Bitnami Elasticsearch Stack

Elasticsearch is a distributed search and analytics engine. It is used for web search, log monitoring, and real-time analytics. Ideal for Big Data applications.

Overview of Elasticsearch

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Elasticsearch deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy Elasticsearch on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Change ElasticSearch version

To modify the ElasticSearch version used in this chart you can specify a valid image tag using the image.tag parameter. For example, image.tag=X.Y.Z. This approach is also applicable to other images like exporters.

Default kernel settings

Currently, Elasticsearch requires some changes in the kernel of the host machine to work as expected. If those values are not set in the underlying operating system, the ES containers fail to boot with ERROR messages. More information about these requirements can be found in the links below:

• File Descriptor requirements
• Virtual memory requirements

This chart uses a privileged initContainer to change those settings in the Kernel by running: sysctl -w vm.max_map_count=262144 && sysctl -w fs.file-max=65536. You can disable the initContainer using the sysctlImage.enabled=false parameter.

Enable bundled Kibana

This Elasticsearch chart contains Kibana as subchart, you can enable it just setting the global.kibanaEnabled=true parameter. To see the notes with some operational instructions from the Kibana chart, please use the --render-subchart-notes as part of your helm install command, in this way you can see the Kibana and ES notes in your terminal.

When enabling the bundled kibana subchart, there are a few gotchas that you should be aware of listed below.

Elasticsearch rest Encryption

When enabling elasticsearch’ rest endpoint encryption you will also need to set kibana.elasticsearch.security.tls.enabled to the SAME value along with some additional values shown below for an “out of the box experience”:

security:
  enabled: true
  # PASSWORD must be the same value passed to elasticsearch to get an "out of the box" experience
  elasticPassword: "<PASSWORD>"
  tls:
    # AutoGenerate TLS certs for elastic
    autoGenerated: true

kibana:
  elasticsearch:
    security:
      auth:
        enabled: true
        # default in the elasticsearch chart is elastic
        kibanaUsername: "<USERNAME>"
        kibanaPassword: "<PASSWORD>"
      tls:
        # Instruct kibana to connect to elastic over https
        enabled: true
        # Bit of a catch 22, as you will need to know the name upfront of your release
        existingSecret: RELEASENAME-elasticsearch-coordinating-crt # or just 'elasticsearch-coordinating-crt' if the release name happens to be 'elasticsearch'
        # As the certs are auto-generated, they are pemCerts so set to true
        usePemCerts: true

At a bare-minimum, when working with kibana and elasticsearch together the following values MUST be the same, otherwise things will fail:

security:
  tls:
    restEncryption: true

# assumes global.kibanaEnabled=true
kibana:
  elasticsearch:
    security:
      tls:
        enabled: true

How to deploy a single node

This chart allows you to deploy Elasticsearch as a “single-node” cluster (one master node replica) that assumes all the roles. The following inputs should be provided:

master:
  masterOnly: false
  replicaCount: 1
data:
  replicaCount: 0
coordinating:
  replicaCount: 0
ingest:
  replicaCount: 0

The “single-node” cluster will be configured with single-node discovery.

If you want to scale up to more replicas, make sure you refresh the configuration of the existing StatefulSet. For example, scale down to 0 replicas first to avoid inconsistencies in the configuration:

kubectl scale statefulset <DEPLOYMENT_NAME>-master --replicas=0
helm upgrade <DEPLOYMENT_NAME> oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch --reset-values --set master.masterOnly=false

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

Please note that the master nodes should continue assuming all the roles (master.masterOnly: false) since there is shard data on the first replica.

Adding extra environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property.

extraEnvVars:
  - name: ELASTICSEARCH_VERSION
    value: 7.0

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Using custom init scripts

For advanced operations, the Bitnami Elasticsearch charts allows using custom init scripts that will be mounted inside /docker-entrypoint.init-db. You can include the file directly in your values.yaml with initScripts, or use a ConfigMap or a Secret (in case of sensitive data) for mounting these extra scripts. In this case you use the initScriptsCM and initScriptsSecret values.

initScriptsCM=special-scripts
initScriptsSecret=special-scripts-sensitive

Snapshot and restore operations

As it’s described in the official documentation, it’s necessary to register a snapshot repository before you can perform snapshot and restore operations.

This chart allows you to configure Elasticsearch to use a shared file system to store snapshots. To do so, you need to mount a RWX volume on every Elasticsearch node, and set the parameter snapshotRepoPath with the path where the volume is mounted. In the example below, you can find the values to set when using a NFS Perstitent Volume:

extraVolumes:
  - name: snapshot-repository
    nfs:
      server: nfs.example.com # Please change this to your NFS server
      path: /share1
extraVolumeMounts:
  - name: snapshot-repository
    mountPath: /snapshots
snapshotRepoPath: "/snapshots"

Sidecars and Init Containers

If you have a need for additional containers to run within the same pod as Elasticsearch components (e.g. an additional metrics or logging exporter), you can do so via the XXX.sidecars parameter(s), where XXX is placeholder you need to replace with the actual component(s). Simply define your container according to the Kubernetes container spec.

sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Similarly, you can add extra init containers using the initContainers parameter.

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname

Setting Pod’s affinity

This chart allows you to set your custom affinity using the XXX.affinity parameter(s). Find more information about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami Elasticsearch image stores the Elasticsearch data at the /bitnami/elasticsearch/data path of the container.

By default, the chart mounts a Persistent Volume at this location. The volume is created using dynamic volume provisioning. See the Parameters section to configure the PVC.

Adjust permissions of persistent volume mountpoint

As the image run as non-root by default, it is necessary to adjust the ownership of the persistent volume so that the container can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volume. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volume before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""
global.elasticsearch.service.name	Elasticsearch service name to be used in the Kibana subchart (ignored if kibanaEnabled=false)	elasticsearch
global.elasticsearch.service.ports.restAPI	Elasticsearch service restAPI port to be used in the Kibana subchart (ignored if kibanaEnabled=false)	9200
global.kibanaEnabled	Whether or not to enable Kibana	false
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.fullname	""
fullnameOverride	String to fully override common.names.fullname	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
namespaceOverride	String to fully override common.names.namespace	""
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployment	["sleep"]
diagnosticMode.args	Args to override all containers in the deployment	["infinity"]

