Bitnami package for Grafana Mimir

Grafana Mimir is an open source, horizontally scalable, highly available, multi-tenant, long-term storage for Prometheus.

Overview of Grafana Mimir

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/grafana-mimir

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.

This chart bootstraps a Grafana Mimir Deployment in a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/grafana-mimir

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys grafana-mimir on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Mimir configuration

The mimir configuration file mimir.yaml is shared across the different components: distributor, compactor, ingester, querier, query-frontend and store-gateway. This is set in the mimir.configuration value. That value is templated, so you can use other chart values or templates in your configuration. Check the official Mimir Mimir documentation for the list of possible configurations.

Data

The Bitnami grafana-mimir image stores the data at the /bitnami path of the container. Persistent Volume Claims are used to keep the data across deployments.

Additional environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property inside each of the subsections: distributor, compactor, ingester, querier, queryFrontend and storeGateway. This is very useful if you need to use enviroment variables in your config file for example to set

mimir:
  blockStorage:
    backend: s3
    config: |
      access_key_id: ${S3_ACCESS_KEY_ID}
      secret_access_key: ${S3_SECRET_ACCESS_KEY}
      bucket_name: mimir
      endpoint: s3.us-east-1.amazonaws.com
      insecure: false
storeGateway:
  extraEnvVars:
    - name: S3_ACCESS_KEY_ID
      valueFrom:
        secretKeyRef:
          name: s3-credentials-secret
          key: access-key-id
    - name: S3_SECRET_ACCESS_KEY
      valueFrom:
        secretKeyRef:
          name: s3-credentials-secret
          key: secret-access-key

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Pod affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod affinity in the kubernetes documentation.

As an alternative, use one of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters inside each of the subsections: distributor, compactor, ingester, querier, queryFrontend and storeGateway.

External cache support

You may want to have Grafana Mimir connect to an external Memcached rather than installing one inside your cluster. Typical reasons for this are to use a managed cache service, or to share a common cache server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalMemcached* parameters. You should also disable the Memcached installation with the enabled option. Here is an example:

memcachedchunks.enabled=false
externalMemcachedChunks.host=myexternalhost
externalMemcachedChunks.port=11211

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.name	""
fullnameOverride	String to fully override common.names.fullname	""
namespaceOverride	String to fully override common.names.namespace	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployment	["sleep"]
diagnosticMode.args	Args to override all containers in the deployment	["infinity"]

Common Grafana Mimir Parameters

Name	Description	Value
mimir.image.registry	Grafana Mimir image registry	REGISTRY_NAME
mimir.image.repository	Grafana Mimir image repository	REPOSITORY_NAME/grafana-mimir
mimir.image.digest	Grafana Mimir image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
mimir.image.pullPolicy	Grafana Mimir image pull policy	IfNotPresent
mimir.image.pullSecrets	Grafana Mimir image pull secrets	[]
mimir.dataDir	path to the Mimir data directory	/bitnami/grafana-mimir
mimir.configuration	Mimir components configuration	""
mimir.overrideConfiguration	Mimir components configuration override. Values defined here takes precedence over mimir.configuration	{}
mimir.existingConfigmap	Name of a ConfigMap with the Mimir configuration	""
mimir.httpPrefix.prometheus	HTTP URL path under which the Prometheus api will be served.	/prometheus
mimir.httpPrefix.alertmanager	HTTP URL path under which the Alertmanager ui and api will be served.	/alertmanager
mimir.containerPorts.http	Grafana Mimir HTTP container port. This configuration is set mimir.yaml config file and is common for all Grafana Mimir components.	8080
mimir.containerPorts.grpc	Grafana Mimir GRPC container port. This configuration is set mimir.yaml config file and is common for all Grafana Mimircomponents.	9095
mimir.containerPorts.gossipRing	Grafana Mimir memberlist container port. This configuration is set mimir.yaml config file and is common for all Grafana Mimir components.	7946
mimir.gossipRing.service.ports.http	Gossip Ring HTTP headless service port	7946
mimir.gossipRing.service.annotations	Additional custom annotations for Gossip Ring headless service	{}
mimir.blockStorage.backend	Backend storage to use. NOTE: if minio.enable == true, this configuration will be ignored.	s3
mimir.blockStorage.config	Configures connection to the backend store. NOTE: if minio.enable == true, this configuration will be ignored.	{}

Alertmanager Deployment Parameters

Name	Description	Value
alertmanager.enabled	Enable alertmanager deployment	false
alertmanager.extraEnvVars	Array with extra environment variables to add to alertmanager nodes	[]
alertmanager.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for alertmanager nodes	""
alertmanager.extraEnvVarsSecret	Name of existing Secret containing extra env vars for alertmanager nodes	""
alertmanager.command	Override default container command (useful when using custom images)	[]
alertmanager.args	Override default container args (useful when using custom images)	[]
alertmanager.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
alertmanager.replicaCount	Number of Alertmanager replicas to deploy	1
alertmanager.podManagementPolicy	Statefulset Pod management policy, it needs to be Parallel to be able to complete the cluster join	OrderedReady
alertmanager.livenessProbe.enabled	Enable livenessProbe on Alertmanager nodes	true
alertmanager.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
alertmanager.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
alertmanager.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
alertmanager.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
alertmanager.livenessProbe.successThreshold	Success threshold for livenessProbe	1
alertmanager.readinessProbe.enabled	Enable readinessProbe on Alertmanager nodes	true
alertmanager.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
alertmanager.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
alertmanager.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
alertmanager.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
alertmanager.readinessProbe.successThreshold	Success threshold for readinessProbe	1
alertmanager.startupProbe.enabled	Enable startupProbe on Alertmanager containers	false
alertmanager.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
alertmanager.startupProbe.periodSeconds	Period seconds for startupProbe	10
alertmanager.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
alertmanager.startupProbe.failureThreshold	Failure threshold for startupProbe	15
alertmanager.startupProbe.successThreshold	Success threshold for startupProbe	1
alertmanager.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
alertmanager.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
alertmanager.customStartupProbe	Custom startupProbe that overrides the default one	{}
alertmanager.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if alertmanager.resources is set (alertmanager.resources is recommended for production).	nano
alertmanager.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
alertmanager.podSecurityContext.enabled	Enabled Alertmanager pods’ Security Context	true
alertmanager.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
alertmanager.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
alertmanager.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
alertmanager.podSecurityContext.fsGroup	Set Alertmanager pod’s Security Context fsGroup	1001
alertmanager.containerSecurityContext.enabled	Enabled containers’ Security Context	true
alertmanager.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
alertmanager.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
alertmanager.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
alertmanager.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
alertmanager.containerSecurityContext.privileged	Set container’s Security Context privileged	false
alertmanager.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
alertmanager.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
alertmanager.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
alertmanager.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
alertmanager.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
alertmanager.automountServiceAccountToken	Mount Service Account token in pod	false
alertmanager.hostAliases	ingester pods host aliases	[]
alertmanager.podLabels	Extra labels for ingester pods	{}
alertmanager.podAnnotations	Annotations for ingester pods	{}
alertmanager.podAffinityPreset	Pod affinity preset. Ignored if alertmanager.affinity is set. Allowed values: soft or hard	""
alertmanager.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if alertmanager.affinity is set. Allowed values: soft or hard	soft
alertmanager.nodeAffinityPreset.type	Node affinity preset type. Ignored if alertmanager.affinity is set. Allowed values: soft or hard	""
alertmanager.nodeAffinityPreset.key	Node label key to match. Ignored if alertmanager.affinity is set	""
alertmanager.nodeAffinityPreset.values	Node label values to match. Ignored if alertmanager.affinity is set	[]
alertmanager.affinity	Affinity for Alertmanager pods assignment	{}
alertmanager.nodeSelector	Node labels for Alertmanager pods assignment	{}
alertmanager.tolerations	Tolerations for Alertmanager pods assignment	[]
alertmanager.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
alertmanager.priorityClassName	Alertmanager pods’ priorityClassName	""
alertmanager.schedulerName	Kubernetes pod scheduler registry	""
alertmanager.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
alertmanager.updateStrategy.type	Alertmanager statefulset strategy type	RollingUpdate
alertmanager.updateStrategy.rollingUpdate	Alertmanager statefulset rolling update configuration parameters	{}
alertmanager.extraVolumes	Optionally specify extra list of additional volumes for the Alertmanager pod(s)	[]
alertmanager.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Alertmanager container(s)	[]
alertmanager.sidecars	Add additional sidecar containers to the Alertmanager pod(s)	[]
alertmanager.initContainers	Add additional init containers to the Alertmanager pod(s)	[]
alertmanager.persistence.enabled	Enable persistence in alertmanager instances	true
alertmanager.persistence.storageClass	PVC Storage Class for alertmanager data volume	""
alertmanager.persistence.accessModes	PVC Access modes	["ReadWriteOnce"]
alertmanager.persistence.size	PVC Storage Request for alertmanager data volume	8Gi
alertmanager.persistence.annotations	Additional PVC annotations	{}
alertmanager.persistence.selector	Selector to match an existing Persistent Volume for alertmanager’s data PVC	{}
alertmanager.persistence.dataSource	PVC data source	{}

