Bitnami package for Apache Kafka

Apache Kafka is a distributed streaming platform designed to build real-time pipelines and can be used as a message broker or as a replacement for a log aggregation solution for big data applications.

Overview of Apache Kafka

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/kafka

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Kafka deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/kafka

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy Kafka on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Listeners configuration

This chart allows you to automatically configure Kafka with 3 listeners:

• One for inter-broker communications.
• A second one for communications with clients within the K8s cluster.
• (optional) a third listener for communications with clients outside the K8s cluster. Check this section for more information.

For more complex configurations, set the listeners, advertisedListeners and listenerSecurityProtocolMap parameters as needed.

Enable security for Kafka and Zookeeper

You can configure different authentication protocols for each listener you configure in Kafka. For instance, you can use sasl_tls authentication for client communications, while using tls for inter-broker communications. This table shows the available protocols and the security they provide:

Method	Authentication	Encryption via TLS
plaintext	None	No
tls	None	Yes
mtls	Yes (two-way authentication)	Yes
sasl	Yes (via SASL)	No
sasl_tls	Yes (via SASL)	Yes

Configure the authentication protocols for client and inter-broker communications by setting the auth.clientProtocol and auth.interBrokerProtocol parameters to the desired ones, respectively.

If you enabled SASL authentication on any listener, you can set the SASL credentials using the parameters below:

• auth.sasl.jaas.clientUsers/auth.sasl.jaas.clientPasswords: when enabling SASL authentication for communications with clients.
• auth.sasl.jaas.interBrokerUser/auth.sasl.jaas.interBrokerPassword: when enabling SASL authentication for inter-broker communications.
• auth.jaas.zookeeperUser/auth.jaas.zookeeperPassword: In the case that the Zookeeper chart is deployed with SASL authentication enabled.

In order to configure TLS authentication/encryption, you can create a secret per Kafka broker you have in the cluster containing the Java Key Stores (JKS) files: the truststore (kafka.truststore.jks) and the keystore (kafka.keystore.jks). Then, you need pass the secret names with the tls.existingSecret parameter when deploying the chart.

Note

: If the JKS files are password protected (recommended), you will need to provide the password to get access to the keystores. To do so, use the tls.password parameter to provide your password.

For instance, to configure TLS authentication on a Kafka cluster with 2 Kafka brokers use the commands below to create the secrets:

kubectl create secret generic kafka-jks-0 --from-file=kafka.truststore.jks=./kafka.truststore.jks --from-file=kafka.keystore.jks=./kafka-0.keystore.jks
kubectl create secret generic kafka-jks-1 --from-file=kafka.truststore.jks=./kafka.truststore.jks --from-file=kafka.keystore.jks=./kafka-1.keystore.jks

Note

: the command above assumes you already created the truststore and keystores files. This script can help you with the JKS files generation.

If, for some reason (like using Cert-Manager) you can not use the default JKS secret scheme, you can use the additional parameters:

• tls.jksTruststoreSecret to define additional secret, where the kafka.truststore.jks is being kept. The truststore password must be the same as in tls.password
• tls.jksTruststore to overwrite the default value of the truststore key (kafka.truststore.jks).

Note

: If you are using cert-manager, particularly when an ACME issuer is used, the ca.crt field is not put in the Secret that cert-manager creates. To handle this, the tls.pemChainIncluded property can be set to true and the initContainer created by this Chart will attempt to extract the intermediate certs from the tls.crt field of the secret (which is a PEM chain) : The truststore/keystore from above must be protected with the same password as in tls.password

You can deploy the chart with authentication using the following parameters:

replicaCount=2
listeners.client.client.protocol=SASL
listeners.client.interbroker.protocol=TLS
tls.existingSecret=kafka-jks
tls.password=jksPassword
sasl.client.users[0]=brokerUser
sasl.client.passwords[0]=brokerPassword
sasl.zookeeper.user=zookeeperUser
sasl.zookeeper.password=zookeeperPassword
zookeeper.auth.enabled=true
zookeeper.auth.serverUsers=zookeeperUser
zookeeper.auth.serverPasswords=zookeeperPassword
zookeeper.auth.clientUser=zookeeperUser
zookeeper.auth.clientPassword=zookeeperPassword

You can deploy the chart with AclAuthorizer using the following parameters:

replicaCount=2
listeners.client.protocol=SASL
listeners.interbroker.protocol=SASL_TLS
tls.existingSecret=kafka-jks-0
tls.password=jksPassword
sasl.client.users[0]=brokerUser
sasl.client.passwords[0]=brokerPassword
sasl.zookeeper.user=zookeeperUser
sasl.zookeeper.password=zookeeperPassword
zookeeper.auth.enabled=true
zookeeper.auth.serverUsers=zookeeperUser
zookeeper.auth.serverPasswords=zookeeperPassword
zookeeper.auth.clientUser=zookeeperUser
zookeeper.auth.clientPassword=zookeeperPassword
authorizerClassName=kafka.security.authorizer.AclAuthorizer
allowEveryoneIfNoAclFound=false
superUsers=User:admin

If you are using Kafka ACLs, you might encounter in kafka-authorizer.log the following event: [...] Principal = User:ANONYMOUS is Allowed Operation [...].

By setting the following parameter: listeners.client.protocol=SSL and listener.client.sslClientAuth=required, Kafka will require the clients to authenticate to Kafka brokers via certificate.

As result, we will be able to see in kafka-authorizer.log the events specific Subject: [...] Principal = User:CN=kafka,OU=...,O=...,L=...,C=..,ST=... is [...].

Accessing Kafka brokers from outside the cluster

In order to access Kafka Brokers from outside the cluster, an additional listener and advertised listener must be configured. Additionally, a specific service per kafka pod will be created.

There are three ways of configuring external access. Using LoadBalancer services, using NodePort services or using ClusterIP services.

Using LoadBalancer services

You have two alternatives to use LoadBalancer services:

• Option A) Use random load balancer IPs using an initContainer that waits for the IPs to be ready and discover them automatically.

externalAccess.enabled=true
externalAccess.broker.service.type=LoadBalancer
externalAccess.controller.service.type=LoadBalancer
externalAccess.broker.service.ports.external=9094
externalAccess.controller.service.containerPorts.external=9094
externalAccess.autoDiscovery.enabled=true
serviceAccount.create=true
rbac.create=true

Note: This option requires creating RBAC rules on clusters where RBAC policies are enabled.

• Option B) Manually specify the load balancer IPs:

externalAccess.enabled=true
externalAccess.controller.service.type=LoadBalancer
externalAccess.controller.service.containerPorts.external=9094
externalAccess.controller.service.loadBalancerIPs[0]='external-ip-1'
externalAccess.controller.service.loadBalancerIPs[1]='external-ip-2'
externalAccess.broker.service.type=LoadBalancer
externalAccess.broker.service.ports.external=9094
externalAccess.broker.service.loadBalancerIPs[0]='external-ip-3'
externalAccess.broker.service.loadBalancerIPs[1]='external-ip-4'

Note: You need to know in advance the load balancer IPs so each Kafka broker advertised listener is configured with it.

Following the aforementioned steps will also allow to connect the brokers from the outside using the cluster’s default service (when service.type is LoadBalancer or NodePort). Use the property service.externalPort to specify the port used for external connections.

Using NodePort services

You have two alternatives to use NodePort services:

• Option A) Use random node ports using an initContainer that discover them automatically.

  externalAccess.enabled=true
  externalAccess.controller.service.type=NodePort
  externalAccess.broker.service.type=NodePort
  externalAccess.autoDiscovery.enabled=true
  serviceAccount.create=true
  rbac.create=true
  

  Note: This option requires creating RBAC rules on clusters where RBAC policies are enabled.

• Option B) Manually specify the node ports:

  externalAccess.enabled=true
  externalAccess.controller.service.type=NodePort
  externalAccess.controller.service.nodePorts[0]='node-port-1'
  externalAccess.controller.service.nodePorts[1]='node-port-2'
  

  Note: You need to know in advance the node ports that will be exposed so each Kafka broker advertised listener is configured with it.

  The pod will try to get the external ip of the node using curl -s https://ipinfo.io/ip unless externalAccess.<controller|broker>.service.domain or externalAccess.<controller|broker>.service.useHostIPs is provided.

• Option C) Manually specify distinct external IPs (using controller+broker nodes)

  externalAccess.enabled=true
  externalAccess.controller.service.type=NodePort
  externalAccess.controller.service.externalIPs[0]='172.16.0.20'
  externalAccess.controller.service.externalIPs[1]='172.16.0.21'
  externalAccess.controller.service.externalIPs[2]='172.16.0.22'
  

  Note: You need to know in advance the available IP of your cluster that will be exposed so each Kafka broker advertised listener is configured with it.

Using ClusterIP services

Note: This option requires that an ingress is deployed within your cluster

externalAccess.enabled=true
externalAccess.controller.service.type=ClusterIP
externalAccess.controller.service.ports.external=9094
externalAccess.controller.service.domain='ingress-ip'
externalAccess.broker.service.type=ClusterIP
externalAccess.broker.service.ports.external=9094
externalAccess.broker.service.domain='ingress-ip'

Note: the deployed ingress must contain the following block:

tcp:
  9094: "{{ include "common.names.namespace" . }}/{{ include "common.names.fullname" . }}-0-external:9094"
  9095: "{{ include "common.names.namespace" . }}/{{ include "common.names.fullname" . }}-1-external:9094"
  9096: "{{ include "common.names.namespace" . }}/{{ include "common.names.fullname" . }}-2-external:9094"

Name resolution with External-DNS

You can use the following values to generate External-DNS annotations which automatically creates DNS records for each ReplicaSet pod:

externalAccess:
  controller:
    service:
      annotations:
        external-dns.alpha.kubernetes.io/hostname: "{{ .targetPod }}.example.com"

Enable metrics

The chart can optionally start two metrics exporters:

• JMX exporter, to expose JMX metrics. By default, it uses port 5556.
• Zookeeper exporter, to expose Zookeeper metrics. By default, it uses port 9141.

