About VMware Smart Assurance IP Manager Certification

Certification is a process by which VMware Inc. ensures that the devices that are managed by the IP Manager are properly represented in the modeled topology, and that the devices are correctly monitored for connectivity and performance analysis. Devices are specific models of systems.

The certification process consists of three major parts:

  • Discovery of the device, including the device’s components (such as cards, ports) and endpoints (such as IP addresses, MAC addresses). 

  • Building of Layer 2 (data link) and Layer 3 (network) connectivity. 

  • Verification of operational status of the device and its components.

The VMware Smart Assurance IP Manager Certification Matrix available at VMware Online Support (https://docs.vmware.com) identifies the vendor-specific models that are supported by the IP Manager.

Certification Levels

 A device may have one of three certification levels: 

  • CERTIFIED: VMware has successfully tested a simulation of the device by using standard and proprietary MIBs that are supplied by the vendor. The IP Manager discovers the device by using standard MIB-II data and proprietary MIBs.

  • TEMPLATE: VMware Inc. that the device supports some standard and proprietary MIBs, but Dell has not tested the device. The IP Manager recognizes the object ID (OID), but has no information about the MIBs that this device supports.

  • GENERIC: VMware Inc. does not have the OID for the device. The IP Manager does not recognize the OID and responds by classifying the certification level of the device as GENERIC, adding the device to the Node class, and analyzing the device by using MIB-II data.

Note: A certification level named VALIDATED still appears in the oid2type configuration files but is no longer used. VALIDATED has essentially the same meaning as CERTIFIED.