Alertmanager Traffic Exposure Parameters

Name	Description	Value
alertmanager.service.type	Alertmanager service type	ClusterIP
alertmanager.service.ports.http	Alertmanager HTTP service port	8080
alertmanager.service.ports.grpc	Alertmanager GRPC service port	9095
alertmanager.service.nodePorts.http	Node port for HTTP	""
alertmanager.service.nodePorts.grpc	Node port for GRPC	9095
alertmanager.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
alertmanager.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
alertmanager.service.clusterIP	Alertmanager service Cluster IP	""
alertmanager.service.loadBalancerIP	Alertmanager service Load Balancer IP	""
alertmanager.service.loadBalancerSourceRanges	Alertmanager service Load Balancer sources	[]
alertmanager.service.externalTrafficPolicy	Alertmanager service external traffic policy	Cluster
alertmanager.service.annotations	Additional custom annotations for Alertmanager service	{}
alertmanager.service.extraPorts	Extra ports to expose in the Alertmanager service	[]
alertmanager.service.headless.annotations	Annotations for the headless service.	{}
alertmanager.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
alertmanager.networkPolicy.allowExternal	Don’t require server label for connections	true
alertmanager.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
alertmanager.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
alertmanager.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
alertmanager.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
alertmanager.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
alertmanager.pdb.create	Enable/disable a Pod Disruption Budget creation	true
alertmanager.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
alertmanager.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
alertmanager.blockStorage.backend	Backend storage to use. NOTE: if minio.enable == true, this configuration will be ignored.	s3
alertmanager.blockStorage.config	Configures connection to the backend store. NOTE: if minio.enable == true, this configuration will be ignored.	{}

Compactor Deployment Parameters

Name	Description	Value
compactor.extraEnvVars	Array with extra environment variables to add to compactor nodes	[]
compactor.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for compactor nodes	""
compactor.extraEnvVarsSecret	Name of existing Secret containing extra env vars for compactor nodes	""
compactor.command	Override default container command (useful when using custom images)	[]
compactor.args	Override default container args (useful when using custom images)	[]
compactor.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
compactor.replicaCount	Number of Compactor replicas to deploy	1
compactor.podManagementPolicy	Statefulset Pod management policy, it needs to be Parallel to be able to complete the cluster join	OrderedReady
compactor.livenessProbe.enabled	Enable livenessProbe on Compactor nodes	true
compactor.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
compactor.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
compactor.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
compactor.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
compactor.livenessProbe.successThreshold	Success threshold for livenessProbe	1
compactor.readinessProbe.enabled	Enable readinessProbe on Compactor nodes	true
compactor.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
compactor.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
compactor.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
compactor.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
compactor.readinessProbe.successThreshold	Success threshold for readinessProbe	1
compactor.startupProbe.enabled	Enable startupProbe on Compactor containers	false
compactor.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
compactor.startupProbe.periodSeconds	Period seconds for startupProbe	10
compactor.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
compactor.startupProbe.failureThreshold	Failure threshold for startupProbe	15
compactor.startupProbe.successThreshold	Success threshold for startupProbe	1
compactor.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
compactor.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
compactor.customStartupProbe	Custom startupProbe that overrides the default one	{}
compactor.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if compactor.resources is set (compactor.resources is recommended for production).	nano
compactor.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
compactor.podSecurityContext.enabled	Enabled Compactor pods’ Security Context	true
compactor.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
compactor.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
compactor.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
compactor.podSecurityContext.fsGroup	Set Compactor pod’s Security Context fsGroup	1001
compactor.containerSecurityContext.enabled	Enabled containers’ Security Context	true
compactor.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
compactor.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
compactor.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
compactor.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
compactor.containerSecurityContext.privileged	Set container’s Security Context privileged	false
compactor.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
compactor.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
compactor.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
compactor.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
compactor.lifecycleHooks	for the compactor container(s) to automate configuration before or after startup	{}
compactor.automountServiceAccountToken	Mount Service Account token in pod	false
compactor.hostAliases	compactor pods host aliases	[]
compactor.podLabels	Extra labels for compactor pods	{}
compactor.podAnnotations	Annotations for compactor pods	{}
compactor.podAffinityPreset	Pod affinity preset. Ignored if compactor.affinity is set. Allowed values: soft or hard	""
compactor.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if compactor.affinity is set. Allowed values: soft or hard	soft
compactor.nodeAffinityPreset.type	Node affinity preset type. Ignored if compactor.affinity is set. Allowed values: soft or hard	""
compactor.nodeAffinityPreset.key	Node label key to match. Ignored if compactor.affinity is set	""
compactor.nodeAffinityPreset.values	Node label values to match. Ignored if compactor.affinity is set	[]
compactor.affinity	Affinity for Compactor pods assignment	{}
compactor.nodeSelector	Node labels for Compactor pods assignment	{}
compactor.tolerations	Tolerations for Compactor pods assignment	[]
compactor.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
compactor.priorityClassName	Compactor pods’ priorityClassName	""
compactor.schedulerName	Kubernetes pod scheduler registry	""
compactor.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
compactor.updateStrategy.type	Compactor statefulset strategy type	RollingUpdate
compactor.updateStrategy.rollingUpdate	Compactor statefulset rolling update configuration parameters	{}
compactor.extraVolumes	Optionally specify extra list of additional volumes for the Compactor pod(s)	[]
compactor.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Compactor container(s)	[]
compactor.sidecars	Add additional sidecar containers to the Compactor pod(s)	[]
compactor.initContainers	Add additional init containers to the Compactor pod(s)	[]
compactor.persistence.enabled	Enable persistence in Compactor instances	true
compactor.persistence.storageClass	PVC Storage Class for Compactor data volume	""
compactor.persistence.accessModes	PVC Access modes	["ReadWriteOnce"]
compactor.persistence.size	PVC Storage Request for Compactor data volume	8Gi
compactor.persistence.annotations	Additional PVC annotations	{}
compactor.persistence.selector	Selector to match an existing Persistent Volume for Compactor’s data PVC	{}
compactor.persistence.dataSource	PVC data source	{}

Compactor Traffic Exposure Parameters

Name	Description	Value
compactor.service.type	Compactor service type	ClusterIP
compactor.service.ports.http	Compactor HTTP service port	8080
compactor.service.ports.grpc	Compactor GRPC service port	9095
compactor.service.nodePorts.http	Node port for HTTP	""
compactor.service.nodePorts.grpc	Node port for GRPC	9095
compactor.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
compactor.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
compactor.service.clusterIP	Compactor service Cluster IP	""
compactor.service.loadBalancerIP	Compactor service Load Balancer IP	""
compactor.service.loadBalancerSourceRanges	Compactor service Load Balancer sources	[]
compactor.service.externalTrafficPolicy	Compactor service external traffic policy	Cluster
compactor.service.annotations	Additional custom annotations for Compactor service	{}
compactor.service.extraPorts	Extra ports to expose in the Compactor service	[]
compactor.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
compactor.networkPolicy.allowExternal	Don’t require server label for connections	true
compactor.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
compactor.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
compactor.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
compactor.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
compactor.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
compactor.pdb.create	Enable/disable a Pod Disruption Budget creation	true
compactor.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
compactor.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Distributor Deployment Parameters

