Bitnami package for Milvus

Milvus is a cloud-native, open-source vector database solution for AI applications and similarity search. Features high scalability, hibrid search and unified lambda structure.

Overview of Milvus

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/milvus

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.

This chart bootstraps a Milvus Deployment in a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/milvus

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys milvus on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Milvus configuration

The Milvus configuration file milvus.yaml is shared across the different components: rootCoord, dataCoord, indexCoord, dataNode and indexNode. This is set in the milvus.defaultConfig value. This configuration can be extended with extra settings using the milvus.extraConfig value. For specific component configuration edit the extraConfig section inside each of the previously mentioned components. Check the official Milvis documentation for the list of possible configurations.

Additional environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property inside each of the subsections: rootCoord, dataCoord, indexCoord, dataNode, indexNode, attu and queryNode.

dataCoord:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

rootCoord:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

indexCoord:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

dataNode:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

indexNode:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

queryNode:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Sidecars

If additional containers are needed in the same pod as milvus (such as additional metrics or logging exporters), they can be defined using the sidecars parameter inside each of the subsections: rootCoord, dataCoord, indexCoord, dataNode, indexNode, attu and queryNode .

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:

service:
  extraPorts:
  - name: extraPort
    port: 11311
    targetPort: 11311

NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the --enable-metrics=true parameter at deployment time. The sidecars parameter should therefore only be used for any extra sidecar containers.

If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Learn more about sidecar containers and init containers.

Pod affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod affinity in the kubernetes documentation.

As an alternative, use one of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters inside each of the subsections: rootCoord, dataCoord, indexCoord, dataNode, indexNode, attu and queryNode.

External kafka support

You may want to have Milvus connect to an external kafka rather than installing one inside your cluster. Typical reasons for this are to use a managed database service, or to share a common database server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalKafka parameter. You should also disable the etcd installation with the etcd.enabled option. Here is an example:

kafka:
  enabled: false
externalKafka:
  hosts:
    - externalhost

External etcd support

You may want to have Milvus connect to an external etcd rather than installing one inside your cluster. Typical reasons for this are to use a managed database service, or to share a common database server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalEtcd parameter. You should also disable the etcd installation with the etcd.enabled option. Here is an example:

etcd:
  enabled: false
externalEtcd:
  hosts:
    - externalhost

External S3 support

You may want to have Milvus connect to an external storage streaming rather than installing MiniIO(TM) inside your cluster. To achieve this, the chart allows you to specify credentials for an external storage streaming with the externalS3 parameter. You should also disable the MinIO(TM) installation with the minio.enabled option. Here is an example:

minio.enabled=false
externalS3.host=myexternalhost
externalS3.accessKeyID=accesskey
externalS3.accessKeySecret=secret

Ingress

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.To enable Ingress integration, set attu.ingress.enabled to true.

The most common scenario is to have one host name mapped to the deployment. In this case, the attu.ingress.hostname property can be used to set the host name. The attu.ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the attu.ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The attu.ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.

NOTE: For each host specified in the attu.ingress.extraHosts parameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers.

TLS secrets

This chart facilitates the creation of TLS secrets for use with the Ingress controller (although this is not mandatory). There are several common use cases:

• Generate certificate secrets based on chart parameters.
• Enable externally generated certificates.
• Manage application certificates via an external service (like cert-manager).
• Create self-signed certificates within the chart (if supported).

In the first two cases, a certificate and a key are needed. Files are expected in .pem format.

Here is an example of a certificate file:

NOTE: There may be more than one certificate if there is a certificate chain.

-----BEGIN CERTIFICATE-----
MIID6TCCAtGgAwIBAgIJAIaCwivkeB5EMA0GCSqGSIb3DQEBCwUAMFYxCzAJBgNV
...
jScrvkiBO65F46KioCL9h5tDvomdU1aqpI/CBzhvZn1c0ZTf87tGQR8NK7v7
-----END CERTIFICATE-----

Here is an example of a certificate key:

-----BEGIN RSA PRIVATE KEY-----
MIIEogIBAAKCAQEAvLYcyu8f3skuRyUgeeNpeDvYBCDcgq+LsWap6zbX5f8oLqp4
...
wrj2wDbCDCFmfqnSJ+dKI3vFLlEz44sAV8jX/kd4Y6ZTQhlLbYc=
-----END RSA PRIVATE KEY-----

• If using Helm to manage the certificates based on the parameters, copy these values into the certificate and key values for a given *.ingress.secrets entry.
• If managing TLS secrets separately, it is necessary to create a TLS secret with name INGRESS_HOSTNAME-tls (where INGRESS_HOSTNAME is a placeholder to be replaced with the hostname you set using the *.ingress.hostname parameter).
• If your cluster has a cert-manager add-on to automate the management and issuance of TLS certificates, add to *.ingress.annotations the corresponding ones for cert-manager.
• If using self-signed certificates created by Helm, set both *.ingress.tls and *.ingress.selfSigned to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.storageClass	Global StorageClass for Persistent Volume(s)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.fullname	""
fullnameOverride	String to fully override common.names.fullname	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
enableServiceLinks	Whether information about services should be injected into all pods’ environment variable	false
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployments/statefulsets	["sleep"]
diagnosticMode.args	Args to override all containers in the deployments/statefulsets	["infinity"]