To expose JMX metrics to Prometheus, use the parameter below:

metrics.jmx.enabled: true

• To enable Zookeeper chart metrics, use the parameter below:

zookeeper.metrics.enabled: true

Sidecars

If you have a need for additional containers to run within the same pod as Kafka (e.g. an additional metrics or logging exporter), you can do so via the sidecars config parameter. Simply define your container according to the Kubernetes container spec.

sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
       containerPort: 1234

Setting Pod’s affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

Deploying extra resources

There are cases where you may want to deploy extra objects, such as Kafka Connect. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter. The following example would create a deployment including a Kafka Connect deployment so you can connect Kafka with MongoDB®:

## Extra objects to deploy (value evaluated as a template)
##
extraDeploy:
  - |
    apiVersion: apps/v1
    kind: Deployment
    metadata:
      name: {{ include "common.names.fullname" . }}-connect
      labels: {{- include "common.labels.standard" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 4 }}
        app.kubernetes.io/component: connector
    spec:
      replicas: 1
      selector:
        matchLabels: {{- include "common.labels.matchLabels" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 6 }}
          app.kubernetes.io/component: connector
      template:
        metadata:
          labels: {{- include "common.labels.standard" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 8 }}
            app.kubernetes.io/component: connector
        spec:
          containers:
            - name: connect
              image: KAFKA-CONNECT-IMAGE
              imagePullPolicy: IfNotPresent
              ports:
                - name: connector
                  containerPort: 8083
              volumeMounts:
                - name: configuration
                  mountPath: /bitnami/kafka/config
          volumes:
            - name: configuration
              configMap:
                name: {{ include "common.names.fullname" . }}-connect
  - |
    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: {{ include "common.names.fullname" . }}-connect
      labels: {{- include "common.labels.standard" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 4 }}
        app.kubernetes.io/component: connector
    data:
      connect-standalone.properties: |-
        bootstrap.servers = {{ include "common.names.fullname" . }}-0.{{ include "common.names.fullname" . }}-headless.{{ include "common.names.namespace" . }}.svc.{{ .Values.clusterDomain }}:{{ .Values.service.port }}
        ...
      mongodb.properties: |-
        connection.uri=mongodb://root:password@mongodb-hostname:27017
        ...
  - |
    apiVersion: v1
    kind: Service
    metadata:
      name: {{ include "common.names.fullname" . }}-connect
      labels: {{- include "common.labels.standard" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 4 }}
        app.kubernetes.io/component: connector
    spec:
      ports:
        - protocol: TCP
          port: 8083
          targetPort: connector
      selector: {{- include "common.labels.matchLabels" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 4 }}
        app.kubernetes.io/component: connector

You can create the Kafka Connect image using the Dockerfile below:

FROM bitnami/kafka:latest
# Download MongoDB® Connector for Apache Kafka https://www.confluent.io/hub/mongodb/kafka-connect-mongodb
RUN mkdir -p /opt/bitnami/kafka/plugins && \
    cd /opt/bitnami/kafka/plugins && \
    curl --remote-name --location --silent https://search.maven.org/remotecontent?filepath=org/mongodb/kafka/mongo-kafka-connect/1.2.0/mongo-kafka-connect-1.2.0-all.jar
CMD /opt/bitnami/kafka/bin/connect-standalone.sh /opt/bitnami/kafka/config/connect-standalone.properties /opt/bitnami/kafka/config/mongo.properties

Persistence

The Bitnami Kafka image stores the Kafka data at the /bitnami/kafka path of the container. Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube.

Adjust permissions of persistent volume mountpoint

As the image run as non-root by default, it is necessary to adjust the ownership of the persistent volume so that the container can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volume. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volume before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.storageClass	DEPRECATED: use global.defaultStorageClass instead	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.fullname	""
fullnameOverride	String to fully override common.names.fullname	""
clusterDomain	Default Kubernetes cluster domain	cluster.local
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
extraDeploy	Array of extra objects to deploy with the release	[]
serviceBindings.enabled	Create secret for service binding (Experimental)	false
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the statefulset	["sleep"]
diagnosticMode.args	Args to override all containers in the statefulset	["infinity"]

Kafka parameters

Name	Description	Value
image.registry	Kafka image registry	REGISTRY_NAME
image.repository	Kafka image repository	REPOSITORY_NAME/kafka
image.digest	Kafka image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	Kafka image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]
image.debug	Specify if debug values should be set	false
extraInit	Additional content for the kafka init script, rendered as a template.	""
config	Configuration file for Kafka, rendered as a template. Auto-generated based on chart values when not specified.	""
existingConfigmap	ConfigMap with Kafka Configuration	""
extraConfig	Additional configuration to be appended at the end of the generated Kafka configuration file.	""
extraConfigYaml	Additional configuration in yaml format to be appended at the end of the generated Kafka configuration file.	{}
secretConfig	Additional configuration to be appended at the end of the generated Kafka configuration file.	""
existingSecretConfig	Secret with additonal configuration that will be appended to the end of the generated Kafka configuration file	""
log4j	An optional log4j.properties file to overwrite the default of the Kafka brokers	""
existingLog4jConfigMap	The name of an existing ConfigMap containing a log4j.properties file	""
heapOpts	Kafka Java Heap size	-Xmx1024m -Xms1024m
brokerRackAssignment	Set Broker Assignment for multi tenant environment Allowed values: aws-az	""
interBrokerProtocolVersion	Override the setting ‘inter.broker.protocol.version’ during the ZK migration.	""
listeners.client.name	Name for the Kafka client listener	CLIENT
listeners.client.containerPort	Port for the Kafka client listener	9092
listeners.client.protocol	Security protocol for the Kafka client listener. Allowed values are ‘PLAINTEXT’, ‘SASL_PLAINTEXT’, ‘SASL_SSL’ and ‘SSL’	SASL_PLAINTEXT
listeners.client.sslClientAuth	Optional. If SASL_SSL is enabled, configure mTLS TLS authentication type. If SSL protocol is enabled, overrides tls.authType for this listener. Allowed values are ‘none’, ‘requested’ and ‘required’	""
listeners.controller.name	Name for the Kafka controller listener	CONTROLLER
listeners.controller.containerPort	Port for the Kafka controller listener	9093
listeners.controller.protocol	Security protocol for the Kafka controller listener. Allowed values are ‘PLAINTEXT’, ‘SASL_PLAINTEXT’, ‘SASL_SSL’ and ‘SSL’	SASL_PLAINTEXT
listeners.controller.sslClientAuth	Optional. If SASL_SSL is enabled, configure mTLS TLS authentication type. If SSL protocol is enabled, overrides tls.authType for this listener. Allowed values are ‘none’, ‘requested’ and ‘required’	""
listeners.interbroker.name	Name for the Kafka inter-broker listener	INTERNAL
listeners.interbroker.containerPort	Port for the Kafka inter-broker listener	9094
listeners.interbroker.protocol	Security protocol for the Kafka inter-broker listener. Allowed values are ‘PLAINTEXT’, ‘SASL_PLAINTEXT’, ‘SASL_SSL’ and ‘SSL’	SASL_PLAINTEXT
listeners.interbroker.sslClientAuth	Optional. If SASL_SSL is enabled, configure mTLS TLS authentication type. If SSL protocol is enabled, overrides tls.authType for this listener. Allowed values are ‘none’, ‘requested’ and ‘required’	""
listeners.external.containerPort	Port for the Kafka external listener	9095
listeners.external.protocol	Security protocol for the Kafka external listener. . Allowed values are ‘PLAINTEXT’, ‘SASL_PLAINTEXT’, ‘SASL_SSL’ and ‘SSL’	SASL_PLAINTEXT
listeners.external.name	Name for the Kafka external listener	EXTERNAL
listeners.external.sslClientAuth	Optional. If SASL_SSL is enabled, configure mTLS TLS authentication type. If SSL protocol is enabled, overrides tls.sslClientAuth for this listener. Allowed values are ‘none’, ‘requested’ and ‘required’	""
listeners.extraListeners	Array of listener objects to be appended to already existing listeners	[]
listeners.overrideListeners	Overrides the Kafka ‘listeners’ configuration setting.	""
listeners.advertisedListeners	Overrides the Kafka ‘advertised.listener’ configuration setting.	""
listeners.securityProtocolMap	Overrides the Kafka ‘security.protocol.map’ configuration setting.	""

