After the infrastructure is prepared for extending Layer 2 networks, you can migrate your NSX Data Center for vSphere hosts to NSX-T host transport nodes.

Prerequisites

  • Configure several settings related to the host migration, including migration order and enabling hosts. Make sure that you understand the effects of these settings. See Configuring NSX Data Center for vSphere Host Migration for more information. Understanding the host migration settings is especially important when you use Distributed Firewall or vSphere Distributed Switch 7.0.
  • In the vCenter Server UI, go to the Hosts and Clusters page, and verify that all ESXi hosts are in an operational state. Address any problems with hosts including disconnected states. There must be no pending reboots or pending tasks for entering and exiting maintenance mode.

Procedure

  1. On the Migrate Hosts page, click Start.

    If you selected the In-Place or Automated Maintenance migration mode for all hosts groups, the host migration starts.

  2. If you selected the Manual Maintenance migration mode for any host groups, you must complete one of the following tasks for each VM so that the hosts can enter maintenance mode.
    Option Action
    Power off or suspend VMs.
    1. Right click the VM and select Power > Power off , Power > Shut Down Guest OS, or Power > Suspend.
    2. After the host has migrated, attach the VM interfaces to the appropriate NSX-T segments and power on the VM.
    Move VMs using vMotion.
    1. Right click the VM and select Migrate. Follow the prompts to move the VM to a different host.
    Move VMs using cold migration.
    1. Right click the VM and select Power > Power off , Power > Shut Down Guest OS, or Power > Suspend.
    2. Right click the VM and select Migrate. Follow the prompts to move the VM to a different host, connecting the VM interfaces to the appropriate NSX-T segments.
    The host enters maintenance mode after all VMs are moved, powered off, or suspended. If you want to use cold migration to move the VMs to a different host before the migrating host enters maintenance mode, you must leave at least one VM running while you move VMs. When the last VM is powered off or suspended, the host enters maintenance mode, and migration of the host to NSX-T starts.

Results

After a host has migrated to NSX-T using In-Place migration mode, you might see a critical alarm with message Network connectivity lost. This alarm occurs when a vSphere Distributed Switch (VDS) 6.5 or 6.7 migrates to an N-VDS because the host no longer has a physical NIC connected to the VDS it was previously connected to. To restore the migrated hosts to the Connected state, click Reset to Green on each host, and suppress the warnings, if any.

If migration fails for a host, the migration pauses after all in-progress host migrations finish. When you have resolved the problem with the host, click Retry to retry migration of the failed host.

If migration fails for a host, you can move its host group to the bottom of the list of groups. The migration of other host groups can proceed while you resolve the problem with the failed host.

What to do next

  1. Verify that the expected configuration items have been migrated to the NSX-T environment. For example, check whether the following configurations are migrated successfully:
    • User-defined Distributed Firewall rules.
    • All Grouping objects, such as IP Sets, Groups, Tags, and so on.
    • Effective members are displayed in the dynamic Groups.
    • Tags are applied to migrated workload VMs.
    Verify that the VMs running on the NSX-T hosts are connected to the correct NSX-T overlay segment and validate the following connectivity:
    • VM-to-VM connectivity in the NSX-T network.
    • Connectivity of the VMs to the external machines outside the NSX-T network, provided the DFW rules allow it.
  2. On the Migrate Hosts page, click Finish.

    A dialog box appears to confirm finishing the migration. If you finish the migration, all migration details are cleared. You can no longer review the settings of this migration. For example, which inputs were made on the Resolve Configuration page, or which hosts were excluded from the migration.