View BFD status between transport nodes. Each transport node detects connectivity status with another remote transport node through a tunnel status that displays the BFD status among other details related to the node.

Both Host Transport nodes (standalone and hosts registered to a vCenter) and Edge nodes display the tunnel status. BFD packets support both GENEVE and STT encapsulation. GENEVE is the default encapsulation.

Procedure

  1. From a browser, log in with admin privileges to an NSX Manager at https://<nsx-manager-ip-address>.
  2. Navigate to System > Fabric > Nodes > Host Transport Nodes.
  3. On the Tunnel column, click the tunnel number that is displayed.
    The Monitor page displays the status of tunnel, BFD diagnostic code, remote node UUID, encapsulation on BFD packets, and tunnel name.
    The tunnel BFD diagnostic code indicates the reason for the change in the session state.
    Code Description

    0

    No Diagnostic
    1

    Control Detection Time Expired
    2

    Echo Function Failed
    3

    Neighbor Signaled Session Down
    4

    Forwarding Plane Reset
    5

    Path Down
    6

    Concatenated Path Down
    7

    Administratively Down
    8

    Reverse Concatenated Path Down

Results

If the BFD status is down, use the diagnostic code to establish connectivity between transport nodes.