Common Milvus Parameters

Name	Description	Value
milvus.image.registry	Milvus image registry	REGISTRY_NAME
milvus.image.repository	Milvus image repository	REPOSITORY_NAME/milvus
milvus.image.digest	Milvus image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
milvus.image.pullPolicy	Milvus image pull policy	IfNotPresent
milvus.image.pullSecrets	Milvus image pull secrets	[]
milvus.image.debug	Enable debug mode	false
milvus.auth.enabled	enable Milvus authentication	false
milvus.auth.username	Milvus username	user
milvus.auth.password	Milvus username password	""
milvus.auth.rootPassword	Milvus root password	""
milvus.auth.existingSecret	Name of a secret containing the Milvus password	""
milvus.auth.existingSecretPasswordKey	Name of the secret key containing the Milvus password	""
milvus.defaultConfig	Milvus components default configuration	""
milvus.extraConfig	Extra configuration parameters	{}
milvus.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
milvus.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
initJob.forceRun	Force the run of the credential job	false
initJob.image.registry	PyMilvus image registry	REGISTRY_NAME
initJob.image.repository	PyMilvus image repository	REPOSITORY_NAME/pymilvus
initJob.image.digest	PyMilvus image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
initJob.image.pullPolicy	PyMilvus image pull policy	IfNotPresent
initJob.image.pullSecrets	PyMilvus image pull secrets	[]
initJob.enableDefaultInitContainers	Deploy default init containers	true

TLS Client Configuration Parameters Connecting to Proxy

Name	Description	Value
initJob.tls.existingSecret	Name of the existing secret containing the TLS certificates for initJob.	""
initJob.tls.cert	The secret key from the existingSecret if ‘cert’ key different from the default (client.pem)	client.pem
initJob.tls.key	The secret key from the existingSecret if ‘key’ key different from the default (client.key)	client.key
initJob.tls.caCert	The secret key from the existingSecret if ‘caCert’ key different from the default (ca.pem)	ca.pem
initJob.tls.keyPassword	Password to access the password-protected PEM key if necessary.	""
initJob.backoffLimit	set backoff limit of the job	10
initJob.extraVolumes	Optionally specify extra list of additional volumes for the credential init job	[]
initJob.extraCommands	Extra commands to pass to the generation job	""
initJob.containerSecurityContext.enabled	Enabled containers’ Security Context	true
initJob.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
initJob.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
initJob.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
initJob.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
initJob.containerSecurityContext.privileged	Set container’s Security Context privileged	false
initJob.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
initJob.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
initJob.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
initJob.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
initJob.podSecurityContext.enabled	Enabled credential init job pods’ Security Context	true
initJob.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
initJob.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
initJob.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
initJob.podSecurityContext.fsGroup	Set credential init job pod’s Security Context fsGroup	1001
initJob.extraEnvVars	Array containing extra env vars to configure the credential init job	[]
initJob.extraEnvVarsCM	ConfigMap containing extra env vars to configure the credential init job	""
initJob.extraEnvVarsSecret	Secret containing extra env vars to configure the credential init job (in case of sensitive data)	""
initJob.extraVolumeMounts	Array of extra volume mounts to be added to the jwt Container (evaluated as template). Normally used with extraVolumes.	[]
initJob.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if initJob.resources is set (initJob.resources is recommended for production).	micro
initJob.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
initJob.livenessProbe.enabled	Enable livenessProbe on init job	true
initJob.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
initJob.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
initJob.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
initJob.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
initJob.livenessProbe.successThreshold	Success threshold for livenessProbe	1
initJob.readinessProbe.enabled	Enable readinessProbe on init job	true
initJob.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
initJob.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
initJob.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
initJob.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
initJob.readinessProbe.successThreshold	Success threshold for readinessProbe	1
initJob.startupProbe.enabled	Enable startupProbe on Data Coordinator containers	false
initJob.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
initJob.startupProbe.periodSeconds	Period seconds for startupProbe	10
initJob.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
initJob.startupProbe.failureThreshold	Failure threshold for startupProbe	5
initJob.startupProbe.successThreshold	Success threshold for startupProbe	1
initJob.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
initJob.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
initJob.customStartupProbe	Custom startupProbe that overrides the default one	{}
initJob.automountServiceAccountToken	Mount Service Account token in pod	false
initJob.hostAliases	Add deployment host aliases	[]
initJob.annotations	Add annotations to the job	{}
initJob.podLabels	Additional pod labels	{}
initJob.podAnnotations	Additional pod annotations	{}
initJob.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
initJob.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
initJob.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
initJob.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
initJob.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
initJob.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Data Coordinator Deployment Parameters