Elasticsearch cluster Parameters

Name	Description	Value
clusterName	Elasticsearch cluster name	elastic
containerPorts.restAPI	Elasticsearch REST API port	9200
containerPorts.transport	Elasticsearch Transport port	9300
plugins	Comma, semi-colon or space separated list of plugins to install at initialization	""
snapshotRepoPath	File System snapshot repository path	""
config	Override elasticsearch configuration	{}
extraConfig	Append extra configuration to the elasticsearch node configuration	{}
extraHosts	A list of external hosts which are part of this cluster	[]
extraVolumes	A list of volumes to be added to the pod	[]
extraVolumeMounts	A list of volume mounts to be added to the pod	[]
initScripts	Dictionary of init scripts. Evaluated as a template.	{}
initScriptsCM	ConfigMap with the init scripts. Evaluated as a template.	""
initScriptsSecret	Secret containing /docker-entrypoint-initdb.d scripts to be executed at initialization time that contain sensitive data. Evaluated as a template.	""
extraEnvVars	Array containing extra env vars to be added to all pods (evaluated as a template)	[]
extraEnvVarsCM	ConfigMap containing extra env vars to be added to all pods (evaluated as a template)	""
extraEnvVarsSecret	Secret containing extra env vars to be added to all pods (evaluated as a template)	""
sidecars	Add additional sidecar containers to the all elasticsearch node pod(s)	[]
initContainers	Add additional init containers to the all elasticsearch node pod(s)	[]
useIstioLabels	Use this variable to add Istio labels to all pods	true
image.registry	Elasticsearch image registry	REGISTRY_NAME
image.repository	Elasticsearch image repository	REPOSITORY_NAME/elasticsearch
image.digest	Elasticsearch image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	Elasticsearch image pull policy	IfNotPresent
image.pullSecrets	Elasticsearch image pull secrets	[]
image.debug	Enable Elasticsearch image debug mode	false
security.enabled	Enable X-Pack Security settings	false
security.elasticPassword	Password for ‘elastic’ user	""
security.existingSecret	Name of the existing secret containing the Elasticsearch password (expected key: elasticsearch-password)	""
security.fipsMode	Configure elasticsearch with FIPS 140 compliant mode	false
security.tls.restEncryption	Enable SSL/TLS encryption for Elasticsearch REST API.	true
security.tls.autoGenerated	Create self-signed TLS certificates.	false
security.tls.verificationMode	Verification mode for SSL communications.	full
security.tls.master.existingSecret	Existing secret containing the certificates for the master nodes	""
security.tls.data.existingSecret	Existing secret containing the certificates for the data nodes	""
security.tls.ingest.existingSecret	Existing secret containing the certificates for the ingest nodes	""
security.tls.coordinating.existingSecret	Existing secret containing the certificates for the coordinating nodes	""
security.tls.keystoreFilename	Name of the keystore file	elasticsearch.keystore.jks
security.tls.truststoreFilename	Name of the truststore	elasticsearch.truststore.jks
security.tls.usePemCerts	Use this variable if your secrets contain PEM certificates instead of JKS/PKCS12	false
security.tls.passwordsSecret	Existing secret containing the Keystore and Truststore passwords, or key password if PEM certs are used	""
security.tls.keystorePassword	Password to access the JKS/PKCS12 keystore or PEM key when they are password-protected.	""
security.tls.truststorePassword	Password to access the JKS/PKCS12 truststore when they are password-protected.	""
security.tls.keyPassword	Password to access the PEM key when they are password-protected.	""
security.tls.secretKeystoreKey	Name of the secret key containing the Keystore password	""
security.tls.secretTruststoreKey	Name of the secret key containing the Truststore password	""
security.tls.secretKey	Name of the secret key containing the PEM key password	""

Traffic Exposure Parameters

Name	Description	Value
service.type	Elasticsearch service type	ClusterIP
service.ports.restAPI	Elasticsearch service REST API port	9200
service.ports.transport	Elasticsearch service transport port	9300
service.nodePorts.restAPI	Node port for REST API	""
service.nodePorts.transport	Node port for REST API	""
service.clusterIP	Elasticsearch service Cluster IP	""
service.loadBalancerIP	Elasticsearch service Load Balancer IP	""
service.loadBalancerSourceRanges	Elasticsearch service Load Balancer sources	[]
service.externalTrafficPolicy	Elasticsearch service external traffic policy	Cluster
service.annotations	Additional custom annotations for Elasticsearch service	{}
service.extraPorts	Extra ports to expose in Elasticsearch service (normally used with the sidecars value)	[]
service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
ingress.enabled	Enable ingress record generation for Elasticsearch	false
ingress.pathType	Ingress path type	ImplementationSpecific
ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ingress.hostname	Default host for the ingress record	elasticsearch.local
ingress.path	Default path for the ingress record	/
ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
ingress.secrets	Custom TLS certificates as secrets	[]
ingress.extraRules	Additional rules to be covered with this ingress record	[]

