Bitnami package for Mastodon
Mastodon is self-hosted social network server based on ActivityPub. Written in Ruby, features real-time updates, multimedia attachments and no vendor lock-in.
Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.
TL;DR
helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/mastodon
Note: You need to substitute the placeholders
REGISTRY_NAMEandREPOSITORY_NAMEwith a reference to your Helm chart registry and repository.
Introduction
Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.
This chart bootstraps an Mastodon Deployment in a Kubernetes cluster using the Helm package manager.
Bitnami charts can be used with Kubeapps for deployment and management of Helm charts in clusters.
Prerequisites
- Kubernetes 1.23+
- Helm 3.8.0+
- PV provisioner support in the underlying infrastructure
Installing the Chart
To install the chart with the release name my-release:
helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/mastodon
Note: You need to substitute the placeholders
REGISTRY_NAMEandREPOSITORY_NAMEwith a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to useREGISTRY_NAME=registry-1.docker.ioandREPOSITORY_NAME=bitnamicharts.
The command deploys Mastodon on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.
Tip: List all releases using
helm list
Configuration and installation details
Resource requests and limits
Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.
To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.
Rolling VS Immutable tags
It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.
Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.
External database support
You may want to have Mastodon connect to an external database rather than installing one inside your cluster. Typical reasons for this are to use a managed database service, or to share a common database server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalDatabase parameter. You should also disable the MongoDB installation with the postgresql.enabled option. Here is an example:
postgresql.enabled=false
externalDatabase.host=myexternalhost
externalDatabase.user=myuser
externalDatabase.password=mypassword
externalDatabase.database=mydatabase
externalDatabase.port=5432
External redis support
You may want to have mastodon connect to an external redis rather than installing one inside your cluster. Typical reasons for this are to use a managed redis service, or to share a common redis server for all your applications. To achieve this, the chart allows you to specify credentials for an external redis with the externalRedis parameter. You should also disable the Redis installation with the redis.enabled option. Here is an example:
redis.enabled=false
externalRedis.host=myexternalhost
externalRedis.password=mypassword
externalRedis.port=6379
External elasticsearch support
You may want to have mastodon connect to an external elasticsearch rather than installing one inside your cluster. Typical reasons for this are to use a managed elasticsearch service, or to share a common elasticsearch server for all your applications. To achieve this, the chart allows you to specify credentials for an external elasticsearch with the externalElasticsearch parameter. You should also disable the Redis installation with the elasticsearch.enabled option. Here is an example:
elasticsearch.enabled=false
externalElasticsearch.host=myexternalhost
externalElasticsearch.password=mypassword
externalElasticsearch.port=9200
External S3 support
You may want to have mastodon connect to an external storage streaming rather than installing MiniIO(TM) inside your cluster. To achieve this, the chart allows you to specify credentials for an external storage streaming with the externalS3 parameter. You should also disable the MinIO(TM) installation with the minio.enabled option. Here is an example:
minio.enabled=false
externalS3.host=myexternalhost
exterernalS3.accessKeyID=accesskey
externalS3.accessKeySecret=secret
Ingress
This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.To enable Ingress integration, set apache.ingress.enabled to true.
The most common scenario is to have one host name mapped to the deployment. In this case, the apache.ingress.hostname property can be used to set the host name. The apache.ingress.tls parameter can be used to add the TLS configuration for this host.
However, it is also possible to have more than one host. To facilitate this, the apache.ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The apache.ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.
NOTE: For each host specified in the
apache.ingress.extraHostsparameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.
Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.
Learn more about Ingress controllers.
TLS secrets
This chart facilitates the creation of TLS secrets for use with the Ingress controller (although this is not mandatory). There are several common use cases:
- Generate certificate secrets based on chart parameters.
- Enable externally generated certificates.
- Manage application certificates via an external service (like cert-manager).
- Create self-signed certificates within the chart (if supported).
In the first two cases, a certificate and a key are needed. Files are expected in .pem format.
Here is an example of a certificate file:
NOTE: There may be more than one certificate if there is a certificate chain.
-----BEGIN CERTIFICATE-----
MIID6TCCAtGgAwIBAgIJAIaCwivkeB5EMA0GCSqGSIb3DQEBCwUAMFYxCzAJBgNV
...
jScrvkiBO65F46KioCL9h5tDvomdU1aqpI/CBzhvZn1c0ZTf87tGQR8NK7v7
-----END CERTIFICATE-----
Here is an example of a certificate key:
-----BEGIN RSA PRIVATE KEY-----
MIIEogIBAAKCAQEAvLYcyu8f3skuRyUgeeNpeDvYBCDcgq+LsWap6zbX5f8oLqp4
...
wrj2wDbCDCFmfqnSJ+dKI3vFLlEz44sAV8jX/kd4Y6ZTQhlLbYc=
-----END RSA PRIVATE KEY-----
- If using Helm to manage the certificates based on the parameters, copy these values into the
certificateandkeyvalues for a given*.ingress.secretsentry. - If managing TLS secrets separately, it is necessary to create a TLS secret with name
INGRESS_HOSTNAME-tls(where INGRESS_HOSTNAME is a placeholder to be replaced with the hostname you set using the*.ingress.hostnameparameter). - If your cluster has a cert-manager add-on to automate the management and issuance of TLS certificates, add to
*.ingress.annotationsthe corresponding ones for cert-manager. - If using self-signed certificates created by Helm, set both
*.ingress.tlsand*.ingress.selfSignedtotrue.
Additional environment variables
In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property inside the web, streaming and sidekiq sections.
streaming:
extraEnvVars:
- name: LOG_LEVEL
value: error
Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values inside the web, streaming and sidekiq sections.
Sidecars
If additional containers are needed in the same pod as mastodon (such as additional metrics or logging exporters), they can be defined using the sidecars parameter inside the web, streaming and sidekiq sections.
sidecars:
- name: your-image-name
image: your-image
imagePullPolicy: Always
ports:
- name: portname
containerPort: 1234
If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:
service:
extraPorts:
- name: extraPort
port: 11311
targetPort: 11311
NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the
--enable-metrics=trueparameter at deployment time. Thesidecarsparameter should therefore only be used for any extra sidecar containers.
If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:
initContainers:
- name: your-image-name
image: your-image
imagePullPolicy: Always
ports:
- name: portname
containerPort: 1234
Learn more about sidecar containers and init containers.
