Bitnami package for Jenkins

Jenkins is an open source Continuous Integration and Continuous Delivery (CI/CD) server designed to automate the building, testing, and deploying of any software project.

Overview of Jenkins

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Jenkins deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy Jenkins on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling vs Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Configure Ingress

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.To enable Ingress integration, set ingress.enabled to true.

The most common scenario is to have one host name mapped to the deployment. In this case, the ingress.hostname property can be used to set the host name. The ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.

NOTE: For each host specified in the ingress.extraHosts parameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers.

Configure TLS Secrets for use with Ingress

This chart facilitates the creation of TLS secrets for use with the Ingress controller (although this is not mandatory). There are several common use cases:

• Generate certificate secrets based on chart parameters.
• Enable externally generated certificates.
• Manage application certificates via an external service (like cert-manager).
• Create self-signed certificates within the chart (if supported).

In the first two cases, a certificate and a key are needed. Files are expected in .pem format.

Here is an example of a certificate file:

NOTE: There may be more than one certificate if there is a certificate chain.

-----BEGIN CERTIFICATE-----
MIID6TCCAtGgAwIBAgIJAIaCwivkeB5EMA0GCSqGSIb3DQEBCwUAMFYxCzAJBgNV
...
jScrvkiBO65F46KioCL9h5tDvomdU1aqpI/CBzhvZn1c0ZTf87tGQR8NK7v7
-----END CERTIFICATE-----

Here is an example of a certificate key:

-----BEGIN RSA PRIVATE KEY-----
MIIEogIBAAKCAQEAvLYcyu8f3skuRyUgeeNpeDvYBCDcgq+LsWap6zbX5f8oLqp4
...
wrj2wDbCDCFmfqnSJ+dKI3vFLlEz44sAV8jX/kd4Y6ZTQhlLbYc=
-----END RSA PRIVATE KEY-----

• If using Helm to manage the certificates based on the parameters, copy these values into the certificate and key values for a given *.ingress.secrets entry.
• If managing TLS secrets separately, it is necessary to create a TLS secret with name INGRESS_HOSTNAME-tls (where INGRESS_HOSTNAME is a placeholder to be replaced with the hostname you set using the *.ingress.hostname parameter).
• If your cluster has a cert-manager add-on to automate the management and issuance of TLS certificates, add to *.ingress.annotations the corresponding ones for cert-manager.
• If using self-signed certificates created by Helm, set both *.ingress.tls and *.ingress.selfSigned to true.

Configure extra environment variables

To add extra environment variables (useful for advanced operations like custom init scripts), use the extraEnvVars property.

extraEnvVars:
  - name: LOG_LEVEL
    value: DEBUG

Alternatively, use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Configure Sidecars and Init Containers

If additional containers are needed in the same pod as Jenkins (such as additional metrics or logging exporters), they can be defined using the sidecars parameter.

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:

service:
  extraPorts:
  - name: extraPort
    port: 11311
    targetPort: 11311

NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the --enable-metrics=true parameter at deployment time. The sidecars parameter should therefore only be used for any extra sidecar containers.

If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Learn more about sidecar containers and init containers.

Deploy extra resources

There are cases where you may want to deploy extra objects, such a ConfigMap containing your app’s configuration or some extra deployment with a micro service used by your app. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter.

Set Pod affinity

This chart allows you to set custom Pod affinity using the XXX.affinity parameter(s). Find more information about Pod affinity in the Kubernetes documentation.

As an alternative, you can use the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami Jenkins image stores the Jenkins data and configurations at the /bitnami/jenkins path of the container. Persistent Volume Claims (PVCs) are used to keep the data across deployments.