Master-elegible nodes parameters

Name	Description	Value
master.masterOnly	Deploy the Elasticsearch master-elegible nodes as master-only nodes. Recommended for high-demand deployments.	true
master.replicaCount	Number of master-elegible replicas to deploy	2
master.extraRoles	Append extra roles to the node role	[]
master.pdb.create	Enable/disable a Pod Disruption Budget creation	true
master.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
master.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
master.nameOverride	String to partially override elasticsearch.master.fullname	""
master.fullnameOverride	String to fully override elasticsearch.master.fullname	""
master.servicenameOverride	String to fully override elasticsearch.master.servicename	""
master.annotations	Annotations for the master statefulset	{}
master.updateStrategy.type	Master-elegible nodes statefulset stategy type	RollingUpdate
master.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if master.resources is set (master.resources is recommended for production).	small
master.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
master.heapSize	Elasticsearch master-eligible node heap size.	128m
master.podSecurityContext.enabled	Enabled master-elegible pods’ Security Context	true
master.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
master.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
master.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
master.podSecurityContext.fsGroup	Set master-elegible pod’s Security Context fsGroup	1001
master.containerSecurityContext.enabled	Elasticseacrh master-eligible container securityContext	true
master.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
master.containerSecurityContext.runAsUser	User ID for the Elasticseacrh master-eligible container	1001
master.containerSecurityContext.runAsGroup	Group ID for the Elasticseacrh master-eligible container	1001
master.containerSecurityContext.runAsNonRoot	Set Elasticsearch master-eligible container’s Security Context runAsNonRoot	true
master.containerSecurityContext.privileged	Set Elasticsearch master-eligible container’s Security Context privileged	false
master.containerSecurityContext.allowPrivilegeEscalation	Set Elasticsearch master-eligible container’s Security Context allowPrivilegeEscalation	false
master.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
master.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
master.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
master.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
master.networkPolicy.allowExternal	Don’t require server label for connections	true
master.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
master.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
master.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
master.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
master.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
master.automountServiceAccountToken	Mount Service Account token in pod	false
master.hostAliases	master-elegible pods host aliases	[]
master.podLabels	Extra labels for master-elegible pods	{}
master.podAnnotations	Annotations for master-elegible pods	{}
master.podAffinityPreset	Pod affinity preset. Ignored if master.affinity is set. Allowed values: soft or hard	""
master.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if master.affinity is set. Allowed values: soft or hard	""
master.nodeAffinityPreset.type	Node affinity preset type. Ignored if master.affinity is set. Allowed values: soft or hard	""
master.nodeAffinityPreset.key	Node label key to match. Ignored if master.affinity is set	""
master.nodeAffinityPreset.values	Node label values to match. Ignored if master.affinity is set	[]
master.affinity	Affinity for master-elegible pods assignment	{}
master.nodeSelector	Node labels for master-elegible pods assignment	{}
master.tolerations	Tolerations for master-elegible pods assignment	[]
master.priorityClassName	master-elegible pods’ priorityClassName	""
master.schedulerName	Name of the k8s scheduler (other than default) for master-elegible pods	""
master.terminationGracePeriodSeconds	In seconds, time the given to the Elasticsearch Master pod needs to terminate gracefully	""
master.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
master.podManagementPolicy	podManagementPolicy to manage scaling operation of Elasticsearch master pods	Parallel
master.startupProbe.enabled	Enable/disable the startup probe (master nodes pod)	false
master.startupProbe.initialDelaySeconds	Delay before startup probe is initiated (master nodes pod)	90
master.startupProbe.periodSeconds	How often to perform the probe (master nodes pod)	10
master.startupProbe.timeoutSeconds	When the probe times out (master nodes pod)	5
master.startupProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (master nodes pod)	1
master.startupProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
master.livenessProbe.enabled	Enable/disable the liveness probe (master-eligible nodes pod)	true
master.livenessProbe.initialDelaySeconds	Delay before liveness probe is initiated (master-eligible nodes pod)	180
master.livenessProbe.periodSeconds	How often to perform the probe (master-eligible nodes pod)	10
master.livenessProbe.timeoutSeconds	When the probe times out (master-eligible nodes pod)	5
master.livenessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (master-eligible nodes pod)	1
master.livenessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
master.readinessProbe.enabled	Enable/disable the readiness probe (master-eligible nodes pod)	true
master.readinessProbe.initialDelaySeconds	Delay before readiness probe is initiated (master-eligible nodes pod)	90
master.readinessProbe.periodSeconds	How often to perform the probe (master-eligible nodes pod)	10
master.readinessProbe.timeoutSeconds	When the probe times out (master-eligible nodes pod)	5
master.readinessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (master-eligible nodes pod)	1
master.readinessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
master.customStartupProbe	Override default startup probe	{}
master.customLivenessProbe	Override default liveness probe	{}
master.customReadinessProbe	Override default readiness probe	{}
master.command	Override default container command (useful when using custom images)	[]
master.args	Override default container args (useful when using custom images)	[]
master.lifecycleHooks	for the master-elegible container(s) to automate configuration before or after startup	{}
master.extraEnvVars	Array with extra environment variables to add to master-elegible nodes	[]
master.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for master-elegible nodes	""
master.extraEnvVarsSecret	Name of existing Secret containing extra env vars for master-elegible nodes	""
master.extraVolumes	Optionally specify extra list of additional volumes for the master-elegible pod(s)	[]
master.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the master-elegible container(s)	[]
master.sidecars	Add additional sidecar containers to the master-elegible pod(s)	[]
master.initContainers	Add additional init containers to the master-elegible pod(s)	[]
master.persistence.enabled	Enable persistence using a PersistentVolumeClaim	true
master.persistence.storageClass	Persistent Volume Storage Class	""
master.persistence.existingClaim	Existing Persistent Volume Claim	""
master.persistence.existingVolume	Existing Persistent Volume for use as volume match label selector to the volumeClaimTemplate. Ignored when master.persistence.selector is set.	""
master.persistence.selector	Configure custom selector for existing Persistent Volume. Overwrites master.persistence.existingVolume	{}
master.persistence.annotations	Persistent Volume Claim annotations	{}
master.persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
master.persistence.size	Persistent Volume Size	8Gi
master.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
master.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
master.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
master.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}
master.autoscaling.enabled	Whether enable horizontal pod autoscale	false
master.autoscaling.minReplicas	Configure a minimum amount of pods	3
master.autoscaling.maxReplicas	Configure a maximum amount of pods	11
master.autoscaling.targetCPU	Define the CPU target to trigger the scaling actions (utilization percentage)	""
master.autoscaling.targetMemory	Define the memory target to trigger the scaling actions (utilization percentage)	""

