If you prefer an interactive NSX Controller installation, you can use a UI-based VM management tool, such as the vSphere Client connected to vCenter Server.

The installation succeeds if the password does not meet the requirements. However, when you log in for the first time, you are prompted to change the password.

Important:

The core services on the appliance do not start until a password with sufficient complexity has been set.

Important:

The NSX-T Data Center component virtual machine installations include VMware Tools. Removal or upgrade of VMware Tools is not supported for NSX-T Data Center appliances.

Prerequisites

  • Verify that the system requirements are met. See System Requirements.

  • Verify that the required ports are open. See Ports and Protocols.

  • If you do not already have one, create the target VM port group network. It is recommended to place NSX-T Data Center appliances on a management VM network.

    If you have multiple management networks, you can add static routes to the other networks from the NSX-T Data Center appliance.

  • Plan your IPv4 IP address scheme. In this release of NSX-T Data Center, IPv6 is not supported.

  • Verify that you have adequate privileges to deploy an OVF template on the ESXi host.

  • Verify that hostnames do not include underscores. Otherwise, the hostname is set to nsx-controller.

  • A management tool that can deploy OVF templates, such as vCenter Server or the vSphere Client.

    The OVF deployment tool must support configuration options to allow for manual configuration.

  • The Client Integration Plug-in must be installed.

Procedure

  1. Locate the NSX Controller OVA or OVF file.

    Either copy the download URL or download the OVA file onto your computer.

  2. In the management tool, launch the Deploy OVF template wizard and navigate or link to the .ova file.
  3. Enter a name for the NSX Controller, and select a folder or datacenter.

    The name you type will appear in the inventory.

    The folder you select will be used to apply permissions to the NSX Controller.

  4. Select a datastore to store the NSX Controller virtual appliance files.
  5. If you are using vCenter, select a host or cluster on which to deploy the NSX Controller appliance.
  6. Select the port group or destination network for the NSX Controller.
  7. Specify the NSX Controller passwords and IP settings.
  8. (Optional) For optimal performance, reserve memory for the NSX-T Data Center component.

    A memory reservation is a guaranteed lower bound on the amount of physical memory that the host reserves for a virtual machine, even when memory is overcommitted. Set the reservation to a level that ensures the NSX-T Data Center component has sufficient memory to run efficiently. See System Requirements.

  9. Open the console of the NSX-T Data Center component to track the boot process.
  10. After the NSX-T Data Center component boots, log in to the CLI as admin and run the get interface eth0 command to verify that the IP address was applied as expected.
    nsx-component> get interface eth0
    Interface: eth0
      Address: 192.168.110.25/24
      MAC address: 00:50:56:86:7b:1b
      MTU: 1500
      Default gateway: 192.168.110.1
      Broadcast address: 192.168.110.255
      ...
    
  11. Verify that your NSX-T Data Center component has the required connectivity.

    Make sure that you can perform the following tasks.

    • Ping your NSX-T Data Center component from another machine.

    • The NSX-T Data Center component can ping its default gateway.

    • The NSX-T Data Center component can ping the hypervisor hosts that are in the same network as the NSX-T Data Center component using the management interface.

    • The NSX-T Data Center component can ping its DNS server and its NTP server.

    • If you enabled SSH, make sure that you can SSH to your NSX-T Data Center component.

    If connectivity is not established, make sure the network adapter of the virtual appliance is in the proper network or VLAN.

What to do next

Join the NSX Controller with the management plane. See Join NSX Controllers with the NSX Manager.