Name	Description	Value
dataCoord.enabled	Enable Data Coordinator deployment	true
dataCoord.extraEnvVars	Array with extra environment variables to add to data coordinator nodes	[]
dataCoord.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data coordinator nodes	""
dataCoord.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data coordinator nodes	""
dataCoord.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
dataCoord.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
dataCoord.extraConfig	Override configuration	{}
dataCoord.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
dataCoord.command	Override default container command (useful when using custom images)	[]
dataCoord.args	Override default container args (useful when using custom images)	[]
dataCoord.replicaCount	Number of Data Coordinator replicas to deploy	1
dataCoord.containerPorts.grpc	GRPC port for Data Coordinator	19530
dataCoord.containerPorts.metrics	Metrics port for Data Coordinator	9091
dataCoord.livenessProbe.enabled	Enable livenessProbe on Data Coordinator nodes	true
dataCoord.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
dataCoord.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
dataCoord.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
dataCoord.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
dataCoord.livenessProbe.successThreshold	Success threshold for livenessProbe	1
dataCoord.readinessProbe.enabled	Enable readinessProbe on Data Coordinator nodes	true
dataCoord.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
dataCoord.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
dataCoord.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
dataCoord.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
dataCoord.readinessProbe.successThreshold	Success threshold for readinessProbe	1
dataCoord.startupProbe.enabled	Enable startupProbe on Data Coordinator containers	false
dataCoord.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
dataCoord.startupProbe.periodSeconds	Period seconds for startupProbe	10
dataCoord.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
dataCoord.startupProbe.failureThreshold	Failure threshold for startupProbe	5
dataCoord.startupProbe.successThreshold	Success threshold for startupProbe	1
dataCoord.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
dataCoord.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
dataCoord.customStartupProbe	Custom startupProbe that overrides the default one	{}
dataCoord.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if dataCoord.resources is set (dataCoord.resources is recommended for production).	micro
dataCoord.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
dataCoord.podSecurityContext.enabled	Enabled Data Coordinator pods’ Security Context	true
dataCoord.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
dataCoord.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
dataCoord.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
dataCoord.podSecurityContext.fsGroup	Set Data Coordinator pod’s Security Context fsGroup	1001
dataCoord.containerSecurityContext.enabled	Enabled containers’ Security Context	true
dataCoord.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
dataCoord.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
dataCoord.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
dataCoord.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
dataCoord.containerSecurityContext.privileged	Set container’s Security Context privileged	false
dataCoord.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
dataCoord.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
dataCoord.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
dataCoord.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
dataCoord.lifecycleHooks	for the data coordinator container(s) to automate configuration before or after startup	{}
dataCoord.runtimeClassName	Name of the runtime class to be used by pod(s)	""
dataCoord.automountServiceAccountToken	Mount Service Account token in pod	false
dataCoord.hostAliases	data coordinator pods host aliases	[]
dataCoord.podLabels	Extra labels for data coordinator pods	{}
dataCoord.podAnnotations	Annotations for data coordinator pods	{}
dataCoord.podAffinityPreset	Pod affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
dataCoord.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	soft
dataCoord.nodeAffinityPreset.type	Node affinity preset type. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
dataCoord.nodeAffinityPreset.key	Node label key to match. Ignored if data coordinator.affinity is set	""
dataCoord.nodeAffinityPreset.values	Node label values to match. Ignored if data coordinator.affinity is set	[]
dataCoord.affinity	Affinity for Data Coordinator pods assignment	{}
dataCoord.nodeSelector	Node labels for Data Coordinator pods assignment	{}
dataCoord.tolerations	Tolerations for Data Coordinator pods assignment	[]
dataCoord.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
dataCoord.priorityClassName	Data Coordinator pods’ priorityClassName	""
dataCoord.schedulerName	Kubernetes pod scheduler registry	""
dataCoord.updateStrategy.type	Data Coordinator statefulset strategy type	RollingUpdate
dataCoord.updateStrategy.rollingUpdate	Data Coordinator statefulset rolling update configuration parameters	{}
dataCoord.extraVolumes	Optionally specify extra list of additional volumes for the Data Coordinator pod(s)	[]
dataCoord.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Data Coordinator container(s)	[]
dataCoord.sidecars	Add additional sidecar containers to the Data Coordinator pod(s)	[]
dataCoord.enableDefaultInitContainers	Deploy default init containers	true
dataCoord.initContainers	Add additional init containers to the Data Coordinator pod(s)	[]
dataCoord.serviceAccount.create	Enable creation of ServiceAccount for Data Coordinator pods	true
dataCoord.serviceAccount.name	The name of the ServiceAccount to use	""
dataCoord.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
dataCoord.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
dataCoord.pdb.create	Enable/disable a Pod Disruption Budget creation	true
dataCoord.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
dataCoord.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both dataCoord.pdb.minAvailable and dataCoord.pdb.maxUnavailable are empty.	{}

Data Coordinator Autoscaling configuration

Name	Description	Value
dataCoord.autoscaling.vpa.enabled	Enable VPA	false
dataCoord.autoscaling.vpa.annotations	Annotations for VPA resource	{}
dataCoord.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
dataCoord.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
dataCoord.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
dataCoord.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
dataCoord.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
dataCoord.autoscaling.hpa.annotations	Annotations for HPA resource	{}
dataCoord.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
dataCoord.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
dataCoord.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
dataCoord.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Data Coordinator Traffic Exposure Parameters

Name	Description	Value
dataCoord.service.type	Data Coordinator service type	ClusterIP
dataCoord.service.ports.grpc	Data Coordinator GRPC service port	19530
dataCoord.service.ports.metrics	Data Coordinator Metrics service port	9091
dataCoord.service.nodePorts.grpc	Node port for GRPC	""
dataCoord.service.nodePorts.metrics	Node port for Metrics	""
dataCoord.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
dataCoord.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
dataCoord.service.clusterIP	Data Coordinator service Cluster IP	""
dataCoord.service.loadBalancerIP	Data Coordinator service Load Balancer IP	""
dataCoord.service.loadBalancerSourceRanges	Data Coordinator service Load Balancer sources	[]
dataCoord.service.externalTrafficPolicy	Data Coordinator service external traffic policy	Cluster
dataCoord.service.annotations	Additional custom annotations for Data Coordinator service	{}
dataCoord.service.extraPorts	Extra ports to expose in the Data Coordinator service	[]
dataCoord.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
dataCoord.networkPolicy.allowExternal	The Policy model to apply	true
dataCoord.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
dataCoord.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
dataCoord.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
dataCoord.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
dataCoord.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Data Coordinator Metrics Parameters

Name	Description	Value
dataCoord.metrics.enabled	Enable metrics	false
dataCoord.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
dataCoord.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
dataCoord.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
dataCoord.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
dataCoord.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
dataCoord.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
dataCoord.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
dataCoord.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
dataCoord.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
dataCoord.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
dataCoord.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
dataCoord.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Root Coordinator Deployment Parameters

