Horizon Client for Windows 4.6 | 21 September 2017
Last Updated: 02 October 2017
These release notes cover the following topics:
VMware Horizon Client for Windows makes it easy to access your remote desktops and published applications with the best possible user experience on the Local Area Network (LAN) or across a Wide Area Network (WAN).
- Support for Windows 10, Windows 8 and 8.1 (with Updates), and Windows 7
- Unmatched performance - The adaptive capabilities of the PCoIP display protocol and the VMware Blast display protocol are optimized to deliver the best user experience, even over low-bandwidth and high-latency connections. Your remote desktops and published applications are fast and responsive, regardless of where you are.
- Simple connectivity - Horizon Client for Windows is tightly integrated with VMware Horizon 6 and Horizon 7 for simple setup and connectivity.
- Secure from any location - At your desk or away from the office, your data is delivered securely to you wherever you are. SSL/TLS encryption is always used to protect user credentials, and enhanced certificate checking is performed on the client device. Horizon Client supports optional RADIUS and RSA SecurID authentication. You can also install Horizon Client so that it runs in FIPS mode.
- Support for pre-launched applications
A Horizon 7 administrator can configure a published application so that an application session is launched before you open the published application in Horizon Client. When a published application is pre-launched, the application opens more quickly in Horizon Client. This feature requires Horizon 7 version 7.2 or later on the server.
- Support for server-created Start menu shortcuts for remote desktops and published applications
A Horizon 7 administrator can configure Start menu shortcuts for remote desktops and published applications. If you are entitled to remote desktops or published applications that have shortcuts, Horizon Client places the shortcuts in the Start menu on your local system when you connect to the server. This feature requires Horizon 7 version 7.3.1 or later on the server.
- HTML5 multimedia redirection with Chrome
A Horizon 7 administrator can configure the HTML5 Multimedia Redirection feature to redirect HTML5 multimedia content from a remote desktop to your local system when you use the Chrome browser. Because your local system plays the HTML5 multimedia content, you have a better audio and video experience. The HTML5 Multimedia Redirection feature is enabled by default in Horizon Client during installation. A Horizon 7 administrator must enable HTML5 Multimedia Redirection in the remote desktop during Horizon Agent installation. Horizon Agent 7.3.1 is required.
- New command-line properties for the Horizon Client for Windows installer
The following command-line properties have been added to the Horizon Client for Windows installer:
- INSTALL_HTML5MMR - specifies whether to install HTML5 Multimedia Redirection support.
- REMOVE - specifies the features not to install.
- STARTMENU_SHORTCUT - specifies whether to create a Start menu shortcut for Horizon Client on your local system.
- Support for UNC paths with client drive redirection
You can now use the client drive redirection feature to redirect mapped drives that have UNC (Universal Naming Convention) paths.
- USB redirection support in nested mode
The USB redirection feature is now supported when you use Horizon Client in nested mode.
- SHA-256 support
Horizon Client has been updated to support the SHA-256 cryptographic hash algorithm.
- OpenSSL 1.0.2l support
The OpenSSL library is updated to version openssl-1.0.2l.
The user interface and documentation for Horizon Client are available in English, Japanese, French, German, Simplified Chinese, Traditional Chinese, Korean, and Spanish.
- For the Windows operating systems that this release of Horizon Client for Windows supports, see the VMware Horizon Client for Windows Installation and Setup Guide document.
- For information about Windows 10 upgrade requirements for Horizon Client for Windows, see VMware Knowledge Base (KB) article 2148201: Windows 10 Upgrade Requirements for Horizon Client.
- Horizon Client for Windows is supported with the latest maintenance release of Horizon 6 version 6.x and later.
- To install Horizon Client for Windows, download the installer from the VMware Horizon Client download page.
- For installation instructions, see the VMware Horizon Client for Windows Installation and Setup Guide document.
When attempting to use the Real-Time Audio-Video feature on a Surface Pro 4 device, you see only a black screen. This issue occurs because the client needs to be configured to accommodate the default screen resolution for a Surface Pro 4, which is 1920 X 1080.
Workaround: On the Windows client machine, edit the following registry keys under HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware VDM\RTAV:
- Set srcWCamFrameHeight to 1080.