Name	Description	Value
distributor.extraEnvVars	Array with extra environment variables to add to distributor nodes	[]
distributor.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for distributor nodes	""
distributor.extraEnvVarsSecret	Name of existing Secret containing extra env vars for distributor nodes	""
distributor.command	Override default container command (useful when using custom images)	[]
distributor.args	Override default container args (useful when using custom images)	[]
distributor.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
distributor.replicaCount	Number of Distributor replicas to deploy	1
distributor.livenessProbe.enabled	Enable livenessProbe on Distributor nodes	true
distributor.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
distributor.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
distributor.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
distributor.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
distributor.livenessProbe.successThreshold	Success threshold for livenessProbe	1
distributor.readinessProbe.enabled	Enable readinessProbe on Distributor nodes	true
distributor.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
distributor.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
distributor.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
distributor.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
distributor.readinessProbe.successThreshold	Success threshold for readinessProbe	1
distributor.startupProbe.enabled	Enable startupProbe on Distributor containers	false
distributor.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
distributor.startupProbe.periodSeconds	Period seconds for startupProbe	10
distributor.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
distributor.startupProbe.failureThreshold	Failure threshold for startupProbe	15
distributor.startupProbe.successThreshold	Success threshold for startupProbe	1
distributor.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
distributor.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
distributor.customStartupProbe	Custom startupProbe that overrides the default one	{}
distributor.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if distributor.resources is set (distributor.resources is recommended for production).	nano
distributor.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
distributor.podSecurityContext.enabled	Enabled Distributor pods’ Security Context	true
distributor.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
distributor.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
distributor.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
distributor.podSecurityContext.fsGroup	Set Distributor pod’s Security Context fsGroup	1001
distributor.containerSecurityContext.enabled	Enabled containers’ Security Context	true
distributor.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
distributor.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
distributor.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
distributor.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
distributor.containerSecurityContext.privileged	Set container’s Security Context privileged	false
distributor.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
distributor.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
distributor.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
distributor.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
distributor.lifecycleHooks	for the distributor container(s) to automate configuration before or after startup	{}
distributor.automountServiceAccountToken	Mount Service Account token in pod	false
distributor.hostAliases	distributor pods host aliases	[]
distributor.podLabels	Extra labels for distributor pods	{}
distributor.podAnnotations	Annotations for distributor pods	{}
distributor.podAffinityPreset	Pod affinity preset. Ignored if distributor.affinity is set. Allowed values: soft or hard	""
distributor.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if distributor.affinity is set. Allowed values: soft or hard	soft
distributor.nodeAffinityPreset.type	Node affinity preset type. Ignored if distributor.affinity is set. Allowed values: soft or hard	""
distributor.nodeAffinityPreset.key	Node label key to match. Ignored if distributor.affinity is set	""
distributor.nodeAffinityPreset.values	Node label values to match. Ignored if distributor.affinity is set	[]
distributor.affinity	Affinity for Distributor pods assignment	{}
distributor.nodeSelector	Node labels for Distributor pods assignment	{}
distributor.tolerations	Tolerations for Distributor pods assignment	[]
distributor.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
distributor.priorityClassName	Distributor pods’ priorityClassName	""
distributor.schedulerName	Kubernetes pod scheduler registry	""
distributor.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
distributor.updateStrategy.type	Distributor statefulset strategy type	RollingUpdate
distributor.updateStrategy.rollingUpdate	Distributor statefulset rolling update configuration parameters	{}
distributor.extraVolumes	Optionally specify extra list of additional volumes for the Distributor pod(s)	[]
distributor.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Distributor container(s)	[]
distributor.sidecars	Add additional sidecar containers to the Distributor pod(s)	[]
distributor.initContainers	Add additional init containers to the Distributor pod(s)	[]

Distributor Traffic Exposure Parameters

Name	Description	Value
distributor.service.type	Distributor service type	ClusterIP
distributor.service.ports.http	Distributor HTTP service port	8080
distributor.service.ports.grpc	Distributor GRPC service port	9095
distributor.service.nodePorts.http	Node port for HTTP	""
distributor.service.nodePorts.grpc	Node port for GRPC	9095
distributor.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
distributor.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
distributor.service.clusterIP	Distributor service Cluster IP	""
distributor.service.loadBalancerIP	Distributor service Load Balancer IP	""
distributor.service.loadBalancerSourceRanges	Distributor service Load Balancer sources	[]
distributor.service.externalTrafficPolicy	Distributor service external traffic policy	Cluster
distributor.service.annotations	Additional custom annotations for Distributor service	{}
distributor.service.extraPorts	Extra ports to expose in the Distributor service	[]
distributor.service.headless.annotations	Annotations for the headless service.	{}
distributor.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
distributor.networkPolicy.allowExternal	Don’t require server label for connections	true
distributor.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
distributor.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
distributor.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
distributor.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
distributor.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
distributor.pdb.create	Enable/disable a Pod Disruption Budget creation	true
distributor.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
distributor.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Gateway Deployment Parameters

Name	Description	Value
gateway.enabled	Enable Gateway deployment	true
gateway.image.registry	Nginx image registry	REGISTRY_NAME
gateway.image.repository	Nginx image repository	REPOSITORY_NAME/nginx
gateway.image.digest	Nginx image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
gateway.image.pullPolicy	Nginx image pull policy	IfNotPresent
gateway.image.pullSecrets	Nginx image pull secrets	[]
gateway.image.debug	Enable debugging in the initialization process	false
gateway.extraEnvVars	Array with extra environment variables to add to gateway nodes	[]
gateway.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for gateway nodes	""
gateway.extraEnvVarsSecret	Name of existing Secret containing extra env vars for gateway nodes	""
gateway.command	Override default container command (useful when using custom images)	[]
gateway.args	Override default container args (useful when using custom images)	[]
gateway.verboseLogging	Show the gateway access_log	false
gateway.replicaCount	Number of Gateway replicas to deploy	1
gateway.auth.enabled	Enable basic auth	false
gateway.auth.username	Basic auth username	user
gateway.auth.password	Basic auth password	""
gateway.auth.existingSecret	Name of a secret containing the Basic auth password	""
gateway.livenessProbe.enabled	Enable livenessProbe on Gateway nodes	true
gateway.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	10
gateway.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
gateway.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
gateway.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
gateway.livenessProbe.successThreshold	Success threshold for livenessProbe	1
gateway.readinessProbe.enabled	Enable readinessProbe on Gateway nodes	true
gateway.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
gateway.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
gateway.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
gateway.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
gateway.readinessProbe.successThreshold	Success threshold for readinessProbe	1
gateway.startupProbe.enabled	Enable startupProbe on Gateway containers	false
gateway.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	10
gateway.startupProbe.periodSeconds	Period seconds for startupProbe	10
gateway.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
gateway.startupProbe.failureThreshold	Failure threshold for startupProbe	15
gateway.startupProbe.successThreshold	Success threshold for startupProbe	1
gateway.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
gateway.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
gateway.customStartupProbe	Custom startupProbe that overrides the default one	{}
gateway.containerPorts.http	Gateway HTTP port	8080
gateway.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if gateway.resources is set (gateway.resources is recommended for production).	nano
gateway.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
gateway.podSecurityContext.enabled	Enabled Gateway pods’ Security Context	true
gateway.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
gateway.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
gateway.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
gateway.podSecurityContext.fsGroup	Set Gateway pod’s Security Context fsGroup	1001
gateway.containerSecurityContext.enabled	Enabled containers’ Security Context	true
gateway.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
gateway.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
gateway.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
gateway.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
gateway.containerSecurityContext.privileged	Set container’s Security Context privileged	false
gateway.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
gateway.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
gateway.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
gateway.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
gateway.lifecycleHooks	for the gateway container(s) to automate configuration before or after startup	{}
gateway.automountServiceAccountToken	Mount Service Account token in pod	false
gateway.hostAliases	gateway pods host aliases	[]
gateway.podLabels	Extra labels for gateway pods	{}
gateway.podAnnotations	Annotations for gateway pods	{}
gateway.podAffinityPreset	Pod affinity preset. Ignored if gateway.affinity is set. Allowed values: soft or hard	""
gateway.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if gateway.affinity is set. Allowed values: soft or hard	soft
gateway.nodeAffinityPreset.type	Node affinity preset type. Ignored if gateway.affinity is set. Allowed values: soft or hard	""
gateway.nodeAffinityPreset.key	Node label key to match. Ignored if gateway.affinity is set	""
gateway.nodeAffinityPreset.values	Node label values to match. Ignored if gateway.affinity is set	[]
gateway.affinity	Affinity for Gateway pods assignment	{}
gateway.nodeSelector	Node labels for Gateway pods assignment	{}
gateway.tolerations	Tolerations for Gateway pods assignment	[]
gateway.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
gateway.priorityClassName	Gateway pods’ priorityClassName	""
gateway.schedulerName	Kubernetes pod scheduler registry	""
gateway.updateStrategy.type	Gateway statefulset strategy type	RollingUpdate
gateway.updateStrategy.rollingUpdate	Gateway statefulset rolling update configuration parameters	{}
gateway.extraVolumes	Optionally specify extra list of additional volumes for the Gateway pod(s)	[]
gateway.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Gateway container(s)	[]
gateway.sidecars	Add additional sidecar containers to the Gateway pod(s)	[]
gateway.initContainers	Add additional init containers to the Gateway pod(s)	[]

Gateway Traffic Exposure Parameters

Name	Description	Value
gateway.service.type	Gateway service type	ClusterIP
gateway.service.ports.http	Gateway HTTP service port	80
gateway.service.nodePorts.http	Node port for HTTP	""
gateway.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
gateway.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
gateway.service.clusterIP	Gateway service Cluster IP	""
gateway.service.loadBalancerIP	Gateway service Load Balancer IP	""
gateway.service.loadBalancerSourceRanges	Gateway service Load Balancer sources	[]
gateway.service.externalTrafficPolicy	Gateway service external traffic policy	Cluster
gateway.service.annotations	Additional custom annotations for Gateway service	{}
gateway.service.extraPorts	Extra ports to expose in the Gateway service	[]
gateway.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
gateway.networkPolicy.allowExternal	Don’t require server label for connections	true
gateway.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
gateway.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
gateway.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
gateway.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
gateway.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
gateway.ingress.enabled	Enable ingress record generation for Mimir Gateway	false
gateway.ingress.pathType	Ingress path type	ImplementationSpecific
gateway.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
gateway.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
gateway.ingress.hostname	Default host for the ingress record	grafana-mimir.local
gateway.ingress.path	Default path for the ingress record	/
gateway.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
gateway.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
gateway.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
gateway.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
gateway.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
gateway.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
gateway.ingress.secrets	Custom TLS certificates as secrets	[]
gateway.pdb.create	Enable/disable a Pod Disruption Budget creation	true
gateway.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
gateway.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Ingester Deployment Parameters