Name	Description	Value
rootCoord.enabled	Enable Root Coordinator deployment	true
rootCoord.extraEnvVars	Array with extra environment variables to add to data coordinator nodes	[]
rootCoord.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data coordinator nodes	""
rootCoord.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data coordinator nodes	""
rootCoord.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
rootCoord.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
rootCoord.extraConfig	Override configuration	{}
rootCoord.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
rootCoord.command	Override default container command (useful when using custom images)	[]
rootCoord.args	Override default container args (useful when using custom images)	[]
rootCoord.replicaCount	Number of Root Coordinator replicas to deploy	1
rootCoord.containerPorts.grpc	GRPC port for Root Coordinator	19530
rootCoord.containerPorts.metrics	Metrics port for Root Coordinator	9091
rootCoord.livenessProbe.enabled	Enable livenessProbe on Root Coordinator nodes	true
rootCoord.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
rootCoord.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
rootCoord.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
rootCoord.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
rootCoord.livenessProbe.successThreshold	Success threshold for livenessProbe	1
rootCoord.readinessProbe.enabled	Enable readinessProbe on Root Coordinator nodes	true
rootCoord.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
rootCoord.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
rootCoord.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
rootCoord.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
rootCoord.readinessProbe.successThreshold	Success threshold for readinessProbe	1
rootCoord.startupProbe.enabled	Enable startupProbe on Root Coordinator containers	false
rootCoord.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
rootCoord.startupProbe.periodSeconds	Period seconds for startupProbe	10
rootCoord.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
rootCoord.startupProbe.failureThreshold	Failure threshold for startupProbe	5
rootCoord.startupProbe.successThreshold	Success threshold for startupProbe	1
rootCoord.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
rootCoord.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
rootCoord.customStartupProbe	Custom startupProbe that overrides the default one	{}
rootCoord.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if rootCoord.resources is set (rootCoord.resources is recommended for production).	micro
rootCoord.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
rootCoord.podSecurityContext.enabled	Enabled Root Coordinator pods’ Security Context	true
rootCoord.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
rootCoord.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
rootCoord.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
rootCoord.podSecurityContext.fsGroup	Set Root Coordinator pod’s Security Context fsGroup	1001
rootCoord.containerSecurityContext.enabled	Enabled containers’ Security Context	true
rootCoord.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
rootCoord.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
rootCoord.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
rootCoord.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
rootCoord.containerSecurityContext.privileged	Set container’s Security Context privileged	false
rootCoord.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
rootCoord.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
rootCoord.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
rootCoord.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
rootCoord.lifecycleHooks	for the data coordinator container(s) to automate configuration before or after startup	{}
rootCoord.runtimeClassName	Name of the runtime class to be used by pod(s)	""
rootCoord.automountServiceAccountToken	Mount Service Account token in pod	false
rootCoord.hostAliases	data coordinator pods host aliases	[]
rootCoord.podLabels	Extra labels for data coordinator pods	{}
rootCoord.podAnnotations	Annotations for data coordinator pods	{}
rootCoord.podAffinityPreset	Pod affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
rootCoord.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	soft
rootCoord.nodeAffinityPreset.type	Node affinity preset type. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
rootCoord.nodeAffinityPreset.key	Node label key to match. Ignored if data coordinator.affinity is set	""
rootCoord.nodeAffinityPreset.values	Node label values to match. Ignored if data coordinator.affinity is set	[]
rootCoord.affinity	Affinity for Root Coordinator pods assignment	{}
rootCoord.nodeSelector	Node labels for Root Coordinator pods assignment	{}
rootCoord.tolerations	Tolerations for Root Coordinator pods assignment	[]
rootCoord.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
rootCoord.priorityClassName	Root Coordinator pods’ priorityClassName	""
rootCoord.schedulerName	Kubernetes pod scheduler registry	""
rootCoord.updateStrategy.type	Root Coordinator statefulset strategy type	RollingUpdate
rootCoord.updateStrategy.rollingUpdate	Root Coordinator statefulset rolling update configuration parameters	{}
rootCoord.extraVolumes	Optionally specify extra list of additional volumes for the Root Coordinator pod(s)	[]
rootCoord.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Root Coordinator container(s)	[]
rootCoord.sidecars	Add additional sidecar containers to the Root Coordinator pod(s)	[]
rootCoord.enableDefaultInitContainers	Deploy default init containers	true
rootCoord.initContainers	Add additional init containers to the Root Coordinator pod(s)	[]
rootCoord.serviceAccount.create	Enable creation of ServiceAccount for Root Coordinator pods	true
rootCoord.serviceAccount.name	The name of the ServiceAccount to use	""
rootCoord.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
rootCoord.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
rootCoord.pdb.create	Enable/disable a Pod Disruption Budget creation	true
rootCoord.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
rootCoord.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both rootCoord.pdb.minAvailable and rootCoord.pdb.maxUnavailable are empty.	{}

Root Coordinator Autoscaling configuration

Name	Description	Value
rootCoord.autoscaling.vpa.enabled	Enable VPA	false
rootCoord.autoscaling.vpa.annotations	Annotations for VPA resource	{}
rootCoord.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
rootCoord.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
rootCoord.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
rootCoord.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
rootCoord.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
rootCoord.autoscaling.hpa.annotations	Annotations for HPA resource	{}
rootCoord.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
rootCoord.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
rootCoord.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
rootCoord.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Root Coordinator Traffic Exposure Parameters

Name	Description	Value
rootCoord.service.type	Root Coordinator service type	ClusterIP
rootCoord.service.ports.grpc	Root Coordinator GRPC service port	19530
rootCoord.service.ports.metrics	Root Coordinator Metrics service port	9091
rootCoord.service.nodePorts.grpc	Node port for GRPC	""
rootCoord.service.nodePorts.metrics	Node port for Metrics	""
rootCoord.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
rootCoord.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
rootCoord.service.clusterIP	Root Coordinator service Cluster IP	""
rootCoord.service.loadBalancerIP	Root Coordinator service Load Balancer IP	""
rootCoord.service.loadBalancerSourceRanges	Root Coordinator service Load Balancer sources	[]
rootCoord.service.externalTrafficPolicy	Root Coordinator service external traffic policy	Cluster
rootCoord.service.annotations	Additional custom annotations for Root Coordinator service	{}
rootCoord.service.extraPorts	Extra ports to expose in the Root Coordinator service	[]
rootCoord.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
rootCoord.networkPolicy.allowExternal	The Policy model to apply	true
rootCoord.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
rootCoord.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
rootCoord.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
rootCoord.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
rootCoord.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Root Coordinator Metrics Parameters