Kafka SASL parameters

Name	Description	Value
sasl.enabledMechanisms	Comma-separated list of allowed SASL mechanisms when SASL listeners are configured. Allowed types: PLAIN, SCRAM-SHA-256, SCRAM-SHA-512, OAUTHBEARER	PLAIN,SCRAM-SHA-256,SCRAM-SHA-512
sasl.interBrokerMechanism	SASL mechanism for inter broker communication.	PLAIN
sasl.controllerMechanism	SASL mechanism for controller communications.	PLAIN
sasl.oauthbearer.tokenEndpointUrl	The URL for the OAuth/OIDC identity provider	""
sasl.oauthbearer.jwksEndpointUrl	The OAuth/OIDC provider URL from which the provider’s JWKS (JSON Web Key Set) can be retrieved	""
sasl.oauthbearer.expectedAudience	The comma-delimited setting for the broker to use to verify that the JWT was issued for one of the expected audiences	""
sasl.oauthbearer.subClaimName	The OAuth claim name for the subject.	sub
sasl.interbroker.user	Username for inter-broker communications when SASL is enabled	inter_broker_user
sasl.interbroker.password	Password for inter-broker communications when SASL is enabled. If not set and SASL is enabled for the controller listener, a random password will be generated.	""
sasl.interbroker.clientId	Client ID for inter-broker communications when SASL is enabled with mechanism OAUTHBEARER	inter_broker_client
sasl.interbroker.clientSecret	Client Secret for inter-broker communications when SASL is enabled with mechanism OAUTHBEARER. If not set and SASL is enabled for the controller listener, a random secret will be generated.	""
sasl.controller.user	Username for controller communications when SASL is enabled	controller_user
sasl.controller.password	Password for controller communications when SASL is enabled. If not set and SASL is enabled for the inter-broker listener, a random password will be generated.	""
sasl.controller.clientId	Client ID for controller communications when SASL is enabled with mechanism OAUTHBEARER	controller_broker_client
sasl.controller.clientSecret	Client Secret for controller communications when SASL is enabled with mechanism OAUTHBEARER. If not set and SASL is enabled for the inter-broker listener, a random secret will be generated.	""
sasl.client.users	Comma-separated list of usernames for client communications when SASL is enabled	["user1"]
sasl.client.passwords	Comma-separated list of passwords for client communications when SASL is enabled, must match the number of client.users	""
sasl.zookeeper.user	Username for zookeeper communications when SASL is enabled.	""
sasl.zookeeper.password	Password for zookeeper communications when SASL is enabled.	""
sasl.existingSecret	Name of the existing secret containing credentials for clientUsers, interBrokerUser, controllerUser and zookeeperUser	""

Kafka TLS parameters

Name	Description	Value
tls.type	Format to use for TLS certificates. Allowed types: JKS and PEM	JKS
tls.pemChainIncluded	Flag to denote that the Certificate Authority (CA) certificates are bundled with the endpoint cert.	false
tls.existingSecret	Name of the existing secret containing the TLS certificates for the Kafka nodes.	""
tls.autoGenerated	Generate automatically self-signed TLS certificates for Kafka brokers. Currently only supported if tls.type is PEM	false
tls.customAltNames	Optionally specify extra list of additional subject alternative names (SANs) for the automatically generated TLS certificates.	[]
tls.passwordsSecret	Name of the secret containing the password to access the JKS files or PEM key when they are password-protected. (key: password)	""
tls.passwordsSecretKeystoreKey	The secret key from the tls.passwordsSecret containing the password for the Keystore.	keystore-password
tls.passwordsSecretTruststoreKey	The secret key from the tls.passwordsSecret containing the password for the Truststore.	truststore-password
tls.passwordsSecretPemPasswordKey	The secret key from the tls.passwordsSecret containing the password for the PEM key inside ‘tls.passwordsSecret’.	""
tls.keystorePassword	Password to access the JKS keystore when it is password-protected. Ignored when ‘tls.passwordsSecret’ is provided.	""
tls.truststorePassword	Password to access the JKS truststore when it is password-protected. Ignored when ‘tls.passwordsSecret’ is provided.	""
tls.keyPassword	Password to access the PEM key when it is password-protected.	""
tls.jksKeystoreKey	The secret key from the tls.existingSecret containing the keystore	""
tls.jksTruststoreSecret	Name of the existing secret containing your truststore if truststore not existing or different from the one in the tls.existingSecret	""
tls.jksTruststoreKey	The secret key from the tls.existingSecret or tls.jksTruststoreSecret containing the truststore	""
tls.endpointIdentificationAlgorithm	The endpoint identification algorithm to validate server hostname using server certificate	https
tls.sslClientAuth	Sets the default value for the ssl.client.auth Kafka setting.	required
tls.zookeeper.enabled	Enable TLS for Zookeeper client connections.	false
tls.zookeeper.verifyHostname	Hostname validation.	true
tls.zookeeper.existingSecret	Name of the existing secret containing the TLS certificates for ZooKeeper client communications.	""
tls.zookeeper.existingSecretKeystoreKey	The secret key from the tls.zookeeper.existingSecret containing the Keystore.	zookeeper.keystore.jks
tls.zookeeper.existingSecretTruststoreKey	The secret key from the tls.zookeeper.existingSecret containing the Truststore.	zookeeper.truststore.jks
tls.zookeeper.passwordsSecret	Existing secret containing Keystore and Truststore passwords.	""
tls.zookeeper.passwordsSecretKeystoreKey	The secret key from the tls.zookeeper.passwordsSecret containing the password for the Keystore.	keystore-password
tls.zookeeper.passwordsSecretTruststoreKey	The secret key from the tls.zookeeper.passwordsSecret containing the password for the Truststore.	truststore-password
tls.zookeeper.keystorePassword	Password to access the JKS keystore when it is password-protected. Ignored when ‘tls.passwordsSecret’ is provided.	""
tls.zookeeper.truststorePassword	Password to access the JKS truststore when it is password-protected. Ignored when ‘tls.passwordsSecret’ is provided.	""
extraEnvVars	Extra environment variables to add to Kafka pods	[]
extraEnvVarsCM	ConfigMap with extra environment variables	""
extraEnvVarsSecret	Secret with extra environment variables	""
extraVolumes	Optionally specify extra list of additional volumes for the Kafka pod(s)	[]
extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Kafka container(s)	[]
sidecars	Add additional sidecar containers to the Kafka pod(s)	[]
initContainers	Add additional Add init containers to the Kafka pod(s)	[]
dnsPolicy	Specifies the DNS policy for the zookeeper pods	""
dnsConfig	allows users more control on the DNS settings for a Pod. Required if dnsPolicy is set to None	{}

Controller-eligible statefulset parameters

Name	Description	Value
controller.replicaCount	Number of Kafka controller-eligible nodes	3
controller.controllerOnly	If set to true, controller nodes will be deployed as dedicated controllers, instead of controller+broker processes.	false
controller.minId	Minimal node.id values for controller-eligible nodes. Do not change after first initialization.	0
controller.zookeeperMigrationMode	Set to true to deploy cluster controller quorum	false
controller.config	Configuration file for Kafka controller-eligible nodes, rendered as a template. Auto-generated based on chart values when not specified.	""
controller.existingConfigmap	ConfigMap with Kafka Configuration for controller-eligible nodes.	""
controller.extraConfig	Additional configuration to be appended at the end of the generated Kafka controller-eligible nodes configuration file.	""
controller.extraConfigYaml	Additional configuration in yaml format to be appended at the end of the generated Kafka controller-eligible nodes configuration file.	{}
controller.secretConfig	Additional configuration to be appended at the end of the generated Kafka controller-eligible nodes configuration file.	""
controller.existingSecretConfig	Secret with additonal configuration that will be appended to the end of the generated Kafka controller-eligible nodes configuration file	""
controller.heapOpts	Kafka Java Heap size for controller-eligible nodes	-Xmx1024m -Xms1024m
controller.command	Override Kafka container command	[]
controller.args	Override Kafka container arguments	[]
controller.extraEnvVars	Extra environment variables to add to Kafka pods	[]
controller.extraEnvVarsCM	ConfigMap with extra environment variables	""
controller.extraEnvVarsSecret	Secret with extra environment variables	""
controller.extraContainerPorts	Kafka controller-eligible extra containerPorts.	[]
controller.livenessProbe.enabled	Enable livenessProbe on Kafka containers	true
controller.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	10
controller.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
controller.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
controller.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
controller.livenessProbe.successThreshold	Success threshold for livenessProbe	1
controller.readinessProbe.enabled	Enable readinessProbe on Kafka containers	true
controller.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
controller.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
controller.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
controller.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
controller.readinessProbe.successThreshold	Success threshold for readinessProbe	1
controller.startupProbe.enabled	Enable startupProbe on Kafka containers	false
controller.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
controller.startupProbe.periodSeconds	Period seconds for startupProbe	10
controller.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
controller.startupProbe.failureThreshold	Failure threshold for startupProbe	15
controller.startupProbe.successThreshold	Success threshold for startupProbe	1
controller.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
controller.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
controller.customStartupProbe	Custom startupProbe that overrides the default one	{}
controller.lifecycleHooks	lifecycleHooks for the Kafka container to automate configuration before or after startup	{}
controller.initContainerResources.limits	The resources limits for the init container	{}
controller.initContainerResources.requests	The requested resources for the init container	{}
controller.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if controller.resources is set (controller.resources is recommended for production).	small
controller.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
controller.podSecurityContext.enabled	Enable security context for the pods	true
controller.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
controller.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
controller.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
controller.podSecurityContext.fsGroup	Set Kafka pod’s Security Context fsGroup	1001
controller.podSecurityContext.seccompProfile.type	Set Kafka pods’s Security Context seccomp profile	RuntimeDefault
controller.containerSecurityContext.enabled	Enable Kafka containers’ Security Context	true
controller.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
controller.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
controller.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
controller.containerSecurityContext.runAsGroup	Set Kafka containers’ Security Context runAsGroup	1001
controller.containerSecurityContext.runAsNonRoot	Set Kafka containers’ Security Context runAsNonRoot	true
controller.containerSecurityContext.allowPrivilegeEscalation	Force the child process to be run as non-privileged	false
controller.containerSecurityContext.readOnlyRootFilesystem	Allows the pod to mount the RootFS as ReadOnly only	true
controller.containerSecurityContext.capabilities.drop	Set Kafka containers’ server Security Context capabilities to be dropped	["ALL"]
controller.automountServiceAccountToken	Mount Service Account token in pod	false
controller.hostAliases	Kafka pods host aliases	[]
controller.hostNetwork	Specify if host network should be enabled for Kafka pods	false
controller.hostIPC	Specify if host IPC should be enabled for Kafka pods	false
controller.podLabels	Extra labels for Kafka pods	{}
controller.podAnnotations	Extra annotations for Kafka pods	{}
controller.podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
controller.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
controller.nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
controller.nodeAffinityPreset.key	Node label key to match Ignored if affinity is set.	""
controller.nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set.	[]
controller.affinity	Affinity for pod assignment	{}
controller.nodeSelector	Node labels for pod assignment	{}
controller.tolerations	Tolerations for pod assignment	[]
controller.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
controller.terminationGracePeriodSeconds	Seconds the pod needs to gracefully terminate	""
controller.podManagementPolicy	StatefulSet controller supports relax its ordering guarantees while preserving its uniqueness and identity guarantees. There are two valid pod management policies: OrderedReady and Parallel	Parallel
controller.minReadySeconds	How many seconds a pod needs to be ready before killing the next, during update	0
controller.priorityClassName	Name of the existing priority class to be used by kafka pods	""
controller.runtimeClassName	Name of the runtime class to be used by pod(s)	""
controller.enableServiceLinks	Whether information about services should be injected into pod’s environment variable	true
controller.schedulerName	Name of the k8s scheduler (other than default)	""
controller.updateStrategy.type	Kafka statefulset strategy type	RollingUpdate
controller.extraVolumes	Optionally specify extra list of additional volumes for the Kafka pod(s)	[]
controller.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Kafka container(s)	[]
controller.sidecars	Add additional sidecar containers to the Kafka pod(s)	[]
controller.initContainers	Add additional Add init containers to the Kafka pod(s)	[]