Name	Description	Value
ingester.extraEnvVars	Array with extra environment variables to add to ingester nodes	[]
ingester.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for ingester nodes	""
ingester.extraEnvVarsSecret	Name of existing Secret containing extra env vars for ingester nodes	""
ingester.command	Override default container command (useful when using custom images)	[]
ingester.args	Override default container args (useful when using custom images)	[]
ingester.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
ingester.replicaCount	Number of Ingester replicas to deploy	2
ingester.podManagementPolicy	Statefulset Pod management policy, it needs to be Parallel to be able to complete the cluster join	OrderedReady
ingester.livenessProbe.enabled	Enable livenessProbe on Ingester nodes	true
ingester.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
ingester.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
ingester.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
ingester.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
ingester.livenessProbe.successThreshold	Success threshold for livenessProbe	1
ingester.readinessProbe.enabled	Enable readinessProbe on Ingester nodes	true
ingester.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
ingester.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
ingester.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
ingester.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
ingester.readinessProbe.successThreshold	Success threshold for readinessProbe	1
ingester.startupProbe.enabled	Enable startupProbe on Ingester containers	false
ingester.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
ingester.startupProbe.periodSeconds	Period seconds for startupProbe	10
ingester.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
ingester.startupProbe.failureThreshold	Failure threshold for startupProbe	15
ingester.startupProbe.successThreshold	Success threshold for startupProbe	1
ingester.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
ingester.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
ingester.customStartupProbe	Custom startupProbe that overrides the default one	{}
ingester.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if ingester.resources is set (ingester.resources is recommended for production).	nano
ingester.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
ingester.podSecurityContext.enabled	Enabled Ingester pods’ Security Context	true
ingester.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
ingester.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
ingester.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
ingester.podSecurityContext.fsGroup	Set Ingester pod’s Security Context fsGroup	1001
ingester.containerSecurityContext.enabled	Enabled containers’ Security Context	true
ingester.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
ingester.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
ingester.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
ingester.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
ingester.containerSecurityContext.privileged	Set container’s Security Context privileged	false
ingester.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
ingester.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
ingester.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
ingester.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
ingester.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
ingester.automountServiceAccountToken	Mount Service Account token in pod	false
ingester.hostAliases	ingester pods host aliases	[]
ingester.podLabels	Extra labels for ingester pods	{}
ingester.podAnnotations	Annotations for ingester pods	{}
ingester.podAffinityPreset	Pod affinity preset. Ignored if ingester.affinity is set. Allowed values: soft or hard	""
ingester.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if ingester.affinity is set. Allowed values: soft or hard	soft
ingester.nodeAffinityPreset.type	Node affinity preset type. Ignored if ingester.affinity is set. Allowed values: soft or hard	""
ingester.nodeAffinityPreset.key	Node label key to match. Ignored if ingester.affinity is set	""
ingester.nodeAffinityPreset.values	Node label values to match. Ignored if ingester.affinity is set	[]
ingester.affinity	Affinity for Ingester pods assignment	{}
ingester.nodeSelector	Node labels for Ingester pods assignment	{}
ingester.tolerations	Tolerations for Ingester pods assignment	[]
ingester.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
ingester.priorityClassName	Ingester pods’ priorityClassName	""
ingester.schedulerName	Kubernetes pod scheduler registry	""
ingester.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
ingester.updateStrategy.type	Ingester statefulset strategy type	RollingUpdate
ingester.updateStrategy.rollingUpdate	Ingester statefulset rolling update configuration parameters	{}
ingester.extraVolumes	Optionally specify extra list of additional volumes for the Ingester pod(s)	[]
ingester.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Ingester container(s)	[]
ingester.sidecars	Add additional sidecar containers to the Ingester pod(s)	[]
ingester.initContainers	Add additional init containers to the Ingester pod(s)	[]
ingester.persistence.enabled	Enable persistence in Ingester instances	true
ingester.persistence.storageClass	PVC Storage Class for Ingester data volume	""
ingester.persistence.accessModes	PVC Access modes	["ReadWriteOnce"]
ingester.persistence.size	PVC Storage Request for Ingester data volume	8Gi
ingester.persistence.annotations	Additional PVC annotations	{}
ingester.persistence.selector	Selector to match an existing Persistent Volume for Ingester’s data PVC	{}
ingester.persistence.dataSource	PVC data source	{}

Ingester Traffic Exposure Parameters

Name	Description	Value
ingester.service.type	Ingester service type	ClusterIP
ingester.service.ports.http	Ingester HTTP service port	8080
ingester.service.ports.grpc	Ingester GRPC service port	9095
ingester.service.nodePorts.http	Node port for HTTP	""
ingester.service.nodePorts.grpc	Node port for GRPC	9095
ingester.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
ingester.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
ingester.service.clusterIP	Ingester service Cluster IP	""
ingester.service.loadBalancerIP	Ingester service Load Balancer IP	""
ingester.service.loadBalancerSourceRanges	Ingester service Load Balancer sources	[]
ingester.service.externalTrafficPolicy	Ingester service external traffic policy	Cluster
ingester.service.annotations	Additional custom annotations for Ingester service	{}
ingester.service.extraPorts	Extra ports to expose in the Ingester service	[]
ingester.service.headless.annotations	Annotations for the headless service.	{}
ingester.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
ingester.networkPolicy.allowExternal	Don’t require server label for connections	true
ingester.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
ingester.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
ingester.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
ingester.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
ingester.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
ingester.pdb.create	Enable/disable a Pod Disruption Budget creation	true
ingester.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
ingester.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
overridesExporter.enabled	Enable overrides-exporter deployment	false
overridesExporter.extraEnvVars	Array with extra environment variables to add to overrides-exporter nodes	[]
overridesExporter.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for overrides-exporter nodes	""
overridesExporter.extraEnvVarsSecret	Name of existing Secret containing extra env vars for overrides-exporter nodes	""
overridesExporter.command	Override default container command (useful when using custom images)	[]
overridesExporter.args	Override default container args (useful when using custom images)	[]
overridesExporter.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
overridesExporter.replicaCount	Number of Overrides Exporter replicas to deploy	1
overridesExporter.livenessProbe.enabled	Enable livenessProbe on Overrides Exporter nodes	true
overridesExporter.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
overridesExporter.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
overridesExporter.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
overridesExporter.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
overridesExporter.livenessProbe.successThreshold	Success threshold for livenessProbe	1
overridesExporter.readinessProbe.enabled	Enable readinessProbe on Overrides Exporter nodes	true
overridesExporter.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
overridesExporter.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
overridesExporter.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
overridesExporter.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
overridesExporter.readinessProbe.successThreshold	Success threshold for readinessProbe	1
overridesExporter.startupProbe.enabled	Enable startupProbe on Overrides Exporter containers	false
overridesExporter.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
overridesExporter.startupProbe.periodSeconds	Period seconds for startupProbe	10
overridesExporter.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
overridesExporter.startupProbe.failureThreshold	Failure threshold for startupProbe	15
overridesExporter.startupProbe.successThreshold	Success threshold for startupProbe	1
overridesExporter.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
overridesExporter.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
overridesExporter.customStartupProbe	Custom startupProbe that overrides the default one	{}
overridesExporter.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if overridesExporter.resources is set (overridesExporter.resources is recommended for production).	nano
overridesExporter.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
overridesExporter.podSecurityContext.enabled	Enabled Overrides Exporter pods’ Security Context	true
overridesExporter.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
overridesExporter.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
overridesExporter.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
overridesExporter.podSecurityContext.fsGroup	Set Overrides Exporter pod’s Security Context fsGroup	1001
overridesExporter.containerSecurityContext.enabled	Enabled containers’ Security Context	true
overridesExporter.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
overridesExporter.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
overridesExporter.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
overridesExporter.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
overridesExporter.containerSecurityContext.privileged	Set container’s Security Context privileged	false
overridesExporter.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
overridesExporter.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
overridesExporter.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
overridesExporter.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
overridesExporter.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
overridesExporter.automountServiceAccountToken	Mount Service Account token in pod	false
overridesExporter.hostAliases	ingester pods host aliases	[]
overridesExporter.podLabels	Extra labels for ingester pods	{}
overridesExporter.podAnnotations	Annotations for ingester pods	{}
overridesExporter.podAffinityPreset	Pod affinity preset. Ignored if overridesExporter.affinity is set. Allowed values: soft or hard	""
overridesExporter.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if overridesExporter.affinity is set. Allowed values: soft or hard	soft
overridesExporter.nodeAffinityPreset.type	Node affinity preset type. Ignored if overridesExporter.affinity is set. Allowed values: soft or hard	""
overridesExporter.nodeAffinityPreset.key	Node label key to match. Ignored if overridesExporter.affinity is set	""
overridesExporter.nodeAffinityPreset.values	Node label values to match. Ignored if overridesExporter.affinity is set	[]
overridesExporter.affinity	Affinity for Overrides Exporter pods assignment	{}
overridesExporter.nodeSelector	Node labels for Overrides Exporter pods assignment	{}
overridesExporter.tolerations	Tolerations for Overrides Exporter pods assignment	[]
overridesExporter.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
overridesExporter.priorityClassName	Overrides Exporter pods’ priorityClassName	""
overridesExporter.schedulerName	Kubernetes pod scheduler registry	""
overridesExporter.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
overridesExporter.updateStrategy.type	Overrides Exporter statefulset strategy type	RollingUpdate
overridesExporter.updateStrategy.rollingUpdate	Overrides Exporter statefulset rolling update configuration parameters	{}
overridesExporter.extraVolumes	Optionally specify extra list of additional volumes for the Overrides Exporter pod(s)	[]
overridesExporter.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Overrides Exporter container(s)	[]
overridesExporter.sidecars	Add additional sidecar containers to the Overrides Exporter pod(s)	[]
overridesExporter.initContainers	Add additional init containers to the Overrides Exporter pod(s)	[]