If you encounter errors when working with persistent volumes, refer to our troubleshooting guide for persistent volumes. s

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.fullname	""
fullnameOverride	String to fully override common.names.fullname	""
replicaCount	Number of container replicas	1
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployment	["sleep"]
diagnosticMode.args	Args to override all containers in the deployment	["infinity"]

Jenkins Image parameters

Name	Description	Value
image.registry	Jenkins image registry	REGISTRY_NAME
image.repository	Jenkins image repository	REPOSITORY_NAME/jenkins
image.digest	Jenkins image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	Jenkins image pull policy	IfNotPresent
image.pullSecrets	Jenkins image pull secrets	[]
image.debug	Enable image debug mode	false

Jenkins Configuration parameters

Name	Description	Value
jenkinsUser	Jenkins username	user
jenkinsPassword	Jenkins user password	""
jenkinsHost	Jenkins host to create application URLs	""
jenkinsHome	Jenkins home directory	/bitnami/jenkins/home
javaOpts	Custom JVM parameters	[]
disableInitialization	Skip performing the initial bootstrapping for Jenkins	no
command	Override default container command (useful when using custom images)	[]
args	Override default container args (useful when using custom images)	[]
extraEnvVars	Array with extra environment variables to add to the Jenkins container	[]
extraEnvVarsCM	Name of existing ConfigMap containing extra env vars	""
extraEnvVarsSecret	Name of existing Secret containing extra env vars	""
plugins	List of plugins to be installed during Jenkins first boot.	[]
extraPlugins	List of plugins to install in addition to those listed in plugins	[]
latestPlugins	Set to true to download the latest version of all dependencies, even if the version(s) of the requested plugin(s) are not the latest.	true
latestSpecifiedPlugins	Set to true download the latest dependencies of any plugin that is requested to have the latest version.	false
skipImagePlugins	Set this value to true to skip installing plugins stored under /opt/bitnami/jenkins/plugins	false
overridePlugins	Setting this value to true will remove all plugins from the jenkinsHome directory and install new plugins from scratch.	false
overridePaths	Comma-separated list of relative paths to be removed from Jenkins home volume and/or mounted if present in the mounted content dir	""
initScripts	Dictionary of scripts to be mounted at /docker-entrypoint-initdb.d. Evaluated as a template. Allows .sh and .groovy formats.	{}
initScriptsCM	ConfigMap containing the /docker-entrypoint-initdb.d scripts. Evaluated as a template.	""
initScriptsSecret	Secret containing /docker-entrypoint-initdb.d scripts to be executed at initialization time that contain sensitive data. Evaluated as a template.	""
initHookScripts	Dictionary of scripts to be mounted at $JENKINS_HOME/init.groovy.d. Evaluated as a template. Allows .sh and .groovy formats.	{}
initHookScriptsCM	ConfigMap containing the $JENKINS_HOME/init.groovy.d scripts. Evaluated as a template.	""
initHookScriptsSecret	Secret containing $JENKINS_HOME/init.groovy.d scripts to be executed at initialization time that contain sensitive data. Evaluated as a template.	""

Jenkins TLS configuration

Name	Description	Value
tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates.	false
tls.usePemCerts	Use this variable if your secrets contain PEM certificates instead of PKCS12	false
tls.existingSecret	Name of the existing secret containing the ‘jenkins.jks’ keystore, if usePemCerts is enabled, use keys ‘tls.crt’ and ‘tls.key’.	""
tls.password	Password to access the JKS keystore when it is password-protected.	""
tls.passwordsSecret	Name of the existing secret containing the JKS keystore password.	""
tls.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if tls.resources is set (tls.resources is recommended for production).	nano
tls.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

Jenkins Configuration as Code plugin settings (EXPERIMENTAL)