Data-only nodes parameters

Name	Description	Value
data.replicaCount	Number of data-only replicas to deploy	2
data.extraRoles	Append extra roles to the node role	[]
data.pdb.create	Enable/disable a Pod Disruption Budget creation	true
data.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
data.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
data.nameOverride	String to partially override elasticsearch.data.fullname	""
data.fullnameOverride	String to fully override elasticsearch.data.fullname	""
data.servicenameOverride	String to fully override elasticsearch.data.servicename	""
data.annotations	Annotations for the data statefulset	{}
data.updateStrategy.type	Data-only nodes statefulset stategy type	RollingUpdate
data.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if data.resources is set (data.resources is recommended for production).	medium
data.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
data.heapSize	Elasticsearch data node heap size.	1024m
data.podSecurityContext.enabled	Enabled data pods’ Security Context	true
data.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
data.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
data.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
data.podSecurityContext.fsGroup	Set data pod’s Security Context fsGroup	1001
data.containerSecurityContext.enabled	Elasticseacrh data container securityContext	true
data.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
data.containerSecurityContext.runAsUser	User ID for the Elasticseacrh data container	1001
data.containerSecurityContext.runAsGroup	Group ID for the Elasticseacrh data container	1001
data.containerSecurityContext.runAsNonRoot	Set Elasticsearch data container’s Security Context runAsNonRoot	true
data.containerSecurityContext.privileged	Set Elasticsearch data container’s Security Context privileged	false
data.containerSecurityContext.allowPrivilegeEscalation	Set Elasticsearch data container’s Security Context allowPrivilegeEscalation	false
data.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
data.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
data.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
data.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
data.networkPolicy.allowExternal	Don’t require server label for connections	true
data.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
data.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
data.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
data.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
data.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
data.automountServiceAccountToken	Mount Service Account token in pod	false
data.hostAliases	data pods host aliases	[]
data.podLabels	Extra labels for data pods	{}
data.podAnnotations	Annotations for data pods	{}
data.podAffinityPreset	Pod affinity preset. Ignored if data.affinity is set. Allowed values: soft or hard	""
data.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data.affinity is set. Allowed values: soft or hard	""
data.nodeAffinityPreset.type	Node affinity preset type. Ignored if data.affinity is set. Allowed values: soft or hard	""
data.nodeAffinityPreset.key	Node label key to match. Ignored if data.affinity is set	""
data.nodeAffinityPreset.values	Node label values to match. Ignored if data.affinity is set	[]
data.affinity	Affinity for data pods assignment	{}
data.nodeSelector	Node labels for data pods assignment	{}
data.tolerations	Tolerations for data pods assignment	[]
data.priorityClassName	data pods’ priorityClassName	""
data.schedulerName	Name of the k8s scheduler (other than default) for data pods	""
data.terminationGracePeriodSeconds	In seconds, time the given to the Elasticsearch data pod needs to terminate gracefully	""
data.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
data.podManagementPolicy	podManagementPolicy to manage scaling operation of Elasticsearch data pods	Parallel
data.startupProbe.enabled	Enable/disable the startup probe (data nodes pod)	false
data.startupProbe.initialDelaySeconds	Delay before startup probe is initiated (data nodes pod)	90
data.startupProbe.periodSeconds	How often to perform the probe (data nodes pod)	10
data.startupProbe.timeoutSeconds	When the probe times out (data nodes pod)	5
data.startupProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (data nodes pod)	1
data.startupProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
data.livenessProbe.enabled	Enable/disable the liveness probe (data nodes pod)	true
data.livenessProbe.initialDelaySeconds	Delay before liveness probe is initiated (data nodes pod)	180
data.livenessProbe.periodSeconds	How often to perform the probe (data nodes pod)	10
data.livenessProbe.timeoutSeconds	When the probe times out (data nodes pod)	5
data.livenessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (data nodes pod)	1
data.livenessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
data.readinessProbe.enabled	Enable/disable the readiness probe (data nodes pod)	true
data.readinessProbe.initialDelaySeconds	Delay before readiness probe is initiated (data nodes pod)	90
data.readinessProbe.periodSeconds	How often to perform the probe (data nodes pod)	10
data.readinessProbe.timeoutSeconds	When the probe times out (data nodes pod)	5
data.readinessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (data nodes pod)	1
data.readinessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
data.customStartupProbe	Override default startup probe	{}
data.customLivenessProbe	Override default liveness probe	{}
data.customReadinessProbe	Override default readiness probe	{}
data.command	Override default container command (useful when using custom images)	[]
data.args	Override default container args (useful when using custom images)	[]
data.lifecycleHooks	for the data container(s) to automate configuration before or after startup	{}
data.extraEnvVars	Array with extra environment variables to add to data nodes	[]
data.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data nodes	""
data.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data nodes	""
data.extraVolumes	Optionally specify extra list of additional volumes for the data pod(s)	[]
data.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the data container(s)	[]
data.sidecars	Add additional sidecar containers to the data pod(s)	[]
data.initContainers	Add additional init containers to the data pod(s)	[]
data.persistence.enabled	Enable persistence using a PersistentVolumeClaim	true
data.persistence.storageClass	Persistent Volume Storage Class	""
data.persistence.existingClaim	Existing Persistent Volume Claim	""
data.persistence.existingVolume	Existing Persistent Volume for use as volume match label selector to the volumeClaimTemplate. Ignored when data.persistence.selector is set.	""
data.persistence.selector	Configure custom selector for existing Persistent Volume. Overwrites data.persistence.existingVolume	{}
data.persistence.annotations	Persistent Volume Claim annotations	{}
data.persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
data.persistence.size	Persistent Volume Size	8Gi
data.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
data.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
data.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
data.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}
data.autoscaling.enabled	Whether enable horizontal pod autoscale	false
data.autoscaling.minReplicas	Configure a minimum amount of pods	3
data.autoscaling.maxReplicas	Configure a maximum amount of pods	11
data.autoscaling.targetCPU	Define the CPU target to trigger the scaling actions (utilization percentage)	""
data.autoscaling.targetMemory	Define the memory target to trigger the scaling actions (utilization percentage)	""

