Horizon Client for Mac 4.10 | 13 December 2018
These release notes cover the following topics:
- Key Features
- What's New in This Release
- Before You Begin
- Resolved Issues
- Known Issues
Horizon Client for Mac makes it easy to access your remote desktops and published applications from your Mac with the best possible user experience on the Local Area Network (LAN) or across a Wide Area Network (WAN).
- Support for macOS Sierra (10.12), macOS High Sierra (10.13), and macOS Mojave (10.14) - Use a 64-bit Intel-based Mac to work on your remote desktop or published application.
- Unmatched performance - The adaptive capabilities of the PCoIP display protocol and the VMware Blast display protocol are optimized to deliver the best user experience, even over low-bandwidth and high-latency connections. Your remote desktop or published application is fast and responsive, regardless of where you are.
- Simple connectivity - Horizon Client for Mac is tightly integrated with VMware Horizon 6 and VMware Horizon 7 for simple setup and connectivity. Quickly reconnect to your remote desktop or published application by selecting shortcuts in Horizon Client.
- Secure from any location - At your desk or away from the office, your data is delivered securely to you wherever you are. Enhanced certificate checking is performed on the client. Horizon Client for Mac also supports optional RADIUS and RSA SecurID authentication.
- macOS Mojave (10.14) support
You can install Horizon Client for Mac on a macOS Mojave (10.14) system.
- Show category folders for published applications in the Applications folder
When Horizon Client for Mac is configured to run published applications from the Applications folder, you can enable the Allow automatic shortcuts from the server setting to make category folders configured for published applications appear in the Applications folder.
- Use published applications in multi-session mode
When multi-session mode is enabled for a published application, you can use multiple sessions of the published application when you log on to the server from different client devices. For example, if you open a published application in multi-session mode on client A, and then open the same published application on client B, the published application remains open on client A and a new session of the published application opens on client B.
- TLS v1.0 is disabled
TLS v1.0 is no longer supported.
- Collect support data
You can collect support data to help VMware troubleshoot problems with Horizon Client for Mac. To use this feature, select and click Collect Support Data. Horizon Client saves log files in a ZIP file in the Desktop folder.
- Use ActivClient middleware with smart card redirection
You can install ActivClient 7.x middleware on Windows 10 virtual desktops and ActivClient 6.2.x middleware on Windows 7 virtual desktops.
- Share Linux remote desktops
You can now use the Session Collaboration feature to share Linux remote desktops.
- Support for Virtual Printing on physical RDS host machines
The Virtual Printing feature is now supported for published desktops and published applications that are deployed on RDS hosts that are physical machines. This feature requires Horizon Agent 7.7.
The user interface and documentation for Horizon Client are available in English, Japanese, French, German, Simplified Chinese, Traditional Chinese, Korean, and Spanish.
- Horizon Client requires a macOS Sierra (10.12), macOS High Sierra (10.13), or macOS Mojave (10.14) operating system running on a 64-bit Intel-based Mac.
- Horizon Client is supported with the latest maintenance release of Horizon 6 version 6.2.x and later releases.
- To install Horizon Client for Mac, download the disk image file from the VMware Horizon Client download page. For system requirements and installation instructions, see the VMware Horizon Client for Mac Installation and Setup Guide document.
If you use a PIV smart card to authenticate to a Windows 7, XP, or Vista remote desktop on which ActivClient is installed, Horizon Client might stop responding when you log off from the desktop.
You cannot use a PIV smart card to authenticate to a Windows 8 or later remote desktop from an Mac OS X Mavericks (10.9) or later client system, or to a Windows Vista remote desktop from an Mac OS X Yosemite (10.10) or later client system.
With Windows 7 and later, if you use ActivClient in the agent machine, smart card redirection does not work because of a compatibility issue between ActivClient and the Apple system.
The known issues are grouped as follows.