Pod affinity
This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod affinity in the kubernetes documentation.
As an alternative, use one of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters inside the web, streaming and sidekiq sections.
Persistence
The Bitnami mastodon image stores the mastodon data and configurations at the /bitnami path of the container. Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube.
Parameters
Global parameters
| Name | Description | Value |
|---|---|---|
global.imageRegistry |
Global Docker image registry | "" |
global.imagePullSecrets |
Global Docker registry secret names as an array | [] |
global.defaultStorageClass |
Global default StorageClass for Persistent Volume(s) | "" |
global.storageClass |
DEPRECATED: use global.defaultStorageClass instead | "" |
global.compatibility.openshift.adaptSecurityContext |
Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation) | auto |
Common parameters
| Name | Description | Value |
|---|---|---|
kubeVersion |
Override Kubernetes version | "" |
nameOverride |
String to partially override common.names.name | "" |
fullnameOverride |
String to fully override common.names.fullname | "" |
namespaceOverride |
String to fully override common.names.namespace | "" |
commonLabels |
Labels to add to all deployed objects | {} |
commonAnnotations |
Annotations to add to all deployed objects | {} |
clusterDomain |
Kubernetes cluster domain name | cluster.local |
extraDeploy |
Array of extra objects to deploy with the release | [] |
diagnosticMode.enabled |
Enable diagnostic mode (all probes will be disabled and the command will be overridden) | false |
diagnosticMode.command |
Command to override all containers in the deployment | ["sleep"] |
diagnosticMode.args |
Args to override all containers in the deployment | ["infinity"] |
image.registry |
Mastodon image registry | REGISTRY_NAME |
image.repository |
Mastodon image repository | REPOSITORY_NAME/mastodon |
image.digest |
Mastodon image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag image tag (immutable tags are recommended) | "" |
image.pullPolicy |
Mastodon image pull policy | IfNotPresent |
image.pullSecrets |
Mastodon image pull secrets | [] |
image.debug |
Enable Mastodon image debug mode | false |
Mastodon common parameters
| Name | Description | Value |
|---|---|---|
environment |
Mastodon Rails and Node environment. Should be one of ‘production’, | production |
adminUser |
Mastodon admin username | "" |
adminEmail |
Mastodon admin email | "" |
adminPassword |
Mastodon admin password | "" |
otpSecret |
Mastodon one time password secret. Generate with rake secret. Changing it will break two-factor authentication. | "" |
secretKeyBase |
Mastodon secret key base. Generate with rake secret. Changing it will break all active browser sessions. | "" |
vapidPrivateKey |
Mastodon vapid private key. Generate with rake mastodon:webpush:generate_vapid_key. Changing it will break push notifications. | "" |
vapidPublicKey |
Mastodon vapid public key. Generate with rake mastodon:webpush:generate_vapid_key. Changing it will break push notifications. | "" |
extraConfig |
Extra configuration for Mastodon in the form of environment variables | {} |
extraSecretConfig |
Extra secret configuration for Mastodon in the form of environment variables | {} |
existingConfigmap |
The name of an existing ConfigMap with your default configuration for Mastodon | "" |
existingSecret |
The name of an existing Secret with your default configuration for Mastodon | "" |
extraConfigExistingConfigmap |
The name of an existing ConfigMap with your extra configuration for Mastodon | "" |
extraConfigExistingSecret |
The name of an existing Secret with your extra configuration for Mastodon | "" |
enableSearches |
Enable the search engine (uses Elasticsearch under the hood) | true |
enableS3 |
Enable the S3 storage engine | true |
forceHttpsS3Protocol |
Force Mastodon’s S3_PROTOCOL to be https (Useful when TLS is terminated using cert-manager/Ingress) | false |
useSecureWebSocket |
Set Mastodon’s STREAMING_API_BASE_URL to use secure websocket (wss:// instead of ws://) | false |
local_https |
Set this instance to advertise itself to the fediverse using HTTPS rather than HTTP URLs. This should almost always be true. | true |
localDomain |
The domain name used by accounts on this instance. Unless you’re using | "" |
webDomain |
Optional alternate domain used when you want to host Mastodon at a | "" |
defaultLocale |
Set the default locale for this instance | en |
s3AliasHost |
S3 alias host for Mastodon (will use ‘http://webDomain/bucket’ if not set) | "" |
smtp.server |
SMTP server | "" |
smtp.port |
SMTP port | 587 |
smtp.from_address |
From address for sent emails | "" |
smtp.domain |
SMTP domain | "" |
smtp.reply_to |
Reply-To value for sent emails | "" |
smtp.delivery_method |
SMTP delivery method | smtp |
smtp.ca_file |
SMTP CA file location | /etc/ssl/certs/ca-certificates.crt |
smtp.openssl_verify_mode |
OpenSSL verify mode | none |
smtp.enable_starttls_auto |
Automatically enable StartTLS | true |
smtp.tls |
SMTP TLS | false |
smtp.auth_method |
SMTP auth method (set to “none” to disable SMTP auth) | plain |
smtp.login |
SMTP auth username | "" |
smtp.password |
SMTP auth password | "" |
smtp.existingSecret |
Name of an existing secret resource containing the SMTP | "" |
smtp.existingSecretLoginKey |
Name of the key for the SMTP login credential | "" |
smtp.existingSecretPasswordKey |
Name of the key for the SMTP password credential | "" |
smtp.existingSecretServerKey |
Name of the key for the SMTP hostname | "" |
Mastodon Web Parameters
| Name | Description | Value |
|---|---|---|
web.replicaCount |
Number of Mastodon web replicas to deploy | 1 |
web.containerPorts.http |
Mastodon web HTTP container port | 3000 |
web.livenessProbe.enabled |
Enable livenessProbe on Mastodon web containers | true |
web.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
web.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
web.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
web.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
web.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
web.readinessProbe.enabled |
Enable readinessProbe on Mastodon web containers | true |
web.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
web.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
web.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
web.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
web.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
web.startupProbe.enabled |