Coordinating-only nodes parameters

Name	Description	Value
coordinating.replicaCount	Number of coordinating-only replicas to deploy	2
coordinating.extraRoles	Append extra roles to the node role	[]
coordinating.pdb.create	Enable/disable a Pod Disruption Budget creation	true
coordinating.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
coordinating.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
coordinating.nameOverride	String to partially override elasticsearch.coordinating.fullname	""
coordinating.fullnameOverride	String to fully override elasticsearch.coordinating.fullname	""
coordinating.servicenameOverride	String to fully override elasticsearch.coordinating.servicename	""
coordinating.annotations	Annotations for the coordinating-only statefulset	{}
coordinating.updateStrategy.type	Coordinating-only nodes statefulset stategy type	RollingUpdate
coordinating.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if coordinating.resources is set (coordinating.resources is recommended for production).	small
coordinating.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
coordinating.heapSize	Elasticsearch coordinating node heap size.	128m
coordinating.podSecurityContext.enabled	Enabled coordinating-only pods’ Security Context	true
coordinating.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
coordinating.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
coordinating.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
coordinating.podSecurityContext.fsGroup	Set coordinating-only pod’s Security Context fsGroup	1001
coordinating.containerSecurityContext.enabled	Elasticseacrh coordinating container securityContext	true
coordinating.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
coordinating.containerSecurityContext.runAsUser	User ID for the Elasticseacrh coordinating container	1001
coordinating.containerSecurityContext.runAsGroup	Group ID for the Elasticseacrh coordinating container	1001
coordinating.containerSecurityContext.runAsNonRoot	Set Elasticsearch coordinating container’s Security Context runAsNonRoot	true
coordinating.containerSecurityContext.privileged	Set Elasticsearch coordinating container’s Security Context privileged	false
coordinating.containerSecurityContext.allowPrivilegeEscalation	Set Elasticsearch coordinating container’s Security Context allowPrivilegeEscalation	false
coordinating.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
coordinating.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
coordinating.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
coordinating.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
coordinating.networkPolicy.allowExternal	Don’t require server label for connections	true
coordinating.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
coordinating.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
coordinating.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
coordinating.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
coordinating.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
coordinating.automountServiceAccountToken	Mount Service Account token in pod	false
coordinating.hostAliases	coordinating-only pods host aliases	[]
coordinating.podLabels	Extra labels for coordinating-only pods	{}
coordinating.podAnnotations	Annotations for coordinating-only pods	{}
coordinating.podAffinityPreset	Pod affinity preset. Ignored if coordinating.affinity is set. Allowed values: soft or hard	""
coordinating.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if coordinating.affinity is set. Allowed values: soft or hard	""
coordinating.nodeAffinityPreset.type	Node affinity preset type. Ignored if coordinating.affinity is set. Allowed values: soft or hard	""
coordinating.nodeAffinityPreset.key	Node label key to match. Ignored if coordinating.affinity is set	""
coordinating.nodeAffinityPreset.values	Node label values to match. Ignored if coordinating.affinity is set	[]
coordinating.affinity	Affinity for coordinating-only pods assignment	{}
coordinating.nodeSelector	Node labels for coordinating-only pods assignment	{}
coordinating.tolerations	Tolerations for coordinating-only pods assignment	[]
coordinating.priorityClassName	coordinating-only pods’ priorityClassName	""
coordinating.schedulerName	Name of the k8s scheduler (other than default) for coordinating-only pods	""
coordinating.terminationGracePeriodSeconds	In seconds, time the given to the Elasticsearch coordinating pod needs to terminate gracefully	""
coordinating.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
coordinating.podManagementPolicy	podManagementPolicy to manage scaling operation of Elasticsearch coordinating pods	Parallel
coordinating.startupProbe.enabled	Enable/disable the startup probe (coordinating-only nodes pod)	false
coordinating.startupProbe.initialDelaySeconds	Delay before startup probe is initiated (coordinating-only nodes pod)	90
coordinating.startupProbe.periodSeconds	How often to perform the probe (coordinating-only nodes pod)	10
coordinating.startupProbe.timeoutSeconds	When the probe times out (coordinating-only nodes pod)	5
coordinating.startupProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (coordinating-only nodes pod)	1
coordinating.startupProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
coordinating.livenessProbe.enabled	Enable/disable the liveness probe (coordinating-only nodes pod)	true
coordinating.livenessProbe.initialDelaySeconds	Delay before liveness probe is initiated (coordinating-only nodes pod)	180
coordinating.livenessProbe.periodSeconds	How often to perform the probe (coordinating-only nodes pod)	10
coordinating.livenessProbe.timeoutSeconds	When the probe times out (coordinating-only nodes pod)	5
coordinating.livenessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (coordinating-only nodes pod)	1
coordinating.livenessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
coordinating.readinessProbe.enabled	Enable/disable the readiness probe (coordinating-only nodes pod)	true
coordinating.readinessProbe.initialDelaySeconds	Delay before readiness probe is initiated (coordinating-only nodes pod)	90
coordinating.readinessProbe.periodSeconds	How often to perform the probe (coordinating-only nodes pod)	10
coordinating.readinessProbe.timeoutSeconds	When the probe times out (coordinating-only nodes pod)	5
coordinating.readinessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (coordinating-only nodes pod)	1
coordinating.readinessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
coordinating.customStartupProbe	Override default startup probe	{}
coordinating.customLivenessProbe	Override default liveness probe	{}
coordinating.customReadinessProbe	Override default readiness probe	{}
coordinating.command	Override default container command (useful when using custom images)	[]
coordinating.args	Override default container args (useful when using custom images)	[]
coordinating.lifecycleHooks	for the coordinating-only container(s) to automate configuration before or after startup	{}
coordinating.extraEnvVars	Array with extra environment variables to add to coordinating-only nodes	[]
coordinating.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for coordinating-only nodes	""
coordinating.extraEnvVarsSecret	Name of existing Secret containing extra env vars for coordinating-only nodes	""
coordinating.extraVolumes	Optionally specify extra list of additional volumes for the coordinating-only pod(s)	[]
coordinating.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the coordinating-only container(s)	[]
coordinating.sidecars	Add additional sidecar containers to the coordinating-only pod(s)	[]
coordinating.initContainers	Add additional init containers to the coordinating-only pod(s)	[]
coordinating.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
coordinating.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
coordinating.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
coordinating.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}
coordinating.autoscaling.enabled	Whether enable horizontal pod autoscale	false
coordinating.autoscaling.minReplicas	Configure a minimum amount of pods	3
coordinating.autoscaling.maxReplicas	Configure a maximum amount of pods	11
coordinating.autoscaling.targetCPU	Define the CPU target to trigger the scaling actions (utilization percentage)	""
coordinating.autoscaling.targetMemory	Define the memory target to trigger the scaling actions (utilization percentage)	""