#############################################################################################################################
##
# VERSION HISTORY
#
# Version | Published Date | Description
# 1.0     | May 2021  | First release of the document. Lists 11 simple certifications.
# 2.0     | June 2021 | Second release of the document. Lists 20 simple certifications.
#
#
# INSTRUCTIONS
#
# 1. Find the System Object ID (SysOID) of the device you intend to
# certify in the list of certified devices.
# 2. Copy the device certification code starting from the
# device SysOID till the next SysOID (including the braces).
# 3. Open the oid2type_Field.conf file using sm_edit and paste the
# contents at the end of the file. Then save and close the file.
# 4. If the SysOID is already certified and you are looking to apply an
# updated certification, use sm_edit to remove the old certification from the
# oid2type_/oid2type_misc/oid2type_Field.conf file.
# 5. To load new certifications into a domain, run the following command:
# /smarts/bin/sm_tpmgr -s  --reloadoid
# 6. Check IP domain log file for errors.
# 7. You can also see the exact certification used for a device in a running server by executing
# /smarts/bin/dmctl -s  get ICF_TopologyManager::ICF-TopologyManager| grep
#
# 8. The certifications in this file will be included in the next GA release.
# If you install a new GA release (hotfix patch, service pack, minor, or major release),
# remove the redundant or duplicate entry from the oid2type_Field.conf file.
#
# The conf files are located in:
# /smarts/conf/discovery and in the
# /smarts/local/conf/discovery directory.
# Use /smarts/bin/sm_edit to ensure that all modifications are
# stored under local and read in by the domain.
#
##
# The following simple certifications are supported on IP versions: IP 10.1.2.9
# Purpose: This file contains the list of certification code entries that
# can be added to the existing oid2type_Field.conf file to enable
# discovery and monitoring of the device.
##
##
#
#   SL No   TASC        SYSOID                                             VENDOR         MODEL
#
#    1     306285      .1.3.6.1.4.1.9.1.2963                               CISCO          ciscoC83002N2S4T2X
#    2     306286      .1.3.6.1.4.1.9.1.2897                               CISCO          ciscoCat100010GbpsStack
#    3     306138      .1.3.6.1.4.1.9.1.2669                               CISCO          ciscoC980080K9
#    4     306252      .1.3.6.1.4.1.25049.1.90                             OPENGEAR       ogACM700x
#    5     306240      .1.3.6.1.4.1.14823.1.1.52                           ARUBA          Aruba-mc-va
#    6     306145      .1.3.6.1.4.1.2620.1.6.123.1.72                      CHECKPOINT     CheckPoint5100
#    7     306289      .1.3.6.1.4.1.2636.1.1.1.4.138.1                     JUNIPER        NFX250ATTS1
#    8     306146      .1.3.6.1.4.1.30065.1.3011.7280.2727.2.60            ARISTA         DCS-7280CR2-60
#    9    306303      .1.3.6.1.4.1.2636.1.1.1.4.138.18                    JUNIPER        NFX350S2
#    10    306151      .1.3.6.1.4.1.2620.1.6.123.1.35                      CHECKPOINT     checkPoint4200
#    11    306282      .1.3.6.1.4.1.25506.1.2317                           H3C            S5130S-28PS-EI
#    12    306274      .1.3.6.1.4.1.9.1.1827                               CISCO          ciscoC365024TD
#    13    306264      .1.3.6.1.4.1.9.1.2166                               CISCO          ciscoC385024XU
#    14    306210      .1.3.6.1.4.1.2620.1.6.123.1.93                      CHECKPOINT     16600 HS
#    15    306184      .1.3.6.1.4.1.9.1.2368                               CISCO          ciscoIE40104S24P
#    16    306215      .1.3.6.1.4.1.30065.1.3011.7280.2727.2.972.30        Arista         DCS-7280CR2M-30
#    17    306238      .1.3.6.1.4.1.30065.1.2546.720.858.48.2600.6         Arista         CCS-720XP-48Y6
#    18    306181      .1.3.6.1.4.1.13336.2.2.1.1.1                        IBM            Cast Iron
#    19    306223      .1.3.6.1.4.1.30065.1.3011.7508.1359                 Arista         DCS-7508N
#    20    306162      .1.3.6.1.4.1.9.12.3.1.3.1509                        CISCO          cevChassisN9KC9396TX
#    21    306230      .1.3.6.1.4.1.9.1.2779                               CISCO          ciscoFpr4115K9
#    22    306254      .1.3.6.1.4.1.3375.2.1.3.4.91                        F5             BIG-IP-5250F
#    23    306235      .1.3.6.1.4.1.30065.1.3011.7050.3741.3.48.2878.8     Arista         DCS-7050SX3-48C8
#    24    306261      .1.3.6.1.4.1.9.1.1654                               CISCO          Catalyst 2960S-F48TS-S
#    25    306291      .1.3.6.1.4.1.9.12.3.1.3.1894                        CISCO          cevChassisDSC9132U
#    26    306262      .1.3.6.1.4.1.9.1.2511                               CISCO          ciscoC11114PWZ
#    27    306283      .1.3.6.1.4.1.1768.20                                Patton         3120
#    28    306209      .1.3.6.1.4.1.2636.1.1.1.4.82.22                     Juniper        jnxProductQFX512048Y8C
#    29    306156      .1.3.6.1.4.1.9.6.1.83.52.3                          CISCO          SG300-52MP
#    30    306237      .1.3.6.1.4.1.9.6.1.83.10.2                          CISCO          SG300-10P
#    31    306243      .1.3.6.1.4.1.9.1.2860                               CISCO          ciscoC9800LCK9
#
#
#New certifications available in the 1.0 version released in May 2021
#New certifications available in the 2.0 version released in June 2021
##

#Cisco Catalyst 8300 Series Edge Platforms    
.1.3.6.1.4.1.9.1.2963 {  
    TYPE            = Switch 
    VENDOR          = Cisco 
    MODEL           = ciscoC83002N2S4T2X  
    CERTIFICATION   = CERTIFIED
    CONT            = Cisco-Router 
    HEALTH          = Cisco-ASR9k-EntSensor
    VLAN            = Cisco-Membership 
    NEIGHBOR        = LLDP-CDP
                
INSTRUMENTATION:  
    Card-Fault                   = OldCiscoChassis  
    Environment                  = CiscoEntityFRU:DeviceID
    CPU/Memory                   = CiscoRouter:DeviceID  
    Interface-Fault              = MIB2  
    Interface-Performance        = MIB2  
    Port-Ethernet-Performance    = dot3_Ethernet  
    Port-Fault                   = MIB2  
    Port-Performance             = MIB2  
}

#Cisco ciscoCat100010GbpsStack Switch
.1.3.6.1.4.1.9.1.2897 {
    TYPE              = Switch
    VENDOR            = Cisco
    MODEL             = ciscoCat100010GbpsStack
    CERTIFICATION     = CERTIFIED
    CONT              = Cisco-Stack
    HEALTH            = Cisco-Stack
    VLAN              = Cisco-Membership
    NEIGHBOR          = LLDP-CDP

