Advertise Tier-1 NAT Routes to the Upstream Tier-0 Router in Manager Mode

Advertising tier-1 NAT routes enables the upstream tier-0 router to learn about these routes.

Prerequisites

Verify that Manager mode is selected in the NSX Manager user interface. See NSX Manager. If you do not see the Policy and Manager mode buttons, see Configure User Interface Settings.

Procedure

1. From your browser, log in with admin privileges to an NSX Manager at https://<nsx-manager-ip-address>.
2. Select Networking > Tier-1 Logical Routers.
3. Click a tier-1 logical router on which you have configured NAT.
4. From the tier-1 router, select Routing > Route Advertisement.
5. Click Edit to edit the route advertisement configuration.
   You can toggle the following switches:

   • Status
   • Advertise All NSX Connected Routes
   • Advertise All NAT Routes
   • Advertise All Static Routes
   • Advertise All LB VIP Routes
   • Advertise All LB SNAT IP Routes
   • Advertise All DNS Forwarder Routes
6. Click Save.

What to do next

Advertise tier-1 NAT routes from the tier-0 router to the upstream physical architecture.