A Segment DHCP server provides a dynamic IP assignment service only to the VMs that are attached to the segment. NSX supports Segment DHCP server configuration on the downlink interface and the service interface. You can configure a Segment DHCPv4 server, or a Segment DHCPv6 server, or both, on the segment.

The following figure shows a sample network topology that has a Segment DHCP server configured on four networks.


The topology in this diagram is explained in the surrounding text of this figure.
In this network topology, a Segment DHCP server is configured on the following networks:
  • Network-2 is connected to the downlink interface of tier-1 gateway.
  • Network-1 is connected to the service interface of tier-0 gateway.
  • Network-4 is connected to the service interface of tier-1 gateway.
  • Network-3 is an isolated segment, which is not connected to any gateway.

Procedure

  1. From your browser, log in with admin privileges to an NSX Manager at https://nsx-manager-ip-address.
  2. Select Networking > Segments.
  3. Find the segment where you want to configure the DHCP service. Next to the segment name, click Actions menu, and then click Edit.
  4. Click Set DHCP Config.
  5. From the DHCP Type drop-down menu, select Segment DHCP Server.
  6. (Required) From the DHCP Profile drop-down menu, select a DHCP server profile. If no profile is available in the drop-down menu, click Actions menu and then click Create New to add a DHCP server profile. After the profile is created, it is automatically attached to the segment.
    For more information about creating a DHCP server profile, see Add a DHCP Server Profile.
  7. Click the DHCP Config toggle button to enable DHCP configuration on the segment.
    If you are configuring a Segment DHCPv4 server and a Segment DHCPv6 server, ensure that you enable the DHCP Config toggle button in both the IPv4 Server and IPv6 Server tabs.
  8. Specify the following DHCP configuration settings:
    • DHCP Server Address
    • DHCP Ranges
    • Optional: Excluded Ranges (only for DHCPv6)
    • Optional: Lease Time
    • Optional: Preferred Time (only for DHCPv6)
    • Optional: Domain Names (only for DHCPv6)
    • Optional: DNS Servers
    • Optional: SNTP Servers (only for DHCPv6)
    • Optional: DHCP Options (only for DHCPv4)
    • Optional: Static Bindings

    For a detailed information about these DHCP configuration settings, see the reference documentation at DHCP Configuration Settings: Reference.

  9. Click Apply.