INSTRUMENTATION:
    Environment                 = CiscoStack
    Card-Fault                  = CiscoStack
    CPU/Memory                  = CiscoSwitch:DeviceID
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet
}

# cisco ciscoC980080K9
.1.3.6.1.4.1.9.1.2669 {
   TYPE                            = WirelessController
    VENDOR                         = Cisco
    MODEL                          = ciscoC980080K9
    CERTIFICATION                  = CERTIFIED
    CONT                           = Cisco-EntityRF-Switch
    HEALTH                         = Cisco-ASR9k-EntSensor
    WIFI                           = Cisco-Wireless
    BRIDGE                         = Cisco
    VLAN                           = Cisco-Membership
    NEIGHBOR                       = LLDP-CDP
    
 INSTRUMENTATION:
    Card-Fault                            = CiscoEntityFRU
    Environment                           = CiscoEntityFRU:DeviceID
    CPU/Memory                            = CiscoRouter:DeviceID
    Interface-Fault                       = MIB2
    Interface-Performance                 = CiscoRouter
    Interface-Ethernet-Performance        = CiscoRouter_Ethernet
    Port-Fault                            = MIB2
    Port-Performance                      = MIB2
    Port-Ethernet-Performance             = dot3_Ethernet
    WirelessAccessPoint-Fault             = Cisco_AireSpace_Wireless_MIB
    WirelessClient-Fault                  = Cisco_Lwapp
    WirelessController-Performance        = Cisco_Airespace_Switching
    AuthenticationServer-Fault            = Cisco_Airespace_Wireless_MIB
}

#OpenGear ACM700x
.1.3.6.1.4.1.25049.1.90 {
    TYPE            = TerminalServer
    VENDOR          = OpenGear
    MODEL           = ogACM700x
    CERTIFICATION   = CERTIFIED
    CONT            = Generic-MIB2
    HOSTRESRCS      = MIB2
    NEIGHBOR        = LLDP
    
INSTRUMENTATION:
    Interface-Fault         = MIB2
    Interface-Performance   = MIB2
    CPU/Memory              = HostResources:DeviceID
    Disk-Fault              = HostResources:DeviceID    
    FileSystem-Performance  = HostResources:DeviceID
}

# Aruba-mc-va
.1.3.6.1.4.1.14823.1.1.52 { 
    TYPE                                      = WirelessController
    VENDOR                                    = Aruba 
    MODEL                                     = Aruba-mc-va
    CERTIFICATION                             = CERTIFIED
    CONT                                      = Aruba-Switch
    WIFI                                      = Aruba-Wireless
    HEALTH                                    = ARUBA-Controller
    VLAN                                      = Aruba
 
INSTRUMENTATION: 
    Card-Fault                                = ArubaController:DeviceID
    CPU/Memory                                = ArubaController:DeviceID
    Environment                               = ArubaSysExt:DeviceID
    Interface-Fault                           = MIB2 
    Interface-Performance                     = MIB2 
    Port-Fault                                = MIB2 
    Port-Performance                          = MIB2
    WirelessAccessPoint-Fault                 = Aruba_WLSX_WLAN_MIB
    WirelessClient-Fault                      = Aruba_WLSX_WLAN_MIB
    WirelessController-Performance            = Aruba_WLSX_Switch
    AuthenticationServer-Fault                = Wlsx_Auth_MIB
    WirelessRadio-Performance                 = Aruba_WLSX_Radio_MIB
}

#CheckPoint 5100
.1.3.6.1.4.1.2620.1.6.123.1.72 {
    TYPE                           = Firewall
    VENDOR                         = CheckPoint
    MODEL                          = CheckPoint5100  
    CERTIFICATION                  = CERTIFIED
    CONT                           = Generic-MIB2
    HOSTRESRCS                     = MIB2-Checkpoint-Other
    HEALTH                         = Checkpoint-Firewall
    NEIGHBOR                       = LLDP
              
INSTRUMENTATION:
    Environment                     = Checkpoint_Firewall:DeviceID
    Disk-Fault                      = HostResources:DeviceID
    FileSystem-Performance          = HostResources:DeviceID
    CPU/Memory                      = Checkpoint:DeviceID
    Interface-Fault                 = MIB2
    Interface-Performance           = MIB2
}