Name	Description	Value
rootCoord.metrics.enabled	Enable metrics	false
rootCoord.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
rootCoord.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
rootCoord.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
rootCoord.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
rootCoord.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
rootCoord.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
rootCoord.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
rootCoord.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
rootCoord.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
rootCoord.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
rootCoord.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
rootCoord.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Query Coordinator Deployment Parameters

Name	Description	Value
queryCoord.enabled	Enable Query Coordinator deployment	true
queryCoord.extraEnvVars	Array with extra environment variables to add to data coordinator nodes	[]
queryCoord.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data coordinator nodes	""
queryCoord.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data coordinator nodes	""
queryCoord.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
queryCoord.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
queryCoord.extraConfig	Override configuration	{}
queryCoord.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
queryCoord.command	Override default container command (useful when using custom images)	[]
queryCoord.args	Override default container args (useful when using custom images)	[]
queryCoord.replicaCount	Number of Query Coordinator replicas to deploy	1
queryCoord.containerPorts.grpc	GRPC port for Query Coordinator	19530
queryCoord.containerPorts.metrics	Metrics port for Query Coordinator	9091
queryCoord.livenessProbe.enabled	Enable livenessProbe on Query Coordinator nodes	true
queryCoord.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
queryCoord.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryCoord.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
queryCoord.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
queryCoord.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryCoord.readinessProbe.enabled	Enable readinessProbe on Query Coordinator nodes	true
queryCoord.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
queryCoord.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryCoord.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
queryCoord.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
queryCoord.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryCoord.startupProbe.enabled	Enable startupProbe on Query Coordinator containers	false
queryCoord.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
queryCoord.startupProbe.periodSeconds	Period seconds for startupProbe	10
queryCoord.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
queryCoord.startupProbe.failureThreshold	Failure threshold for startupProbe	5
queryCoord.startupProbe.successThreshold	Success threshold for startupProbe	1
queryCoord.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
queryCoord.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
queryCoord.customStartupProbe	Custom startupProbe that overrides the default one	{}
queryCoord.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if queryCoord.resources is set (queryCoord.resources is recommended for production).	micro
queryCoord.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
queryCoord.podSecurityContext.enabled	Enabled Query Coordinator pods’ Security Context	true
queryCoord.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
queryCoord.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
queryCoord.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
queryCoord.podSecurityContext.fsGroup	Set Query Coordinator pod’s Security Context fsGroup	1001
queryCoord.containerSecurityContext.enabled	Enabled containers’ Security Context	true
queryCoord.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
queryCoord.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
queryCoord.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
queryCoord.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
queryCoord.containerSecurityContext.privileged	Set container’s Security Context privileged	false
queryCoord.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
queryCoord.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
queryCoord.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
queryCoord.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
queryCoord.lifecycleHooks	for the data coordinator container(s) to automate configuration before or after startup	{}
queryCoord.runtimeClassName	Name of the runtime class to be used by pod(s)	""
queryCoord.automountServiceAccountToken	Mount Service Account token in pod	false
queryCoord.hostAliases	data coordinator pods host aliases	[]
queryCoord.podLabels	Extra labels for data coordinator pods	{}
queryCoord.podAnnotations	Annotations for data coordinator pods	{}
queryCoord.podAffinityPreset	Pod affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
queryCoord.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	soft
queryCoord.nodeAffinityPreset.type	Node affinity preset type. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
queryCoord.nodeAffinityPreset.key	Node label key to match. Ignored if data coordinator.affinity is set	""
queryCoord.nodeAffinityPreset.values	Node label values to match. Ignored if data coordinator.affinity is set	[]
queryCoord.affinity	Affinity for Query Coordinator pods assignment	{}
queryCoord.nodeSelector	Node labels for Query Coordinator pods assignment	{}
queryCoord.tolerations	Tolerations for Query Coordinator pods assignment	[]
queryCoord.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
queryCoord.priorityClassName	Query Coordinator pods’ priorityClassName	""
queryCoord.schedulerName	Kubernetes pod scheduler registry	""
queryCoord.updateStrategy.type	Query Coordinator statefulset strategy type	RollingUpdate
queryCoord.updateStrategy.rollingUpdate	Query Coordinator statefulset rolling update configuration parameters	{}
queryCoord.extraVolumes	Optionally specify extra list of additional volumes for the Query Coordinator pod(s)	[]
queryCoord.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Query Coordinator container(s)	[]
queryCoord.sidecars	Add additional sidecar containers to the Query Coordinator pod(s)	[]
queryCoord.enableDefaultInitContainers	Deploy default init containers	true
queryCoord.initContainers	Add additional init containers to the Query Coordinator pod(s)	[]
queryCoord.serviceAccount.create	Enable creation of ServiceAccount for Query Coordinator pods	true
queryCoord.serviceAccount.name	The name of the ServiceAccount to use	""
queryCoord.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
queryCoord.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
queryCoord.pdb.create	Enable/disable a Pod Disruption Budget creation	true
queryCoord.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
queryCoord.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both queryCoord.pdb.minAvailable and queryCoord.pdb.maxUnavailable are empty.	{}

Query Coordinator Autoscaling configuration

Name	Description	Value
queryCoord.autoscaling.vpa.enabled	Enable VPA	false
queryCoord.autoscaling.vpa.annotations	Annotations for VPA resource	{}
queryCoord.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
queryCoord.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
queryCoord.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
queryCoord.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
queryCoord.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
queryCoord.autoscaling.hpa.annotations	Annotations for HPA resource	{}
queryCoord.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
queryCoord.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
queryCoord.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
queryCoord.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Query Coordinator Traffic Exposure Parameters

