If your NSX-V environment uses Edge Services Gateways, you must create an IP pool in the NSX environment for the Edge Tunnel End Points (TEP) before you start the migration.
Prerequisites
- Identify existing IP pools or DHCP ranges for NSX-V VTEPs.
- Determine which IP addresses to use to create an IP pool for Edge TEPs.
The IP range and VLAN must not already be in use in the NSX-V environment.
- Verify that the NSX TEP IP addresses have network connectivity to the NSX-V VTEP IP addresses.
Procedure
- From a browser, log in with admin privileges to an NSX Manager at https://nsx-manager-ip-address.
- Select .
- Click Add IP Address Pool.
- Enter a name for the new IP pool.
- (Optional) Enter a description.
- In the Subnets column, click Set to add subnets.
- Specify the IP ranges.
- Select .
- Enter IPv4 or IPv6 ranges.
- Enter the subnet address in a CIDR format.
- Enter the Gateway IP address for this subnet.
- (Optional) Enter DNS servers.
- (Optional) Enter DNS suffix.
- Click Add, and then click Apply.
- Click Save.