gpinitsystem

Initializes a Greenplum Database system using configuration parameters specified in the gpinitsystem_config file.

Synopsis

gpinitsystem -c <cluster_configuration_file> 
            [-h <hostfile_gpinitsystem>]
            [-B <parallel_processes>] 
            [-p <postgresql_conf_param_file>]
            [-s <standby_master_host> [-P <standby_master_port>]
              [-F <standby_master_filespaces>]]
            [-m <number> | --max_connections=<number>]
            [-b <size> | --shared_buffers=<size>]
            [-n <locale> | --locale=<locale>] [--lc-collate=<locale>] 
            [--lc-ctype=<locale>] [--lc-messages=<locale>] 
            [--lc-monetary=<locale>] [--lc-numeric=<locale>] 
            [--lc-time=<locale>] [-e <password> | --su_password=<password>] 
            [-S] [-a] [-q] [-l <logfile_directory>] [-D]
            [-I <input_configuration_file>]
            [-O <output_configuration_file>]

gpinitsystem -v

Description

The gpinitsystem utility creates a Greenplum Database instance or writes an input configuration file using the values defined in a cluster configuration file and any command-line options that you provide. See Initialization Configuration File Format for more information about the configuration file. Before running this utility, make sure that you have installed the Greenplum Database software on all the hosts in the array.

With the -O output\_configuration\_file option, gpinitsystem does not create a new database instance but instead writes all provided configuration information to the specified output file. This file uses the QD_PRIMARY_ARRAY and PRIMARY_ARRAY parameters to define each member using its hostname, port, data directory, segment prefix, segment ID, and content ID. Details of the array configuration can be modified as necessary to match values available in a Greenplum Database backup, or can simply be used to recreate the same cluster configuration at a later time. Configuration files that use QD_PRIMARY_ARRAY and PRIMARY_ARRAY must be passed into gpinitsystem using the -I input\_configuration\_file option. See Initialization Configuration File Format for more information.

In a Greenplum Database DBMS, each database instance (the master and all segments) must be initialized across all of the hosts in the system in such a way that they can all work together as a unified DBMS. The gpinitsystem utility takes care of initializing the Greenplum master and each segment instance, and configuring the system as a whole.

Before running gpinitsystem, you must set the $GPHOME environment variable to point to the location of your Greenplum Database installation on the master host and exchange SSH keys between all host addresses in the array using gpssh-exkeys.

This utility performs the following tasks:

  • Verifies that the parameters in the configuration file are correct.
  • Ensures that a connection can be established to each host address. If a host address cannot be reached, the utility will exit.
  • Verifies the locale settings.
  • Displays the configuration that will be used and prompts the user for confirmation.
  • Initializes the master instance.
  • Initializes the standby master instance (if specified).
  • Initializes the primary segment instances.
  • Initializes the mirror segment instances (if mirroring is configured).
  • Configures the Greenplum Database system and checks for errors.
  • Starts the Greenplum Database system.

Note: This utility uses secure shell (SSH) connections between systems to perform its tasks. In large Greenplum Database deployments, cloud deployments, or deployments with a large number of segments per host, this utility may exceed the host's maximum threshold for unauthenticated connections. Consider updating the SSH MaxStartups and MaxSessions configuration parameters to increase this threshold. For more information about SSH configuration options, refer to the SSH documentation for your Linux distribution.