Ingest-only nodes parameters

Name	Description	Value
ingest.enabled	Enable ingest nodes	true
ingest.replicaCount	Number of ingest-only replicas to deploy	2
ingest.extraRoles	Append extra roles to the node role	[]
ingest.pdb.create	Enable/disable a Pod Disruption Budget creation	true
ingest.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
ingest.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
ingest.nameOverride	String to partially override elasticsearch.ingest.fullname	""
ingest.fullnameOverride	String to fully override elasticsearch.ingest.fullname	""
ingest.servicenameOverride	String to fully override ingest.master.servicename	""
ingest.annotations	Annotations for the ingest statefulset	{}
ingest.containerPorts.restAPI	Elasticsearch REST API port	9200
ingest.containerPorts.transport	Elasticsearch Transport port	9300
ingest.updateStrategy.type	Ingest-only nodes statefulset stategy type	RollingUpdate
ingest.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if ingest.resources is set (ingest.resources is recommended for production).	small
ingest.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
ingest.heapSize	Elasticsearch ingest-only node heap size.	128m
ingest.podSecurityContext.enabled	Enabled ingest-only pods’ Security Context	true
ingest.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
ingest.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
ingest.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
ingest.podSecurityContext.fsGroup	Set ingest-only pod’s Security Context fsGroup	1001
ingest.containerSecurityContext.enabled	Elasticseacrh ingest container securityContext	true
ingest.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
ingest.containerSecurityContext.runAsUser	User ID for the Elasticseacrh ingest container	1001
ingest.containerSecurityContext.runAsGroup	Group ID for the Elasticseacrh ingest container	1001
ingest.containerSecurityContext.runAsNonRoot	Set Elasticsearch ingest container’s Security Context runAsNonRoot	true
ingest.containerSecurityContext.privileged	Set Elasticsearch ingest container’s Security Context privileged	false
ingest.containerSecurityContext.allowPrivilegeEscalation	Set Elasticsearch ingest container’s Security Context allowPrivilegeEscalation	false
ingest.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
ingest.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
ingest.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
ingest.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
ingest.networkPolicy.allowExternal	Don’t require server label for connections	true
ingest.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
ingest.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
ingest.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
ingest.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
ingest.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
ingest.automountServiceAccountToken	Mount Service Account token in pod	false
ingest.hostAliases	ingest-only pods host aliases	[]
ingest.podLabels	Extra labels for ingest-only pods	{}
ingest.podAnnotations	Annotations for ingest-only pods	{}
ingest.podAffinityPreset	Pod affinity preset. Ignored if ingest.affinity is set. Allowed values: soft or hard	""
ingest.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if ingest.affinity is set. Allowed values: soft or hard	""
ingest.nodeAffinityPreset.type	Node affinity preset type. Ignored if ingest.affinity is set. Allowed values: soft or hard	""
ingest.nodeAffinityPreset.key	Node label key to match. Ignored if ingest.affinity is set	""
ingest.nodeAffinityPreset.values	Node label values to match. Ignored if ingest.affinity is set	[]
ingest.affinity	Affinity for ingest-only pods assignment	{}
ingest.nodeSelector	Node labels for ingest-only pods assignment	{}
ingest.tolerations	Tolerations for ingest-only pods assignment	[]
ingest.priorityClassName	ingest-only pods’ priorityClassName	""
ingest.schedulerName	Name of the k8s scheduler (other than default) for ingest-only pods	""
ingest.terminationGracePeriodSeconds	In seconds, time the given to the Elasticsearch ingest pod needs to terminate gracefully	""
ingest.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
ingest.podManagementPolicy	podManagementPolicy to manage scaling operation of Elasticsearch ingest pods	Parallel
ingest.startupProbe.enabled	Enable/disable the startup probe (ingest-only nodes pod)	false
ingest.startupProbe.initialDelaySeconds	Delay before startup probe is initiated (ingest-only nodes pod)	90
ingest.startupProbe.periodSeconds	How often to perform the probe (ingest-only nodes pod)	10
ingest.startupProbe.timeoutSeconds	When the probe times out (ingest-only nodes pod)	5
ingest.startupProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (ingest-only nodes pod)	1
ingest.startupProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
ingest.livenessProbe.enabled	Enable/disable the liveness probe (ingest-only nodes pod)	true
ingest.livenessProbe.initialDelaySeconds	Delay before liveness probe is initiated (ingest-only nodes pod)	180
ingest.livenessProbe.periodSeconds	How often to perform the probe (ingest-only nodes pod)	10
ingest.livenessProbe.timeoutSeconds	When the probe times out (ingest-only nodes pod)	5
ingest.livenessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (ingest-only nodes pod)	1
ingest.livenessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
ingest.readinessProbe.enabled	Enable/disable the readiness probe (ingest-only nodes pod)	true
ingest.readinessProbe.initialDelaySeconds	Delay before readiness probe is initiated (ingest-only nodes pod)	90
ingest.readinessProbe.periodSeconds	How often to perform the probe (ingest-only nodes pod)	10
ingest.readinessProbe.timeoutSeconds	When the probe times out (ingest-only nodes pod)	5
ingest.readinessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (ingest-only nodes pod)	1
ingest.readinessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
ingest.customStartupProbe	Override default startup probe	{}
ingest.customLivenessProbe	Override default liveness probe	{}
ingest.customReadinessProbe	Override default readiness probe	{}
ingest.command	Override default container command (useful when using custom images)	[]
ingest.args	Override default container args (useful when using custom images)	[]
ingest.lifecycleHooks	for the ingest-only container(s) to automate configuration before or after startup	{}
ingest.extraEnvVars	Array with extra environment variables to add to ingest-only nodes	[]
ingest.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for ingest-only nodes	""
ingest.extraEnvVarsSecret	Name of existing Secret containing extra env vars for ingest-only nodes	""
ingest.extraVolumes	Optionally specify extra list of additional volumes for the ingest-only pod(s)	[]
ingest.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the ingest-only container(s)	[]
ingest.sidecars	Add additional sidecar containers to the ingest-only pod(s)	[]
ingest.initContainers	Add additional init containers to the ingest-only pod(s)	[]
ingest.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
ingest.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
ingest.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
ingest.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}
ingest.autoscaling.enabled	Whether enable horizontal pod autoscale	false
ingest.autoscaling.minReplicas	Configure a minimum amount of pods	3
ingest.autoscaling.maxReplicas	Configure a maximum amount of pods	11
ingest.autoscaling.targetCPU	Define the CPU target to trigger the scaling actions (utilization percentage)	""
ingest.autoscaling.targetMemory	Define the memory target to trigger the scaling actions (utilization percentage)	""
ingest.service.enabled	Enable Ingest-only service	false
ingest.service.type	Elasticsearch ingest-only service type	ClusterIP
ingest.service.ports.restAPI	Elasticsearch service REST API port	9200
ingest.service.ports.transport	Elasticsearch service transport port	9300
ingest.service.nodePorts.restAPI	Node port for REST API	""
ingest.service.nodePorts.transport	Node port for REST API	""
ingest.service.clusterIP	Elasticsearch ingest-only service Cluster IP	""
ingest.service.loadBalancerIP	Elasticsearch ingest-only service Load Balancer IP	""
ingest.service.loadBalancerSourceRanges	Elasticsearch ingest-only service Load Balancer sources	[]
ingest.service.externalTrafficPolicy	Elasticsearch ingest-only service external traffic policy	Cluster
ingest.service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
ingest.service.annotations	Additional custom annotations for Elasticsearch ingest-only service	{}
ingest.service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
ingest.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
ingest.ingress.enabled	Enable ingress record generation for Elasticsearch	false
ingest.ingress.pathType	Ingress path type	ImplementationSpecific
ingest.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ingest.ingress.hostname	Default host for the ingress record	elasticsearch-ingest.local
ingest.ingress.path	Default path for the ingress record	/
ingest.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ingest.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
ingest.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
ingest.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
ingest.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
ingest.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
ingest.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
ingest.ingress.secrets	Custom TLS certificates as secrets	[]
ingest.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Metrics parameters