# Juniper NFX250ATTS1
.1.3.6.1.4.1.2636.1.1.1.4.138.1 {
    TYPE             = Router
    VENDOR           = Juniper
    MODEL            = NFX250ATTS1
    CERTIFICATION    = CERTIFIED
    CONT             = Juniper-Chassis
    HEALTH           = Juniper-EX8208
    HOSTRESRCS       = Juniper-MIB2
    NEIGHBOR         = LLDP

INSTRUMENTATION:
    Environment             = JuniperEnvMon:DeviceID
    CPU/Memory              = JuniperRouter:DeviceID
    FileSystem-Performance  = HostResources:DeviceID
    Disk-Fault              = HostResources:DeviceID
    Card-Fault              = Juniper
    Interface-Fault         = MIB2
    Interface-Performance   = MIB2SNMP
}

#Arista DCS-7280CR2-60 Switch
.1.3.6.1.4.1.30065.1.3011.7280.2727.2.60 {
    TYPE                         = Switch
    VENDOR                       = Arista
    MODEL                        = DCS-7280CR2-60
    CERTIFICATION                = CERTIFIED
    CONT                         = Arista-Switch
    HOSTRESRCS                   = Arista-MIB2
    VLAN                         = AristaDot1q
    NEIGHBOR                     = LLDP
   
INSTRUMENTATION:
    Environment                  = EntityState:DeviceID
    Card-Fault                   = EntityState:DeviceID
    CPU/Memory                   = HostResources:DeviceID
    FileSystem-Performance       = HostResources:DeviceID
    Disk-Fault                   = HostResources:DeviceID
    Interface-Fault              = MIB2
    Interface-Performance        = MIB2
    Port-Fault                   = MIB2
    Port-Performance             = MIB2
    Port-Ethernet-Performance    = dot3_Ethernet
}

# Juniper NFX350S2
.1.3.6.1.4.1.2636.1.1.1.4.138.18 {
    TYPE              = Router
    VENDOR            = Juniper
    MODEL             = NFX350S2
    CERTIFICATION     = CERTIFIED
    CONT              = Juniper-Chassis
    HEALTH            = Juniper-EX8208
    HOSTRESRCS        = Juniper-MIB2
    NEIGHBOR          = LLDP

INSTRUMENTATION:
    Environment             = JuniperEnvMon:DeviceID
    CPU/Memory              = JuniperRouter:DeviceID
    FileSystem-Performance  = HostResources:DeviceID
    Disk-Fault              = HostResources:DeviceID
    Card-Fault              = Juniper
    Interface-Fault         = MIB2
    Interface-Performance   = MIB2SNMP
}

#CheckPoint  Firewall 4200
.1.3.6.1.4.1.2620.1.6.123.1.35 {
    TYPE                     = Firewall
    VENDOR                   = CheckPoint
    MODEL                    = checkPoint4200
    CERTIFICATION            = CERTIFIED
    CONT                     = Generic-MIB2
    HOSTRESRCS               = MIB2-Checkpoint-Other
    HEALTH                   = Checkpoint-Firewall
    NEIGHBOR                 = LLDP
    
INSTRUMENTATION:
    Environment                    = Checkpoint_Firewall:DeviceID
    Disk-Fault                     = HostResources:DeviceID
    FileSystem-Performance         = HostResources:DeviceID
    CPU/Memory                     = Checkpoint:DeviceID
    Interface-Fault                = MIB2
    Interface-Performance          = MIB2
}

#H3C S5130S-28PS-EI Switch
.1.3.6.1.4.1.25506.1.2317 {
    TYPE             = Switch
    VENDOR           = H3C
    MODEL            = S5130S-28PS-EI
    CERTIFICATION    = CERTIFIED
    CONT             = HP-H3C
    HEALTH           = HP-H3C
    VLAN             = Hp-vlan
    NEIGHBOR         = LLDP

INSTRUMENTATION:
    CPU/Memory                  = HPH3C:DeviceID
    Card-Fault                  = HPH3C:DeviceID
    Environment                 = HPH3C:DeviceID
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet
}