Experimental: Kafka Controller Autoscaling configuration

Name	Description	Value
controller.autoscaling.vpa.enabled	Enable VPA	false
controller.autoscaling.vpa.annotations	Annotations for VPA resource	{}
controller.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
controller.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
controller.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
controller.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
controller.autoscaling.hpa.enabled	Enable HPA for Kafka Controller	false
controller.autoscaling.hpa.minReplicas	Minimum number of Kafka Controller replicas	""
controller.autoscaling.hpa.maxReplicas	Maximum number of Kafka Controller replicas	""
controller.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
controller.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
controller.pdb.create	Deploy a pdb object for the Kafka pod	true
controller.pdb.minAvailable	Maximum number/percentage of unavailable Kafka replicas	""
controller.pdb.maxUnavailable	Maximum number/percentage of unavailable Kafka replicas	""
controller.persistence.enabled	Enable Kafka data persistence using PVC, note that ZooKeeper persistence is unaffected	true
controller.persistence.existingClaim	A manually managed Persistent Volume and Claim	""
controller.persistence.storageClass	PVC Storage Class for Kafka data volume	""
controller.persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
controller.persistence.size	PVC Storage Request for Kafka data volume	8Gi
controller.persistence.annotations	Annotations for the PVC	{}
controller.persistence.labels	Labels for the PVC	{}
controller.persistence.selector	Selector to match an existing Persistent Volume for Kafka data PVC. If set, the PVC can’t have a PV dynamically provisioned for it	{}
controller.persistence.mountPath	Mount path of the Kafka data volume	/bitnami/kafka
controller.logPersistence.enabled	Enable Kafka logs persistence using PVC, note that ZooKeeper persistence is unaffected	false
controller.logPersistence.existingClaim	A manually managed Persistent Volume and Claim	""
controller.logPersistence.storageClass	PVC Storage Class for Kafka logs volume	""
controller.logPersistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
controller.logPersistence.size	PVC Storage Request for Kafka logs volume	8Gi
controller.logPersistence.annotations	Annotations for the PVC	{}
controller.logPersistence.selector	Selector to match an existing Persistent Volume for Kafka log data PVC. If set, the PVC can’t have a PV dynamically provisioned for it	{}
controller.logPersistence.mountPath	Mount path of the Kafka logs volume	/opt/bitnami/kafka/logs

Broker-only statefulset parameters

Name	Description	Value
broker.replicaCount	Number of Kafka broker-only nodes	0
broker.minId	Minimal node.id values for broker-only nodes. Do not change after first initialization.	100
broker.zookeeperMigrationMode	Set to true to deploy cluster controller quorum	false
broker.config	Configuration file for Kafka broker-only nodes, rendered as a template. Auto-generated based on chart values when not specified.	""
broker.existingConfigmap	ConfigMap with Kafka Configuration for broker-only nodes.	""
broker.extraConfig	Additional configuration to be appended at the end of the generated Kafka broker-only nodes configuration file.	""
broker.extraConfigYaml	Additional configuration in yaml format to be appended at the end of the generated Kafka broker-only nodes configuration file.	{}
broker.secretConfig	Additional configuration to be appended at the end of the generated Kafka broker-only nodes configuration file.	""
broker.existingSecretConfig	Secret with additonal configuration that will be appended to the end of the generated Kafka broker-only nodes configuration file	""
broker.heapOpts	Kafka Java Heap size for broker-only nodes	-Xmx1024m -Xms1024m
broker.command	Override Kafka container command	[]
broker.args	Override Kafka container arguments	[]
broker.extraEnvVars	Extra environment variables to add to Kafka pods	[]
broker.extraEnvVarsCM	ConfigMap with extra environment variables	""
broker.extraEnvVarsSecret	Secret with extra environment variables	""
broker.extraContainerPorts	Kafka broker-only extra containerPorts.	[]
broker.livenessProbe.enabled	Enable livenessProbe on Kafka containers	true
broker.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	10
broker.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
broker.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
broker.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
broker.livenessProbe.successThreshold	Success threshold for livenessProbe	1
broker.readinessProbe.enabled	Enable readinessProbe on Kafka containers	true
broker.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
broker.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
broker.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
broker.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
broker.readinessProbe.successThreshold	Success threshold for readinessProbe	1
broker.startupProbe.enabled	Enable startupProbe on Kafka containers	false
broker.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
broker.startupProbe.periodSeconds	Period seconds for startupProbe	10
broker.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
broker.startupProbe.failureThreshold	Failure threshold for startupProbe	15
broker.startupProbe.successThreshold	Success threshold for startupProbe	1
broker.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
broker.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
broker.customStartupProbe	Custom startupProbe that overrides the default one	{}
broker.lifecycleHooks	lifecycleHooks for the Kafka container to automate configuration before or after startup	{}
broker.initContainerResources.limits	The resources limits for the container	{}
broker.initContainerResources.requests	The requested resources for the container	{}
broker.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if broker.resources is set (broker.resources is recommended for production).	small
broker.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
broker.podSecurityContext.enabled	Enable security context for the pods	true
broker.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
broker.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
broker.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
broker.podSecurityContext.fsGroup	Set Kafka pod’s Security Context fsGroup	1001
broker.podSecurityContext.seccompProfile.type	Set Kafka pod’s Security Context seccomp profile	RuntimeDefault
broker.containerSecurityContext.enabled	Enable Kafka containers’ Security Context	true
broker.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
broker.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
broker.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
broker.containerSecurityContext.runAsNonRoot	Set Kafka containers’ Security Context runAsNonRoot	true
broker.containerSecurityContext.allowPrivilegeEscalation	Force the child process to be run as non-privileged	false
broker.containerSecurityContext.readOnlyRootFilesystem	Allows the pod to mount the RootFS as ReadOnly only	true
broker.containerSecurityContext.capabilities.drop	Set Kafka containers’ server Security Context capabilities to be dropped	["ALL"]
broker.automountServiceAccountToken	Mount Service Account token in pod	false
broker.hostAliases	Kafka pods host aliases	[]
broker.hostNetwork	Specify if host network should be enabled for Kafka pods	false
broker.hostIPC	Specify if host IPC should be enabled for Kafka pods	false
broker.podLabels	Extra labels for Kafka pods	{}
broker.podAnnotations	Extra annotations for Kafka pods	{}
broker.podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
broker.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
broker.nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
broker.nodeAffinityPreset.key	Node label key to match Ignored if affinity is set.	""
broker.nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set.	[]
broker.affinity	Affinity for pod assignment	{}
broker.nodeSelector	Node labels for pod assignment	{}
broker.tolerations	Tolerations for pod assignment	[]
broker.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
broker.terminationGracePeriodSeconds	Seconds the pod needs to gracefully terminate	""
broker.podManagementPolicy	StatefulSet controller supports relax its ordering guarantees while preserving its uniqueness and identity guarantees. There are two valid pod management policies: OrderedReady and Parallel	Parallel
broker.minReadySeconds	How many seconds a pod needs to be ready before killing the next, during update	0
broker.priorityClassName	Name of the existing priority class to be used by kafka pods	""
broker.runtimeClassName	Name of the runtime class to be used by pod(s)	""
broker.enableServiceLinks	Whether information about services should be injected into pod’s environment variable	true
broker.schedulerName	Name of the k8s scheduler (other than default)	""
broker.updateStrategy.type	Kafka statefulset strategy type	RollingUpdate
broker.extraVolumes	Optionally specify extra list of additional volumes for the Kafka pod(s)	[]
broker.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Kafka container(s)	[]
broker.sidecars	Add additional sidecar containers to the Kafka pod(s)	[]
broker.initContainers	Add additional Add init containers to the Kafka pod(s)	[]
broker.pdb.create	Deploy a pdb object for the Kafka pod	true
broker.pdb.minAvailable	Maximum number/percentage of unavailable Kafka replicas	""
broker.pdb.maxUnavailable	Maximum number/percentage of unavailable Kafka replicas	""

