Bitnami package for Kiam

kiam is a proxy that captures AWS Metadata API requests. It allows AWS IAM roles to be set for Kubernetes workloads.

Overview of Kiam

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/kiam

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.

This chart bootstraps a kiam deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+ in AWS
• Helm 3.8.0+

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/kiam

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy a kiam application on the Kubernetes cluster in the default configuration.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling vs Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Add extra environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the server.extraEnvVars and agent.extraEnvVars property.

server:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the server.extraEnvVarsCM, agent.extraEnvVarsCM or the server.extraEnvVarsSecret and agent.extraEnvVarsSecret values.

Configure Sidecars and Init Containers

If additional containers are needed in the same pod as Kiam (such as additional metrics or logging exporters), they can be defined using the sidecars parameter.

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:

service:
  extraPorts:
  - name: extraPort
    port: 11311
    targetPort: 11311

NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the --enable-metrics=true parameter at deployment time. The sidecars parameter should therefore only be used for any extra sidecar containers.

If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Learn more about sidecar containers and init containers.

Deploy extra resources

There are cases where you may want to deploy extra objects, such a ConfigMap containing your app’s configuration or some extra deployment with a micro service used by your app. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter.

Set Pod affinity

This chart allows you to set your custom affinity using the server.affinity and agent.affinity parameters. Find more information about Pod affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the server.podAffinityPreset, agent.podAffinityPreset, server.podAntiAffinityPreset, agent.podAntiAffinityPreset, or server.nodeAffinityPreset and agent.nodeAffinityPreset parameters.

Configure TLS Secrets

This chart will facilitate the creation of TLS secrets for use with kiam. There are three common use cases:

• Helm auto-generates the certificates.
• User specifies the certificates in the values.
• User generates/manages certificates separately.

By default the first use case will be applied. In the second case, a certificate and a key are needed.

• The certificate files should look like the example below. There may be more than one certificate if there is a certificate chain.

  -----BEGIN CERTIFICATE-----
  MIID6TCCAtGgAwIBAgIJAIaCwivkeB5EMA0GCSqGSIb3DQEBCwUAMFYxCzAJBgNV
  ...
  jScrvkiBO65F46KioCL9h5tDvomdU1aqpI/CBzhvZn1c0ZTf87tGQR8NK7v7
  -----END CERTIFICATE-----
  

• The certificate keys should look like this:

  -----BEGIN RSA PRIVATE KEY-----
  MIIEogIBAAKCAQEAvLYcyu8f3skuRyUgeeNpeDvYBCDcgq+LsWap6zbX5f8oLqp4
  ...
  wrj2wDbCDCFmfqnSJ+dKI3vFLlEz44sAV8jX/kd4Y6ZTQhlLbYc=
  -----END RSA PRIVATE KEY-----
  

If using the values file to manage the certificates, copy the above values into the server.tlsFiles.cert, server.tlsFiles.ca and server.tlsFiles.key or agent.tlsFiles.cert, agent.tlsFiles.ca and agent.tlsFiles.key parameters respectively.

If managing TLS secrets outside of Helm, it is possible to create a TLS secret (named kiam.local-tls, for example) and set it using the server.tlsSecret or agent.tlsSecret parameters.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Force target Kubernetes version (using Helm capabilities if not set)	""
nameOverride	Release name override	""
fullnameOverride	Release full name override	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the the deployment(s)/statefulset(s)	["sleep"]
diagnosticMode.args	Args to override all containers in the the deployment(s)/statefulset(s)	["infinity"]

kiam image parameters

Name	Description	Value
image.registry	kiam image registry	REGISTRY_NAME
image.repository	kiam image name	REPOSITORY_NAME/kiam
image.digest	kiam image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	kiam image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]