Name	Description	Value
queryCoord.service.type	Query Coordinator service type	ClusterIP
queryCoord.service.ports.grpc	Query Coordinator GRPC service port	19530
queryCoord.service.ports.metrics	Query Coordinator Metrics service port	9091
queryCoord.service.nodePorts.grpc	Node port for GRPC	""
queryCoord.service.nodePorts.metrics	Node port for Metrics	""
queryCoord.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
queryCoord.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
queryCoord.service.clusterIP	Query Coordinator service Cluster IP	""
queryCoord.service.loadBalancerIP	Query Coordinator service Load Balancer IP	""
queryCoord.service.loadBalancerSourceRanges	Query Coordinator service Load Balancer sources	[]
queryCoord.service.externalTrafficPolicy	Query Coordinator service external traffic policy	Cluster
queryCoord.service.annotations	Additional custom annotations for Query Coordinator service	{}
queryCoord.service.extraPorts	Extra ports to expose in the Query Coordinator service	[]
queryCoord.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
queryCoord.networkPolicy.allowExternal	The Policy model to apply	true
queryCoord.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
queryCoord.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
queryCoord.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
queryCoord.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
queryCoord.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Query Coordinator Metrics Parameters

Name	Description	Value
queryCoord.metrics.enabled	Enable metrics	false
queryCoord.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
queryCoord.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
queryCoord.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
queryCoord.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
queryCoord.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
queryCoord.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
queryCoord.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
queryCoord.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
queryCoord.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
queryCoord.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
queryCoord.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
queryCoord.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Index Coordinator Deployment Parameters

Name	Description	Value
indexCoord.enabled	Enable Index Coordinator deployment	true
indexCoord.extraEnvVars	Array with extra environment variables to add to data coordinator nodes	[]
indexCoord.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data coordinator nodes	""
indexCoord.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data coordinator nodes	""
indexCoord.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
indexCoord.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
indexCoord.extraConfig	Override configuration	{}
indexCoord.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
indexCoord.command	Override default container command (useful when using custom images)	[]
indexCoord.args	Override default container args (useful when using custom images)	[]
indexCoord.replicaCount	Number of Index Coordinator replicas to deploy	1
indexCoord.containerPorts.grpc	GRPC port for Index Coordinator	19530
indexCoord.containerPorts.metrics	Metrics port for Index Coordinator	9091
indexCoord.livenessProbe.enabled	Enable livenessProbe on Index Coordinator nodes	true
indexCoord.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
indexCoord.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
indexCoord.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
indexCoord.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
indexCoord.livenessProbe.successThreshold	Success threshold for livenessProbe	1
indexCoord.readinessProbe.enabled	Enable readinessProbe on Index Coordinator nodes	true
indexCoord.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
indexCoord.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
indexCoord.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
indexCoord.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
indexCoord.readinessProbe.successThreshold	Success threshold for readinessProbe	1
indexCoord.startupProbe.enabled	Enable startupProbe on Index Coordinator containers	false
indexCoord.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
indexCoord.startupProbe.periodSeconds	Period seconds for startupProbe	10
indexCoord.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
indexCoord.startupProbe.failureThreshold	Failure threshold for startupProbe	5
indexCoord.startupProbe.successThreshold	Success threshold for startupProbe	1
indexCoord.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
indexCoord.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
indexCoord.customStartupProbe	Custom startupProbe that overrides the default one	{}
indexCoord.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if indexCoord.resources is set (indexCoord.resources is recommended for production).	micro
indexCoord.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
indexCoord.podSecurityContext.enabled	Enabled Index Coordinator pods’ Security Context	true
indexCoord.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
indexCoord.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
indexCoord.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
indexCoord.podSecurityContext.fsGroup	Set Index Coordinator pod’s Security Context fsGroup	1001
indexCoord.containerSecurityContext.enabled	Enabled containers’ Security Context	true
indexCoord.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
indexCoord.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
indexCoord.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
indexCoord.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
indexCoord.containerSecurityContext.privileged	Set container’s Security Context privileged	false
indexCoord.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
indexCoord.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
indexCoord.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
indexCoord.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
indexCoord.lifecycleHooks	for the data coordinator container(s) to automate configuration before or after startup	{}
indexCoord.runtimeClassName	Name of the runtime class to be used by pod(s)	""
indexCoord.automountServiceAccountToken	Mount Service Account token in pod	false
indexCoord.hostAliases	data coordinator pods host aliases	[]
indexCoord.podLabels	Extra labels for data coordinator pods	{}
indexCoord.podAnnotations	Annotations for data coordinator pods	{}
indexCoord.podAffinityPreset	Pod affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
indexCoord.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	soft
indexCoord.nodeAffinityPreset.type	Node affinity preset type. Ignored if data coordinator.affinity is set. Allowed values: soft or hard	""
indexCoord.nodeAffinityPreset.key	Node label key to match. Ignored if data coordinator.affinity is set	""
indexCoord.nodeAffinityPreset.values	Node label values to match. Ignored if data coordinator.affinity is set	[]
indexCoord.affinity	Affinity for Index Coordinator pods assignment	{}
indexCoord.nodeSelector	Node labels for Index Coordinator pods assignment	{}
indexCoord.tolerations	Tolerations for Index Coordinator pods assignment	[]
indexCoord.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
indexCoord.priorityClassName	Index Coordinator pods’ priorityClassName	""
indexCoord.schedulerName	Kubernetes pod scheduler registry	""
indexCoord.updateStrategy.type	Index Coordinator statefulset strategy type	RollingUpdate
indexCoord.updateStrategy.rollingUpdate	Index Coordinator statefulset rolling update configuration parameters	{}
indexCoord.extraVolumes	Optionally specify extra list of additional volumes for the Index Coordinator pod(s)	[]
indexCoord.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Index Coordinator container(s)	[]
indexCoord.sidecars	Add additional sidecar containers to the Index Coordinator pod(s)	[]
indexCoord.enableDefaultInitContainers	Deploy default init containers	true
indexCoord.initContainers	Add additional init containers to the Index Coordinator pod(s)	[]
indexCoord.serviceAccount.create	Enable creation of ServiceAccount for Index Coordinator pods	true
indexCoord.serviceAccount.name	The name of the ServiceAccount to use	""
indexCoord.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
indexCoord.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
indexCoord.pdb.create	Enable/disable a Pod Disruption Budget creation	true
indexCoord.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
indexCoord.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable.Defaults to 1 if both queryCoord.pdb.minAvailable and queryCoord.pdb.maxUnavailable are empty.	{}