Experimental: Kafka Broker Autoscaling configuration

Name	Description	Value
broker.autoscaling.vpa.enabled	Enable VPA	false
broker.autoscaling.vpa.annotations	Annotations for VPA resource	{}
broker.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
broker.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
broker.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
broker.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
broker.autoscaling.hpa.enabled	Enable HPA for Kafka Broker	false
broker.autoscaling.hpa.minReplicas	Minimum number of Kafka Broker replicas	""
broker.autoscaling.hpa.maxReplicas	Maximum number of Kafka Broker replicas	""
broker.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
broker.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""
broker.persistence.enabled	Enable Kafka data persistence using PVC, note that ZooKeeper persistence is unaffected	true
broker.persistence.existingClaim	A manually managed Persistent Volume and Claim	""
broker.persistence.storageClass	PVC Storage Class for Kafka data volume	""
broker.persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
broker.persistence.size	PVC Storage Request for Kafka data volume	8Gi
broker.persistence.annotations	Annotations for the PVC	{}
broker.persistence.labels	Labels for the PVC	{}
broker.persistence.selector	Selector to match an existing Persistent Volume for Kafka data PVC. If set, the PVC can’t have a PV dynamically provisioned for it	{}
broker.persistence.mountPath	Mount path of the Kafka data volume	/bitnami/kafka
broker.logPersistence.enabled	Enable Kafka logs persistence using PVC, note that ZooKeeper persistence is unaffected	false
broker.logPersistence.existingClaim	A manually managed Persistent Volume and Claim	""
broker.logPersistence.storageClass	PVC Storage Class for Kafka logs volume	""
broker.logPersistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
broker.logPersistence.size	PVC Storage Request for Kafka logs volume	8Gi
broker.logPersistence.annotations	Annotations for the PVC	{}
broker.logPersistence.selector	Selector to match an existing Persistent Volume for Kafka log data PVC. If set, the PVC can’t have a PV dynamically provisioned for it	{}
broker.logPersistence.mountPath	Mount path of the Kafka logs volume	/opt/bitnami/kafka/logs

Traffic Exposure parameters

Name	Description	Value
service.type	Kubernetes Service type	ClusterIP
service.ports.client	Kafka svc port for client connections	9092
service.ports.controller	Kafka svc port for controller connections. It is used if “kraft.enabled: true”	9093
service.ports.interbroker	Kafka svc port for inter-broker connections	9094
service.ports.external	Kafka svc port for external connections	9095
service.extraPorts	Extra ports to expose in the Kafka service (normally used with the sidecar value)	[]
service.nodePorts.client	Node port for the Kafka client connections	""
service.nodePorts.external	Node port for the Kafka external connections	""
service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
service.clusterIP	Kafka service Cluster IP	""
service.loadBalancerIP	Kafka service Load Balancer IP	""
service.loadBalancerClass	Kafka service Load Balancer Class	""
service.loadBalancerSourceRanges	Kafka service Load Balancer sources	[]
service.allocateLoadBalancerNodePorts	Whether to allocate node ports when service type is LoadBalancer	true
service.externalTrafficPolicy	Kafka service external traffic policy	Cluster
service.annotations	Additional custom annotations for Kafka service	{}
service.headless.controller.annotations	Annotations for the controller-eligible headless service.	{}
service.headless.controller.labels	Labels for the controller-eligible headless service.	{}
service.headless.broker.annotations	Annotations for the broker-only headless service.	{}
service.headless.broker.labels	Labels for the broker-only headless service.	{}
externalAccess.enabled	Enable Kubernetes external cluster access to Kafka brokers	false
externalAccess.autoDiscovery.enabled	Enable using an init container to auto-detect external IPs/ports by querying the K8s API	false
externalAccess.autoDiscovery.image.registry	Init container auto-discovery image registry	REGISTRY_NAME
externalAccess.autoDiscovery.image.repository	Init container auto-discovery image repository	REPOSITORY_NAME/kubectl
externalAccess.autoDiscovery.image.digest	Kubectl image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
externalAccess.autoDiscovery.image.pullPolicy	Init container auto-discovery image pull policy	IfNotPresent
externalAccess.autoDiscovery.image.pullSecrets	Init container auto-discovery image pull secrets	[]
externalAccess.autoDiscovery.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if externalAccess.autoDiscovery.resources is set (externalAccess.autoDiscovery.resources is recommended for production).	nano
externalAccess.autoDiscovery.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
externalAccess.autoDiscovery.containerSecurityContext.enabled	Enable Kafka auto-discovery containers’ Security Context	true
externalAccess.autoDiscovery.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
externalAccess.autoDiscovery.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
externalAccess.autoDiscovery.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
externalAccess.autoDiscovery.containerSecurityContext.runAsNonRoot	Set Kafka auto-discovery containers’ Security Context runAsNonRoot	true
externalAccess.autoDiscovery.containerSecurityContext.allowPrivilegeEscalation	Set Kafka auto-discovery containers’ Security Context allowPrivilegeEscalation	false
externalAccess.autoDiscovery.containerSecurityContext.readOnlyRootFilesystem	Set Kafka auto-discovery containers’ Security Context readOnlyRootFilesystem	true
externalAccess.autoDiscovery.containerSecurityContext.capabilities.drop	Set Kafka auto-discovery containers’ Security Context capabilities to be dropped	["ALL"]
externalAccess.autoDiscovery.containerSecurityContext.seccompProfile.type	Set Kafka auto-discovery seccomp profile type	RuntimeDefault
externalAccess.controller.forceExpose	If set to true, force exposing controller-eligible nodes although they are configured as controller-only nodes	false
externalAccess.controller.service.type	Kubernetes Service type for external access. It can be NodePort, LoadBalancer or ClusterIP	LoadBalancer
externalAccess.controller.service.ports.external	Kafka port used for external access when service type is LoadBalancer	9094
externalAccess.controller.service.loadBalancerClass	Kubernetes Service Load Balancer class for external access when service type is LoadBalancer	""
externalAccess.controller.service.loadBalancerIPs	Array of load balancer IPs for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.controller.service.loadBalancerNames	Array of load balancer Names for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.controller.service.loadBalancerAnnotations	Array of load balancer annotations for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.controller.service.loadBalancerSourceRanges	Address(es) that are allowed when service is LoadBalancer	[]
externalAccess.controller.service.allocateLoadBalancerNodePorts	Whether to allocate node ports when service type is LoadBalancer	true
externalAccess.controller.service.nodePorts	Array of node ports used for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.controller.service.externalIPs	Use distinct service host IPs to configure Kafka external listener when service type is NodePort. Length must be the same as replicaCount	[]
externalAccess.controller.service.useHostIPs	Use service host IPs to configure Kafka external listener when service type is NodePort	false
externalAccess.controller.service.usePodIPs	using the MY_POD_IP address for external access.	false
externalAccess.controller.service.domain	Domain or external ip used to configure Kafka external listener when service type is NodePort or ClusterIP	""
externalAccess.controller.service.publishNotReadyAddresses	Indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready	false
externalAccess.controller.service.labels	Service labels for external access	{}
externalAccess.controller.service.annotations	Service annotations for external access	{}
externalAccess.controller.service.extraPorts	Extra ports to expose in the Kafka external service	[]
externalAccess.broker.service.type	Kubernetes Service type for external access. It can be NodePort, LoadBalancer or ClusterIP	LoadBalancer
externalAccess.broker.service.ports.external	Kafka port used for external access when service type is LoadBalancer	9094
externalAccess.broker.service.loadBalancerClass	Kubernetes Service Load Balancer class for external access when service type is LoadBalancer	""
externalAccess.broker.service.loadBalancerIPs	Array of load balancer IPs for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.broker.service.loadBalancerNames	Array of load balancer Names for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.broker.service.loadBalancerAnnotations	Array of load balancer annotations for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.broker.service.loadBalancerSourceRanges	Address(es) that are allowed when service is LoadBalancer	[]
externalAccess.broker.service.allocateLoadBalancerNodePorts	Whether to allocate node ports when service type is LoadBalancer	true
externalAccess.broker.service.nodePorts	Array of node ports used for each Kafka broker. Length must be the same as replicaCount	[]
externalAccess.broker.service.externalIPs	Use distinct service host IPs to configure Kafka external listener when service type is NodePort. Length must be the same as replicaCount	[]
externalAccess.broker.service.useHostIPs	Use service host IPs to configure Kafka external listener when service type is NodePort	false
externalAccess.broker.service.usePodIPs	using the MY_POD_IP address for external access.	false
externalAccess.broker.service.domain	Domain or external ip used to configure Kafka external listener when service type is NodePort or ClusterIP	""
externalAccess.broker.service.publishNotReadyAddresses	Indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready	false
externalAccess.broker.service.labels	Service labels for external access	{}
externalAccess.broker.service.annotations	Service annotations for external access	{}
externalAccess.broker.service.extraPorts	Extra ports to expose in the Kafka external service	[]
networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
networkPolicy.allowExternal	Don’t require client label for connections	true
networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
networkPolicy.addExternalClientAccess	Allow access from pods with client label set to “true”. Ignored if networkPolicy.allowExternal is true.	true
networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.ingressPodMatchLabels	Labels to match to allow traffic from other pods. Ignored if networkPolicy.allowExternal is true.	{}
networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces. Ignored if networkPolicy.allowExternal is true.	{}
networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces. Ignored if networkPolicy.allowExternal is true.	{}

