parameters can be set without errors.

check-circle-line exclamation-circle-line close-line
Scroll to top icon