kiam server parameters

Name	Description	Value
server.enabled	Deploy the kiam server	true
server.containerPort	HTTPS port to expose at container level	8443
server.resourceType	Specify how to deploy the server (allowed values: daemonset and deployment)	daemonset
server.automountServiceAccountToken	Mount Service Account token in pod	true
server.hostAliases	Add deployment host aliases	[]
server.useHostNetwork	Use host networking (ports will be directly exposed in the host)	false
server.replicaCount	Number of replicas to deploy (when server.resourceType is daemonset)	1
server.logJsonOutput	Use JSON format for logs	true
server.logLevel	Logging level	info
server.sslCertHostPath	Path to the host system SSL certificates (necessary for contacting the AWS metadata server)	/etc/ssl/certs
server.podSecurityPolicy.create	Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later	true
server.podSecurityPolicy.allowedHostPaths	Extra host paths to allow in the PodSecurityPolicy	[]
server.priorityClassName	Server priorityClassName	""
server.schedulerName	Name of the k8s scheduler (other than default)	""
server.topologySpreadConstraints	Topology Spread Constraints for pod assignment	[]
server.startupProbe.enabled	Enable startupProbe	false
server.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
server.startupProbe.periodSeconds	Period seconds for startupProbe	30
server.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
server.startupProbe.failureThreshold	Failure threshold for startupProbe	5
server.startupProbe.successThreshold	Success threshold for startupProbe	1
server.livenessProbe.enabled	Enable livenessProbe	true
server.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
server.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
server.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
server.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
server.livenessProbe.successThreshold	Success threshold for livenessProbe	1
server.readinessProbe.enabled	Enable readinessProbe	true
server.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
server.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
server.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
server.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
server.readinessProbe.successThreshold	Success threshold for readinessProbe	1
server.customStartupProbe	Override default startup probe	{}
server.customLivenessProbe	Override default liveness probe	{}
server.customReadinessProbe	Override default readiness probe	{}
server.extraArgs	Extra arguments to add to the default kiam command	{}
server.command	Override kiam default command	[]
server.args	Override kiam default args	[]
server.tlsFiles	Base64-encoded PEM values for server’s CA certificate(s), certificate and private key	{}
server.gatewayTimeoutCreation	Timeout when creating the kiam gateway	1s
server.tlsSecret	Name of a secret with TLS certificates for the container	""
server.dnsPolicy	Pod DNS policy	Default
server.roleBaseArn	Base ARN for IAM roles. If not set kiam will detect it automatically	""
server.cacheSyncInterval	Cache synchronization interval	1m
server.assumeRoleArn	IAM role for the server to assume	""
server.sessionDuration	Session duration for STS tokens	15m
server.tlsCerts	Agent TLS Certificate filenames	{}
server.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if server.resources is set (server.resources is recommended for production).	nano
server.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
server.containerSecurityContext.enabled	Enabled containers’ Security Context	true
server.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
server.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
server.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
server.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	false
server.containerSecurityContext.privileged	Set container’s Security Context privileged	false
server.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
server.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
server.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
server.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
server.podSecurityContext.enabled	Enabled kiam server pods’ Security Context	true
server.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
server.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
server.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
server.podSecurityContext.fsGroup	Set kiam server pod’s Security Context fsGroup	1001
server.podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
server.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
server.nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
server.nodeAffinityPreset.key	Node label key to match. Ignored if affinity is set.	""
server.nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set.	[]
server.affinity	Affinity for pod assignment	{}
server.nodeSelector	Node labels for pod assignment	{}
server.tolerations	Tolerations for pod assignment	[]
server.podLabels	Extra labels for kiam pods	{}
server.podAnnotations	Annotations for kiam pods	{}
server.lifecycleHooks	lifecycleHooks for the kiam server container to automate configuration before or after startup.	{}
server.updateStrategy.type	Update strategy - only really applicable for deployments with RWO PVs attached	RollingUpdate
server.extraEnvVars	Array containing extra env vars to configure kiam server	[]
server.extraEnvVarsCM	ConfigMap containing extra env vars to configure kiam server	""
server.extraEnvVarsSecret	Secret containing extra env vars to configure kiam server (in case of sensitive data)	""
server.extraVolumes	Optionally specify extra list of additional volumes for kiam pods	[]
server.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for kiam container(s)	[]
server.initContainers	Add additional init containers to the kiam pods	[]
server.pdb.create	Enable/disable a Pod Disruption Budget creation	true
server.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
server.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both server.pdb.minAvailable and server.pdb.maxUnavailable are empty.	""
server.sidecars	Add additional sidecar containers to the kiam pods	[]

kiam server exposure parameters

Name	Description	Value
server.service.type	Kubernetes service type	ClusterIP
server.service.port	Service grpc-lb port	8443
server.service.nodePorts	Specify the nodePort values for the LoadBalancer and NodePort service types.	{}
server.service.clusterIP	kiam service clusterIP IP	None
server.service.loadBalancerIP	loadBalancerIP if service type is LoadBalancer	""
server.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
server.service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
server.service.externalTrafficPolicy	Enable client source IP preservation	Cluster
server.service.annotations	Annotations for kiam service	{}
server.service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
server.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
server.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
server.networkPolicy.allowExternal	Don’t require server label for connections	true
server.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
server.networkPolicy.kubeAPIServerPorts	List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)	[]
server.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
server.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
server.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
server.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