- USB Redirection
- Smart Card Authentication
- Client Drive Redirection
- Displays and Keyboards
- Touch Bar
If you use the PCoIP display protocol, connecting some password-protected storage devices (such as IronKey USB flash drives) might not work correctly. For example, after you redirect the device to the remote desktop, the password prompt does not appear. The remote desktop shows that a new drive was added and so displays a new drive letter but no corresponding label to identify the device.
Workaround: Configure Horizon Client to automatically connect the device when you insert it. From the Horizon Client menu bar, select Desktop > USB > Autoconnect USB Devices on Insert.
When you insert an SD card into a Transcend USB 3.0 card reader attached to your Mac client system, the SD card is not mounted automatically. Because the SD card is not mounted on your Mac client system, the device does not appear in the Connection > USB menu in Horizon Client and you cannot use the USB redirection feature to connect the device to the remote desktop.
Workaround: Reinsert the SD card into the Transcend card reader. After the device is connected to the remote desktop, reinsert the SD card again to make the disk volume appear in the remote desktop.
If you use the USB redirection feature to connect a Transcend USB 3.0 external hard drive to a remote desktop from your Mac client system, files that you copy or move to the drive do not appear on the drive after you disconnect the drive from the remote desktop.
Workaround: Redirect the external hard drive to the remote desktop again. The files appear on the drive.
When you connect to a Windows remote desktop, start USB services, redirect a USB storage device to the remote desktop, disconnect from the remote desktop, and then try to reconnect to the remote desktop, either USB services are not available in the remote desktop or you cannot reconnect to the remote desktop. In Horizon Administrator, the state of the machine is Agent unreachable.
Workaround: If you are an end user, restart Horizon Client and try again. If you are a Horizon administrator, restart Horizon Agent in the machine.
When you use Horizon Client on macOS Sierra (10.12), Apple builtin USB devices are not automatically redirected to remote desktops when you configure Horizon Client to connect USB devices automatically when Horizon Client starts (Connection > USB > Automatically connect at startup).
If you use the client drive redirection feature to share a USB drive with a remote desktop, and you unplug the device and then plug it back in during the desktop session, you can no longer access the device in the remote desktop. Unplugging a USB drive during a session also removes the drive and folder entries from the Folder list on the Sharing panel in the Preferences dialog box and you must reshare the drive the next time you connect to the remote desktop.
Workaround: Do not unplug a shared USB drive during a remote desktop session unless you intend to stop using the device.
After you connect to a remote desktop with the USB Automatically connect at startup setting enabled, the desktop connection is sometimes disconnected.
If you connect and then reconnect to a remote desktop with the USB Automatically connect at startup setting enabled, not all USB devices appear in the USB menu after you reconnect to the desktop.
Workaround: Eject and then reinsert the USB device. For internal Mac devices, you might need to restart the computer.
When you start the USB service on a macOS High Sierra (10.13) system, the System Extension Blocked dialog box appears.
Workaround: Click OK in the System Extension Block dialog box, navigate to System Preferences > Security & Privacy, and allow the extension to load.
When you use Horizon Client on macOS Sierra (10.12) or later, Horizon Client stops responding when it reads a PIV smart card with Apple CryptoTokenKit PIVToken.
Workaround: Disable PIVToken by using one of the following methods: 1) Install PKard for Mac v1.7, which automatically disables the com.apple.CryptoTokenKit.pivtoken token; or 2) Enter the following command at the command line:
sudo defaults write /Library/Preferences/com.apple.security.smartcard DisabledTokens -array com.apple.CryptoTokenKit.pivtoken
On macOS 10.13 or later, the Keychain Access app does not refresh when you unplug and re-plug in a smart card/smart card reader, and the Mac client cannot obtain the update status for the smart card. Because of this issue, the following problems might occur in Horizon Client on macOS 10.13 or later:
- Smart card authentication does not work after you unplug and re-plug in a smart card/smart card reader.
- Smart card redirection might not work after you unplug and re-plug in a smart card/smart card reader several times.
- The smart card removal policy on the agent machine might not work.