Enable startupProbe on Mastodon web containers | false |
web.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
web.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
web.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
web.startupProbe.failureThreshold |
Failure threshold for startupProbe | 6 |
web.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
web.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
web.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
web.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
web.resourcesPreset |
Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if web.resources is set (web.resources is recommended for production). | small |
web.resources |
Set container requests and limits for different resources like CPU or memory (essential for production workloads) | {} |
web.podSecurityContext.enabled |
Enabled Mastodon web pods’ Security Context | true |
web.podSecurityContext.fsGroupChangePolicy |
Set filesystem group change policy | Always |
web.podSecurityContext.sysctls |
Set kernel settings using the sysctl interface | [] |
web.podSecurityContext.supplementalGroups |
Set filesystem extra groups | [] |
web.podSecurityContext.fsGroup |
Set Mastodon web pod’s Security Context fsGroup | 1001 |
web.containerSecurityContext.enabled |
Enabled containers’ Security Context | true |
web.containerSecurityContext.seLinuxOptions |
Set SELinux options in container | nil |
web.containerSecurityContext.runAsUser |
Set containers’ Security Context runAsUser | 1001 |
web.containerSecurityContext.runAsGroup |
Set containers’ Security Context runAsGroup | 1001 |
web.containerSecurityContext.runAsNonRoot |
Set container’s Security Context runAsNonRoot | true |
web.containerSecurityContext.privileged |
Set container’s Security Context privileged | false |
web.containerSecurityContext.readOnlyRootFilesystem |
Set container’s Security Context readOnlyRootFilesystem | true |
web.containerSecurityContext.allowPrivilegeEscalation |
Set container’s Security Context allowPrivilegeEscalation | false |
web.containerSecurityContext.capabilities.drop |
List of capabilities to be dropped | ["ALL"] |
web.containerSecurityContext.seccompProfile.type |
Set container’s Security Context seccomp profile | RuntimeDefault |
web.command |
Override default container command (useful when using custom images) | [] |
web.args |
Override default container args (useful when using custom images) | [] |
web.automountServiceAccountToken |
Mount Service Account token in pod | false |
web.hostAliases |
Mastodon web pods host aliases | [] |
web.podLabels |
Extra labels for Mastodon web pods | {} |
web.podAnnotations |
Annotations for Mastodon web pods | {} |
web.podAffinityPreset |
Pod affinity preset. Ignored if web.affinity is set. Allowed values: soft or hard |
"" |
web.podAntiAffinityPreset |
Pod anti-affinity preset. Ignored if web.affinity is set. Allowed values: soft or hard |
soft |
web.nodeAffinityPreset.type |
Node affinity preset type. Ignored if web.affinity is set. Allowed values: soft or hard |
"" |
web.nodeAffinityPreset.key |
Node label key to match. Ignored if web.affinity is set |
"" |
web.nodeAffinityPreset.values |
Node label values to match. Ignored if web.affinity is set |
[] |
web.affinity |
Affinity for Mastodon web pods assignment | {} |
web.nodeSelector |
Node labels for Mastodon web pods assignment | {} |
web.tolerations |
Tolerations for Mastodon web pods assignment | [] |
web.updateStrategy.type |
Mastodon web statefulset strategy type | RollingUpdate |
web.priorityClassName |
Mastodon web pods’ priorityClassName | "" |
web.topologySpreadConstraints |
Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template | [] |
web.schedulerName |
Name of the k8s scheduler (other than default) for Mastodon web pods | "" |
web.terminationGracePeriodSeconds |
Seconds Redmine pod needs to terminate gracefully | "" |
web.lifecycleHooks |
for the Mastodon web container(s) to automate configuration before or after startup | {} |
web.extraEnvVars |
Array with extra environment variables to add to Mastodon web nodes | [] |
web.extraEnvVarsCM |
Name of existing ConfigMap containing extra env vars for Mastodon web nodes | "" |
web.extraEnvVarsSecret |
Name of existing Secret containing extra env vars for Mastodon web nodes | "" |
web.extraVolumes |
Optionally specify extra list of additional volumes for the Mastodon web pod(s) | [] |
web.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the Mastodon web container(s) | [] |
web.sidecars |
Add additional sidecar containers to the Mastodon web pod(s) | [] |
web.initContainers |
Add additional init containers to the Mastodon web pod(s) | [] |
web.pdb.create |
Enable/disable a Pod Disruption Budget creation | true |
web.pdb.minAvailable |
Minimum number/percentage of pods that should remain scheduled | "" |
web.pdb.maxUnavailable |
Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both web.pdb.minAvailable and web.pdb.maxUnavailable are empty. |
"" |
Mastodon Web Traffic Exposure Parameters
| Name | Description | Value |
|---|---|---|
web.service.type |
Mastodon web service type | ClusterIP |
web.service.ports.http |
Mastodon web service HTTP port | 80 |
web.service.nodePorts.http |
Node port for HTTP | "" |
web.service.clusterIP |
Mastodon web service Cluster IP | "" |
web.service.loadBalancerIP |
Mastodon web service Load Balancer IP | "" |
web.service.loadBalancerSourceRanges |
Mastodon web service Load Balancer sources | [] |
web.service.externalTrafficPolicy |
Mastodon web service external traffic policy | Cluster |
web.service.annotations |
Additional custom annotations for Mastodon web service | {} |
web.service.extraPorts |
Extra ports to expose in Mastodon web service (normally used with the sidecars value) |
[] |
web.service.sessionAffinity |
Control where web requests go, to the same pod or round-robin | None |
web.service.sessionAffinityConfig |
Additional settings for the sessionAffinity | {} |
web.networkPolicy.enabled |
Enable creation of NetworkPolicy resources | true |
web.networkPolicy.allowExternal |
The Policy model to apply | true |
web.networkPolicy.allowExternalEgress |
Allow the pod to access any range of port and all destinations. | true |
web.networkPolicy.extraIngress |
Add extra ingress rules to the NetworkPolicy | [] |
web.networkPolicy.extraEgress |
Add extra ingress rules to the NetworkPolicy | [] |
web.networkPolicy.ingressNSMatchLabels |
Labels to match to allow traffic from other namespaces | {} |
web.networkPolicy.ingressNSPodMatchLabels |
Pod labels to match to allow traffic from other namespaces | {} |
Mastodon Sidekiq Parameters