kiam server Service Account parameters

Name	Description	Value
server.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
server.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
server.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
server.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}

kiam server metrics parameters

Name	Description	Value
server.metrics.enabled	Enable exposing kiam statistics	false
server.metrics.port	Metrics port	9621
server.metrics.syncInterval	Metrics synchronization interval statistics	5s
server.metrics.annotations	Annotations for enabling prometheus to access the metrics endpoints	{}
server.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using PrometheusOperator	false
server.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
server.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
server.metrics.serviceMonitor.interval	Interval at which metrics should be scraped	30s
server.metrics.serviceMonitor.metricRelabelings	Specify Metric Relabellings to add to the scrape endpoint	[]
server.metrics.serviceMonitor.relabelings	Specify Relabelings to add to the scrape endpoint	[]
server.metrics.serviceMonitor.scrapeTimeout	Specify the timeout after which the scrape is ended	""
server.metrics.serviceMonitor.selector	metrics service selector	{}
server.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
server.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false

kiam agent parameters

Name	Description	Value
agent.enabled	Deploy the kiam agent	true
agent.logJsonOutput	Use JSON format for logs	true
agent.logLevel	Logging level	info
agent.priorityClassName	Server priorityClassName	""
agent.schedulerName	Name of the k8s scheduler (other than default)	""
agent.topologySpreadConstraints	Topology Spread Constraints for pod assignment	[]
agent.allowRouteRegExp	Regexp with the allowed paths for agents to redirect	""
agent.automountServiceAccountToken	Mount Service Account token in pod	false
agent.hostAliases	Add deployment host aliases	[]
agent.containerPort	HTTPS port to expose at container level	8183
agent.iptables	Have the agent modify the host iptables rules	false
agent.iptablesRemoveOnShutdown	Remove iptables rules when shutting down the agent node	false
agent.hostInterface	Interface for agents for redirecting requests	cali+
agent.keepaliveParams.permitWithoutStream	Permit keepalive without stream	false
agent.keepaliveParams.time	Keepalive time	""
agent.keepaliveParams.timeout	Keepalive timeout	""
agent.enableDeepProbe	Use the probes using the /health endpoint	false
agent.dnsPolicy	Pod DNS policy	ClusterFirstWithHostNet
agent.sslCertHostPath	Path to the host system SSL certificates (necessary for contacting the AWS metadata agent)	/etc/ssl/certs
agent.tlsFiles	Base64-encoded PEM values for server’s CA certificate(s), certificate and private key	{}
agent.podSecurityPolicy.create	Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later	true
agent.podSecurityPolicy.allowedHostPaths	Extra host paths to allow in the PodSecurityPolicy	[]
agent.tlsSecret	Name of a secret with TLS certificates for the container	""
agent.useHostNetwork	Use host networking (ports will be directly exposed in the host)	true
agent.tlsCerts	Agent TLS Certificate filenames	{}
agent.startupProbe.enabled	Enable startupProbe	false
agent.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
agent.startupProbe.periodSeconds	Period seconds for startupProbe	30
agent.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
agent.startupProbe.failureThreshold	Failure threshold for startupProbe	5
agent.startupProbe.successThreshold	Success threshold for startupProbe	1
agent.livenessProbe.enabled	Enable livenessProbe	true
agent.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
agent.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
agent.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
agent.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
agent.livenessProbe.successThreshold	Success threshold for livenessProbe	1
agent.readinessProbe.enabled	Enable readinessProbe	true
agent.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
agent.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
agent.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
agent.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
agent.readinessProbe.successThreshold	Success threshold for readinessProbe	1
agent.customStartupProbe	Override default startup probe	{}
agent.customLivenessProbe	Override default liveness probe	{}
agent.customReadinessProbe	Override default readiness probe	{}
agent.extraArgs	Extra arguments to add to the default kiam command	{}
agent.gatewayTimeoutCreation	Timeout when creating the kiam gateway	1s
agent.command	Override kiam default command	[]
agent.args	Override kiam default args	[]
agent.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if agent.resources is set (agent.resources is recommended for production).	nano
agent.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
agent.containerSecurityContext.enabled	Enabled containers’ Security Context	true
agent.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
agent.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	0
agent.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	0
agent.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	false
agent.containerSecurityContext.privileged	Set container’s Security Context privileged	false
agent.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
agent.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
agent.containerSecurityContext.capabilities.add	List of capabilities to be added	["NET_ADMIN"]
agent.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
agent.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
agent.podSecurityContext.enabled	Enabled agent pods’ Security Context	true
agent.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
agent.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
agent.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
agent.podSecurityContext.fsGroup	Set agent pod’s Security Context fsGroup	1001
agent.podAffinityPreset	Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
agent.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
agent.nodeAffinityPreset.type	Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
agent.nodeAffinityPreset.key	Node label key to match. Ignored if affinity is set.	""
agent.nodeAffinityPreset.values	Node label values to match. Ignored if affinity is set.	[]
agent.affinity	Affinity for pod assignment	{}
agent.nodeSelector	Node labels for pod assignment	{}
agent.tolerations	Tolerations for pod assignment	[]
agent.podLabels	Extra labels for kiam pods	{}
agent.podAnnotations	Annotations for kiam pods	{}
agent.lifecycleHooks	LifecycleHooks to set additional configuration at startup.	{}
agent.updateStrategy.type	Update strategy - only really applicable for deployments with RWO PVs attached	RollingUpdate
agent.extraEnvVars	Array containing extra env vars to configure kiam agent	[]
agent.extraEnvVarsCM	ConfigMap containing extra env vars to configure kiam agent	""
agent.extraEnvVarsSecret	Secret containing extra env vars to configure kiam agent (in case of sensitive data)	""
agent.extraVolumes	Optionally specify extra list of additional volumes for kiam pods	[]
agent.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for kiam container(s)	[]
agent.initContainers	Add additional init containers to the kiam pods	[]
agent.sidecars	Add additional sidecar containers to the kiam pods	[]