Overrides Exporter Traffic Exposure Parameters

Name	Description	Value
overridesExporter.service.type	Overrides Exporter service type	ClusterIP
overridesExporter.service.ports.http	Overrides Exporter HTTP service port	8080
overridesExporter.service.ports.grpc	Overrides Exporter GRPC service port	9095
overridesExporter.service.nodePorts.http	Node port for HTTP	""
overridesExporter.service.nodePorts.grpc	Node port for GRPC	9095
overridesExporter.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
overridesExporter.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
overridesExporter.service.clusterIP	Overrides Exporter service Cluster IP	""
overridesExporter.service.loadBalancerIP	Overrides Exporter service Load Balancer IP	""
overridesExporter.service.loadBalancerSourceRanges	Overrides Exporter service Load Balancer sources	[]
overridesExporter.service.externalTrafficPolicy	Overrides Exporter service external traffic policy	Cluster
overridesExporter.service.annotations	Additional custom annotations for Overrides Exporter service	{}
overridesExporter.service.extraPorts	Extra ports to expose in the Overrides Export service	[]
overridesExporter.service.headless.annotations	Annotations for the headless service.	{}
overridesExporter.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
overridesExporter.networkPolicy.allowExternal	Don’t require server label for connections	true
overridesExporter.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
overridesExporter.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
overridesExporter.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
overridesExporter.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
overridesExporter.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
overridesExporter.pdb.create	Enable/disable a Pod Disruption Budget creation	true
overridesExporter.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
overridesExporter.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Querier Deployment Parameters

Name	Description	Value
querier.extraEnvVars	Array with extra environment variables to add to querier nodes	[]
querier.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for querier nodes	""
querier.extraEnvVarsSecret	Name of existing Secret containing extra env vars for querier nodes	""
querier.command	Override default container command (useful when using custom images)	[]
querier.args	Override default container args (useful when using custom images)	[]
querier.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
querier.replicaCount	Number of Querier replicas to deploy	1
querier.livenessProbe.enabled	Enable livenessProbe on Querier nodes	true
querier.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
querier.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
querier.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
querier.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
querier.livenessProbe.successThreshold	Success threshold for livenessProbe	1
querier.readinessProbe.enabled	Enable readinessProbe on Querier nodes	true
querier.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
querier.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
querier.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
querier.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
querier.readinessProbe.successThreshold	Success threshold for readinessProbe	1
querier.startupProbe.enabled	Enable startupProbe on Querier containers	false
querier.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
querier.startupProbe.periodSeconds	Period seconds for startupProbe	10
querier.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
querier.startupProbe.failureThreshold	Failure threshold for startupProbe	15
querier.startupProbe.successThreshold	Success threshold for startupProbe	1
querier.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
querier.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
querier.customStartupProbe	Custom startupProbe that overrides the default one	{}
querier.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if querier.resources is set (querier.resources is recommended for production).	nano
querier.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
querier.podSecurityContext.enabled	Enabled Querier pods’ Security Context	true
querier.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
querier.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
querier.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
querier.podSecurityContext.fsGroup	Set Querier pod’s Security Context fsGroup	1001
querier.containerSecurityContext.enabled	Enabled containers’ Security Context	true
querier.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
querier.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
querier.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
querier.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
querier.containerSecurityContext.privileged	Set container’s Security Context privileged	false
querier.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
querier.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
querier.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
querier.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
querier.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
querier.automountServiceAccountToken	Mount Service Account token in pod	false
querier.hostAliases	ingester pods host aliases	[]
querier.podLabels	Extra labels for ingester pods	{}
querier.podAnnotations	Annotations for ingester pods	{}
querier.podAffinityPreset	Pod affinity preset. Ignored if querier.affinity is set. Allowed values: soft or hard	""
querier.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if querier.affinity is set. Allowed values: soft or hard	soft
querier.nodeAffinityPreset.type	Node affinity preset type. Ignored if querier.affinity is set. Allowed values: soft or hard	""
querier.nodeAffinityPreset.key	Node label key to match. Ignored if querier.affinity is set	""
querier.nodeAffinityPreset.values	Node label values to match. Ignored if querier.affinity is set	[]
querier.affinity	Affinity for Querier pods assignment	{}
querier.nodeSelector	Node labels for Querier pods assignment	{}
querier.tolerations	Tolerations for Querier pods assignment	[]
querier.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
querier.priorityClassName	Querier pods’ priorityClassName	""
querier.schedulerName	Kubernetes pod scheduler registry	""
querier.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
querier.updateStrategy.type	Querier statefulset strategy type	RollingUpdate
querier.updateStrategy.rollingUpdate	Querier statefulset rolling update configuration parameters	{}
querier.extraVolumes	Optionally specify extra list of additional volumes for the Querier pod(s)	[]
querier.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Querier container(s)	[]
querier.sidecars	Add additional sidecar containers to the Querier pod(s)	[]
querier.initContainers	Add additional init containers to the Querier pod(s)	[]

Querier Traffic Exposure Parameters

Name	Description	Value
querier.service.type	Querier service type	ClusterIP
querier.service.ports.http	Querier HTTP service port	8080
querier.service.ports.grpc	Querier GRPC service port	9095
querier.service.nodePorts.http	Node port for HTTP	""
querier.service.nodePorts.grpc	Node port for GRPC	9095
querier.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
querier.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
querier.service.clusterIP	Querier service Cluster IP	""
querier.service.loadBalancerIP	Querier service Load Balancer IP	""
querier.service.loadBalancerSourceRanges	Querier service Load Balancer sources	[]
querier.service.externalTrafficPolicy	Querier service external traffic policy	Cluster
querier.service.annotations	Additional custom annotations for Querier service	{}
querier.service.extraPorts	Extra ports to expose in the Querier service	[]
querier.service.headless.annotations	Annotations for the headless service.	{}
querier.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
querier.networkPolicy.allowExternal	Don’t require server label for connections	true
querier.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
querier.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
querier.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
querier.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
querier.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
querier.pdb.create	Enable/disable a Pod Disruption Budget creation	true
querier.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
querier.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Query Frontend Deployment Parameters