Volume Permissions parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner and group of the persistent volume	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Init container volume-permissions image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volumePermissions.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
volumePermissions.containerSecurityContext.runAsUser	User ID for the init container	0

Other Parameters

Name	Description	Value
serviceAccount.create	Enable creation of ServiceAccount for Kafka pods	true
serviceAccount.name	The name of the service account to use. If not set and create is true, a name is generated	""
serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
rbac.create	Whether to create & use RBAC resources or not	false

Metrics parameters

Name	Description	Value
metrics.jmx.enabled	Whether or not to expose JMX metrics to Prometheus	false
metrics.jmx.kafkaJmxPort	JMX port where the exporter will collect metrics, exposed in the Kafka container.	5555
metrics.jmx.image.registry	JMX exporter image registry	REGISTRY_NAME
metrics.jmx.image.repository	JMX exporter image repository	REPOSITORY_NAME/jmx-exporter
metrics.jmx.image.digest	JMX exporter image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
metrics.jmx.image.pullPolicy	JMX exporter image pull policy	IfNotPresent
metrics.jmx.image.pullSecrets	Specify docker-registry secret names as an array	[]
metrics.jmx.containerSecurityContext.enabled	Enable Prometheus JMX exporter containers’ Security Context	true
metrics.jmx.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
metrics.jmx.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
metrics.jmx.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
metrics.jmx.containerSecurityContext.runAsNonRoot	Set Prometheus JMX exporter containers’ Security Context runAsNonRoot	true
metrics.jmx.containerSecurityContext.allowPrivilegeEscalation	Set Prometheus JMX exporter containers’ Security Context allowPrivilegeEscalation	false
metrics.jmx.containerSecurityContext.readOnlyRootFilesystem	Set Prometheus JMX exporter containers’ Security Context readOnlyRootFilesystem	true
metrics.jmx.containerSecurityContext.capabilities.drop	Set Prometheus JMX exporter containers’ Security Context capabilities to be dropped	["ALL"]
metrics.jmx.containerPorts.metrics	Prometheus JMX exporter metrics container port	5556
metrics.jmx.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.jmx.resources is set (metrics.jmx.resources is recommended for production).	micro
metrics.jmx.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
metrics.jmx.service.ports.metrics	Prometheus JMX exporter metrics service port	5556
metrics.jmx.service.clusterIP	Static clusterIP or None for headless services	""
metrics.jmx.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
metrics.jmx.service.annotations	Annotations for the Prometheus JMX exporter service	{}
metrics.jmx.whitelistObjectNames	Allows setting which JMX objects you want to expose to via JMX stats to JMX exporter	["kafka.controller:*","kafka.server:*","java.lang:*","kafka.network:*","kafka.log:*"]
metrics.jmx.config	Configuration file for JMX exporter	""
metrics.jmx.existingConfigmap	Name of existing ConfigMap with JMX exporter configuration	""
metrics.jmx.extraRules	Add extra rules to JMX exporter configuration	""
metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (requires metrics.jmx.enabled to be true)	false
metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
metrics.serviceMonitor.path	Path where JMX exporter serves metrics	/metrics
metrics.serviceMonitor.interval	Interval at which metrics should be scraped	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
metrics.prometheusRule.enabled	if true, creates a Prometheus Operator PrometheusRule (requires metrics.jmx.enabled to be true)	false
metrics.prometheusRule.namespace	Namespace in which Prometheus is running	""
metrics.prometheusRule.labels	Additional labels that can be used so PrometheusRule will be discovered by Prometheus	{}
metrics.prometheusRule.groups	Prometheus Rule Groups for Kafka	[]

Kafka provisioning parameters

Name	Description	Value
provisioning.enabled	Enable kafka provisioning Job	false
provisioning.automountServiceAccountToken	Mount Service Account token in pod	false
provisioning.numPartitions	Default number of partitions for topics when unspecified	1
provisioning.replicationFactor	Default replication factor for topics when unspecified	1
provisioning.topics	Kafka topics to provision	[]
provisioning.nodeSelector	Node labels for pod assignment	{}
provisioning.tolerations	Tolerations for pod assignment	[]
provisioning.extraProvisioningCommands	Extra commands to run to provision cluster resources	[]
provisioning.parallel	Number of provisioning commands to run at the same time	1
provisioning.preScript	Extra bash script to run before topic provisioning. $CLIENT_CONF is path to properties file with most needed configurations	""
provisioning.postScript	Extra bash script to run after topic provisioning. $CLIENT_CONF is path to properties file with most needed configurations	""
provisioning.auth.tls.type	Format to use for TLS certificates. Allowed types: JKS and PEM.	jks
provisioning.auth.tls.certificatesSecret	Existing secret containing the TLS certificates for the Kafka provisioning Job.	""
provisioning.auth.tls.cert	The secret key from the certificatesSecret if ‘cert’ key different from the default (tls.crt)	tls.crt
provisioning.auth.tls.key	The secret key from the certificatesSecret if ‘key’ key different from the default (tls.key)	tls.key
provisioning.auth.tls.caCert	The secret key from the certificatesSecret if ‘caCert’ key different from the default (ca.crt)	ca.crt
provisioning.auth.tls.keystore	The secret key from the certificatesSecret if ‘keystore’ key different from the default (keystore.jks)	keystore.jks
provisioning.auth.tls.truststore	The secret key from the certificatesSecret if ‘truststore’ key different from the default (truststore.jks)	truststore.jks
provisioning.auth.tls.passwordsSecret	Name of the secret containing passwords to access the JKS files or PEM key when they are password-protected.	""
provisioning.auth.tls.keyPasswordSecretKey	The secret key from the passwordsSecret if ‘keyPasswordSecretKey’ key different from the default (key-password)	key-password
provisioning.auth.tls.keystorePasswordSecretKey	The secret key from the passwordsSecret if ‘keystorePasswordSecretKey’ key different from the default (keystore-password)	keystore-password
provisioning.auth.tls.truststorePasswordSecretKey	The secret key from the passwordsSecret if ‘truststorePasswordSecretKey’ key different from the default (truststore-password)	truststore-password
provisioning.auth.tls.keyPassword	Password to access the password-protected PEM key if necessary. Ignored if ‘passwordsSecret’ is provided.	""
provisioning.auth.tls.keystorePassword	Password to access the JKS keystore. Ignored if ‘passwordsSecret’ is provided.	""
provisioning.auth.tls.truststorePassword	Password to access the JKS truststore. Ignored if ‘passwordsSecret’ is provided.	""
provisioning.command	Override provisioning container command	[]
provisioning.args	Override provisioning container arguments	[]
provisioning.extraEnvVars	Extra environment variables to add to the provisioning pod	[]
provisioning.extraEnvVarsCM	ConfigMap with extra environment variables	""
provisioning.extraEnvVarsSecret	Secret with extra environment variables	""
provisioning.podAnnotations	Extra annotations for Kafka provisioning pods	{}
provisioning.podLabels	Extra labels for Kafka provisioning pods	{}
provisioning.serviceAccount.create	Enable creation of ServiceAccount for Kafka provisioning pods	true
provisioning.serviceAccount.name	The name of the service account to use. If not set and create is true, a name is generated	""
provisioning.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
provisioning.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if provisioning.resources is set (provisioning.resources is recommended for production).	micro
provisioning.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
provisioning.podSecurityContext.enabled	Enable security context for the pods	true
provisioning.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
provisioning.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
provisioning.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
provisioning.podSecurityContext.fsGroup	Set Kafka provisioning pod’s Security Context fsGroup	1001
provisioning.podSecurityContext.seccompProfile.type	Set Kafka provisioning pod’s Security Context seccomp profile	RuntimeDefault
provisioning.containerSecurityContext.enabled	Enable Kafka provisioning containers’ Security Context	true
provisioning.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
provisioning.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
provisioning.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
provisioning.containerSecurityContext.runAsNonRoot	Set Kafka provisioning containers’ Security Context runAsNonRoot	true
provisioning.containerSecurityContext.allowPrivilegeEscalation	Set Kafka provisioning containers’ Security Context allowPrivilegeEscalation	false
provisioning.containerSecurityContext.readOnlyRootFilesystem	Set Kafka provisioning containers’ Security Context readOnlyRootFilesystem	true
provisioning.containerSecurityContext.capabilities.drop	Set Kafka provisioning containers’ Security Context capabilities to be dropped	["ALL"]
provisioning.schedulerName	Name of the k8s scheduler (other than default) for kafka provisioning	""
provisioning.enableServiceLinks	Whether information about services should be injected into pod’s environment variable	true
provisioning.extraVolumes	Optionally specify extra list of additional volumes for the Kafka provisioning pod(s)	[]
provisioning.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Kafka provisioning container(s)	[]
provisioning.sidecars	Add additional sidecar containers to the Kafka provisioning pod(s)	[]
provisioning.initContainers	Add additional Add init containers to the Kafka provisioning pod(s)	[]
provisioning.waitForKafka	If true use an init container to wait until kafka is ready before starting provisioning	true
provisioning.useHelmHooks	Flag to indicate usage of helm hooks	true

KRaft chart parameters

Name	Description	Value
kraft.enabled	Switch to enable or disable the KRaft mode for Kafka	true
kraft.existingClusterIdSecret	Name of the secret containing the cluster ID for the Kafka KRaft cluster. This is incompatible with the clusterId parameter. If both are set, the existingClusterIdSecret will be used	""
kraft.clusterId	Kafka Kraft cluster ID. If not set, a random cluster ID will be generated the first time Kraft is initialized.	""
kraft.controllerQuorumVoters	Override the Kafka controller quorum voters of the Kafka Kraft cluster. If not set, it will be automatically configured to use all controller-elegible nodes.	""

