Based on the Access Level configured, you can run the following CLI commands:
Note: Run the
help <command name> to view a brief description of the command.
| Commands | Description | Access Level = Basic | Access Level = Privileged |
|---|---|---|---|
| Interaction Commands | |||
| help | Displays a list of available commands. | Yes | Yes |
| pagination | Paginates the output. | Yes | Yes |
| clear | Clears the screen. | Yes | Yes |
| eof | Exits the secure Edge CLI. | Yes | Yes |
| Debug Commands | |||
| edgeinfo | Displays the Edge’s hardware and firmware information. For a sample output of the command, see edgeinfo. | Yes | Yes |
| seainfo | Displays details about the secure Edge access of the user. For a sample output of the command, see seainfo. | Yes | Yes |
| ping, ping6 | Pings a URL or an IP address. | Yes | Yes |
| tcpdump | Displays TCP/IP and other packets being transmitted or received over a network to which the Edge is attached. For a sample output of the command, see tcpdump. | Yes | Yes |
| pcap | Captures the packet data pulled from the network traffic and prints the data to a file. For a sample output of the command, see pcap. | Yes | Yes |
| debug | Runs the debug commands for Edges. Run debug -h to view a list of available commands and options. For a sample output of one of the debug commands, see debug --dpdk_ports_dump. | Yes | Yes |
| diag | Runs the remote diagnostics commands. Run diag -h to view a list of available commands and options. For a sample output of one of the diag commands, see diag ARP_DUMP. | Yes | Yes |
| ifstatus | Fetches the status of all interfaces. For a sample output of the command, see ifstatus. | Yes | Yes |
| getwanconfig | Fetches the configuration details of all WAN interfaces. Use the logical names such as "GE3" or "GE4" as arguments to fetch the configuration details of that interface. Do not use the physical names such as "ge3" or "ge4" of the WAN interfaces. For example, run getwanconfig GE3 to view the configuration details of the GE3 WAN interface. Run the ifstatus command to know the interface name mappings. For a sample output of the command, see getwanconfig. | Yes | Yes |
| Configuration Command | |||
| setwanconfig | Configures WAN interfaces (wired interfaces only). Run setwanconfig -h to view configuration options. | Yes | Yes |
| Edge Actions Commands | |||
| deactivate | Deactivates the Edges and reapplies the initial default configuration. | No | Yes |
| restart | Restarts the SD-WAN service. | No | Yes |
| reboot | Reboots the Edge. | No | Yes |
| shutdown | Powers off the Edge. | No | Yes |
| hardreset | Deactivates the Edges, restores the Edge’s default configuration, and restores original software version. | No | Yes |
| edged | Activates or deactivates the Edge processes. | No | Yes |
| restartdhcpserver | Restarts the DHCP server. | No | Yes |
| Linux Shell Command | |||
| shell | Takes you into the Linux shell. Type exit to return to the secure Edge CLI. | No | Yes |