| Name | Description | Value |
|---|---|---|
sidekiq.replicaCount |
Number of Mastodon sidekiq replicas to deploy | 1 |
sidekiq.livenessProbe.enabled |
Enable livenessProbe on Mastodon sidekiq containers | true |
sidekiq.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
sidekiq.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
sidekiq.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
sidekiq.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
sidekiq.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
sidekiq.readinessProbe.enabled |
Enable readinessProbe on Mastodon sidekiq containers | true |
sidekiq.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
sidekiq.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
sidekiq.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
sidekiq.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
sidekiq.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
sidekiq.startupProbe.enabled |
Enable startupProbe on Mastodon sidekiq containers | false |
sidekiq.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
sidekiq.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
sidekiq.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
sidekiq.startupProbe.failureThreshold |
Failure threshold for startupProbe | 6 |
sidekiq.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
sidekiq.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
sidekiq.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
sidekiq.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
sidekiq.resourcesPreset |
Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if sidekiq.resources is set (sidekiq.resources is recommended for production). | small |
sidekiq.resources |
Set container requests and limits for different resources like CPU or memory (essential for production workloads) | {} |
sidekiq.podSecurityContext.enabled |
Enabled Mastodon sidekiq pods’ Security Context | true |
sidekiq.podSecurityContext.fsGroupChangePolicy |
Set filesystem group change policy | Always |
sidekiq.podSecurityContext.sysctls |
Set kernel settings using the sysctl interface | [] |
sidekiq.podSecurityContext.supplementalGroups |
Set filesystem extra groups | [] |
sidekiq.podSecurityContext.fsGroup |
Set Mastodon sidekiq pod’s Security Context fsGroup | 1001 |
sidekiq.containerSecurityContext.enabled |
Enabled containers’ Security Context | true |
sidekiq.containerSecurityContext.seLinuxOptions |
Set SELinux options in container | nil |
sidekiq.containerSecurityContext.runAsUser |
Set containers’ Security Context runAsUser | 1001 |
sidekiq.containerSecurityContext.runAsGroup |
Set containers’ Security Context runAsGroup | 1001 |
sidekiq.containerSecurityContext.runAsNonRoot |
Set container’s Security Context runAsNonRoot | true |
sidekiq.containerSecurityContext.privileged |
Set container’s Security Context privileged | false |
sidekiq.containerSecurityContext.readOnlyRootFilesystem |
Set container’s Security Context readOnlyRootFilesystem | true |
sidekiq.containerSecurityContext.allowPrivilegeEscalation |
Set container’s Security Context allowPrivilegeEscalation | false |
sidekiq.containerSecurityContext.capabilities.drop |
List of capabilities to be dropped | ["ALL"] |
sidekiq.containerSecurityContext.seccompProfile.type |
Set container’s Security Context seccomp profile | RuntimeDefault |
sidekiq.command |
Override default container command (useful when using custom images) | [] |
sidekiq.args |
Override default container args (useful when using custom images) | [] |
sidekiq.automountServiceAccountToken |
Mount Service Account token in pod | false |
sidekiq.hostAliases |
Mastodon sidekiq pods host aliases | [] |
sidekiq.podLabels |
Extra labels for Mastodon sidekiq pods | {} |
sidekiq.podAnnotations |
Annotations for Mastodon sidekiq pods | {} |
sidekiq.podAffinityPreset |
Pod affinity preset. Ignored if sidekiq.affinity is set. Allowed values: soft or hard |
"" |
sidekiq.podAntiAffinityPreset |
Pod anti-affinity preset. Ignored if sidekiq.affinity is set. Allowed values: soft or hard |
soft |
sidekiq.nodeAffinityPreset.type |
Node affinity preset type. Ignored if sidekiq.affinity is set. Allowed values: soft or hard |
"" |
sidekiq.nodeAffinityPreset.key |
Node label key to match. Ignored if sidekiq.affinity is set |
"" |
sidekiq.nodeAffinityPreset.values |
Node label values to match. Ignored if sidekiq.affinity is set |
[] |
sidekiq.affinity |
Affinity for Mastodon sidekiq pods assignment | {} |
sidekiq.nodeSelector |
Node labels for Mastodon sidekiq pods assignment | {} |
sidekiq.tolerations |
Tolerations for Mastodon sidekiq pods assignment | [] |
sidekiq.updateStrategy.type |
Mastodon sidekiq statefulset strategy type | RollingUpdate |
sidekiq.priorityClassName |
Mastodon sidekiq pods’ priorityClassName | "" |
sidekiq.topologySpreadConstraints |
Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template | [] |
sidekiq.schedulerName |
Name of the k8s scheduler (other than default) for Mastodon sidekiq pods | "" |
sidekiq.terminationGracePeriodSeconds |
Seconds Redmine pod needs to terminate gracefully | "" |
sidekiq.lifecycleHooks |
for the Mastodon sidekiq container(s) to automate configuration before or after startup | {} |
sidekiq.extraEnvVars |
Array with extra environment variables to add to Mastodon sidekiq nodes | [] |
sidekiq.extraEnvVarsCM |
Name of existing ConfigMap containing extra env vars for Mastodon sidekiq nodes | "" |
sidekiq.extraEnvVarsSecret |
Name of existing Secret containing extra env vars for Mastodon sidekiq nodes | "" |
sidekiq.extraVolumes |
Optionally specify extra list of additional volumes for the Mastodon sidekiq pod(s) | [] |
sidekiq.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the Mastodon sidekiq container(s) | [] |
sidekiq.sidecars |
Add additional sidecar containers to the Mastodon sidekiq pod(s) | [] |
sidekiq.initContainers |
Add additional init containers to the Mastodon sidekiq pod(s) | [] |
sidekiq.pdb.create |
Enable/disable a Pod Disruption Budget creation | true |
sidekiq.pdb.minAvailable |
Minimum number/percentage of pods that should remain scheduled | "" |
sidekiq.pdb.maxUnavailable |
Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both sidekiq.pdb.minAvailable and sidekiq.pdb.maxUnavailable are empty. |
"" |
sidekiq.networkPolicy.enabled |
Enable creation of NetworkPolicy resources | true |
sidekiq.networkPolicy.allowExternal |
The Policy model to apply | true |
sidekiq.networkPolicy.allowExternalEgress |
Allow the pod to access any range of port and all destinations. | true |
sidekiq.networkPolicy.extraIngress |