Name	Description	Value
configAsCode.enabled	Enable configuration as code.	false
configAsCode.extraConfigFiles	List of additional configuration-as-code files to be mounted	{}
configAsCode.securityRealm	Content of the ‘securityRealm’ block	{}
configAsCode.authorizationStrategy	Content of the ‘authorizationStrategy’ block	{}
configAsCode.security	Content of the ‘security’ block	{}
configAsCode.extraJenkins	Append additional settings under the ‘jenkins’ block	{}
configAsCode.extraConfig	Append additional settings at the root of the configuration-as-code file	{}
configAsCode.extraKubernetes	Append additional settings under the Kubernetes cloud block	{}
configAsCode.extraClouds	Additional clouds	[]
configAsCode.existingConfigmap	Name of an existing configmap containing the config-as-code files.	""
configAsCode.autoReload.enabled	Enable the creation of the autoReload sidecar container.	true
configAsCode.autoReload.initialDelay	In seconds, time	360
configAsCode.autoReload.reqRetries		12
configAsCode.autoReload.interval		10
configAsCode.autoReload.command		[]
configAsCode.autoReload.args		[]
configAsCode.autoReload.extraEnvVars		[]
configAsCode.autoReload.extraEnvVarsSecret		""
configAsCode.autoReload.extraEnvVarsCM		""
configAsCode.autoReload.extraVolumeMounts		[]
configAsCode.autoReload.containerSecurityContext.enabled	Enabled containers’ Security Context	true
configAsCode.autoReload.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
configAsCode.autoReload.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
configAsCode.autoReload.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
configAsCode.autoReload.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
configAsCode.autoReload.containerSecurityContext.privileged	Set container’s Security Context privileged	false
configAsCode.autoReload.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
configAsCode.autoReload.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
configAsCode.autoReload.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
configAsCode.autoReload.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
configAsCode.autoReload.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if configAsCode.autoReload.resources is set (configAsCode.autoReload.resources is recommended for production).	none
configAsCode.autoReload.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
agent.enabled	Set to true to enable the configuration of Jenkins kubernetes agents	false
agent.image.registry	Jenkins image registry	REGISTRY_NAME
agent.image.repository	Jenkins image repository	REPOSITORY_NAME/jenkins-agent
agent.image.digest	Jenkins image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
agent.image.pullPolicy	Jenkins image pull policy	IfNotPresent
agent.image.pullSecrets	Jenkins image pull secrets	[]
agent.image.debug	Enable image debug mode	false
agent.templateLabel	Label for the Kubernetes agent template	kubernetes-agent
agent.podLabels	Additional pod labels for the Jenkins agent pods	{}
agent.annotations	Additional pod annotations for the Jenkins agent pods	{}
agent.sidecars	Additional sidecar containers for the Jenkins agent pods	[]
agent.command	Override default container command (useful when using custom images)	""
agent.args	Override default container args (useful when using custom images)	""
agent.containerExtraEnvVars	Additional env vars for the Jenkins agent pods	[]
agent.podExtraEnvVars	Additional env vars for the Jenkins agent pods	[]
agent.extraAgentTemplate	Extend the default agent template	{}
agent.extraTemplates	Provide your own custom agent templates	[]
agent.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if agent.resources is set (agent.resources is recommended for production).	small
agent.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
agent.containerSecurityContext.enabled	Enable container security context	false
agent.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
agent.containerSecurityContext.runAsUser	User ID for the agent container	""
agent.containerSecurityContext.runAsGroup	User ID for the agent container	""
agent.containerSecurityContext.privileged	Decide if the container runs privileged.	false

Jenkins deployment parameters

Name	Description	Value
updateStrategy.type	Jenkins deployment strategy type	RollingUpdate
priorityClassName	Jenkins pod priority class name	""
schedulerName	Name of the k8s scheduler (other than default)	""
topologySpreadConstraints	Topology Spread Constraints for pod assignment	[]
automountServiceAccountToken	Mount Service Account token in pod	true
hostAliases	Jenkins pod host aliases	[]
extraVolumes	Optionally specify extra list of additional volumes for Jenkins pods	[]
extraVolumeMounts	Optionally specify extra list of additional volumeMounts for Jenkins container(s)	[]
sidecars	Add additional sidecar containers to the Jenkins pod	[]
initContainers	Add additional init containers to the Jenkins pods	[]
pdb.create	Enable/disable a Pod Disruption Budget creation	true
pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both pdb.minAvailable and pdb.maxUnavailable are empty.	""
lifecycleHooks	Add lifecycle hooks to the Jenkins deployment	{}
podLabels	Extra labels for Jenkins pods	{}
podAnnotations	Annotations for Jenkins pods	{}
podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
nodeAffinityPreset.key	Node label key to match. Ignored if affinity is set	""
nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set	[]
affinity	Affinity for pod assignment	{}
nodeSelector	Node labels for pod assignment	{}
tolerations	Tolerations for pod assignment	[]
resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	medium
resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
containerPorts.http	Jenkins HTTP container port	8080
containerPorts.https	Jenkins HTTPS container port	8443
containerPorts.agentListener	Jenkins agent listener port, ignored if agent.enabled=false	50000
podSecurityContext.enabled	Enabled Jenkins pods’ Security Context	true
podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
podSecurityContext.fsGroup	Set Jenkins pod’s Security Context fsGroup	1001
containerSecurityContext.enabled	Enabled containers’ Security Context	true
containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
containerSecurityContext.privileged	Set container’s Security Context privileged	false
containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
startupProbe.enabled	Enable startupProbe	false
startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	180
startupProbe.periodSeconds	Period seconds for startupProbe	10
startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
startupProbe.failureThreshold	Failure threshold for startupProbe	6
startupProbe.successThreshold	Success threshold for startupProbe	1
livenessProbe.enabled	Enable livenessProbe	true
livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	180
livenessProbe.periodSeconds	Period seconds for livenessProbe	10
livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
livenessProbe.successThreshold	Success threshold for livenessProbe	1
readinessProbe.enabled	Enable readinessProbe	true
readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
readinessProbe.periodSeconds	Period seconds for readinessProbe	5
readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	3
readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
readinessProbe.successThreshold	Success threshold for readinessProbe	1
customStartupProbe	Custom startupProbe that overrides the default one	{}
customLivenessProbe	Custom livenessProbe that overrides the default one	{}
customReadinessProbe	Custom readinessProbe that overrides the default one	{}