Options

-a
Do not prompt the user for confirmation.
-B parallel_processes
The number of segments to create in parallel. If not specified, the utility will start up to 4 parallel processes at a time.
-c cluster_configuration_file
Required. The full path and filename of the configuration file, which contains all of the defined parameters to configure and initialize a new Greenplum Database system. See Initialization Configuration File Format for a description of this file. You must provide either the -c cluster\_configuration\_file option or the -I input\_configuration\_file option to gpinitsystem.
-D
Sets log output level to debug.
-h hostfile_gpinitsystem
Optional. The full path and filename of a file that contains the host addresses of your segment hosts. If not specified on the command line, you can specify the host file using the MACHINE_LIST_FILE parameter in the gpinitsystem\_config file.
-I input_configuration_file
The full path and filename of an input configuration file, which defines the Greenplum Database members and segments using the QD_PRIMARY_ARRAY and PRIMARY_ARRAY parameters. The input configuration file is typically created by using gpinitsystem with the -O output\_configuration\_file option. You must provide either the -c cluster\_configuration\_file option or the -I input\_configuration\_file option to gpinitsystem.
--locale=locale | -n locale
Sets the default locale used by Greenplum Database. If not specified, the LC_ALL, LC_COLLATE, or LANG environment variable of the master host determines the locale. If these are not set, the default locale is C ( POSIX). A locale identifier consists of a language identifier and a region identifier, and optionally a character set encoding. For example, sv_SE is Swedish as spoken in Sweden, en_US is U.S. English, and fr_CA is French Canadian. If more than one character set can be useful for a locale, then the specifications look like this: en_US.UTF-8 (locale specification and character set encoding). On most systems, the command locale will show the locale environment settings and locale -a will show a list of all available locales.
--lc-collate=locale
Similar to --locale, but sets the locale used for collation (sorting data). The sort order cannot be changed after Greenplum Database is initialized, so it is important to choose a collation locale that is compatible with the character set encodings that you plan to use for your data. There is a special collation name of C or POSIX (byte-order sorting as opposed to dictionary-order sorting). The C collation can be used with any character encoding.
--lc-ctype=locale
Similar to --locale, but sets the locale used for character classification (what character sequences are valid and how they are interpreted). This cannot be changed after Greenplum Database is initialized, so it is important to choose a character classification locale that is compatible with the data you plan to store in Greenplum Database.
--lc-messages=locale
Similar to --locale, but sets the locale used for messages output by Greenplum Database. The current version of Greenplum Database does not support multiple locales for output messages (all messages are in English), so changing this setting will not have any effect.
--lc-monetary=locale
Similar to --locale, but sets the locale used for formatting currency amounts.
--lc-numeric=locale
Similar to --locale, but sets the locale used for formatting numbers.
--lc-time=locale
Similar to --locale, but sets the locale used for formatting dates and times.
-l logfile_directory
The directory to write the log file. Defaults to ~/gpAdminLogs.
--max_connections=number | -m number
Sets the maximum number of client connections allowed to the master. The default is 250.
-O output_configuration_file
When used with the -O option, gpinitsystem does not create a new Greenplum Database cluster but instead writes the supplied cluster configuration information to the specified output\_configuration\_file. This file defines Greenplum Database members and segments using the QD_PRIMARY_ARRAY, PRIMARY_ARRAY, and MIRROR_ARRAY parameters, and can be later used with -I input\_configuration\_file to initialize a new cluster.
-p postgresql_conf_param_file
Optional. The name of a file that contains postgresql.conf parameter settings that you want to set for Greenplum Database. These settings will be used when the individual master and segment instances are initialized. You can also set parameters after initialization using the gpconfig utility.
-q
Run in quiet mode. Command output is not displayed on the screen, but is still written to the log file.
--shared_buffers=size | -b size
Sets the amount of memory a Greenplum server instance uses for shared memory buffers. You can specify sizing in kilobytes (kB), megabytes (MB) or gigabytes (GB). The default is 125MB.
-s standby_master_host
Optional. If you wish to configure a backup master host, specify the host name using this option. The Greenplum Database software must already be installed and configured on this host.
-P standby_master_port
Optional. If you configure a standby master host, specify its port number using this option. The Greenplum Database software must already be installed and configured on this host.
-F standby_master_filespaces

Optional. If you configure a standby master host, specify a list of filespace names and the associated locations using this option. Each filespace name and its location is separated by a colon. If there is more than one file space name, each pair (name and location) is separated by a comma. For example:

filespace1_name:fs1_location,filespace2_name:fs2_location
: If this option is not specified, gpinitstandby prompts the user for the filespace names and locations.
If the list is not formatted correctly or number of filespaces do not match the number of filespaces already created in the system, gpinitstandby returns an error.
--su_password=superuser_password | -e superuser_password

Use this option to specify the password to set for the Greenplum Database superuser account (such as gpadmin). If this option is not specified, the default password gparray is assigned to the superuser account. You can use the ALTER ROLE command to change the password at a later time.

Recommended security best practices:

  • Do not use the default password option for production environments.
  • Change the password immediately after installation.
-S
If mirroring parameters are specified, spreads the mirror segments across the available hosts. The default is to group the set of mirror segments together on an alternate host from their primary segment set. Mirror spreading places each mirror on a different host within the Greenplum Database array. Spreading is only allowed if the number of hosts is greater than the number of segment instances.
-v
Displays the version of this utility.
-h
Displays the online help.

Initialization Configuration File Format

gpinitsystem requires a cluster configuration file with the following parameters defined. An example initialization configuration file can be found in $GPHOME/docs/cli_help/gpconfigs/gpinitsystem_config.