ZooKeeper chart parameters

Name	Description	Value
zookeeperChrootPath	Path which puts data under some path in the global ZooKeeper namespace	""
zookeeper.enabled	Switch to enable or disable the ZooKeeper helm chart. Must be false if you use KRaft mode.	false
zookeeper.replicaCount	Number of ZooKeeper nodes	1
zookeeper.auth.client.enabled	Enable ZooKeeper auth	false
zookeeper.auth.client.clientUser	User that will use ZooKeeper client (zkCli.sh) to authenticate. Must exist in the serverUsers comma-separated list.	""
zookeeper.auth.client.clientPassword	Password that will use ZooKeeper client (zkCli.sh) to authenticate. Must exist in the serverPasswords comma-separated list.	""
zookeeper.auth.client.serverUsers	Comma, semicolon or whitespace separated list of user to be created. Specify them as a string, for example: “user1,user2,admin”	""
zookeeper.auth.client.serverPasswords	Comma, semicolon or whitespace separated list of passwords to assign to users when created. Specify them as a string, for example: “pass4user1, pass4user2, pass4admin”	""
zookeeper.persistence.enabled	Enable persistence on ZooKeeper using PVC(s)	true
zookeeper.persistence.storageClass	Persistent Volume storage class	""
zookeeper.persistence.accessModes	Persistent Volume access modes	["ReadWriteOnce"]
zookeeper.persistence.size	Persistent Volume size	8Gi
externalZookeeper.servers	List of external zookeeper servers to use. Typically used in combination with ‘zookeeperChrootPath’. Must be empty if you use KRaft mode.	[]

helm install my-release \
  --set replicaCount=3 \
  oci://REGISTRY_NAME/REPOSITORY_NAME/kafka

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command deploys Kafka with 3 brokers (replicas).

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/kafka

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 30.0.0

This major release bumps the Kafka version to 3.8. Find notable changes in kafka upgrade notes.

To 29.0.0

This major version of Kafka deprecates Kafka Exporter component.

To 28.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.
• The networkPolicy section has been normalized amongst all Bitnami charts. Compared to the previous approach, the values section has been simplified (check the Parameters section) and now it set to enabled=true by default. Egress traffic is allowed by default and ingress traffic is allowed by all pods but only to the ports set in containerPorts and extraContainerPorts.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 26.0.0

This major release bumps the Kafka version to 3.6 kafka upgrade notes.

To 25.0.0

This major updates the Zookeeper subchart to it newest major, 12.0.0. For more information on this subchart’s major, please refer to zookeeper upgrade notes.

To 24.0.0

This major version is a refactor of the Kafka chart and its architecture, to better adapt to Kraft features introduced in version 22.0.0.

The changes introduced in this version are:

• New architecture. The chart now has two statefulsets, one for controller-eligible nodes (controller or controller+broker) and another one for broker-only nodes. Please take a look at the subsections Upgrading from Kraft mode and Upgrading from Zookeeper mode for more information about how to upgrade this chart depending on which mode you were using.

  The new architecture is designed to support two main features: - Deployment of dedicated nodes - Support for Zookeeper to Kraft migration

• Adds compatibility with securityContext.readOnlyRootFs=true, which is now the execution default.

  • The Kafka configuration is now mounted as a ConfigMap instead of generated at runtime.
  • Due to the implementation of readOnlyRootFs support, the following settings have been removed and will now rely on Kafka defaults. To override them, please use extraConfig to extend your Kafka configuration instead.
  • deleteTopicEnable
  • autoCreateTopicsEnable
  • logFlushIntervalMessages
  • logFlushIntervalMs
  • logRetentionBytes
  • logRetentionCheckIntervalMs
  • logRetentionHours
  • logSegmentBytes
  • logsDirs
  • maxMessageBytes
  • defaultReplicationFactor
  • offsetsTopicReplicationFactor
  • transactionStateLogReplicationFactor
  • transactionStateLogMinIsr
  • numIoThreads
  • numNetworkThreads
  • numPartitions
  • numRecoveryThreadsPerDataDir
  • socketReceiveBufferBytes
  • socketRequestMaxBytes
  • socketSendBufferBytes
  • zookeeperConnectionTimeoutMs
  • authorizerClassName
  • allowEveryoneIfNoAclFound
  • superUsers
• All listeners are configured with protocol ‘SASL_PLAINTEXT’ by default.
• Support for SCRAM authentication in KRaft mode
• All statefulset settings have been moved from values’ root to controller.* and broker.*.
• Refactor of listeners configuration:
  • Settings listeners, advertisedListeners and listenerSecurityProtocolMap have been replaced with listeners.* object, which includes default listeners and each listener can be configured individually and extended using listeners.extraListeners.
  • Values interBrokerListenerName, allowPlaintextListener have been removed.
• Refactor of SASL, SSL and ACL settings:
  • Authentication nomenclature plaintext,tls,mtls,sasl,sasl_tls has been removed. Listeners are now configured using Kafka nomenclature PLAINTEXT,SASL_PLAINTEXT,SASL_SSL,SSL in listeners.*.protocol.
  • mTLS is configured by default for SSL protocol listeners, while it can now also be configured for SASL_SSL listeners if listener.*.sslClientAuth is set.
  • All SASL settings are now grouped under sasl.*.
  • auth.sasl.mechanisms -> sasl.enabledMechanisms
  • auth.interBrokerMechanism -> sasl.interBrokerMechanism
  • auth.sasl.jaas.clientUSers -> sasl.client.users
  • auth.sasl.jaas.clientPasswords -> sasl.client.passwords
  • auth.sasl.jaas.interBrokerUser -> sasl.interbroker.user
  • auth.sasl.jaas.interBrokerPassword -> sasl.interbroker.password
  • auth.sasl.jaas.zookeeperUser -> sasl.zookeeper.user
  • auth.sasl.jaas.zookeeperPassword -> sasl.zookeeper.password
  • auth.sasl.jaas.existingSecret -> sasl.existingSecret
  • Added support for Controller listener protocols other than PLAINTEXT.
  • TLS settings have been moved from auth.tls.* to tls.*.
  • Zookeeper TLS settings have been moved from auth.zookeeper* to tls.zookeeper.*
• Refactor externalAccess to support the new architecture:
  • externalAccess.service.* have been renamed to externalAccess.controller.service.* and externalAccess.broker.service.*.
  • Controller pods will not configure externalAccess unless either:
  • controller.controllerOnly=false (default), meaning the pods are running as ‘controller+broker’ nodes; or
  • externalAccess.controller.service.forceExpose=true, for use cases where controller-only nodes want to be exposed externally.
• TLS certificates value tls.existingSecret no longer supports an array of secrets (1 secret per node). It now accepts a single secret containing multiple certificates named kafka-<role>-<pod-number> for each Kafka pod, or alternatively, a single certificate shared by all Kafka nodes using wildcard CN and/or SubjectAltNames. NOTE: If using CertManager to automatically generate the certificate secrets, only the single certificate approach would be supported.

Upgrading from Kraft mode

If upgrading from Kraft mode, existing PVCs from Kafka containers should be reattached to ‘controller’ pods.

Upgrading from Zookeeper mode

If upgrading from Zookeeper mode, make sure you set ‘controller.replicaCount=0’ and reattach the existing PVCs to ‘broker’ pods. This will allow you to perform a migration to Kraft mode in the future by following the following section.

Migrating from Zookeeper (Early access)

This guide is an adaptation from upstream documentation: Migrate from ZooKeeper to KRaft

1. Retrieve the cluster ID from Zookeeper:

   $ kubectl exec -it <your-zookeeper-pod> -- zkCli.sh get /cluster/id
   /opt/bitnami/java/bin/java
   Connecting to localhost:2181
   
   WATCHER::
   
   WatchedEvent state:SyncConnected type:None path:null
   {"version":"1","id":"TEr3HVPvTqSWixWRHngP5g"}
   

2. Deploy at least one Kraft controller-only in your deployment and enable zookeeperMigrationMode=true. The Kraft controllers will migrate the data from your Kafka ZkBroker to Kraft mode.

   To do so add the following values to your Zookeeper deployment when upgrading:

   controller:
     replicaCount: 1
     controllerOnly: true
     zookeeperMigrationMode: true
     # If needed, set controllers minID to avoid conflict with your ZK brokers' ids.
     # minID: 0
   broker:
     zookeeperMigrationMode: true
   kraft:
     enabled: true
     clusterId: "<your_cluster_id>"
   

3. Wait until until all brokers are ready. You should see the following log in the broker logs:

   INFO [KafkaServer id=100] Finished catching up on KRaft metadata log, requesting that the KRaft controller unfence this broker (kafka.server.KafkaServer)
   INFO [BrokerLifecycleManager id=100 isZkBroker=true] The broker has been unfenced. Transitioning from RECOVERY to RUNNING. (kafka.server.BrokerLifecycleManager)
   

   In the controllers, the following message should show up:

   Transitioning ZK migration state from PRE_MIGRATION to MIGRATION (org.apache.kafka.controller.FeatureControlManager)
   

4. Once all brokers have been successfully migrated, set broker.zookeeperMigrationMode=false to fully migrate them.

   broker:
     zookeeperMigrationMode: false
   

5. To conclude the migration, switch off migration mode on controllers and stop Zookeeper:

   controller:
     zookeeperMigrationMode: false
   zookeeper:
     enabled: false
   

   After migration is complete, you should see the following message in your controllers:

   [2023-07-13 13:07:45,226] INFO [QuorumController id=1] Transitioning ZK migration state from MIGRATION to POST_MIGRATION (org.apache.kafka.controller.FeatureControlManager)
   

6. (Optional) If you would like to switch to a non-dedicated cluster, set controller.controllerOnly=false. This will cause controller-only nodes to switch to controller+broker nodes.