Name	Description	Value
queryFrontend.extraEnvVars	Array with extra environment variables to add to ingester nodes	[]
queryFrontend.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for ingester nodes	""
queryFrontend.extraEnvVarsSecret	Name of existing Secret containing extra env vars for ingester nodes	""
queryFrontend.command	Override default container command (useful when using custom images)	[]
queryFrontend.args	Override default container args (useful when using custom images)	[]
queryFrontend.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
queryFrontend.replicaCount	Number of Query Frontend replicas to deploy	1
queryFrontend.livenessProbe.enabled	Enable livenessProbe on Query Frontend nodes	true
queryFrontend.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
queryFrontend.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryFrontend.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
queryFrontend.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
queryFrontend.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryFrontend.readinessProbe.enabled	Enable readinessProbe on Query Frontend nodes	true
queryFrontend.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
queryFrontend.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryFrontend.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
queryFrontend.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
queryFrontend.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryFrontend.startupProbe.enabled	Enable startupProbe on Query Frontend containers	false
queryFrontend.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
queryFrontend.startupProbe.periodSeconds	Period seconds for startupProbe	10
queryFrontend.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
queryFrontend.startupProbe.failureThreshold	Failure threshold for startupProbe	15
queryFrontend.startupProbe.successThreshold	Success threshold for startupProbe	1
queryFrontend.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
queryFrontend.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
queryFrontend.customStartupProbe	Custom startupProbe that overrides the default one	{}
queryFrontend.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if queryFrontend.resources is set (queryFrontend.resources is recommended for production).	nano
queryFrontend.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
queryFrontend.podSecurityContext.enabled	Enabled Query Frontend pods’ Security Context	true
queryFrontend.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
queryFrontend.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
queryFrontend.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
queryFrontend.podSecurityContext.fsGroup	Set Query Frontend pod’s Security Context fsGroup	1001
queryFrontend.containerSecurityContext.enabled	Enabled containers’ Security Context	true
queryFrontend.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
queryFrontend.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
queryFrontend.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
queryFrontend.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
queryFrontend.containerSecurityContext.privileged	Set container’s Security Context privileged	false
queryFrontend.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
queryFrontend.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
queryFrontend.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
queryFrontend.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
queryFrontend.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
queryFrontend.automountServiceAccountToken	Mount Service Account token in pod	false
queryFrontend.hostAliases	ingester pods host aliases	[]
queryFrontend.podLabels	Extra labels for ingester pods	{}
queryFrontend.podAnnotations	Annotations for ingester pods	{}
queryFrontend.podAffinityPreset	Pod affinity preset. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	""
queryFrontend.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	soft
queryFrontend.nodeAffinityPreset.type	Node affinity preset type. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	""
queryFrontend.nodeAffinityPreset.key	Node label key to match. Ignored if queryFrontend.affinity is set	""
queryFrontend.nodeAffinityPreset.values	Node label values to match. Ignored if queryFrontend.affinity is set	[]
queryFrontend.affinity	Affinity for Query Frontend pods assignment	{}
queryFrontend.nodeSelector	Node labels for Query Frontend pods assignment	{}
queryFrontend.tolerations	Tolerations for Query Frontend pods assignment	[]
queryFrontend.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
queryFrontend.priorityClassName	Query Frontend pods’ priorityClassName	""
queryFrontend.schedulerName	Kubernetes pod scheduler registry	""
queryFrontend.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
queryFrontend.updateStrategy.type	Query Frontend statefulset strategy type	RollingUpdate
queryFrontend.updateStrategy.rollingUpdate	Query Frontend statefulset rolling update configuration parameters	{}
queryFrontend.extraVolumes	Optionally specify extra list of additional volumes for the Query Frontend pod(s)	[]
queryFrontend.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Query Frontend container(s)	[]
queryFrontend.sidecars	Add additional sidecar containers to the Query Frontend pod(s)	[]
queryFrontend.initContainers	Add additional init containers to the Query Frontend pod(s)	[]

Query Frontend Traffic Exposure Parameters

Name	Description	Value
queryFrontend.service.type	Query Frontend service type	ClusterIP
queryFrontend.service.ports.http	Query Frontend HTTP service port	8080
queryFrontend.service.ports.grpc	Query Frontend GRPC service port	9095
queryFrontend.service.nodePorts.http	Node port for HTTP	""
queryFrontend.service.nodePorts.grpc	Node port for GRPC	9095
queryFrontend.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
queryFrontend.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
queryFrontend.service.clusterIP	Query Frontend service Cluster IP	""
queryFrontend.service.loadBalancerIP	Query Frontend service Load Balancer IP	""
queryFrontend.service.loadBalancerSourceRanges	Query Frontend service Load Balancer sources	[]
queryFrontend.service.externalTrafficPolicy	Query Frontend service external traffic policy	Cluster
queryFrontend.service.annotations	Additional custom annotations for Query Frontend service	{}
queryFrontend.service.extraPorts	Extra ports to expose in the Query Frontend service	[]
queryFrontend.service.headless.annotations	Annotations for the headless service.	{}
queryFrontend.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
queryFrontend.networkPolicy.allowExternal	Don’t require server label for connections	true
queryFrontend.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
queryFrontend.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
queryFrontend.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
queryFrontend.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
queryFrontend.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
queryFrontend.pdb.create	Enable/disable a Pod Disruption Budget creation	true
queryFrontend.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
queryFrontend.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
queryScheduler.enabled	Enable query-scheduler deployment	false
queryScheduler.extraEnvVars	Array with extra environment variables to add to query-scheduler nodes	[]
queryScheduler.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for query-scheduler nodes	""
queryScheduler.extraEnvVarsSecret	Name of existing Secret containing extra env vars for query-scheduler nodes	""
queryScheduler.command	Override default container command (useful when using custom images)	[]
queryScheduler.args	Override default container args (useful when using custom images)	[]
queryScheduler.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
queryScheduler.replicaCount	Number of Query Scheduler replicas to deploy	1
queryScheduler.livenessProbe.enabled	Enable livenessProbe on Query Scheduler nodes	true
queryScheduler.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
queryScheduler.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryScheduler.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
queryScheduler.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
queryScheduler.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryScheduler.readinessProbe.enabled	Enable readinessProbe on Query Scheduler nodes	true
queryScheduler.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
queryScheduler.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryScheduler.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
queryScheduler.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
queryScheduler.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryScheduler.startupProbe.enabled	Enable startupProbe on Query Scheduler containers	false
queryScheduler.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
queryScheduler.startupProbe.periodSeconds	Period seconds for startupProbe	10
queryScheduler.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
queryScheduler.startupProbe.failureThreshold	Failure threshold for startupProbe	15
queryScheduler.startupProbe.successThreshold	Success threshold for startupProbe	1
queryScheduler.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
queryScheduler.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
queryScheduler.customStartupProbe	Custom startupProbe that overrides the default one	{}
queryScheduler.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if queryScheduler.resources is set (queryScheduler.resources is recommended for production).	nano
queryScheduler.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
queryScheduler.podSecurityContext.enabled	Enabled Query Scheduler pods’ Security Context	true
queryScheduler.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
queryScheduler.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
queryScheduler.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
queryScheduler.podSecurityContext.fsGroup	Set Query Scheduler pod’s Security Context fsGroup	1001
queryScheduler.containerSecurityContext.enabled	Enabled containers’ Security Context	true
queryScheduler.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
queryScheduler.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
queryScheduler.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
queryScheduler.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
queryScheduler.containerSecurityContext.privileged	Set container’s Security Context privileged	false
queryScheduler.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
queryScheduler.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
queryScheduler.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
queryScheduler.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
queryScheduler.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
queryScheduler.automountServiceAccountToken	Mount Service Account token in pod	false
queryScheduler.hostAliases	ingester pods host aliases	[]
queryScheduler.podLabels	Extra labels for ingester pods	{}
queryScheduler.podAnnotations	Annotations for ingester pods	{}
queryScheduler.podAffinityPreset	Pod affinity preset. Ignored if queryScheduler.affinity is set. Allowed values: soft or hard	""
queryScheduler.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if queryScheduler.affinity is set. Allowed values: soft or hard	soft
queryScheduler.nodeAffinityPreset.type	Node affinity preset type. Ignored if queryScheduler.affinity is set. Allowed values: soft or hard	""
queryScheduler.nodeAffinityPreset.key	Node label key to match. Ignored if queryScheduler.affinity is set	""
queryScheduler.nodeAffinityPreset.values	Node label values to match. Ignored if queryScheduler.affinity is set	[]
queryScheduler.affinity	Affinity for Query Scheduler pods assignment	{}
queryScheduler.nodeSelector	Node labels for Query Scheduler pods assignment	{}
queryScheduler.tolerations	Tolerations for Query Scheduler pods assignment	[]
queryScheduler.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
queryScheduler.priorityClassName	Query Scheduler pods’ priorityClassName	""
queryScheduler.schedulerName	Kubernetes pod scheduler registry	""
queryScheduler.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
queryScheduler.updateStrategy.type	Query Scheduler statefulset strategy type	RollingUpdate
queryScheduler.updateStrategy.rollingUpdate	Query Scheduler statefulset rolling update configuration parameters	{}
queryScheduler.extraVolumes	Optionally specify extra list of additional volumes for the Query Scheduler pod(s)	[]
queryScheduler.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Query Scheduler container(s)	[]
queryScheduler.sidecars	Add additional sidecar containers to the Query Scheduler pod(s)	[]
queryScheduler.initContainers	Add additional init containers to the Query Scheduler pod(s)	[]

Query Scheduler Traffic Exposure Parameters

Name	Description	Value
queryScheduler.service.type	Query Scheduler service type	ClusterIP
queryScheduler.service.ports.http	Query Scheduler HTTP service port	8080
queryScheduler.service.ports.grpc	Query Scheduler GRPC service port	9095
queryScheduler.service.nodePorts.http	Node port for HTTP	""
queryScheduler.service.nodePorts.grpc	Node port for GRPC	9095
queryScheduler.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
queryScheduler.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
queryScheduler.service.clusterIP	Query Scheduler service Cluster IP	""
queryScheduler.service.loadBalancerIP	Query Scheduler service Load Balancer IP	""
queryScheduler.service.loadBalancerSourceRanges	Query Scheduler service Load Balancer sources	[]
queryScheduler.service.externalTrafficPolicy	Query Scheduler service external traffic policy	Cluster
queryScheduler.service.annotations	Additional custom annotations for Query Scheduler service	{}
queryScheduler.service.extraPorts	Extra ports to expose in the Query Scheduler service	[]
queryScheduler.service.headless.annotations	Annotations for the headless service.	{}
queryScheduler.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
queryScheduler.networkPolicy.allowExternal	Don’t require server label for connections	true
queryScheduler.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
queryScheduler.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
queryScheduler.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
queryScheduler.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
queryScheduler.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
queryScheduler.pdb.create	Enable/disable a Pod Disruption Budget creation	true
queryScheduler.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
queryScheduler.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Store Gateway Deployment Parameters