Workaround: For the smart card authentication issue, quit both Keychain Access and the Horizon Client app, relaunch Horizon Client, and perform smart card authentication again, making sure that Keychain Access is not launched. For the smart card redirection issue, reboot the Mac client machine, launch Horizon Client, and perform smart card authentication again, making sure that Keychain Access isn't launched. There is no workaround for the smart card removal policy issue.
If you set the Horizon Client security preference (VMware Horizon Client > Preferences > Security) to Do not verify server identity certificates and connect to a server that has a valid root-signed certificate, Horizon Client might stop responding.
Workaround: Unplug the smart card reader and then plug it back in.
The Microsoft minidriver does not work for PIV smart card redirection with Windows 8, Windows 10, Windows Server 2012 R2, and Windows Server 2016 remote desktops.
Workaround: For a Windows 10 remote desktop, open the Microsoft smart card service manually if it is stopped. The service stops automatically if it is idle for more than one minute. There is no workaround for Windows 8, Windows Server 2012 R2, or Windows Server 2016 remote desktops.
If multiple Horizon clients connect to the same RDS desktop or remote application simultaneously and map to a location-based printer with the same name, the printer appears in the first client session, but not in later client sessions.
Workaround: For the client sessions in which the printer does not appear, perform a manual refresh. For a remote desktop, press F5 or refresh the Devices and Printers window. For a remote application, close and reopen the application print dialog box. The location-based printer appears in the printer list.
Sometimes the virtual printing feature and location-based printing feature are not able to display the correct list of printers in the Devices and Printers window of a remote, session-based desktop. This issue can occur with desktops provided by Windows Server 2012 RDS hosts. The printers shown within applications are correct, however.
Workaround: Log off the desktop running on the Windows Server 2012 RDS host and reconnect to it.
If you use the client drive redirection feature to share a folder or drive with remote desktops and applications, but you connect to a remote desktop or application that does not support client drive redirection, an error message is not displayed to notify you that the folder or drive was not shared.
Workaround: Install View Agent 6.1.1 or later in the remote desktop or RDS host. View Agent 6.1.1 or later is required to use the client drive redirection feature.
If you connect to a Windows 2016 RDS desktop, use the client drive redirection to share a local folder with the remote desktop, edit a Microsoft Office file in the shared folder, and then navigate to a different folder on the remote desktop, the remote desktop might stop responding.
Workaround: None. This problem is a Microsoft issue.
- In certain circumstances, opening a local file with File > Open in a remote desktop or remote application causes the guest operating system on the Horizon Agent machine to encounter a STOP error (blue screen) or to stop responding (hang) when client drive redirection (CDR) is used. For more information, see VMware Knowledge Base (KB) article 2149417: Agent machine gets STOP error or stops responding when you open a local file shared with CDR.
Keyboard shortcut mappings do not work if you are connected to a remote desktop or application and the Mac Input Source is Traditional Chinese or Korean.
Workaround: Before you connect to the remote desktop or application, switch to the English Input Source on the Mac client system. If you are already connected to the remote desktop or application, reconnect to the Connection Server instance and switch to the English Input Source on the Mac client system before you connect to the remote desktop or application.
- Connection > Resolution > Full Resolution
If you launch a remote desktop with the PCoIP display protocol or the VMware Blast display protocol in full screen or window mode on an iMac with a Retina or monitor that supports a 5K display, and the screen size is more than 4K (4096 x 2160), auto fit does not work for the remote desktop if you change the display to full resolution.
Workaround. None. This problem is caused by a PCoIP or VMware Blast limitation.
When you use Horizon Client on macOS Sierra (10.12), the remote desktop window exits from Tab mode when you enter full-screen mode or Split mode.
Workaround: None. This behavior is by design for Horizon Client.
When you connect to a remote desktop that is running Windows 10 Creators Update with the VMware Blast display protocol, autofit fails when the desktop enters full screen with two displays.
Workaround: Resize the window and autofit recovers.
When you connect to a remote desktop with the VMware Blast display protocol from a Mac client system that has an NVIDIA GeForce GT 755M graphics card, the desktop stops responding.