# Cisco C365024TD
.1.3.6.1.4.1.9.1.1827 {
    TYPE          = Switch
    VENDOR        = Cisco
    MODEL         = ciscoC365024TD
    CERTIFICATION = CERTIFIED
    CONT          = Cisco-EntityRF-Switch
    HEALTH        = Cisco-Router
    BRIDGE        = Cisco
    VLAN          = Cisco-Membership
    NEIGHBOR      = LLDP-CDP

INSTRUMENTATION:
    Environment                 = CiscoEnvMon:DeviceID
    CPU/Memory                  = CiscoRouter:DeviceID
    Card-Fault                  = Default
    Interface-Fault             = MIB2
    Interface-Performance       = CiscoRouter
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet 
}

# Cisco Catalyst 3850 24 X Switch
.1.3.6.1.4.1.9.1.2166 {
    TYPE          = Switch 
    VENDOR        = Cisco 
    MODEL         = ciscoC385024XU
    CERTIFICATION = CERTIFIED 
    CONT          = Cisco-Entity-IOS-Switch
    HEALTH        = Cisco-Router 
    VLAN          = Cisco-Membership 
    NEIGHBOR      = LLDP-CDP
        
INSTRUMENTATION: 
    CPU/Memory                = CiscoSwitch:DeviceID 
    Card-Fault                = CiscoEntityFRU:DeviceID 
    Environment               = CiscoEnvMon:DeviceID 
    Interface-Fault           = MIB2 
    Interface-Performance     = MIB2 
    Port-Fault                = MIB2 
    Port-Performance          = MIB2 
    Port-Ethernet-Performance = dot3_Ethernet 
}

#Checkpoint 16600 HS Firewall
.1.3.6.1.4.1.2620.1.6.123.1.93 {
    TYPE                       = Firewall
    VENDOR                     = CheckPoint
    MODEL                      = 16600 HS 
    CERTIFICATION              = CERTIFIED
    CONT                       = Generic-MIB2
    HOSTRESRCS                 = MIB2-Checkpoint-Other
    HEALTH                     = Checkpoint-Firewall
    NEIGHBOR                   = LLDP
              
INSTRUMENTATION:
    Environment                       = Checkpoint_Firewall:DeviceID
    Disk-Fault                        = HostResources:DeviceID
    FileSystem-Performance            = HostResources:DeviceID
    CPU/Memory                        = Checkpoint:DeviceID
    Interface-Fault                   = MIB2
    Interface-Performance             = MIB2
}

# IE40104S24P
.1.3.6.1.4.1.9.1.2368 {
    TYPE          = Switch
    VENDOR        = Cisco
    MODEL         = ciscoIE40104S24P
    CERTIFICATION = CERTIFIED
    CONT          = Cisco-Stack
    HEALTH        = Cisco-Stack
    BRIDGE        = Cisco
    VLAN          = Cisco-Membership
    NEIGHBOR      = Cisco-Stack

INSTRUMENTATION:
    Chassis-Performance         = CiscoStack
    Environment                 = CiscoStack
    Card-Fault                  = CiscoStack
    CPU/Memory                  = CiscoSwitch:DeviceID
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet
}

#Arista Networks DCS-7280CR2M-30
.1.3.6.1.4.1.30065.1.3011.7280.2727.2.972.30 {
    TYPE                         = Switch
    VENDOR                       = Arista
    MODEL                        = DCS-7280CR2M-30
    CERTIFICATION                = CERTIFIED
    CONT                         = Arista-Switch
    HOSTRESRCS                   = Arista-MIB2
    VLAN                         = AristaDot1q
    NEIGHBOR                     = LLDP
   
INSTRUMENTATION:
    Environment                     = EntityState:DeviceID
    Card-Fault                      = EntityState:DeviceID
    CPU/Memory                      = HostResources:DeviceID
    FileSystem-Performance          = HostResources:DeviceID
    Disk-Fault                      = HostResources:DeviceID
    Interface-Fault                 = MIB2
    Interface-Performance           = MIB2
    Port-Fault                      = MIB2
    Port-Performance                = MIB2
    Port-Ethernet-Performance       = dot3_Ethernet
}

#Arista Networks CCS-720XP-48Y6
.1.3.6.1.4.1.30065.1.2546.720.858.48.2600.6 {
    TYPE                            = Switch
    VENDOR                          = Arista
    MODEL                           = CCS-720XP-48Y6   
    CERTIFICATION                   = CERTIFIED
    CONT                            = Arista-Switch
    HOSTRESRCS                      = Arista-MIB2
    VLAN                            = AristaDot1q
    NEIGHBOR                        = LLDP
   