Name	Description	Value
metrics.enabled	Enable prometheus exporter	false
metrics.nameOverride	Metrics pod name	""
metrics.fullnameOverride	String to fully override common.names.fullname	""
metrics.image.registry	Metrics exporter image registry	REGISTRY_NAME
metrics.image.repository	Metrics exporter image repository	REPOSITORY_NAME/elasticsearch-exporter
metrics.image.digest	Metrics exporter image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
metrics.image.pullPolicy	Metrics exporter image pull policy	IfNotPresent
metrics.image.pullSecrets	Metrics exporter image pull secrets	[]
metrics.annotations	Annotations for metrics	{}
metrics.extraArgs	Extra arguments to add to the default exporter command	[]
metrics.automountServiceAccountToken	Mount Service Account token in pod	false
metrics.hostAliases	Add deployment host aliases	[]
metrics.schedulerName	Name of the k8s scheduler (other than default)	""
metrics.priorityClassName	Elasticsearch metrics exporter pods’ priorityClassName	""
metrics.containerPorts.http	Metrics HTTP port	9114
metrics.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
metrics.networkPolicy.allowExternal	Don’t require server label for connections	true
metrics.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
metrics.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
metrics.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
metrics.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
metrics.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
metrics.service.type	Metrics exporter endpoint service type	ClusterIP
metrics.service.port	Metrics exporter endpoint service port	9114
metrics.service.annotations	Provide any additional annotations which may be required.	{}
metrics.podAffinityPreset	Metrics Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
metrics.podAntiAffinityPreset	Metrics Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
metrics.nodeAffinityPreset.type	Metrics Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
metrics.nodeAffinityPreset.key	Metrics Node label key to match Ignored if affinity is set.	""
metrics.nodeAffinityPreset.values	Metrics Node label values to match. Ignored if affinity is set.	[]
metrics.affinity	Metrics Affinity for pod assignment	{}
metrics.nodeSelector	Metrics Node labels for pod assignment	{}
metrics.tolerations	Metrics Tolerations for pod assignment	[]
metrics.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
metrics.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).	nano
metrics.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
metrics.livenessProbe.enabled	Enable/disable the liveness probe (metrics pod)	true
metrics.livenessProbe.initialDelaySeconds	Delay before liveness probe is initiated (metrics pod)	60
metrics.livenessProbe.periodSeconds	How often to perform the probe (metrics pod)	10
metrics.livenessProbe.timeoutSeconds	When the probe times out (metrics pod)	5
metrics.livenessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
metrics.livenessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (metrics pod)	1
metrics.readinessProbe.enabled	Enable/disable the readiness probe (metrics pod)	true
metrics.readinessProbe.initialDelaySeconds	Delay before readiness probe is initiated (metrics pod)	5
metrics.readinessProbe.periodSeconds	How often to perform the probe (metrics pod)	10
metrics.readinessProbe.timeoutSeconds	When the probe times out (metrics pod)	1
metrics.readinessProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
metrics.readinessProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (metrics pod)	1
metrics.startupProbe.enabled	Enable/disable the startup probe (metrics pod)	false
metrics.startupProbe.initialDelaySeconds	Delay before startup probe is initiated (metrics pod)	5
metrics.startupProbe.periodSeconds	How often to perform the probe (metrics pod)	10
metrics.startupProbe.timeoutSeconds	When the probe times out (metrics pod)	1
metrics.startupProbe.failureThreshold	Minimum consecutive failures for the probe to be considered failed after having succeeded	5
metrics.startupProbe.successThreshold	Minimum consecutive successes for the probe to be considered successful after having failed (metrics pod)	1
metrics.customStartupProbe	Custom liveness probe for the Web component	{}
metrics.customLivenessProbe	Custom liveness probe for the Web component	{}
metrics.customReadinessProbe	Custom readiness probe for the Web component	{}
metrics.podAnnotations	Metrics exporter pod Annotation and Labels	{}
metrics.podLabels	Extra labels to add to Pod	{}
metrics.podSecurityContext.enabled	Enabled Elasticsearch metrics exporter pods’ Security Context	true
metrics.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
metrics.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
metrics.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
metrics.podSecurityContext.fsGroup	Set Elasticsearch metrics exporter pod’s Security Context fsGroup	1001
metrics.containerSecurityContext.enabled	Elasticseacrh exporter container securityContext	true
metrics.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
metrics.containerSecurityContext.runAsUser	User ID for the Elasticseacrh exporter container	1001
metrics.containerSecurityContext.runAsGroup	Group ID for the Elasticseacrh exporter container	1001
metrics.containerSecurityContext.runAsNonRoot	Set Elasticsearch exporter container’s Security Context runAsNonRoot	true
metrics.containerSecurityContext.privileged	Set Elasticsearch exporter container’s Security Context privileged	false
metrics.containerSecurityContext.allowPrivilegeEscalation	Set Elasticsearch exporter container’s Security Context allowPrivilegeEscalation	false
metrics.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
metrics.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
metrics.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
metrics.command	Override default container command (useful when using custom images)	[]
metrics.args	Override default container args (useful when using custom images)	[]
metrics.extraEnvVars	Array with extra environment variables to add to Elasticsearch metrics exporter nodes	[]
metrics.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Elasticsearch metrics exporter nodes	""
metrics.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Elasticsearch metrics exporter nodes	""
metrics.extraVolumes	Optionally specify extra list of additional volumes for the Elasticsearch metrics exporter pod(s)	[]
metrics.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Elasticsearch metrics exporter container(s)	[]
metrics.sidecars	Add additional sidecar containers to the Elasticsearch metrics exporter pod(s)	[]
metrics.initContainers	Add additional init containers to the Elasticsearch metrics exporter pod(s)	[]
metrics.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
metrics.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
metrics.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
metrics.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}
metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using PrometheusOperator	false
metrics.serviceMonitor.namespace	Namespace which Prometheus is running in	""
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
metrics.serviceMonitor.interval	Interval at which metrics should be scraped	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
metrics.serviceMonitor.selector	ServiceMonitor selector labels	{}
metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
metrics.prometheusRule.enabled	Creates a Prometheus Operator PrometheusRule (also requires metrics.enabled to be true and metrics.prometheusRule.rules)	false
metrics.prometheusRule.namespace	Namespace for the PrometheusRule Resource (defaults to the Release Namespace)	""
metrics.prometheusRule.additionalLabels	Additional labels that can be used so PrometheusRule will be discovered by Prometheus	{}
metrics.prometheusRule.rules	Prometheus Rule definitions	[]

Init Container Parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes volume permissions in the data directory (for cases where the default k8s runAsUser and fsUser values do not work)	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image name	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Init container volume-permissions image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
sysctlImage.enabled	Enable kernel settings modifier image	true
sysctlImage.registry	Kernel settings modifier image registry	REGISTRY_NAME
sysctlImage.repository	Kernel settings modifier image repository	REPOSITORY_NAME/os-shell
sysctlImage.digest	Kernel settings modifier image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
sysctlImage.pullPolicy	Kernel settings modifier image pull policy	IfNotPresent
sysctlImage.pullSecrets	Kernel settings modifier image pull secrets	[]
sysctlImage.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if sysctlImage.resources is set (sysctlImage.resources is recommended for production).	nano
sysctlImage.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

Kibana Parameters

Name	Description	Value
kibana.elasticsearch.hosts	Array containing hostnames for the ES instances. Used to generate the URL	[]
kibana.elasticsearch.port	Port to connect Kibana and ES instance. Used to generate the URL	{{ include "elasticsearch.service.ports.restAPI" . }}

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set name=my-elastic,client.service.port=8080 \
  oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the Elasticsearch cluster name to my-elastic and REST port number to 8080.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml.