- Set srcWCamFrameWidth to 1920.
The serial port redirection group policy setting Bandwidth Limit does not set a limit on the bandwidth.
Workaround: Use third-party software to limit the bandwidth.
With serial port redirection, at a high baud rate such as 115200, the performance of VMware Blast is significantly worse than PCoIP, and the connection might sometimes hang.
Workaround: Use a baud rate of 9600.
In an IPv6 environment, if you configure IP address mapping for location-based printing, users might encounter a problem accessing the printer because the client can have multiple IPv6 addresses. Anytime the client connects, it can use any one of the addresses.
Workaround: Use the location-based printing group policy setting IP Range to include the multiple addresses. However, the printing problem might still occur because the client might use a temporary address, which is not in the specified range.
- If you use Horizon Client to connect to a remote desktop that has client drive redirection disabled, such as through a group policy setting, or if you connect to a remote desktop that has View Agent 6.1.0 or an earlier version installed, no message is displayed to explain why the client drive redirection feature is not working.
On Windows 7 and Windows Server 2008 R2 desktops, if you remove a drive from being shared on the desktop, Windows Explorer continues to display the removed drive in the guest operating system.
Workaround: Close and reopen Windows Explorer.
On Windows 7 and Windows Server 2008 R2 desktops, if you open files in a shared folder on the desktop, disconnect from the desktop, and reconnect to the desktop, the left navigation pane in Windows Explorer displays duplicate entries for the shared drive.
Workaround: Close and reopen Windows Explorer.
- On Windows 7 client systems, you cannot use the Windows Media MMR feature with videos that use Dolby AC3 audio. On Windows 7 clients, Windows Media Foundation does not have the proper codec to support Dolby AC3 audio files. This issue does not occur on Windows 8.x clients.
Sometimes the virtual printing feature and location-based printing feature are not able to display the correct list of printers in the Devices and Printers window of a remote, session-based desktop. This issue can occur with desktops provided by Windows Server 2012 RDS hosts. The printers shown within applications are correct, however.
Workaround: Log off the desktop running on the Windows Server host and reconnect to it.
Virtual printing might not work if you connect to a remote desktop using RDP, open Horizon Client on the remote desktop, launch a nested application session, and then log off and log back in to the desktop. When you try to print from the nested application, the expected printer list might not appear. This issue only occurs after you log back in to the desktop.
Workaround: Reset the application on the remote desktop. To avoid having to set applications, use PCoIP for both ends of the session-in-session connection. That is, use PCoIP to connect to the remote desktop and use PCoIP to connect from within the desktop to the nested application. If you are using location-based printing, you can resolve this issue by closing and reopening the application's print dialog box.
If multiple Horizon clients connect to the same RDS desktop or remote application simultaneously and map to a location-based printer with the same name, the printer appears in the first client session, but not in later client sessions. This problem also occurs for client-redirected virtual printers.
Workaround: For the client sessions in which the printer does not appear, perform a manual refresh. For a remote desktop, press F5 or refresh the Devices and Printers window. For a remote application, close and reopen the application print dialog box. The location-based printer appears in the printer list.
If your client operating system is Windows 8.1 and you launch a Microsoft RDP session, pressing Ctrl+Alt+Insert does not send Ctrl+Alt+Del to the remote virtual desktop.
Workaround: Upgrade the operating system by installing Windows 8.1 Update.
- If you use a touch-enabled screen on your client system to work in a View desktop, do not use the Enable Relative Mouse feature. This feature provides improved mouse performance for 3D and CAD applications, but for touch-enabled screens and tablets, the mouse coordinates are not translated properly, even in 3D and CAD applications.
If you have multiple monitors with different screen resolutions and expand Horizon Client to all monitors and then select the Enable Relative Mouse feature, occasionally, the mouse pointer might not be able to move downward beyond a certain position.
Workaround: Press Ctrl+Alt.
When a user connects to a desktop using PCoIP shortly after the desktop is powered on, autofit of the desktop window might not work. This issue happens most often if the desktop or network is under stress shortly after power-on (to start multiple applications or to map network drives, for example).