INSTRUMENTATION:
    Environment                     = EntityState:DeviceID
    Card-Fault                      = EntityState:DeviceID
    CPU/Memory                      = HostResources:DeviceID
    FileSystem-Performance          = HostResources:DeviceID
    Disk-Fault                      = HostResources:DeviceID
    Interface-Fault                 = MIB2
    Interface-Performance           = MIB2
    Port-Fault                      = MIB2
    Port-Performance                = MIB2
    Port-Ethernet-Performance       = dot3_Ethernet
}

#IBM Cast Iron Host
.1.3.6.1.4.1.13336.2.2.1.1.1 {
    TYPE             = Host
    VENDOR           = IBM
    MODEL            = Cast Iron
    CERTIFICATION    = CERTIFIED
    CONT             = Generic-MIB2 
    HOSTRESRCS       = MIB2
    NEIGHBOR         = LLDP
 
INSTRUMENTATION:
    Disk-Fault              = HostResources:DeviceID
    FileSystem-Performance  = HostResources:DeviceID
    CPU/Memory              = HostResources:DeviceID
    Interface-Fault         = MIB2
    Interface-Performance   = MIB2 
}

#Arista Networks DCS-7508N
.1.3.6.1.4.1.30065.1.3011.7508.1359 {
    TYPE                        = Switch
    VENDOR                      = Arista
    MODEL                       = DCS-7508N
    CERTIFICATION               = CERTIFIED
    CONT                        = Arista-Switch
    HOSTRESRCS                  = Arista-MIB2
    VLAN                        = AristaDot1q
    NEIGHBOR                    = LLDP
   
INSTRUMENTATION:
    Environment                     = EntityState:DeviceID
    Card-Fault                      = EntityState:DeviceID
    CPU/Memory                      = HostResources:DeviceID
    FileSystem-Performance          = HostResources:DeviceID
    Disk-Fault                      = HostResources:DeviceID
    Interface-Fault                 = MIB2
    Interface-Performance           = MIB2
    Port-Fault                      = MIB2
    Port-Performance                = MIB2
    Port-Ethernet-Performance       = dot3_Ethernet
}

# Cisco cevChassisN9KC9396TX Switch
.1.3.6.1.4.1.9.12.3.1.3.1509 {
    TYPE             = Switch
    VENDOR           = Cisco
    MODEL            = cevChassisN9KC9396TX
    CERTIFICATION    = CERTIFIED 
    CONT             = Cisco-Nexus-NON-CLI
    HEALTH           = Nexus-Entity-EntSensor
    VLAN             = Cisco-Membership
    NEIGHBOR         = LLDP-CDP

INSTRUMENTATION:
    Environment                 = CiscoEntityFRU:DeviceID
    Card-Fault                  = CiscoEntityRF:DeviceID
    CPU/Memory                  = CiscoNexus:DeviceID
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet
}

#Cisco Firepower 4115 Security Appliance
.1.3.6.1.4.1.9.1.2779 {
    TYPE                = Firewall
    VENDOR              = Cisco
    MODEL               = ciscoFpr4115K9
    CERTIFICATION       = CERTIFIED
    CONT                = Cisco-Router
    HEALTH              = Cisco-Router-CRS-EntSensor
    NEIGHBOR            = LLDP-CDP 

INSTRUMENTATION:
    Card-Fault                          = OldCiscoChassis
    Environment                         = CiscoEntityFRU:DeviceID
    CPU/Memory                          = CiscoRouter:DeviceID
    Interface-Fault                     = MIB2
    Interface-Performance               = CiscoRouter
    Interface-Ethernet-Performance      = CiscoRouter_Ethernet
}

#F5 Networks bigip5250F
.1.3.6.1.4.1.3375.2.1.3.4.91 { 
    TYPE                      = LoadBalancer 
    VENDOR                    = F5Networks 
    MODEL                     = BIG-IP-5250F
    CERTIFICATION             = CERTIFIED
    CONT                      = F5-BIGIP-Select 
    HEALTH                    = F5-LoadBalancer 
    HOSTRESRCS                = F5-MIB2 
    VLAN                      = F5-Vlan
    NEIGHBOR                  = LLDP