Add extra ingress rules to the NetworkPolicy | [] |
sidekiq.networkPolicy.extraEgress |
Add extra ingress rules to the NetworkPolicy | [] |
sidekiq.networkPolicy.ingressNSMatchLabels |
Labels to match to allow traffic from other namespaces | {} |
sidekiq.networkPolicy.ingressNSPodMatchLabels |
Pod labels to match to allow traffic from other namespaces | {} |
Mastodon Streaming Parameters
| Name | Description | Value |
|---|---|---|
streaming.replicaCount |
Number of Mastodon streaming replicas to deploy | 1 |
streaming.containerPorts.http |
Mastodon streaming HTTP container port | 8080 |
streaming.livenessProbe.enabled |
Enable livenessProbe on Mastodon streaming containers | true |
streaming.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
streaming.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
streaming.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
streaming.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
streaming.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
streaming.readinessProbe.enabled |
Enable readinessProbe on Mastodon streaming containers | true |
streaming.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
streaming.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
streaming.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
streaming.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
streaming.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
streaming.startupProbe.enabled |
Enable startupProbe on Mastodon streaming containers | false |
streaming.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
streaming.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
streaming.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
streaming.startupProbe.failureThreshold |
Failure threshold for startupProbe | 6 |
streaming.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
streaming.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
streaming.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
streaming.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
streaming.resourcesPreset |
Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if streaming.resources is set (streaming.resources is recommended for production). | small |
streaming.resources |
Set container requests and limits for different resources like CPU or memory (essential for production workloads) | {} |
streaming.podSecurityContext.enabled |
Enabled Mastodon streaming pods’ Security Context | true |
streaming.podSecurityContext.fsGroupChangePolicy |
Set filesystem group change policy | Always |
streaming.podSecurityContext.sysctls |
Set kernel settings using the sysctl interface | [] |
streaming.podSecurityContext.supplementalGroups |
Set filesystem extra groups | [] |
streaming.podSecurityContext.fsGroup |
Set Mastodon streaming pod’s Security Context fsGroup | 1001 |
streaming.containerSecurityContext.enabled |
Enabled containers’ Security Context | true |
streaming.containerSecurityContext.seLinuxOptions |
Set SELinux options in container | nil |
streaming.containerSecurityContext.runAsUser |
Set containers’ Security Context runAsUser | 1001 |
streaming.containerSecurityContext.runAsGroup |
Set containers’ Security Context runAsGroup | 1001 |
streaming.containerSecurityContext.runAsNonRoot |
Set container’s Security Context runAsNonRoot | true |
streaming.containerSecurityContext.privileged |
Set container’s Security Context privileged | false |
streaming.containerSecurityContext.readOnlyRootFilesystem |
Set container’s Security Context readOnlyRootFilesystem | true |
streaming.containerSecurityContext.allowPrivilegeEscalation |
Set container’s Security Context allowPrivilegeEscalation | false |
streaming.containerSecurityContext.capabilities.drop |
List of capabilities to be dropped | ["ALL"] |
streaming.containerSecurityContext.seccompProfile.type |
Set container’s Security Context seccomp profile | RuntimeDefault |
streaming.command |
Override default container command (useful when using custom images) | [] |
streaming.args |
Override default container args (useful when using custom images) | [] |
streaming.automountServiceAccountToken |
Mount Service Account token in pod | false |
streaming.hostAliases |
Mastodon streaming pods host aliases | [] |
streaming.podLabels |
Extra labels for Mastodon streaming pods | {} |
streaming.podAnnotations |
Annotations for Mastodon streaming pods | {} |
streaming.podAffinityPreset |
Pod affinity preset. Ignored if streaming.affinity is set. Allowed values: soft or hard |
"" |
streaming.podAntiAffinityPreset |
Pod anti-affinity preset. Ignored if streaming.affinity is set. Allowed values: soft or hard |
soft |
streaming.nodeAffinityPreset.type |
Node affinity preset type. Ignored if streaming.affinity is set. Allowed values: soft or hard |
"" |
streaming.nodeAffinityPreset.key |
Node label key to match. Ignored if streaming.affinity is set |
"" |
streaming.nodeAffinityPreset.values |
Node label values to match. Ignored if streaming.affinity is set |
[] |
streaming.affinity |
Affinity for Mastodon streaming pods assignment | {} |
streaming.nodeSelector |
Node labels for Mastodon streaming pods assignment | {} |
streaming.tolerations |
Tolerations for Mastodon streaming pods assignment | [] |
streaming.updateStrategy.type |
Mastodon streaming statefulset strategy type | RollingUpdate |
streaming.priorityClassName |
Mastodon streaming pods’ priorityClassName | "" |
streaming.topologySpreadConstraints |
Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template | [] |
streaming.schedulerName |
Name of the k8s scheduler (other than default) for Mastodon streaming pods | "" |
streaming.terminationGracePeriodSeconds |
Seconds Redmine pod needs to terminate gracefully | "" |
streaming.lifecycleHooks |
for the Mastodon streaming container(s) to automate configuration before or after startup | {} |
streaming.extraEnvVars |
Array with extra environment variables to add to Mastodon streaming nodes | [] |
streaming.extraEnvVarsCM |
Name of existing ConfigMap containing extra env vars for Mastodon streaming nodes | "" |
streaming.extraEnvVarsSecret |
Name of existing Secret containing extra env vars for Mastodon streaming nodes | "" |
streaming.extraVolumes |
Optionally specify extra list of additional volumes for the Mastodon streaming pod(s) | [] |
streaming.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the Mastodon streaming container(s) | [] |
streaming.sidecars |
Add additional sidecar containers to the Mastodon streaming pod(s) | [] |
streaming.initContainers |
Add additional init containers to the Mastodon streaming pod(s) | [] |