Index Coordinator Autoscaling configuration

Name	Description	Value
indexCoord.autoscaling.vpa.enabled	Enable VPA	false
indexCoord.autoscaling.vpa.annotations	Annotations for VPA resource	{}
indexCoord.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
indexCoord.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
indexCoord.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
indexCoord.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
indexCoord.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
indexCoord.autoscaling.hpa.annotations	Annotations for HPA resource	{}
indexCoord.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
indexCoord.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
indexCoord.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
indexCoord.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Index Coordinator Traffic Exposure Parameters

Name	Description	Value
indexCoord.service.type	Index Coordinator service type	ClusterIP
indexCoord.service.ports.grpc	Index Coordinator GRPC service port	19530
indexCoord.service.ports.metrics	Index Coordinator Metrics service port	9091
indexCoord.service.nodePorts.grpc	Node port for GRPC	""
indexCoord.service.nodePorts.metrics	Node port for Metrics	""
indexCoord.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
indexCoord.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
indexCoord.service.clusterIP	Index Coordinator service Cluster IP	""
indexCoord.service.loadBalancerIP	Index Coordinator service Load Balancer IP	""
indexCoord.service.loadBalancerSourceRanges	Index Coordinator service Load Balancer sources	[]
indexCoord.service.externalTrafficPolicy	Index Coordinator service external traffic policy	Cluster
indexCoord.service.annotations	Additional custom annotations for Index Coordinator service	{}
indexCoord.service.extraPorts	Extra ports to expose in the Index Coordinator service	[]
indexCoord.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
indexCoord.networkPolicy.allowExternal	The Policy model to apply	true
indexCoord.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
indexCoord.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
indexCoord.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
indexCoord.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
indexCoord.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Index Coordinator Metrics Parameters

Name	Description	Value
indexCoord.metrics.enabled	Enable metrics	false
indexCoord.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
indexCoord.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
indexCoord.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
indexCoord.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
indexCoord.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
indexCoord.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
indexCoord.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
indexCoord.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
indexCoord.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
indexCoord.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
indexCoord.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
indexCoord.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Data Node Deployment Parameters

Name	Description	Value
dataNode.enabled	Enable Data Node deployment	true
dataNode.extraEnvVars	Array with extra environment variables to add to data node nodes	[]
dataNode.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data node nodes	""
dataNode.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data node nodes	""
dataNode.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
dataNode.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
dataNode.extraConfig	Override configuration	{}
dataNode.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
dataNode.command	Override default container command (useful when using custom images)	[]
dataNode.args	Override default container args (useful when using custom images)	[]
dataNode.replicaCount	Number of Data Node replicas to deploy	1
dataNode.containerPorts.grpc	GRPC port for Data Node	19530
dataNode.containerPorts.metrics	Metrics port for Data Node	9091
dataNode.livenessProbe.enabled	Enable livenessProbe on Data Node nodes	true
dataNode.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
dataNode.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
dataNode.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
dataNode.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
dataNode.livenessProbe.successThreshold	Success threshold for livenessProbe	1
dataNode.readinessProbe.enabled	Enable readinessProbe on Data Node nodes	true
dataNode.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
dataNode.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
dataNode.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
dataNode.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
dataNode.readinessProbe.successThreshold	Success threshold for readinessProbe	1
dataNode.startupProbe.enabled	Enable startupProbe on Data Node containers	false
dataNode.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
dataNode.startupProbe.periodSeconds	Period seconds for startupProbe	10
dataNode.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
dataNode.startupProbe.failureThreshold	Failure threshold for startupProbe	5
dataNode.startupProbe.successThreshold	Success threshold for startupProbe	1
dataNode.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
dataNode.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
dataNode.customStartupProbe	Custom startupProbe that overrides the default one	{}
dataNode.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if dataNode.resources is set (dataNode.resources is recommended for production).	micro
dataNode.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
dataNode.podSecurityContext.enabled	Enabled Data Node pods’ Security Context	true
dataNode.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
dataNode.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
dataNode.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
dataNode.podSecurityContext.fsGroup	Set Data Node pod’s Security Context fsGroup	1001
dataNode.containerSecurityContext.enabled	Enabled containers’ Security Context	true
dataNode.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
dataNode.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
dataNode.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
dataNode.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
dataNode.containerSecurityContext.privileged	Set container’s Security Context privileged	false
dataNode.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
dataNode.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
dataNode.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
dataNode.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
dataNode.lifecycleHooks	for the data node container(s) to automate configuration before or after startup	{}
dataNode.runtimeClassName	Name of the runtime class to be used by pod(s)	""
dataNode.automountServiceAccountToken	Mount Service Account token in pod	false
dataNode.hostAliases	data node pods host aliases	[]
dataNode.podLabels	Extra labels for data node pods	{}
dataNode.podAnnotations	Annotations for data node pods	{}
dataNode.podAffinityPreset	Pod affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	""
dataNode.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	soft
dataNode.nodeAffinityPreset.type	Node affinity preset type. Ignored if data node.affinity is set. Allowed values: soft or hard	""
dataNode.nodeAffinityPreset.key	Node label key to match. Ignored if data node.affinity is set	""
dataNode.nodeAffinityPreset.values	Node label values to match. Ignored if data node.affinity is set	[]
dataNode.affinity	Affinity for Data Node pods assignment	{}
dataNode.nodeSelector	Node labels for Data Node pods assignment	{}
dataNode.tolerations	Tolerations for Data Node pods assignment	[]
dataNode.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
dataNode.priorityClassName	Data Node pods’ priorityClassName	""
dataNode.schedulerName	Kubernetes pod scheduler registry	""
dataNode.updateStrategy.type	Data Node statefulset strategy type	RollingUpdate
dataNode.updateStrategy.rollingUpdate	Data Node statefulset rolling update configuration parameters	{}
dataNode.extraVolumes	Optionally specify extra list of additional volumes for the Data Node pod(s)	[]
dataNode.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Data Node container(s)	[]
dataNode.sidecars	Add additional sidecar containers to the Data Node pod(s)	[]
dataNode.enableDefaultInitContainers	Deploy default init containers	true
dataNode.initContainers	Add additional init containers to the Data Node pod(s)	[]
dataNode.serviceAccount.create	Enable creation of ServiceAccount for Data Node pods	true
dataNode.serviceAccount.name	The name of the ServiceAccount to use	""
dataNode.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
dataNode.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
dataNode.pdb.create	Enable/disable a Pod Disruption Budget creation	true
dataNode.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
dataNode.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both dataNode.pdb.minAvailable and dataNode.pdb.maxUnavailable are empty.	{}