INSTRUMENTATION: 
    Environment                = F5LBEnvMon:DeviceID 
    CPU/Memory                 = F5Rsc 
    Disk-Fault                 = HostResources:DeviceID 
    FileSystem-Performance     = HostResources:DeviceID 
    Interface-Fault            = MIB2 
    Interface-Performance      = MIB2 
    Port-Fault                 = MIB2:PortKey
    Port-Performance           = MIB2:PortKey
}

#Arista Networks DCS-7050SX3-48C8
.1.3.6.1.4.1.30065.1.3011.7050.3741.3.48.2878.8 {
    TYPE                          = Switch
    VENDOR                        = Arista
    MODEL                         = DCS-7050SX3-48C8
    CERTIFICATION                 = CERTIFIED
    CONT                          = Arista-Switch
    HOSTRESRCS                    = Arista-MIB2
    VLAN                          = AristaDot1q
    NEIGHBOR                      = LLDP
   
INSTRUMENTATION:
    Environment                        = EntityState:DeviceID
    Card-Fault                         = EntityState:DeviceID
    CPU/Memory                         = HostResources:DeviceID
    FileSystem-Performance             = HostResources:DeviceID
    Disk-Fault                         = HostResources:DeviceID
    Interface-Fault                    = MIB2
    Interface-Performance              = MIB2
    Port-Fault                         = MIB2
    Port-Performance                   = MIB2
    Port-Ethernet-Performance          = dot3_Ethernet
}

# CISCO Catalyst 2960S-F48TS-S
.1.3.6.1.4.1.9.1.1654 { 
   TYPE          = Switch 
   VENDOR        = Cisco  
   MODEL         = Catalyst 2960S-F48TS-S 
   CERTIFICATION = CERTIFIED 
   CONT          = Cisco-Stack 
   NEIGHBOR      = Cisco-Stack
   VLAN          = Cisco-Membership   
   BRIDGE        = Cisco
   HEALTH        = Cisco-Stack

INSTRUMENTATION:   
   Chassis-Performance            = CiscoStack 
   Environment                    = CiscoStack    
   Card-Fault                     = CiscoStack  
   CPU/Memory                     = CiscoSwitch:DeviceID  
   Interface-Fault                = MIB2  
   Interface-Performance          = CiscoRouter
   Interface-Ethernet-Performance = CiscoRouter_Ethernet   
   Port-Fault                     = MIB2 
   Port-Performance               = MIB2  
   Port-Ethernet-Performance      = dot3_Ethernet
}

# Cisco cevChassisDSC9132U
.1.3.6.1.4.1.9.12.3.1.3.1894 {
    TYPE            = FibreChannelSwitch
    VENDOR          = Cisco
    MODEL           = cevChassisDSC9132U
    CERTIFICATION   = CERTIFIED 
    CONT            = Cisco-Nexus-NON-CLI
    HEALTH          = Nexus-Entity-EntSensor
    VLAN            = Cisco-Membership
    NEIGHBOR        = LLDP-CDP

INSTRUMENTATION:
    Environment              = CiscoEntityFRU:DeviceID
    Card-Fault               = CiscoEntityRF:DeviceID
    CPU/Memory               = CiscoNexus:DeviceID
    Interface-Fault          = MIB2
    Interface-Performance    = MIB2
    Port-Fault               = MIB2
    Port-Performance         = MIB2
}

# Cisco C11114PWZ Router
.1.3.6.1.4.1.9.1.2511 {
    TYPE             = Router
    VENDOR           = Cisco
    MODEL            = ciscoC11114PWZ
    CERTIFICATION    = CERTIFIED
    CONT             = Cisco-L3Switch
    HEALTH           = Cisco-Router-CRS-EntSensor
    VLAN             = Cisco-Membership
    NEIGHBOR         = LLDP-CDP
      
INSTRUMENTATION:
    Card-Fault                      = CiscoEntityFRU
    Environment                     = CiscoEntityFRU:DeviceID
    CPU/Memory                      = CiscoRouter:DeviceID
    Interface-Fault                 = MIB2
    Interface-Performance           = CiscoRouter
    Interface-Ethernet-Performance  = CiscoRouter_Ethernet
    Port-Fault                      = MIB2
    Port-Performance                = MIB2
    Port-Ethernet-Performance       = dot3_Ethernet
}