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 21.0.0

This version bumps in a major the version of the Kibana Helm Chart bundled as dependecy, here you can see the changes implemented in this Kibana major version.

To 20.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 19.6.0

This version fixes the headless services creation. When upgrading you will need to manually delete the services first in order to get them created when upgrading.

To 19.0.0

The new version of this chart no longer supports elasticsearch-curator, this repository has been deprecated.

To 18.0.0

This major release refactors the bitnami/elasticsearch chart, adding some organization and functional changes.

• Each role has now the same structure: its Statefulset, a headless service (for FQDN, it gives each node an individual Advertised name, required for TLS verification), its own ServiceAccount (BWC), and HorizontalPodAutoscaling.
• Previously, the chart would alternate between a Coordinating service and an All-nodes service for traffic exposure. This logic has been replaced with a single Traffic exposure service, that will have coordinating-only nodes as backend pods, or master pods if no coordinating nodes are enabled.
• Master-eligible nodes can now be deployed as multi-role nodes using the setting masterOnly. This allows the creation of different topologies, smaller clusters with HA (3 multi-role master-eligible nodes), and single-node deployments.
• Renamed several values to be in line with the rest of the catalog.

This major release also upgrades Elasticsearch to its version 8.x.x and the updates Kibana subchart.

• Upgrade to Elasticsearch 8
• Upgrade Kibana subchart.

In addition, several modifications have been performed adding missing features and renaming values, in order to get aligned with the rest of the assets in the Bitnami charts repository.

The following values have been modified:

• coordinating.service.* have been renamed as service.*. This service will be backed by coordinating nodes if enabled, or master nodes if not.
• master.service.* has been removed.
• data.service.* has been removed.
• master.ingress.* has been renamed as ingress.*. This ingress will be backed by the coordinating/master service previously mentioned.
• In addition, an Ingest-only service and ingress have been added, for use cases where separated ingrestion and search channels are needed.
• global.coordinating.name have been renamed as global.elasticsaerch.service.name.
• name has been renamed as clusterName.
• extraEnvVarsConfigMap has been renamed as extraEnvVarsCM.
• {master/data/ingest/coordinating}.replicas has been renamed as {master/data/ingest/coordinating}.replicaCount.
• {master/data/ingest/coordinating}.securityContext has been separated in two different values: podSecurityContext and containerSecurityContext.
• {master/data/ingest/coordinating}.updateStrategy is now interpreted as an object. rollingUpdatePartition has been removed and has to be configured inside the updateStrategy object when needed.
• Default values for kibana.elasticsearch.hosts and kibana.elasticsearch.port have been modified to use the new helpers.
• {master/data/ingest/coordinating/curator/metrics}.name has been renamed as {master/data/ingest/coordinating/curator}.nameOverride.

To 17.0.0

This version bumps in a major the version of the Kibana Helm Chart bundled as dependecy, here you can see the changes implemented in this Kibana major version.

To 16.0.0

This version replaces the Ingest and Coordinating Deployments with Statefulsets. This change is required so Coordinating and Ingest nodes have their services associated, required for TLS hostname verification.

We haven’t encountered any issues during our upgrade test, but we recommend creating volumes backups before upgrading this major version, especially for users with additional volumes and custom configurations.

Additionally, this version adds support for X-Pack Security features such as TLS/SSL encryption and basic authentication.

To 15.0.0

From this version onwards, Elasticsearch container components are now licensed under the Elastic License that is not currently accepted as an Open Source license by the Open Source Initiative (OSI).

Also, from now on, the Helm Chart will include the X-Pack plugin installed by default.

Regular upgrade is compatible from previous versions.

To 14.0.0

This version standardizes the way of defining Ingress rules in the Kibana subchart. When configuring a single hostname for the Ingress rule, set the kibana.ingress.hostname value. When defining more than one, set the kibana.ingress.extraHosts array. Apart from this case, no issues are expected to appear when upgrading.

To 13.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn’t face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn’t support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://docs.vmware.com/en/VMware-Tanzu-Application-Catalog/services/tutorials/GUID-resolve-helm2-helm3-post-migration-issues-index.html
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 12.0.0

Several changes were introduced that breaks backwards compatibility:

• Ports names were prefixed with the protocol to comply with Istio (see https://istio.io/docs/ops/deployment/requirements/).
• Labels are adapted to follow the Helm charts best practices.
• Elasticsearch data pods are now deployed in parallel in order to bootstrap the cluster and be discovered.

To 11.0.0

Elasticsearch master pods are now deployed in parallel in order to bootstrap the cluster and be discovered.

The field podManagementPolicy can’t be updated in a StatefulSet, so you need to destroy it before you upgrade the chart to this version.

kubectl delete statefulset elasticsearch-master
helm upgrade <DEPLOYMENT_NAME> oci://REGISTRY_NAME/REPOSITORY_NAME/elasticsearch

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

TO 10.0.0

In this version, Kibana was added as dependent chart. More info about how to enable and work with this bundled Kibana in the “Enable bundled Kibana” section.

To 9.0.0

Elasticsearch master nodes store the cluster status at /bitnami/elasticsearch/data. Among other things this includes the UUID of the elasticsearch cluster. Without a persistent data store for this data, the UUID of a cluster could change if k8s node(s) hosting the es master nodes go down and are scheduled on some other master node. In the event that this happens, the data nodes will no longer be able to join a cluster as the uuid changed resulting in a broken cluster.

To resolve such issues, PVC’s are now attached for master node data persistence.

---

Helm performs a lookup for the object based on its group (apps), version (v1), and kind (Deployment). Also known as its GroupVersionKind, or GVK. Changing the GVK is considered a compatibility breaker from Kubernetes’ point of view, so you cannot “upgrade” those objects to the new GVK in-place. Earlier versions of Helm 3 did not perform the lookup correctly which has since been fixed to match the spec.

In 4dfac075aacf74405e31ae5b27df4369e84eb0b0 the apiVersion of the deployment resources was updated to apps/v1 in tune with the api’s deprecated, resulting in compatibility breakage.

To 7.4.0

This version also introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 7.0.0

This version enabled by default the initContainer that modify some kernel settings to meet the Elasticsearch requirements. More info in the “Default kernel settings” section. You can disable the initContainer using the sysctlImage.enabled=false parameter.

To 3.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart’s deployments. Use the workaround below to upgrade from versions previous to 3.0.0. The following example assumes that the release name is elasticsearch:

kubectl patch deployment elasticsearch-coordinating --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl patch deployment elasticsearch-ingest --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl patch deployment elasticsearch-master --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl patch deployment elasticsearch-metrics --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl delete statefulset elasticsearch-data --cascade=false

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.