Traffic Exposure Parameters

Name	Description	Value
service.type	Jenkins service type	LoadBalancer
service.ports.http	Jenkins service HTTP port	80
service.ports.https	Jenkins service HTTPS port	443
service.nodePorts.http	Node port for HTTP	""
service.nodePorts.https	Node port for HTTPS	""
service.clusterIP	Jenkins service Cluster IP	""
service.loadBalancerIP	Jenkins service Load Balancer IP	""
service.loadBalancerSourceRanges	Jenkins service Load Balancer sources	[]
service.externalTrafficPolicy	Jenkins service external traffic policy	Cluster
service.annotations	Additional custom annotations for Jenkins service	{}
service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
networkPolicy.allowExternal	Don’t require server label for connections	true
networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
networkPolicy.kubeAPIServerPorts	List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)	[]
networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
agentListenerService.enabled		true
agentListenerService.type	Jenkins service type	ClusterIP
agentListenerService.ports.agentListener	Jenkins service agent listener port	50000
agentListenerService.nodePorts.agentListener	Node port for agent listener	""
agentListenerService.clusterIP	Jenkins service Cluster IP	""
agentListenerService.loadBalancerIP	Jenkins service Load Balancer IP	""
agentListenerService.loadBalancerSourceRanges	Jenkins service Load Balancer sources	[]
agentListenerService.externalTrafficPolicy	Jenkins service external traffic policy	Cluster
agentListenerService.annotations	Additional custom annotations for Jenkins service	{}
agentListenerService.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
agentListenerService.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
agentListenerService.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
ingress.enabled	Enable ingress record generation for Jenkins	false
ingress.pathType	Ingress path type	ImplementationSpecific
ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ingress.hostname	Default host for the ingress record	jenkins.local
ingress.path	Default path for the ingress record	/
ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
ingress.secrets	Custom TLS certificates as secrets	[]
ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
ingress.extraRules	Additional rules to be covered with this ingress record	[]

Persistence Parameters

Name	Description	Value
persistence.enabled	Enable persistence using Persistent Volume Claims	true
persistence.storageClass	Persistent Volume storage class	""
persistence.existingClaim	Use a existing PVC which must be created manually before bound	""
persistence.annotations	Additional custom annotations for the PVC	{}
persistence.accessModes	Persistent Volume access modes	[]
persistence.size	Persistent Volume size	8Gi
persistence.selector	Selector to match an existing Persistent Volume for Ingester’s data PVC	{}
volumePermissions.enabled	Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup	false
volumePermissions.image.registry	OS Shell + Utility image registry	REGISTRY_NAME
volumePermissions.image.repository	OS Shell + Utility image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	OS Shell + Utility image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	OS Shell + Utility image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	OS Shell + Utility image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volumePermissions.securityContext.seLinuxOptions	Set SELinux options in container	{}
volumePermissions.securityContext.runAsUser	Set init container’s Security Context runAsUser	0

Other Parameters

Name	Description	Value
rbac.create	Specifies whether RBAC resources should be created	true
rbac.rules	Custom RBAC rules to set	[]
serviceAccount.create	Specifies whether a ServiceAccount should be created	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

The above parameters map to the env variables defined in bitnami/jenkins. For more information please refer to the bitnami/jenkins image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set jenkinsUser=admin \
  --set jenkinsPassword=password \
  oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the Jenkins administrator account username and password to admin and password respectively.