Name	Description	Value
storeGateway.extraEnvVars	Array with extra environment variables to add to ingester nodes	[]
storeGateway.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for ingester nodes	""
storeGateway.extraEnvVarsSecret	Name of existing Secret containing extra env vars for ingester nodes	""
storeGateway.command	Override default container command (useful when using custom images)	[]
storeGateway.args	Override default container args (useful when using custom images)	[]
storeGateway.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
storeGateway.replicaCount	Number of Store Gateway replicas to deploy	1
storeGateway.podManagementPolicy	Statefulset Pod management policy, it needs to be Parallel to be able to complete the cluster join	OrderedReady
storeGateway.livenessProbe.enabled	Enable livenessProbe on Store Gateway nodes	true
storeGateway.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	60
storeGateway.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
storeGateway.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
storeGateway.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
storeGateway.livenessProbe.successThreshold	Success threshold for livenessProbe	1
storeGateway.readinessProbe.enabled	Enable readinessProbe on Store Gateway nodes	true
storeGateway.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	60
storeGateway.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
storeGateway.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
storeGateway.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
storeGateway.readinessProbe.successThreshold	Success threshold for readinessProbe	1
storeGateway.startupProbe.enabled	Enable startupProbe on Store Gateway containers	false
storeGateway.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
storeGateway.startupProbe.periodSeconds	Period seconds for startupProbe	10
storeGateway.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
storeGateway.startupProbe.failureThreshold	Failure threshold for startupProbe	15
storeGateway.startupProbe.successThreshold	Success threshold for startupProbe	1
storeGateway.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
storeGateway.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
storeGateway.customStartupProbe	Custom startupProbe that overrides the default one	{}
storeGateway.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if storeGateway.resources is set (storeGateway.resources is recommended for production).	nano
storeGateway.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
storeGateway.podSecurityContext.enabled	Enabled Store Gateway pods’ Security Context	true
storeGateway.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
storeGateway.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
storeGateway.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
storeGateway.podSecurityContext.fsGroup	Set Store Gateway pod’s Security Context fsGroup	1001
storeGateway.containerSecurityContext.enabled	Enabled containers’ Security Context	true
storeGateway.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
storeGateway.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
storeGateway.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
storeGateway.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
storeGateway.containerSecurityContext.privileged	Set container’s Security Context privileged	false
storeGateway.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
storeGateway.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
storeGateway.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
storeGateway.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
storeGateway.lifecycleHooks	for the ingester container(s) to automate configuration before or after startup	{}
storeGateway.automountServiceAccountToken	Mount Service Account token in pod	false
storeGateway.hostAliases	ingester pods host aliases	[]
storeGateway.podLabels	Extra labels for ingester pods	{}
storeGateway.podAnnotations	Annotations for ingester pods	{}
storeGateway.podAffinityPreset	Pod affinity preset. Ignored if storeGateway.affinity is set. Allowed values: soft or hard	""
storeGateway.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if storeGateway.affinity is set. Allowed values: soft or hard	soft
storeGateway.nodeAffinityPreset.type	Node affinity preset type. Ignored if storeGateway.affinity is set. Allowed values: soft or hard	""
storeGateway.nodeAffinityPreset.key	Node label key to match. Ignored if storeGateway.affinity is set	""
storeGateway.nodeAffinityPreset.values	Node label values to match. Ignored if storeGateway.affinity is set	[]
storeGateway.affinity	Affinity for Store Gateway pods assignment	{}
storeGateway.nodeSelector	Node labels for Store Gateway pods assignment	{}
storeGateway.tolerations	Tolerations for Store Gateway pods assignment	[]
storeGateway.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
storeGateway.priorityClassName	Store Gateway pods’ priorityClassName	""
storeGateway.schedulerName	Kubernetes pod scheduler registry	""
storeGateway.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
storeGateway.updateStrategy.type	Store Gateway statefulset strategy type	RollingUpdate
storeGateway.updateStrategy.rollingUpdate	Store Gateway statefulset rolling update configuration parameters	{}
storeGateway.extraVolumes	Optionally specify extra list of additional volumes for the Store Gateway pod(s)	[]
storeGateway.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Store Gateway container(s)	[]
storeGateway.sidecars	Add additional sidecar containers to the Store Gateway pod(s)	[]
storeGateway.initContainers	Add additional init containers to the Store Gateway pod(s)	[]
storeGateway.persistence.enabled	Enable persistence in Store Gateway instances	true
storeGateway.persistence.existingClaim	Name of an existing PVC to use	""
storeGateway.persistence.storageClass	PVC Storage Class for Store Gateway data volume	""
storeGateway.persistence.accessModes	PVC Access modes	["ReadWriteOnce"]
storeGateway.persistence.size	PVC Storage Request for Store Gateway data volume	8Gi
storeGateway.persistence.annotations	Additional PVC annotations	{}
storeGateway.persistence.selector	Selector to match an existing Persistent Volume for Store Gateway’s data PVC	{}
storeGateway.persistence.dataSource	PVC data source	{}

Store Gateway Traffic Exposure Parameters

Name	Description	Value
storeGateway.service.type	Store Gateway service type	ClusterIP
storeGateway.service.ports.http	Store Gateway HTTP service port	8080
storeGateway.service.ports.grpc	Store Gateway GRPC service port	9095
storeGateway.service.nodePorts.http	Node port for HTTP	""
storeGateway.service.nodePorts.grpc	Node port for GRPC	9095
storeGateway.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
storeGateway.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
storeGateway.service.clusterIP	Store Gateway service Cluster IP	""
storeGateway.service.loadBalancerIP	Store Gateway service Load Balancer IP	""
storeGateway.service.loadBalancerSourceRanges	Store Gateway service Load Balancer sources	[]
storeGateway.service.externalTrafficPolicy	Store Gateway service external traffic policy	Cluster
storeGateway.service.annotations	Additional custom annotations for Store Gateway service	{}
storeGateway.service.extraPorts	Extra ports to expose in the Store Gateway service	[]
storeGateway.service.headless.annotations	Annotations for the headless service.	{}
storeGateway.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
storeGateway.networkPolicy.allowExternal	Don’t require server label for connections	true
storeGateway.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
storeGateway.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
storeGateway.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
storeGateway.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
storeGateway.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
storeGateway.pdb.create	Enable/disable a Pod Disruption Budget creation	true
storeGateway.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
storeGateway.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Ruler Deployment Parameters

Name	Description	Value
ruler.enabled	Deploy ruler component	false
ruler.extraEnvVars	Array with extra environment variables to add to ruler nodes	[]
ruler.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for ruler nodes	""
ruler.extraEnvVarsSecret	Name of existing Secret containing extra env vars for ruler nodes	""
ruler.command	Override default container command (useful when using custom images)	[]
ruler.args	Override default container args (useful when using custom images)	[]
ruler.extraArgs	Add additional args to the default container args (useful to override configuration)	[]
ruler.podManagementPolicy	podManagementPolicy to manage scaling operation	""
ruler.replicaCount	Number of Ruler replicas to deploy	1
ruler.livenessProbe.enabled	Enable livenessProbe on Ruler nodes	true
ruler.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	10
ruler.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
ruler.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	1
ruler.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
ruler.livenessProbe.successThreshold	Success threshold for livenessProbe	1
ruler.readinessProbe.enabled	Enable readinessProbe on Ruler nodes	true
ruler.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
ruler.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
ruler.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
ruler.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
ruler.readinessProbe.successThreshold	Success threshold for readinessProbe	1
ruler.startupProbe.enabled	Enable startupProbe on Ruler containers	false
ruler.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
ruler.startupProbe.periodSeconds	Period seconds for startupProbe	10
ruler.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
ruler.startupProbe.failureThreshold	Failure threshold for startupProbe	15
ruler.startupProbe.successThreshold	Success threshold for startupProbe	1
ruler.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
ruler.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
ruler.customStartupProbe	Custom startupProbe that overrides the default one	{}
ruler.lifecycleHooks	for the ruler container(s) to automate configuration before or after startup	{}
ruler.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if ruler.resources is set (ruler.resources is recommended for production).	nano
ruler.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
ruler.podSecurityContext.enabled	Enabled Ruler pods’ Security Context	true
ruler.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
ruler.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
ruler.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
ruler.podSecurityContext.fsGroup	Set Ruler pod’s Security Context fsGroup	1001
ruler.containerSecurityContext.enabled	Enabled containers’ Security Context	true
ruler.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
ruler.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
ruler.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
ruler.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
ruler.containerSecurityContext.privileged	Set container’s Security Context privileged	false
ruler.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
ruler.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
ruler.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
ruler.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
ruler.automountServiceAccountToken	Mount Service Account token in pod	false
ruler.hostAliases	ruler pods host aliases	[]
ruler.podLabels	Extra labels for ruler pods	{}
ruler.podAnnotations	Annotations for ruler pods	{}
ruler.podAffinityPreset	Pod affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	""
ruler.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	soft
ruler.nodeAffinityPreset.type	Node affinity preset type. Ignored if ruler.affinity is set. Allowed values: soft or hard	""
ruler.nodeAffinityPreset.key	Node label key to match. Ignored if ruler.affinity is set	""
ruler.nodeAffinityPreset.values	Node label values to match. Ignored if ruler.affinity is set	[]
ruler.affinity	Affinity for ruler pods assignment	{}
ruler.nodeSelector	Node labels for Ruler pods assignment	{}
ruler.tolerations	Tolerations for Ruler pods assignment	[]
ruler.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
ruler.priorityClassName	Ruler pods’ priorityClassName	""
ruler.schedulerName	Kubernetes pod scheduler registry	""
ruler.terminationGracePeriodSeconds	Seconds pod needs to terminate gracefully	""
ruler.updateStrategy.type	Ruler statefulset strategy type	RollingUpdate
ruler.updateStrategy.rollingUpdate	Ruler statefulset rolling update configuration parameters	{}
ruler.extraVolumes	Optionally specify extra list of additional volumes for the Ruler pod(s)	[]
ruler.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the ruler container(s)	[]
ruler.sidecars	Add additional sidecar containers to the Ruler pod(s)	[]
ruler.initContainers	Add additional init containers to the Ruler pod(s)	[]