# Patton 3120 Remote Access Server
.1.3.6.1.4.1.1768.20 {
    TYPE             = Host
    VENDOR           = Patton
    MODEL            = 3120
    CERTIFICATION    = CERTIFIED
    CONT             = Generic-MIB2
    HOSTRESRCS       = MIB2
    NEIGHBOR         = LLDP
    
INSTRUMENTATION:
    CPU/Memory              = HostResources:DeviceID
    Disk-Fault              = HostResources:DeviceID
    FileSystem-Performance  = HostResources:DeviceID
    Interface-Fault         = MIB2
    Interface-Performance   = MIB2
}

# Juniper jnxProductQFX512048Y8C Switch
.1.3.6.1.4.1.2636.1.1.1.4.82.22 {
    TYPE             = Switch
    VENDOR           = Juniper
    MODEL            = jnxProductQFX512048Y8C
    CERTIFICATION    = CERTIFIED
    CONT             = Juniper-EX-Series
    HEALTH           = Juniper-EX8208
    HOSTRESRCS       = Juniper-MIB2
    VLAN             = Dot1q
    NEIGHBOR         = LLDP-ATM-Peer

 INSTRUMENTATION:
    Environment                 = JuniperEnvMon:DeviceID
    CPU/Memory                  = JuniperRouter:DeviceID
    FileSystem-Performance      = HostResources:DeviceID
    Disk-Fault                  = HostResources:DeviceID
    Card-Fault                  = Juniper
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2SNMP
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet
}

#Cisco SG300-52MP 52-port Gigabit Max-PoE Managed Switch
.1.3.6.1.4.1.9.6.1.83.52.3 {
    TYPE             = Switch
    VENDOR           = Cisco
    MODEL            = SG300-52MP 
    CERTIFICATION    = CERTIFIED
    CONT             = Generic-Switch
    HEALTH           = RadLan
    VLAN             = Dot1q
    NEIGHBOR         = LLDP-CDP
    
INSTRUMENTATION:
    Environment                 = RadLan:DeviceID
    CPU/Memory                  = RadLan
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet    
}

#Cisco SG300-10P 10-Port Gigabit PoE Managed Switch
.1.3.6.1.4.1.9.6.1.83.10.2 {
    TYPE             = Switch
    VENDOR           = Cisco
    MODEL            = SG300-10P 
    CERTIFICATION    = CERTIFIED
    CONT             = Generic-Switch
    HEALTH           = RadLan
    VLAN             = Dot1q
    NEIGHBOR         = LLDP-CDP
    
INSTRUMENTATION:
    Environment                 = RadLan:DeviceID
    CPU/Memory                  = RadLan
    Interface-Fault             = MIB2
    Interface-Performance       = MIB2
    Port-Fault                  = MIB2
    Port-Performance            = MIB2
    Port-Ethernet-Performance   = dot3_Ethernet    
}

# cisco ciscoC9800LCK9
.1.3.6.1.4.1.9.1.2860 {
    TYPE            = WirelessController
    VENDOR          = Cisco
    MODEL           = ciscoC9800LCK9
    CERTIFICATION   = CERTIFIED
    CONT            = Cisco-EntityRF-Switch
    HEALTH          = Cisco-ASR9k-EntSensor
    WIFI            = Cisco-Wireless
    BRIDGE          = Cisco
    VLAN            = Cisco-Membership
    NEIGHBOR        = LLDP-CDP
    
 INSTRUMENTATION:
    Card-Fault                          = CiscoEntityFRU
    Environment                         = CiscoEntityFRU:DeviceID
    CPU/Memory                          = CiscoRouter:DeviceID
    Interface-Fault                     = MIB2
    Interface-Performance               = CiscoRouter
    Interface-Ethernet-Performance      = CiscoRouter_Ethernet
    Port-Fault                          = MIB2
    Port-Performance                    = MIB2
    Port-Ethernet-Performance           = dot3_Ethernet
    WirelessAccessPoint-Fault           = Cisco_AireSpace_Wireless_MIB
    WirelessClient-Fault                = Cisco_Lwapp
    WirelessController-Performance      = Cisco_Airespace_Switching
    AuthenticationServer-Fault          = Cisco_Airespace_Wireless_MIB
}

 

check-circle-line exclamation-circle-line close-line
Scroll to top icon