NOTE: Once this chart is deployed, it is not possible to change the application’s access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application’s built-in administrative tools if available.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 13.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 11.0.0

This major release no longer contains preinstalled plugins. In case you want to install a plugin you can follow the official documentation

To 10.0.0

This major release is no longer contains the metrics section because the container bitnami/enkins-exporter has been deprecated due to the upstream project is not maintained.

To 9.0.0

This major release renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repository.

Affected values:

• service.port renamed as service.ports.http.
• service.httpsPort renamed as service.ports.https.
• serviceMonitor.additionalLabels renamed as serviceMonitor.labels.

To 8.0.0

Due to recent changes in the container image (see Notable changes), the major version of the chart has been bumped preemptively.

Upgrading from version 7.x.x should be possible following the workaround below (the following example assumes that the release name is jenkins):

• Create a backup of your Jenkins data (e.g. using Velero to backup your PV)
• Remove Jenkins deployment:

export JENKINS_PASSWORD=$(kubectl get secret --namespace default jenkins -o jsonpath="{.data.jenkins-password}" | base64 -d)
kubectl delete deployments.apps jenkins

• Upgrade your release and delete data that should not be persisted anymore:

helm upgrade jenkins oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins --set jenkinsPassword=$JENKINS_PASSWORD --set jenkinsHome=/bitnami/jenkins/jenkins_home
kubectl exec -it $(kubectl get pod -l app.kubernetes.io/instance=jenkins,app.kubernetes.io/name=jenkins -o jsonpath="{.items[0].metadata.name}") -- find /bitnami/jenkins -mindepth 1 -maxdepth 1 -not -name jenkins_home -exec rm -rf {} \;

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

To 7.0.0

Chart labels were adapted to follow the Helm charts standard labels.

Consequences:

• Backwards compatibility is not guaranteed. However, you can easily workaround this issue by removing Jenkins deployment before upgrading (the following example assumes that the release name is jenkins):

export JENKINS_PASSWORD=$(kubectl get secret --namespace default jenkins -o jsonpath="{.data.jenkins-password}" | base64 -d)
kubectl delete deployments.apps jenkins
helm upgrade jenkins oci://REGISTRY_NAME/REPOSITORY_NAME/jenkins --set jenkinsPassword=$JENKINS_PASSWORD

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

To 6.1.0

This version also introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 6.0.0

On November 13, 2020, Helm v2 support formally ended. This major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

To 5.0.0

The Bitnami Jenkins image was migrated to a “non-root” user approach. Previously the container ran as the root user and the Jenkins service was started as the jenkins user. From now on, both the container and the Jenkins service run as user jenkins (uid=1001). You can revert this behavior by setting the parameters securityContext.runAsUser, and securityContext.fsGroup to root. Ingress configuration was also adapted to follow the Helm charts best practices.

Consequences:

• No “privileged” actions are allowed anymore.
• Backwards compatibility is not guaranteed when persistence is enabled.

To upgrade to 5.0.0, install a new Jenkins chart, and migrate your Jenkins data ensuring the jenkins user has the appropriate permissions.

To 4.0.0

Helm performs a lookup for the object based on its group (apps), version (v1), and kind (Deployment). Also known as its GroupVersionKind, or GVK. Changing the GVK is considered a compatibility breaker from Kubernetes’ point of view, so you cannot “upgrade” those objects to the new GVK in-place. Earlier versions of Helm 3 did not perform the lookup correctly which has since been fixed to match the spec.

In 4dfac075aacf74405e31ae5b27df4369e84eb0b0 the apiVersion of the deployment resources was updated to apps/v1 in tune with the api’s deprecated, resulting in compatibility breakage.

This major version signifies this change.

To 1.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart’s deployments. Use the workaround below to upgrade from versions previous to 1.0.0. The following example assumes that the release name is jenkins:

kubectl patch deployment jenkins --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.