streaming.pdb.create |
Enable/disable a Pod Disruption Budget creation | true |
streaming.pdb.minAvailable |
Minimum number/percentage of pods that should remain scheduled | "" |
streaming.pdb.maxUnavailable |
Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both streaming.pdb.minAvailable and streaming.pdb.maxUnavailable are empty. |
"" |
Mastodon Streaming Traffic Exposure Parameters
| Name | Description | Value |
|---|---|---|
streaming.service.type |
Mastodon streaming service type | ClusterIP |
streaming.service.ports.http |
Mastodon streaming service HTTP port | 80 |
streaming.service.nodePorts.http |
Node port for HTTP | "" |
streaming.service.clusterIP |
Mastodon streaming service Cluster IP | "" |
streaming.service.loadBalancerIP |
Mastodon streaming service Load Balancer IP | "" |
streaming.service.loadBalancerSourceRanges |
Mastodon streaming service Load Balancer sources | [] |
streaming.service.externalTrafficPolicy |
Mastodon streaming service external traffic policy | Cluster |
streaming.service.annotations |
Additional custom annotations for Mastodon streaming service | {} |
streaming.service.extraPorts |
Extra ports to expose in Mastodon streaming service (normally used with the sidecars value) |
[] |
streaming.service.sessionAffinity |
Control where streaming requests go, to the same pod or round-robin | None |
streaming.service.sessionAffinityConfig |
Additional settings for the sessionAffinity | {} |
streaming.networkPolicy.enabled |
Enable creation of NetworkPolicy resources | true |
streaming.networkPolicy.allowExternal |
The Policy model to apply | true |
streaming.networkPolicy.allowExternalEgress |
Allow the pod to access any range of port and all destinations. | true |
streaming.networkPolicy.extraIngress |
Add extra ingress rules to the NetworkPolicy | [] |
streaming.networkPolicy.extraEgress |
Add extra ingress rules to the NetworkPolicy | [] |
streaming.networkPolicy.ingressNSMatchLabels |
Labels to match to allow traffic from other namespaces | {} |
streaming.networkPolicy.ingressNSPodMatchLabels |
Pod labels to match to allow traffic from other namespaces | {} |
Mastodon Media Management Cronjob Parameters
| Name | Description | Value |
|---|---|---|
tootctlMediaManagement.enabled |
Enable Cronjob to manage all media caches | false |
tootctlMediaManagement.removeAttachments |
Enable removing attachements | true |
tootctlMediaManagement.removeAttachmentsDays |
Number of days old media attachments must be for removal | 30 |
tootctlMediaManagement.removeCustomEmoji |
Enable removal of cached remote emoji files | false |
tootctlMediaManagement.removePreviewCards |
Enable removal of cached preview cards | false |
tootctlMediaManagement.removePreviewCardsDays |
Number of days old preview cards must be for removal | 30 |
tootctlMediaManagement.removeAvatars |
Enable removal of cached remote avatar images | false |
tootctlMediaManagement.removeAvatarsDays |
Number of days old avatar images must be for removal | 30 |
tootctlMediaManagement.removeHeaders |
Enable removal of cached profile header images | false |
tootctlMediaManagement.removeHeadersDays |
Number of days old header images must be for removal | 30 |
tootctlMediaManagement.removeOrphans |
Enable removal of cached orphan files | false |
tootctlMediaManagement.includeFollows |
Enable removal of cached avatar and header when local users are following the accounts | false |
tootctlMediaManagement.cronSchedule |
Cron job schedule to run tootctl media commands | 14 3 * * * |
tootctlMediaManagement.failedJobsHistoryLimit |
Number of failed jobs to keep | 3 |
tootctlMediaManagement.successfulJobsHistoryLimit |
Number of successful jobs to keep | 3 |
tootctlMediaManagement.concurrencyPolicy |
Concurrency Policy. Should be Allow, Forbid or Replace | Allow |
tootctlMediaManagement.networkPolicy.enabled |
Enable creation of NetworkPolicy resources | true |
tootctlMediaManagement.networkPolicy.allowExternal |
The Policy model to apply | true |
tootctlMediaManagement.networkPolicy.allowExternalEgress |
Allow the pod to access any range of port and all destinations. | true |
tootctlMediaManagement.networkPolicy.extraIngress |
Add extra ingress rules to the NetworkPolicy | [] |
tootctlMediaManagement.networkPolicy.extraEgress |
Add extra ingress rules to the NetworkPolicy | [] |
tootctlMediaManagement.networkPolicy.ingressNSMatchLabels |
Labels to match to allow traffic from other namespaces | {} |
tootctlMediaManagement.networkPolicy.ingressNSPodMatchLabels |
Pod labels to match to allow traffic from other namespaces | {} |
Mastodon Migration job Parameters
| Name | Description | Value |
|---|---|---|
initJob.precompileAssets |
Execute rake assets:precompile as part of the job | true |
initJob.migrateDB |
Execute rake db:migrate as part of the job | true |
initJob.migrateElasticsearch |
Execute rake chewy:upgrade as part of the job | true |
initJob.createAdmin |
Create admin user as part of the job | true |
initJob.backoffLimit |
set backoff limit of the job | 10 |
initJob.extraVolumes |
Optionally specify extra list of additional volumes for the Mastodon init job | [] |
initJob.containerSecurityContext.enabled |
Enabled containers’ Security Context | true |
initJob.containerSecurityContext.seLinuxOptions |
Set SELinux options in container | nil |
initJob.containerSecurityContext.runAsUser |
Set containers’ Security Context runAsUser | 1001 |
initJob.containerSecurityContext.runAsGroup |
Set containers’ Security Context runAsGroup | 1001 |
initJob.containerSecurityContext.runAsNonRoot |
Set container’s Security Context runAsNonRoot | true |
initJob.containerSecurityContext.privileged |
Set container’s Security Context privileged | false |
initJob.containerSecurityContext.readOnlyRootFilesystem |
Set container’s Security Context readOnlyRootFilesystem | true |
initJob.containerSecurityContext.allowPrivilegeEscalation |
Set container’s Security Context allowPrivilegeEscalation | false |
initJob.containerSecurityContext.capabilities.drop |
List of capabilities to be dropped | ["ALL"] |
initJob.containerSecurityContext.seccompProfile.type |
Set container’s Security Context seccomp profile | RuntimeDefault |
initJob.podSecurityContext.enabled |
Enabled Mastodon init job pods’ Security Context | true |
initJob.podSecurityContext.fsGroupChangePolicy |
Set filesystem group change policy | Always |
initJob.podSecurityContext.sysctls |
Set kernel settings using the sysctl interface | [] |
initJob.podSecurityContext.supplementalGroups |
Set filesystem extra groups | [] |
initJob.podSecurityContext.fsGroup |