Ruler Persistence Parameters

Name	Description	Value
ruler.persistence.enabled	Enable persistence in Ruler instances	true
ruler.persistence.storageClass	PVC Storage Class for Ruler data volume	""
ruler.persistence.accessModes	PVC Access modes	["ReadWriteOnce"]
ruler.persistence.size	PVC Storage Request for Ruler data volume	8Gi
ruler.persistence.annotations	Additional PVC annotations	{}
ruler.persistence.selector	Selector to match an existing Persistent Volume for Ruler’s data PVC	{}

Ruler Traffic Exposure Parameters

Name	Description	Value
ruler.service.type	Ruler service type	ClusterIP
ruler.service.ports.http	Ruler HTTP service port	8080
ruler.service.ports.grpc	Ruler GRPC service port	9095
ruler.service.nodePorts.http	Node port for HTTP	""
ruler.service.nodePorts.grpc	Node port for GRPC	""
ruler.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
ruler.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
ruler.service.clusterIP	Ruler service Cluster IP	""
ruler.service.loadBalancerIP	Ruler service Load Balancer IP	""
ruler.service.loadBalancerSourceRanges	Ruler service Load Balancer sources	[]
ruler.service.externalTrafficPolicy	Ruler service external traffic policy	Cluster
ruler.service.annotations	Additional custom annotations for Ruler service	{}
ruler.service.extraPorts	Extra ports to expose in the Ruler service	[]
ruler.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
ruler.networkPolicy.allowExternal	Don’t require server label for connections	true
ruler.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
ruler.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
ruler.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
ruler.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
ruler.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
ruler.pdb.create	Enable/disable a Pod Disruption Budget creation	true
ruler.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
ruler.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
ruler.blockStorage.backend	Backend storage to use. NOTE: if minio.enable == true, this configuration will be ignored.	s3
ruler.blockStorage.config	Configures connection to the backend store. NOTE: if minio.enable == true, this configuration will be ignored.	{}

Init Container Parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup	false
volumePermissions.image.registry	OS Shell + Utility image registry	REGISTRY_NAME
volumePermissions.image.repository	OS Shell + Utility image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.pullPolicy	OS Shell + Utility image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	OS Shell + Utility image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volumePermissions.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
volumePermissions.containerSecurityContext.runAsUser	Set init container’s Security Context runAsUser	0

Other Parameters

Name	Description	Value
rbac.create	Specifies whether RBAC resources should be created	false
rbac.rules	Custom RBAC rules to set	[]
serviceAccount.create	Specifies whether a ServiceAccount should be created	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
metrics.enabled	Enable the export of Prometheus metrics	false
metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
metrics.serviceMonitor.relabelings	Specify general relabeling	[]
metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
minio	For full list of MinIO® values configurations please refere here
minio.enabled	Enable/disable MinIO® chart installation	true
minio.auth.rootUser	MinIO® root username	admin
minio.auth.rootPassword	Password for MinIO® root user	""
minio.auth.existingSecret	Name of an existing secret containing the MinIO® credentials	""
minio.defaultBuckets	Comma, semi-colon or space separated list of MinIO® buckets to create	mimir, ruler, alertmanager
minio.provisioning.enabled	Enable/disable MinIO® provisioning job	true
minio.provisioning.extraCommands	Extra commands to run on MinIO® provisioning job	["mc anonymous set download provisioning/mimir","mc anonymous set download provisioning/ruler","mc anonymous set download provisioning/alertmanager"]
minio.tls.enabled	Enable/disable MinIO® TLS support	false
minio.service.type	MinIO® service type	ClusterIP
minio.service.loadBalancerIP	MinIO® service LoadBalancer IP	""
minio.service.ports.api	MinIO® service port	80
minio.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	micro
minio.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

External Memcached (Chunks) Parameters

Name	Description	Value
externalMemcachedChunks.host	Host of a running external memcached instance	""
externalMemcachedChunks.port	Port of a running external memcached instance	11211

Memcached Sub-chart Parameters (Chunks)

Name	Description	Value
memcachedchunks.enabled	Deploy memcached sub-chart	true
memcachedchunks.image.registry	Memcached image registry	REGISTRY_NAME
memcachedchunks.image.repository	Memcached image repository	REPOSITORY_NAME/memcached
memcachedchunks.image.digest	Memcached image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
memcachedchunks.nameOverride	override the subchart name	""
memcachedchunks.architecture	Memcached architecture	high-availability
memcachedchunks.service.ports.memcached	Memcached service port	11211
memcachedchunks.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	nano
memcachedchunks.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

External Memcached (Frontend) Parameters

Name	Description	Value
externalMemcachedFrontend.host	Host of a running external memcached instance	""
externalMemcachedFrontend.port	Port of a running external memcached instance	11211

Memcached Sub-chart Parameters (Frontend)

Name	Description	Value
memcachedfrontend.enabled	Deploy memcached sub-chart	true
memcachedfrontend.image.registry	Memcached image registry	REGISTRY_NAME
memcachedfrontend.image.repository	Memcached image repository	REPOSITORY_NAME/memcached
memcachedfrontend.image.digest	Memcached image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
memcachedfrontend.architecture	Memcached architecture	high-availability
memcachedfrontend.nameOverride	override the subchart name	""
memcachedfrontend.service.ports.memcached	Memcached service port	11211
memcachedfrontend.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	nano
memcachedfrontend.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

External Memcached (Index) Parameters

Name	Description	Value
externalMemcachedIndex.host	Host of a running external memcached instance	""
externalMemcachedIndex.port	Port of a running external memcached instance	11211

Memcached Sub-chart Parameters (Index)

Name	Description	Value
memcachedindex.enabled	Deploy memcached sub-chart	true
memcachedindex.image.registry	Memcached image registry	REGISTRY_NAME
memcachedindex.image.repository	Memcached image repository	REPOSITORY_NAME/memcached
memcachedindex.image.digest	Memcached image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
memcachedindex.architecture	Memcached architecture	high-availability
memcachedindex.nameOverride	override the subchart name	""
memcachedindex.service.ports.memcached	Memcached service port	11211
memcachedindex.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	nano
memcachedindex.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

External Memcached (Metadata) Parameters

Name	Description	Value
externalMemcachedMetadata.host	Host of a running external memcached instance	""
externalMemcachedMetadata.port	Port of a running external memcached instance	11211

Memcached Sub-chart Parameters (Metadata)

Name	Description	Value
memcachedmetadata.enabled	Deploy memcached sub-chart	true
memcachedmetadata.image.registry	Memcached image registry	REGISTRY_NAME
memcachedmetadata.image.repository	Memcached image repository	REPOSITORY_NAME/memcached
memcachedmetadata.image.digest	Memcached image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
memcachedmetadata.architecture	Memcached architecture	high-availability
memcachedmetadata.nameOverride	override the subchart name	""
memcachedmetadata.service.ports.memcached	Memcached service port	11211
memcachedmetadata.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	nano
memcachedmetadata.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

See https://github.com/bitnami/readme-generator-for-helm to create the table

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set mimir.image.debug=true \
  oci://REGISTRY_NAME/REPOSITORY_NAME/grafana-mimir

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command enables the debug mode in the image.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/grafana-mimir

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml as starting point.

Once the chart is installed the remote write endpoints for Prometheus or Grafana Agent and the read address to be used as datasource in Grafana will be printed. Example:

    Remote write endpoints for Prometheus or Grafana Agent:
      http://grafana-mimir-gateway.default.svc.cluster.local/api/v1/push
    Read address, Grafana data source (Prometheus) URL:
      http://grafana-mimir-gateway.default.svc.cluster.local/prometheus

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 1.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.