-
Login to NCM Application server from which you want to backup database, and then set the VOYENCE_HOME environment variable.
For example, in Linux, execute the following command:
source /etc/voyence.conf
-
Stop the tomcat service running on the remote RA server.
-
Take the backup of database by using the backup.pl script under the <VOYENCE_HOME>/tools directory.
The script creates a “backup-image-.*.tgz” file under the VOYENCE_HOME>/data-image directory.
Note:If you have Smarts Adapter configured with SMARTS IP and SAM, the backup.pl script will also backup the Smarts Adapter data.
-
Copy the “backup-image-.*.tgz” file to a host where a new NCM Application server is installed. The backup file can be copied under any directory.
-
Login to the new NCM Application server setup, and then execute the following command:
source /etc/voyence.conf
-
Execute the following command from the <VOYENCE_HOME>/tools directory if you are restoring database across same NCM version:
perl restore.pl <Absolute path to backup image file /backup-image-.*.tgz>
-
Execute the following command from the <VOYENCE_HOME>/tools directory if you are restoring database on higher NCM version:
perl restore.pl <Absolute path to backup image file /backup-image-.*.tgz> --force
-
Update the InfraDB entry with Device server host names and IP addresses. To update the InfraDB entry, perform the following steps:
-
From the <VOYENCE_HOME>, execute the following command:
\cgi-bin\cflist.cgi > cflist.txt
-
Edit the cflist.txt to change all Device server FQDN and IP address to the new Device server FQDN and IP address.
For example, POP 1000 "<HOSTNAME>" NetList= RsrcList= DevList=1001,1002 EmsList= : ADDR="<IPADDRESS"
-
Execute the following command. It must return 'Status: 200 Success'.
\cgi-bin\cfwrite.cgi < cflist.txt
-
On the new Application server, go to the <VOYENCE_HOME>/bin directory, and then add all distributed Device servers to the lockbox using cstdriver utility:
-
cstdriver -lockbox <VOYENCE_HOME>/data/lockb.clb -passphrase <passphrase> -addHost <FQDN of Device server>
-
cstdriver -lockbox <VOYENCE_HOME>/data/lockb.clb -passphrase <passphrase> -addHost <FQDN>
-
Restart the vcmaster service in the Application server host.
-
Copy and replace the <VOYENCE_HOME>/data/lockb.clb file from Application server host to all Device server host under <VOYENCE_HOME>/data/lockb.clb.
-
Change the ownership of the lockb.clb file to root:cst using the command:
chown root:cst lockb.clb
-
Change the file permissions of the lockb.clb file to 640 using the command:
chmod 640 lockb.clb
-
Copy and replace the following from the old Device server to new Device server:
-
<VOYENCE_HOME>/data/devserver/configuration/ad_nextIdx
-
<VOYENCE_HOME>/data/devserver/configuration/ad_numIdxIHavefiles
-
-
-
Change the ownership of both the files to root:voyence using the commands:
chown root:voyence ad_nextIdx chown root:voyence ad_numIdxIHavefiles
-
Change the file permissions of both the files to 660 using the commands:
chmod 660 ad_nextIdx chmod 660 ad_numIdxIHavefiles
-
Restart the vcmaster service in all distributed Device server hosts.
-
Change the ownership of the lockb.clb file to root:cst using the command:
chown root:cst lockb.clb
-
Change the file permissions of the lockb.clb file to 640 using the command:
chmod 640 lockb.clb
-
To update all Device server FQDN in cm_device_server table in the database, do the following:
-
Login to NCM UI, and then navigate to Tools > System Administration > Global > Access > Device Servers.
-
Select each Device server, and then click Edit.
-
In the Edit Device Server window, click OK.
Or,
Run the following command from [Product directory]\db\controldb\bin:
psql.exe -h -d voyencedb -U pgdba -p 5435 -c "update cm_device_server set device_server_name='Device_Server_name';"
-
If you have Smarts Adapter configured in your previous NCM setup, follow these steps:
On Linux
-
Stop the NCM Smarts Adapter service.
service ncmsmartsadapter stop
-
Change the directory to $VOYENCE_HOME/NCMSmartsAdapter/.
-
Open and edit the prodDb.script file, so that VOYENCE_CONFIGURATION table is populated with actual AS host name, as follows:
-
Search for
INSERT INTO VOYENCE_CONFIGURATION VALUES (1,4,TRUE,'auth.conf','2','10000','linbgh125.lss.vmware.com','jUpFF0M5HQuOdJUqIYKo0w==','sysadmin')
-
Replace the old Application server host name with new Application server host name.
For example, replace 'linbgh125.lss.vmware.com' with '<new Application server host name>'.
-
Start the NCM Smarts Adapter service.
service ncmsmartsadapter start
-
Stop the NCM Smarts Adapter service.
sc stop VcSmarts (DOS command)
-
Change the directory to %VOYENCE_HOME%/NCMSmartsAdapter/.
-
Open and edit the prodDb.script file, so that VOYENCE_CONFIGURATION table is populated with actual AS host name, as follows:
-
Search for
INSERT INTO VOYENCE_CONFIGURATION VALUES (1,4,TRUE,'auth.conf','2','10000','linbgh125.lss.vmware.com','jUpFF0M5HQuOdJUqIYKo0w==','sysadmin')
-
Replace the old Application server host name with new Application server host name.
For example, replace 'linbgh125.lss.vmware.com' with '<new Application server host name>'.
-
Start the NCM Smarts Adapter service.
sc start VcSmarts (DOS command)