Set Mastodon init job pod’s Security Context fsGroup | 1001 |
initJob.extraEnvVars |
Array containing extra env vars to configure the Mastodon init job | [] |
initJob.extraEnvVarsCM |
ConfigMap containing extra env vars to configure the Mastodon init job | "" |
initJob.extraEnvVarsSecret |
Secret containing extra env vars to configure the Mastodon init job (in case of sensitive data) | "" |
initJob.extraVolumeMounts |
Array of extra volume mounts to be added to the Mastodon Container (evaluated as template). Normally used with extraVolumes. |
[] |
initJob.resourcesPreset |
Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if initJob.resources is set (initJob.resources is recommended for production). | small |
initJob.resources |
Set container requests and limits for different resources like CPU or memory (essential for production workloads) | {} |
initJob.automountServiceAccountToken |
Mount Service Account token in pod | false |
initJob.hostAliases |
Add deployment host aliases | [] |
initJob.annotations |
Add annotations to the job | {} |
initJob.podLabels |
Additional pod labels | {} |
initJob.podAnnotations |
Additional pod annotations | {} |
initJob.networkPolicy.enabled |
Enable creation of NetworkPolicy resources | true |
initJob.networkPolicy.allowExternal |
The Policy model to apply | true |
initJob.networkPolicy.allowExternalEgress |
Allow the pod to access any range of port and all destinations. | true |
initJob.networkPolicy.extraIngress |
Add extra ingress rules to the NetworkPolicy | [] |
initJob.networkPolicy.extraEgress |
Add extra ingress rules to the NetworkPolicy | [] |
initJob.networkPolicy.ingressNSMatchLabels |
Labels to match to allow traffic from other namespaces | {} |
initJob.networkPolicy.ingressNSPodMatchLabels |
Pod labels to match to allow traffic from other namespaces | {} |
Persistence Parameters (only when S3 is disabled)
| Name | Description | Value |
|---|---|---|
persistence.enabled |
Enable persistence using Persistent Volume Claims | false |
persistence.mountPath |
Path to mount the volume at. | /bitnami/mastodon |
persistence.subPath |
The subdirectory of the volume to mount to, useful in dev environments and one PV for multiple services | "" |
persistence.storageClass |
Storage class of backing PVC | "" |
persistence.annotations |
Persistent Volume Claim annotations | {} |
persistence.accessModes |
Persistent Volume Access Modes | ["ReadWriteOnce"] |
persistence.size |
Size of data volume | 8Gi |
persistence.existingClaim |
The name of an existing PVC to use for persistence | "" |
persistence.selector |
Selector to match an existing Persistent Volume for Mastodon data PVC | {} |
persistence.dataSource |
Custom PVC data source | {} |
Init Container Parameters
| Name | Description | Value |
|---|---|---|
volumePermissions.enabled |
Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup |
false |
volumePermissions.image.registry |
OS Shell + Utility image registry | REGISTRY_NAME |
volumePermissions.image.repository |
OS Shell + Utility image repository | REPOSITORY_NAME/os-shell |
volumePermissions.image.pullPolicy |
OS Shell + Utility image pull policy | IfNotPresent |
volumePermissions.image.pullSecrets |
OS Shell + Utility image pull secrets | [] |
volumePermissions.resourcesPreset |
Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production). | nano |
volumePermissions.resources |
Set container requests and limits for different resources like CPU or memory (essential for production workloads) | {} |
volumePermissions.containerSecurityContext.seLinuxOptions |
Set SELinux options in container | nil |
volumePermissions.containerSecurityContext.runAsUser |
Set init container’s Security Context runAsUser | 0 |
Other Parameters
| Name | Description | Value |
|---|---|---|
serviceAccount.create |
Specifies whether a ServiceAccount should be created | true |
serviceAccount.name |
The name of the ServiceAccount to use. | "" |
serviceAccount.annotations |
Additional Service Account annotations (evaluated as a template) | {} |
serviceAccount.automountServiceAccountToken |
Automount service account token for the server service account | false |
externalDatabase.host |
Database host | "" |
externalDatabase.port |
Database port number | 5432 |
externalDatabase.user |
Non-root username for Mastodon | postgres |
externalDatabase.password |
Password for the non-root username for Mastodon | "" |
externalDatabase.database |
Mastodon database name | mastodon |
externalDatabase.existingSecret |
Name of an existing secret resource containing the database credentials | "" |
externalDatabase.existingSecretPasswordKey |
Name of an existing secret key containing the database credentials | db-password |
External Redis parameters
| Name | Description | Value |
|---|---|---|
externalRedis.host |
Redis host | "" |
externalRedis.port |
Redis port number | 6379 |
externalRedis.password |
Password for the Redis | "" |
externalRedis.existingSecret |
Name of an existing secret resource containing the Redis credentials | "" |
externalRedis.existingSecretPasswordKey |
Name of an existing secret key containing the Redis credentials | "" |
External S3 parameters
| Name | Description | Value |
|---|---|---|
externalS3.host |
External S3 host | "" |
externalS3.port |
External S3 port number | 443 |
externalS3.accessKeyID |
External S3 access key ID | "" |
externalS3.accessKeySecret |
External S3 access key secret | "" |
externalS3.existingSecret |
Name of an existing secret resource containing the S3 credentials | "" |
externalS3.existingSecretAccessKeyIDKey |
Name of an existing secret key containing the S3 access key ID | root-user |
externalS3.existingSecretKeySecretKey |
Name of an existing secret key containing the S3 access key secret | root-password |
externalS3.protocol |
External S3 protocol | https |
externalS3.bucket |
External S3 bucket | mastodon |
externalS3.region |
External S3 region | us-east-1 |
External elasticsearch configuration
| Name | Description | Value |
|---|---|---|
externalElasticsearch.host |
Host of the external elasticsearch server | "" |
externalElasticsearch.port |
Port of the external elasticsearch server | "" |
externalElasticsearch.password |
Password for the external elasticsearch server | "" |
externalElasticsearch.existingSecret |
Name of an existing secret resource containing the elasticsearch credentials | "" |
externalElasticsearch.existingSecretPasswordKey |
Name of an existing secret key containing the elasticsearch credentials | elasticsearch-password |
Redis sub-chart parameters
| Name | Description | Value |
|---|---|---|
redis.enabled |
Deploy Redis subchart | true |