kiam agent exposure parameters

Name	Description	Value
agent.service.type	Kubernetes service type	ClusterIP
agent.service.nodePorts	Specify the nodePort values for the LoadBalancer and NodePort service types.	{}
agent.service.clusterIP	kiam service clusterIP IP	""
agent.service.loadBalancerIP	loadBalancerIP if service type is LoadBalancer	""
agent.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
agent.service.externalTrafficPolicy	Enable client source IP preservation	Cluster
agent.service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
agent.service.annotations	Annotations for kiam service	{}
agent.service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
agent.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
agent.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
agent.networkPolicy.allowExternal	Don’t require server label for connections	true
agent.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
agent.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
agent.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
agent.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
agent.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

kiam agent Service Account parameters

Name	Description	Value
agent.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
agent.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
agent.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
agent.serviceAccount.annotations	Annotations for service account. Evaluated as a template. Only used if create is true.	{}

kiam agent metrics parameters

Name	Description	Value
agent.metrics.enabled	Enable exposing kiam statistics	false
agent.metrics.port	Service HTTP management port	9620
agent.metrics.syncInterval	Metrics synchronization interval statistics	5s
agent.metrics.annotations	Annotations for enabling prometheus to access the metrics endpoints	{}
agent.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using PrometheusOperator	false
agent.metrics.serviceMonitor.namespace	Namespace which Prometheus is running in	""
agent.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
agent.metrics.serviceMonitor.interval	Interval at which metrics should be scraped	30s
agent.metrics.serviceMonitor.metricRelabelings	Specify Metric Relabelings to add to the scrape endpoint	[]
agent.metrics.serviceMonitor.relabelings	Specify Relabelings to add to the scrape endpoint	[]
agent.metrics.serviceMonitor.scrapeTimeout	Specify the timeout after which the scrape is ended	""
agent.metrics.serviceMonitor.selector	metrics service selector	{}
agent.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
agent.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false

RBAC parameters

Name	Description	Value
rbac.create	Whether to create and use RBAC resources or not	true

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release --set server.resourceType=deployment oci://REGISTRY_NAME/REPOSITORY_NAME/kiam

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the server nodes to be deployed as Deployment objects.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/kiam

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 2.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 1.0.0

Kiam version was updated from 3.6.0 to 4.0.0, there are no relevant changes in the chart itself. According to the official documentation, this new major introduces the following breaking changes at application level:

• The role policy is now applied after the role ARN has been resolved, this may cause compatibility issues with existing iam.amazonaws.com/permitted restrictions.
• StatsD metrics have been removed.
• A number of agent flags have changed.

For further information, you may check the official notes covering upgrade details.

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.