VMware HCX Network Extension is a layer-two bridging function initiated at the source site.

If you are using the HCX Manager UI (standalone or vSphere Client plug-in), you can extend networks by selecting one or more Distributed Port Groups or NSX segments. When you extend a network, a corresponding NSX segment is created at the destination site.

If you are using the vSphere Client Networking interface, you can select a Distributed Port Group and extend it.

Note:

For a list of restrictions regarding Network Extension, see Restrictions and Limitations for Network Extension.

For the operational limits supported with HCX Network Extension, see Configuration and Service Limits.

Procedure

  1. If you are using the HCX Manager UI, follow these steps to select a network for extension:
    1. In the HCX Services menu, select Network Extension.

      A summary screen appears displaying all configured site pairs. Expand a site pair to see the associated Service Mesh information. Expand a Service Mesh to see the associated Network Extensions.

    2. At the top of the page, select Extend Networks.

      A screen appears prompting you for the target site network selections.

    3. Select a Service Mesh.
      Note:

      If you have only one Service Mesh, it is selected by default.

    4. Select one or more Distributed Port Groups or NSX Logical Switches.

      You can use the available filters to hide networks that are ineligible for extension, hide networks that do not have virtual machines associated with them, or hide networks without extension.

    5. Click Next.
  2. If you are using the vSphere Client Networking interface, follow these steps to select a network for extension:
    1. From the vSphere menu, select Networking.
    2. Right-click a Distributed Port Group.
    3. Locate HCX Actions near the bottom of the list, and select Extend Network to HCX Target Site.

      A screen appears prompting you for the target site network selections.

    4. Expand Remote Site Connection and select a site.
      Note:

      If you have only one site pairing, it is selected by default.

  3. Use the drop-down menu to select the Destination First Hop Router.
  4. Provide the Gateway IP address and Prefix Length for the network being extended in the format <gateway IP/Prefix Length>. For example: 192.168.10.1/24.
  5. Select the Extension appliance.

    Select a Network Extension appliance or a Network Extension High Availability group.

  6. (Optional) For each source network, expand Settings - optional and select the appropriate options:
    Allow Overlapping VLAN

    The HCX Manager prevents you from extending networks that have the same VLAN ID and Gateway IP address. Select this option to override system and allow duplicate VLAN IDs.

  7. (Optional) Depending on the NSX version running in your data center, select Mobility Optimized Networking for all workloads that require routing through the local gateway at the target site.

    For more information about MON and additional configuration settings, see Understanding Network Extension with Mobility Optimized Networking.

  8. To finish, click Submit.

    To view the task status, navigate to the HCX Dashboard and scroll down to the Activity Logs display.

    Note:

    If any conflicting operations on the same appliances are running, then network extension requests are queued. Examples of conflicting operations include Service Mesh edits or resyncs, appliance operations such as redeploy or force resync, and network extension using the same high availability (HA) group.

Results

Return to the Network Extension page for a summary of information that includes the number of extended networks, extension appliances, mobility optimized networks, and network extension served by an HA group. The HA group name is used in place of appliance name with an HA tag to indicate the HA activation.