redis.architecture |
Set Redis architecture | standalone |
redis.existingSecret |
Name of a secret containing redis credentials | "" |
redis.master.service.ports.redis |
Redis port | 6379 |
redis.auth.enabled |
Enable Redis auth | true |
redis.auth.password |
Redis password | "" |
redis.auth.existingSecret |
Name of a secret containing the Redis password | "" |
PostgreSQL chart configuration
| Name | Description | Value |
|---|---|---|
postgresql.enabled |
Switch to enable or disable the PostgreSQL helm chart | true |
postgresql.auth.username |
Name for a custom user to create | bn_mastodon |
postgresql.auth.password |
Password for the custom user to create | "" |
postgresql.auth.database |
Name for a custom database to create | bitnami_mastodon |
postgresql.auth.existingSecret |
Name of existing secret to use for PostgreSQL credentials | "" |
postgresql.architecture |
PostgreSQL architecture (standalone or replication) |
standalone |
postgresql.primary.service.ports.postgresql |
PostgreSQL service port | 5432 |
MinIO® chart parameters
| Name | Description | Value |
|---|---|---|
minio |
For full list of MinIO® values configurations please refer here | |
minio.enabled |
Enable/disable MinIO® chart installation | true |
minio.auth.rootUser |
MinIO® root username | admin |
minio.auth.rootPassword |
Password for MinIO® root user | "" |
minio.auth.existingSecret |
Name of an existing secret containing the MinIO® credentials | "" |
minio.defaultBuckets |
Comma, semi-colon or space separated list of MinIO® buckets to create | s3storage |
minio.provisioning.enabled |
Enable/disable MinIO® provisioning job | true |
minio.provisioning.extraCommands |
Extra commands to run on MinIO® provisioning job | ["mc anonymous set download provisioning/s3storage"] |
minio.tls.enabled |
Enable/disable MinIO® TLS support | false |
minio.service.type |
MinIO® service type | ClusterIP |
minio.service.loadBalancerIP |
MinIO® service LoadBalancer IP | "" |
minio.service.ports.api |
MinIO® service port | 80 |
Elasticsearch chart configuration
| Name | Description | Value |
|---|---|---|
elasticsearch.enabled |
Whether to deploy a elasticsearch server to use as Mastodon’s search engine | true |
elasticsearch.sysctlImage.enabled |
Enable kernel settings modifier image for Elasticsearch | true |
elasticsearch.security.enabled |
Enable security settings for Elasticsearch | false |
elasticsearch.security.existingSecret |
Name of an existing secret containing the elasticsearch credentials | "" |
elasticsearch.security.tls.restEncryption |
Enable TLS encryption for REST API | false |
elasticsearch.master.replicaCount |
Desired number of Elasticsearch master-eligible nodes | 1 |
elasticsearch.coordinating.replicaCount |
Desired number of Elasticsearch coordinating-only nodes | 1 |
elasticsearch.data.replicaCount |
Desired number of Elasticsearch data nodes | 1 |
elasticsearch.ingest.replicaCount |
Desired number of Elasticsearch ingest nodes | 1 |
elasticsearch.service.ports.restAPI |
Elasticsearch REST API port | 9200 |
Apache chart configuration
| Name | Description | Value |
|---|---|---|
apache.enabled |
Enable Apache chart | true |
apache.containerPorts.http |
Apache container port | 8080 |
apache.service.type |
Apache service type | LoadBalancer |
apache.service.loadBalancerIP |
Apache service LoadBalancer IP | "" |
apache.service.ports.http |
Apache service port | 80 |
apache.vhostsConfigMap |
Name of the ConfigMap containing the Apache vhost configuration | "" |
apache.readinessProbe.path |
Apache readiness probe path | /api/v1/streaming/health |
apache.startupProbe.path |
Apache startup probe path | /api/v1/streaming/health |
apache.ingress.enabled |
Enable ingress | false |
apache.ingress.hostname |
Ingress hostname | mastodon.local |
Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,
helm install my-release \
--set adminUsername=admin \
--set adminPassword=password \
oci://REGISTRY_NAME/REPOSITORY_NAME/mastodon
Note: You need to substitute the placeholders
REGISTRY_NAMEandREPOSITORY_NAMEwith a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to useREGISTRY_NAME=registry-1.docker.ioandREPOSITORY_NAME=bitnamicharts.
The above command sets the mastodon administrator account username and password to admin and password respectively.
NOTE: Once this chart is deployed, it is not possible to change the application’s access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application’s built-in administrative tools if available.
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/mastodon
Note: You need to substitute the placeholders
REGISTRY_NAMEandREPOSITORY_NAMEwith a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to useREGISTRY_NAME=registry-1.docker.ioandREPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml
Troubleshooting
Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.
Upgrading
To 7.0.0
This major updates the Redis® subchart to its newest major, 20.0.0. Here you can find more information about the changes introduced in that version.
To 6.0.0
This major updates the Elasticsearch subchart to its newest major, 21.0.0, which removes support for elasticsearch-curator. Check Elasticsearch Upgrading Notes for more information.
To 5.0.0
This major bump changes the following security defaults:
runAsGroupis changed from0to1001readOnlyRootFilesystemis set totrueresourcesPresetis changed fromnoneto the minimum size working in our test suites (NOTE:resourcesPresetis not meant for production usage, butresourcesadapted to your use case).global.compatibility.openshift.adaptSecurityContextis changed fromdisabledtoauto.
This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.
To 4.0.0
This major updates the Apache subchart to its newest major, 10.0.0. Here you can find more information about the changes introduced in that version.
To 3.0.0
This major updates the PostgreSQL subchart to its newest major, 13.0.0. Here you can find more information about the changes introduced in that version.
2.0.0
This major updates the Redis® subchart to its newest major, 18.0.0. This subchart’s major doesn’t include any changes affecting its use as a subchart for Mastodon, so no major issues are expected during the upgrade.
NOTE: Due to an error in our release process, Redis®’ chart versions higher or equal than 17.15.4 already use Redis® 7.2 by default.
1.0.0
This major updates the MinIO® subchart to its newest major, 12.0.0. This subchart’s major doesn’t include any changes affecting its use as a subchart for Mastodon, so no major issues are expected during the upgrade.
License
Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