To avoid port conflicts between Greenplum Database and other applications, the Greenplum Database port numbers should not be in the range specified by the operating system parameter net.ipv4.ip_local_port_range. For example, if net.ipv4.ip_local_port_range = 10000 65535, you could set Greenplum Database base port numbers to these values.

PORT_BASE = 6000
MIRROR_PORT_BASE = 7000
REPLICATION_PORT_BASE = 8000
MIRROR_REPLICATION_PORT_BASE = 9000
ARRAY_NAME
Required. A name for the array you are configuring. You can use any name you like. Enclose the name in quotes if the name contains spaces.
MACHINE_LIST_FILE
Optional. Can be used in place of the -h option. This specifies the file that contains the list of segment host address names that comprise the Greenplum Database system. The master host is assumed to be the host from which you are running the utility and should not be included in this file. If your segment hosts have multiple network interfaces, then this file would include all addresses for the host. Give the absolute path to the file.
SEG_PREFIX
Required. This specifies a prefix that will be used to name the data directories on the master and segment instances. The naming convention for data directories in a Greenplum Database system is SEG_PREFIXnumber where number starts with 0 for segment instances (the master is always -1). So for example, if you choose the prefix gpseg, your master instance data directory would be named gpseg-1, and the segment instances would be named gpseg0, gpseg1, gpseg2, gpseg3, and so on.
PORT_BASE
Required. This specifies the base number by which primary segment port numbers are calculated. The first primary segment port on a host is set as PORT_BASE, and then incremented by one for each additional primary segment on that host. Valid values range from 1 through 65535.
DATA_DIRECTORY

Required. This specifies the data storage location(s) where the utility will create the primary segment data directories. The number of locations in the list dictate the number of primary segments that will get created per physical host (if multiple addresses for a host are listed in the host file, the number of segments will be spread evenly across the specified interface addresses). It is OK to list the same data storage area multiple times if you want your data directories created in the same location. The user who runs gpinitsystem (for example, the gpadmin user) must have permission to write to these directories. For example, this will create six primary segments per host:

declare -a DATA_DIRECTORY=(/data1/primary /data1/primary 
/data1/primary /data2/primary /data2/primary /data2/primary)
MASTER_HOSTNAME
Required. The host name of the master instance. This host name must exactly match the configured host name of the machine (run the hostname command to determine the correct hostname).
MASTER_DIRECTORY
Required. This specifies the location where the data directory will be created on the master host. You must make sure that the user who runs gpinitsystem (for example, the gpadmin user) has permissions to write to this directory.
MASTER_PORT
Required. The port number for the master instance. This is the port number that users and client connections will use when accessing the Greenplum Database system.
TRUSTED_SHELL
Required. The shell the gpinitsystem utility uses to execute commands on remote hosts. Allowed values are ssh. You must set up your trusted host environment before running the gpinitsystem utility (you can use gpssh-exkeys to do this).
CHECK_POINT_SEGMENTS
Required. Maximum distance between automatic write ahead log (WAL) checkpoints, in log file segments (each segment is normally 16 megabytes). This will set the checkpoint_segments parameter in the postgresql.conf file for each segment instance in the Greenplum Database system.
ENCODING
Required. The character set encoding to use. This character set must be compatible with the --locale settings used, especially --lc-collate and --lc-ctype. Greenplum Database supports the same character sets as PostgreSQL.
DATABASE_NAME
Optional. The name of a Greenplum Database database to create after the system is initialized. You can always create a database later using the CREATE DATABASE command or the createdb utility.
MIRROR_PORT_BASE
Optional. This specifies the base number by which mirror segment port numbers are calculated. The first mirror segment port on a host is set as MIRROR_PORT_BASE, and then incremented by one for each additional mirror segment on that host. Valid values range from 1 through 65535 and cannot conflict with the ports calculated by PORT_BASE.
REPLICATION_PORT_BASE
Optional. This specifies the base number by which the port numbers for the primary file replication process are calculated. The first replication port on a host is set as REPLICATION_PORT_BASE, and then incremented by one for each additional primary segment on that host. Valid values range from 1 through 65535 and cannot conflict with the ports calculated by PORT_BASE or MIRROR_PORT_BASE.
MIRROR_REPLICATION_PORT_BASE
Optional. This specifies the base number by which the port numbers for the mirror file replication process are calculated. The first mirror replication port on a host is set as MIRROR_REPLICATION_PORT_BASE, and then incremented by one for each additional mirror segment on that host. Valid values range from 1 through 65535 and cannot conflict with the ports calculated by PORT_BASE, MIRROR_PORT_BASE, or REPLICATION_PORT_BASE.
MIRROR_DATA_DIRECTORY