Workaround: Double-click the desktop window's title to go into window mode and double-click the title bar to go into all-monitor mode.
On Windows 10, Windows Fax and Scan hangs when using a CardScan 800 device.
When you use the Flash redirection feature to play a video on some websites, such as www.ted.com, you cannot exit full-screen mode because the Exit Full Screen button does not appear in the Flash player toolbar.
Workaround: Press Ctrl+Alt+Delete and unlock the client side to see the Horizon Client toolbar and then adjust the window size to
make the Flash player window smaller.
When you use the Flash redirection feature to play a video, if you click the Ad link at the bottom of the screen or the More Info link in the Flash player, the advertisment page does not pop up and the playback pauses.
If you enable the URL content redirection feature, registry keys and values under HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware VDM\URLRedirection remain after you uninstall Horizon Client.
If LockedGuestSize is set to 640x480 on the client machine and you launch a remote desktop in Window - Small mode, the resolution helper tooltip does not appear when you drag the window edge.
- In certain circumstances, opening a local file with File > Open in a remote desktop or remote application causes the guest operating system on the Horizon Agent machine to encounter a STOP error (blue screen) or to stop responding (hang) when client drive redirection (CDR) is used. For more information, see VMware Knowledge Base (KB) article 2149417: Agent machine gets STOP error or stops responding when you open a local file shared with CDR.
If you install Horizon Agent and then install Horizon Client on the same Windows machine (a nested mode installation), and you later uninstall Horizon Agent, the client's "log in as current user" function is lost after Horizon Agent is uninstalled. This problem occurs because the wsnotify.dll file is removed after Horizon Agent is uninstalled.
Workaround: Reinstall Horizon Agent or Horizon Client to bring back the "log in as current user" function.
The DPI synchronization feature does not work with a Windows Server 2008 R2 remote desktop.
Workaround: Install Microsoft Hotfix You cannot change the DPI setting through a Remote Desktop session on a computer that is running Windows 7 or Windows Server 2008 R2 in the remote desktop.
If you connect multiple USB devices to the client system, select Automatically connect at startup in Horizon Client, and then connect, disconnect, and quickly reconnect to a remote desktop, not all of the USB devices are redirected to the remote desktop after you reconnect.
Workaround: Wait for the USB devices to be redirected back to the client machine (for example, wait for the devices to appear in the device manager) and then reconnect to the remote deskop. Alternatively, you can manually redirect any unredirected USB devices to the remote desktop.
After you disconnect and reconnect multiple remote desktops, you see an error message that states that an error occurred when connecting a USB device to your remote desktop. This problem typically occurs when multiple USB devices are connected to the client machine and you select Automatically connect at startup in Horizon Client.
Workaround: Close the error message box and manually redirect the USB devices to the remote desktop.
If you use the RDP protocol to connect to a published desktop from a physical machine, and then you try to connect to the same published desktop from a zero client, the RDP session ends on the physical machine and the zero client cannot connect.
Workaround: Relaunch the same desktop pool with RDP from the physical machine, select Options > Disconnect and logoff in the launched RDP session, and then reconnect to the same desktop pool from the zero client.
When you use the client drive redirection feature to share a folder, if the folder name is longer than 117 characters, a red X appears on top of the redirected folder icon in the remote desktop or application.
A “Pending session expired” error might occur when you try to connect to a remote desktop with the Microsoft RDP display protocol. This problem only occurs in large-scale environments where a Unified Access Gateway appliance is used and virtual printing is enabled.
Workaround: Establish a connection to the remote desktop without using a Unified Access Gateway appliance, or disable virtual printing and establish a connection using RDP.
The Horizon Client for Windows documentation states that if you use instant clone desktops pools, the maximum number of monitors that you can use to display a remote desktop is two, with a resolution of up to 2560 X 1600. This limitation was removed beginning in Horizon 7 version 7.2.
When virtual printing is used in Horizon Client, the client processes might not end when you disconnect and close Horizon Client. This problem is caused by a hang that occurs when the virtual printing feature is unloaded.
Workaround: See VMware Knowledge Base (KB) article 2003626: Disabling virtual printing (ThinPrint) in VMware Horizon Client for Windows.