Workaround: None. This is a third-party issue.
When you are using a remote desktop in full-screen mode on multiple displays, if you click Customize Touch Bar on the external display and click Done, the Open selection window and Launch Item List Touch Bar items do not work.
Workaround: This problem is a third-party issue. Apple fixed this issue in macOS 10.14 Mojave.
You might lose focus for the front window when you use the Touch Bar to switch between published applications that are hosted on Windows Server 2016. This problem can also occur when you press Command+~, or click the dock icon, to switch windows. This problem typically only occurs after switching windows several times.
Workaround: Use the mouse to click the window and regain focus.
Changes to webcam and audio devices that are connected to, or disconnected from, the Mac client system during a remote desktop session are not detected by the Real-Time Audio-Video feature.
Workaround: Disconnect and reconnect to your remote desktop session to detect webcam and audio device changes. For example, if you connect a USB headset to the Mac client system during a remote desktop session and you want to use that headset on the remote desktop, you must disconnect and reconnect to the remote desktop session to make the headset available.
If an administrator edits an application pool in Horizon Administrator and changes the path to point to a different application that already has an application pool associated with it, unexpected results can occur. For example, the original application might be launched from the Mac Dock instead of the new application.
Workaround: Make sure that each application in a farm is associated with only one application pool.
Users cannot launch an application from the Mac Dock if multiple application pools point to the same application in one farm, and if the application pool the users selected was created with associated parameters in Horizon Administrator. If a user saves the application in the Mac Dock and tries to open the saved item, the application fails to launch with the associated parameters.
Workaround: Make sure that each application in a farm is associated with only one application pool.
If you use Horizon Client on a new MacBook, and you use the USB-C port to connect to the network, you might notice poor performance when copying and pasting between a remote desktop to a shared folder.
If you select the Remember this password check box when you log in to a server, you cannot log in to the same server as a different user if the credential caching timeout period (clientCredentialCacheTimeout) on the server has not yet expired. Horizon Client will automatically use the saved credentials to log you in to the server.
Workaround: Remove the server from the Selector window (right-click the server icon and select the Delete menu item), click the Add Server button to add the server again, and then log in to the server as the different user.
When you use Horizon Client on macOS Sierra (10.12), the remote desktop window turns black if you connect and reconnect to a Windows Server 2012 RDS desktop and then select Window > Show Tab Bar.
Workaround: Reset the remote desktop virtual machine.
If you use Horizon Client on macOS Sierra (10.12), and you connect to a server that is configured for URL Content Redirection, depending on the configuration, the popup dialog box Do you want to change your default browser to browsername or keep using "VMware Horizon URL Filter" appears behind the app windows. Also, if you try to set or change the default browser from the browser settings, you can see the popup dialog box behind the app windows on the server login.
Workaround: Navigate behind the app windows to view the popup dialog and click the Keep using "VMware Horizon URL Filter" button.
On late 2016 MacBook Pro client systems, the response time of Windows Server 2016 hosted remote applications is slow in the first few seconds after you launch a Windows Server 2016 application or switch the top window between Horizon Client and the Windows Server 2016 application window.
Workaround: None. This problem is a third-party issue.
If you connect to a remote application for which the pre-launch feature is enabled on the Horizon server, and the Horizon Client reconnect behavior is set to "Ask to reconnect to open applications" or "Do not ask to reconnect and do not automatically reconnect," resumed application sessions are disconnected after the pre-launch timeout expires (default 10 minutes).
Workaround: Set the Horizon Client reconnect behavior to "Reconnect automatically to open applications."
With Moom 3.2.12 (3240), the Moom UI appears when you hover your mouse over the Close icon, not the maximize icon, in Office 2016 and 2019 apps.
You might lose focus for the front window when you use custom controls in the Moom app to move or resize published applications that are hosted on Windows Server 2016 or Windows Server 2019.
Workaround: To regain focus, use your mouse to click on the title bar of the application window.
Horizon Client for Mac stops responding if you unplug an external graphics processing unit (GPU).