   At that point, you could manually decommission broker-only nodes by reassigning its partitions to controller-eligible nodes.

   For more information about decommissioning kafka broker check the Kafka documentation.

Retaining PersistentVolumes

When upgrading the Kafka chart, you may want to retain your existing data. To do so, we recommend following this guide:

NOTE: This guide requires the binaries ‘kubectl’ and ‘jq’.

# Env variables
REPLICA=0
OLD_PVC="data-<your_release_name>-kafka-${REPLICA}"
NEW_PVC="data-<your_release_name>-kafka-<your_kafka_role>-${REPLICA}"
PV_NAME=$(kubectl get pvc $OLD_PVC -o jsonpath="{.spec.volumeName}")
NEW_PVC_MANIFEST_FILE="$NEW_PVC.yaml"

# Modify PV reclaim policy
kubectl patch pv $PV_NAME -p '{"spec":{"persistentVolumeReclaimPolicy":"Retain"}}'
# Manually check field 'RECLAIM POLICY'
kubectl get pv $PV_NAME

# Create new PVC manifest
kubectl get pvc $OLD_PVC -o json | jq "
  .metadata.name = \"$NEW_PVC\"
  | with_entries(
      select([.key] |
        inside([\"metadata\", \"spec\", \"apiVersion\", \"kind\"]))
    )
  | del(
      .metadata.annotations, .metadata.creationTimestamp,
      .metadata.finalizers, .metadata.resourceVersion,
      .metadata.selfLink, .metadata.uid
    )
  " > $NEW_PVC_MANIFEST_FILE
# Check manifest
cat $NEW_PVC_MANIFEST_FILE

# Delete your old Statefulset and PVC
kubectl delete sts "<your_release_name>-kafka"
kubectl delete pvc $OLD_PVC
# Make PV available again and create the new PVC
kubectl patch pv $PV_NAME -p '{"spec":{"claimRef": null}}'
kubectl apply -f $NEW_PVC_MANIFEST_FILE

Repeat this process for each replica you had in your Kafka cluster. Once completed, upgrade the cluster and the new Statefulset should reuse the existing PVCs.

To 23.0.0

This major updates Kafka to its newest version, 3.5.x. For more information, please refer to kafka upgrade notes.

To 22.0.0

This major updates the Kafka’s configuration to use Kraft by default. You can learn more about this configuration here. Apart from seting the kraft.enabled parameter to true, we also made the following changes:

• Renamed minBrokerId parameter to minId to set the minimum ID to use when configuring the node.id or broker.id parameter depending on the Kafka’s configuration. This parameter sets the KAFKA_CFG_NODE_ID env var in the container.
• Updated the containerPorts and service.ports parameters to include the new controller port.

To 21.0.0

This major updates Kafka to its newest version, 3.4.x. For more information, please refer to kafka upgrade notes.

To 20.0.0

This major updates the Zookeeper subchart to it newest major, 11.0.0. For more information on this subchart’s major, please refer to zookeeper upgrade notes.

To 19.0.0

This major updates Kafka to its newest version, 3.3.x. For more information, please refer to kafka upgrade notes.

To 18.0.0

This major updates the Zookeeper subchart to it newest major, 10.0.0. For more information on this subchart’s major, please refer to zookeeper upgrade notes.

To 16.0.0

This major updates the Zookeeper subchart to it newest major, 9.0.0. For more information on this subchart’s major, please refer to zookeeper upgrade notes.

To 15.0.0

This major release bumps Kafka major version to 3.x series. It also renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repository. Some affected values are:

• service.port, service.internalPort and service.externalPort have been regrouped under the service.ports map.
• metrics.kafka.service.port has been regrouped under the metrics.kafka.service.ports map.
• metrics.jmx.service.port has been regrouped under the metrics.jmx.service.ports map.
• updateStrategy (string) and rollingUpdatePartition are regrouped under the updateStrategy map.
• Several parameters marked as deprecated 14.x.x are not supported anymore.

Additionally updates the ZooKeeper subchart to it newest major, 8.0.0, which contains similar changes.

To 14.0.0

In this version, the image block is defined once and is used in the different templates, while in the previous version, the image block was duplicated for the main container and the provisioning one

image:
  registry: docker.io
  repository: bitnami/kafka
  tag: 2.8.0

VS

image:
  registry: docker.io
  repository: bitnami/kafka
  tag: 2.8.0
...
provisioning:
  image:
    registry: docker.io
    repository: bitnami/kafka
    tag: 2.8.0

See PR#7114 for more info about the implemented changes

To 13.0.0

This major updates the Zookeeper subchart to it newest major, 7.0.0, which renames all TLS-related settings. For more information on this subchart’s major, please refer to zookeeper upgrade notes.

To 12.2.0

This version also introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 12.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn’t face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn’t support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://docs.vmware.com/en/VMware-Tanzu-Application-Catalog/services/tutorials/GUID-resolve-helm2-helm3-post-migration-issues-index.html
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 11.8.0

External access to brokers can now be achieved through the cluster’s Kafka service.

• service.nodePort -> deprecated in favor of service.nodePorts.client and service.nodePorts.external

To 11.7.0

The way to configure the users and passwords changed. Now it is allowed to create multiple users during the installation by providing the list of users and passwords.

• auth.jaas.clientUser (string) -> deprecated in favor of auth.jaas.clientUsers (array).
• auth.jaas.clientPassword (string) -> deprecated in favor of auth.jaas.clientPasswords (array).

To 11.0.0

The way to configure listeners and athentication on Kafka is totally refactored allowing users to configure different authentication protocols on different listeners. Please check the Listeners Configuration section for more information.

Backwards compatibility is not guaranteed you adapt your values.yaml to the new format. Here you can find some parameters that were renamed or disappeared in favor of new ones on this major version:

• auth.enabled -> deprecated in favor of auth.clientProtocol and auth.interBrokerProtocol parameters.
• auth.ssl -> deprecated in favor of auth.clientProtocol and auth.interBrokerProtocol parameters.
• auth.certificatesSecret -> renamed to auth.jksSecret.
• auth.certificatesPassword -> renamed to auth.jksPassword.
• sslEndpointIdentificationAlgorithm -> renamedo to auth.tlsEndpointIdentificationAlgorithm.
• auth.interBrokerUser -> renamed to auth.jaas.interBrokerUser
• auth.interBrokerPassword -> renamed to auth.jaas.interBrokerPassword
• auth.zookeeperUser -> renamed to auth.jaas.zookeeperUser
• auth.zookeeperPassword -> renamed to auth.jaas.zookeeperPassword
• auth.existingSecret -> renamed to auth.jaas.existingSecret
• service.sslPort -> deprecated in favor of service.internalPort
• service.nodePorts.kafka and service.nodePorts.ssl -> deprecated in favor of service.nodePort
• metrics.kafka.extraFlag -> new parameter
• metrics.kafka.certificatesSecret -> new parameter

To 10.0.0

If you are setting the config or log4j parameter, backwards compatibility is not guaranteed, because the KAFKA_MOUNTED_CONFDIR has moved from /opt/bitnami/kafka/conf to /bitnami/kafka/config. In order to continue using these parameters, you must also upgrade your image to docker.io/bitnami/kafka:2.4.1-debian-10-r38 or later.

To 9.0.0

Backwards compatibility is not guaranteed you adapt your values.yaml to the new format. Here you can find some parameters that were renamed on this major version:

- securityContext.enabled
- securityContext.fsGroup
- securityContext.fsGroup
+ podSecurityContext
- externalAccess.service.loadBalancerIP
+ externalAccess.service.loadBalancerIPs
- externalAccess.service.nodePort
+ externalAccess.service.nodePorts
- metrics.jmx.configMap.enabled
- metrics.jmx.configMap.overrideConfig
+ metrics.jmx.config
- metrics.jmx.configMap.overrideName
+ metrics.jmx.existingConfigmap

Ports names were prefixed with the protocol to comply with Istio (see https://istio.io/docs/ops/deployment/requirements/).

To 8.0.0

There is not backwards compatibility since the brokerID changes to the POD_NAME. For more information see this PR.

To 7.0.0

Backwards compatibility is not guaranteed when Kafka metrics are enabled, unless you modify the labels used on the exporter deployments. Use the workaround below to upgrade from versions previous to 7.0.0. The following example assumes that the release name is kafka:

helm upgrade kafka oci://REGISTRY_NAME/REPOSITORY_NAME/kafka --version 6.1.8 --set metrics.kafka.enabled=false
helm upgrade kafka oci://REGISTRY_NAME/REPOSITORY_NAME/kafka --version 7.0.0 --set metrics.kafka.enabled=true

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

To 2.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart’s deployments. Use the workaround below to upgrade from versions previous to 2.0.0. The following example assumes that the release name is kafka:

kubectl delete statefulset kafka-kafka --cascade=false
kubectl delete statefulset kafka-zookeeper --cascade=false

To 1.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart’s deployments. Use the workaround below to upgrade from versions previous to 1.0.0. The following example assumes that the release name is kafka:

kubectl delete statefulset kafka-kafka --cascade=false
kubectl delete statefulset kafka-zookeeper --cascade=false

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.