Optional. This specifies the data storage location(s) where the utility will create the mirror segment data directories. There must be the same number of data directories declared for mirror segment instances as for primary segment instances (see the DATA_DIRECTORY parameter). The user who runs gpinitsystem (for example, the gpadmin user) must have permission to write to these directories. For example:

declare -a MIRROR_DATA_DIRECTORY=(/data1/mirror 
/data1/mirror /data1/mirror /data2/mirror /data2/mirror 
/data2/mirror)
QD_PRIMARY_ARRAY, PRIMARY_ARRAY, MIRROR_ARRAY

These parameters can only be provided using an input configuration file, with the gpinitsystem -I input\_configuration\_file option. QD_PRIMARY_ARRAY, PRIMARY_ARRAY, and MIRROR_ARRAY define the Greenplum Database master host and the primary and mirror instances on the segment hosts, respectively, using the format:

<host>~<port>~<data_directory>/<seg_prefix<segment_id>>~<dbid>~<content_id>~<replication_port>

The Greenplum Database master always uses the value -1 for the segment ID and content ID. For example:

QD_PRIMARY_ARRAY=127.0.0.1~5432~/gpmaster/gpsne-1~1~-1~0
declare -a PRIMARY_ARRAY=(
127.0.0.1~40000~/gpdata1/gpsne0~2~0~6000
127.0.0.1~40001~/gpdata2/gpsne1~3~1~6001
)
declare -a MIRROR_ARRAY=(
127.0.0.1~50000~/gpmirror1/gpsne0~4~0~51000
127.0.0.1~50001~/gpmirror2/gpsne1~5~1~51001
)
You can use the gpinitsystem -O output\_configuration\_file to populate QD_PRIMARY_ARRAY, PRIMARY_ARRAY, MIRROR_ARRAY using the hosts, data directories, segment prefix, and base port values that you provide to the command. For recovery purposes, you can edit the segment and content IDs to match the values of an existing Greenplum Database backup.
HEAP_CHECKSUM

Optional. This parameter specifies if checksums are enabled for heap data. When enabled, checksums are calculated for heap storage in all databases, enabling Greenplum Database to detect corruption in the I/O system. This option is set when the system is initialized and cannot be changed later.

The HEAP_CHECKSUM option is on by default and turning it off is strongly discouraged. If you set this option to off, data corruption in storage can go undetected and make recovery much more difficult.

To determine if heap checksums are enabled in a Greenplum Database system, you can query the data_checksums server configuration parameter with the gpconfig management utility:

$ gpconfig -s data_checksums
HBA_HOSTNAMES

Optional. This parameter controls whether gpinitsystem uses IP addresses or host names in the pg_hba.conf file when updating the file with addresses that can connect to Greenplum Database. The default value is 0, the utility uses IP addresses when updating the file. When initializing a Greenplum Database system, specify HBA_HOSTNAMES=1 to have the utility use host names in the pg_hba.conf file.

For information about how Greenplum Database resolves host names in the pg_hba.conf file, see Configuring Client Authentication.

Examples

Initialize a Greenplum Database array by supplying a cluster configuration file and a segment host address file, and set up a spread mirroring (-S) configuration:

$ gpinitsystem -c gpinitsystem_config -h 
hostfile_gpinitsystem -S

Initialize a Greenplum Database array and set the superuser remote password:

$ gpinitsystem -c gpinitsystem_config -h 
hostfile_gpinitsystem --su-password=mypassword

Initialize a Greenplum Database array with an optional standby master host:

$ gpinitsystem -c gpinitsystem_config -h 
hostfile_gpinitsystem -s host09

Instead of initializing a Greenplum Database array, write the provided configuration to an output file. The output file uses the QD_PRIMARY_ARRAY and PRIMARY_ARRAY parameters to define master and segment hosts:

$ gpinitsystem -c gpinitsystem_config -h 
hostfile_gpinitsystem -S -O cluster_init.config

Initialize a Greenplum Database using an input configuration file (a file that defines the Greenplum Database array using QD_PRIMARY_ARRAY and PRIMARY_ARRAY parameters:

$ gpinitsystem -I cluster_init.config

See Also

gpssh-exkeys, gpdeletesystem

check-circle-line exclamation-circle-line close-line
Scroll to top icon