PIMsourceG and PIMStarG are base classes that deal with Multicast data flow.
Attributes for PIMSourceG and PIMStarG
Following table lists some key attributes for PIMSourceG and PIMStarG.
|IpMRouteLWMarkThreshold||Low watermark on octets or packets per second. A low utilization alarm will be generated only when traffic is higher than this number.||Integer|
|IpMRouteOctets||The number of octets contained in IP datagrams that were received from these sources, addressed to this multicast group.||Unsigned integer|
|IpMRouteOctetsMaxThreshold||The upper threshold of IP multicast packets per second. An alarm is generated when this rate is exceeded.||Unsigned integer|
|IpMRouteOctetsMinThreshold||The lower threshold of IP multicast packets per second. An alarm is generated when this rate is exceeded.||Unsigned integer|
|IpMRouteOctetsRate||The rate of Multicast byte flow||Floating integer|
|IpMRoutePacketsMaxThreshold||The upper threshold for IP multicast packets-per-second.||Unsigned integer|
|IpMRoutePacketsMinThreshold||The lower threshold for IP multicast packets-per-second.||Unsigned integer|
|IpMRoutePacketsRate||The flow rate for multicast packets.||Floating integer|
|IpMRoutePkts||The number of packets that this router has received from these sources and addressed to this multicast group address.||Unsigned integer|
|IpMRoutePruneFlag||When set to TRUE, indicates that this route is pruned.||Integer|
|PollingInterval||The interval at which SG attributes are polled.||Unsigned integer|
|UpstreamNeighborAddress||The IP address of the upstream Reverse Path Forwarding (RPF) neighbor.||String|