Data Node Autoscaling configuration

Name	Description	Value
dataNode.autoscaling.vpa.enabled	Enable VPA	false
dataNode.autoscaling.vpa.annotations	Annotations for VPA resource	{}
dataNode.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
dataNode.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
dataNode.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
dataNode.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
dataNode.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
dataNode.autoscaling.hpa.annotations	Annotations for HPA resource	{}
dataNode.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
dataNode.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
dataNode.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
dataNode.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Data Node Traffic Exposure Parameters

Name	Description	Value
dataNode.service.type	Data Node service type	ClusterIP
dataNode.service.ports.grpc	Data Node GRPC service port	19530
dataNode.service.ports.metrics	Data Node Metrics service port	9091
dataNode.service.nodePorts.grpc	Node port for GRPC	""
dataNode.service.nodePorts.metrics	Node port for Metrics	""
dataNode.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
dataNode.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
dataNode.service.clusterIP	Data Node service Cluster IP	""
dataNode.service.loadBalancerIP	Data Node service Load Balancer IP	""
dataNode.service.loadBalancerSourceRanges	Data Node service Load Balancer sources	[]
dataNode.service.externalTrafficPolicy	Data Node service external traffic policy	Cluster
dataNode.service.annotations	Additional custom annotations for Data Node service	{}
dataNode.service.extraPorts	Extra ports to expose in the Data Node service	[]
dataNode.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
dataNode.networkPolicy.allowExternal	The Policy model to apply	true
dataNode.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
dataNode.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
dataNode.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
dataNode.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
dataNode.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Data Node Metrics Parameters

Name	Description	Value
dataNode.metrics.enabled	Enable metrics	false
dataNode.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
dataNode.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
dataNode.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
dataNode.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
dataNode.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
dataNode.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
dataNode.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
dataNode.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
dataNode.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
dataNode.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
dataNode.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
dataNode.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Query Node Deployment Parameters

Name	Description	Value
queryNode.enabled	Enable Query Node deployment	true
queryNode.extraEnvVars	Array with extra environment variables to add to data node nodes	[]
queryNode.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data node nodes	""
queryNode.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data node nodes	""
queryNode.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
queryNode.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
queryNode.extraConfig	Override configuration	{}
queryNode.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
queryNode.command	Override default container command (useful when using custom images)	[]
queryNode.args	Override default container args (useful when using custom images)	[]
queryNode.replicaCount	Number of Query Node replicas to deploy	1
queryNode.containerPorts.grpc	GRPC port for Query Node	19530
queryNode.containerPorts.metrics	Metrics port for Query Node	9091
queryNode.livenessProbe.enabled	Enable livenessProbe on Query Node nodes	true
queryNode.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
queryNode.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryNode.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
queryNode.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
queryNode.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryNode.readinessProbe.enabled	Enable readinessProbe on Query Node nodes	true
queryNode.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
queryNode.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryNode.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
queryNode.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
queryNode.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryNode.startupProbe.enabled	Enable startupProbe on Query Node containers	false
queryNode.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
queryNode.startupProbe.periodSeconds	Period seconds for startupProbe	10
queryNode.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
queryNode.startupProbe.failureThreshold	Failure threshold for startupProbe	5
queryNode.startupProbe.successThreshold	Success threshold for startupProbe	1
queryNode.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
queryNode.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
queryNode.customStartupProbe	Custom startupProbe that overrides the default one	{}
queryNode.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if queryNode.resources is set (queryNode.resources is recommended for production).	micro
queryNode.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
queryNode.podSecurityContext.enabled	Enabled Query Node pods’ Security Context	true
queryNode.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
queryNode.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
queryNode.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
queryNode.podSecurityContext.fsGroup	Set Query Node pod’s Security Context fsGroup	1001
queryNode.containerSecurityContext.enabled	Enabled containers’ Security Context	true
queryNode.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
queryNode.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
queryNode.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
queryNode.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
queryNode.containerSecurityContext.privileged	Set container’s Security Context privileged	false
queryNode.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
queryNode.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
queryNode.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
queryNode.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
queryNode.lifecycleHooks	for the data node container(s) to automate configuration before or after startup	{}
queryNode.runtimeClassName	Name of the runtime class to be used by pod(s)	""
queryNode.automountServiceAccountToken	Mount Service Account token in pod	false
queryNode.hostAliases	data node pods host aliases	[]
queryNode.podLabels	Extra labels for data node pods	{}
queryNode.podAnnotations	Annotations for data node pods	{}
queryNode.podAffinityPreset	Pod affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	""
queryNode.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	soft
queryNode.nodeAffinityPreset.type	Node affinity preset type. Ignored if data node.affinity is set. Allowed values: soft or hard	""
queryNode.nodeAffinityPreset.key	Node label key to match. Ignored if data node.affinity is set	""
queryNode.nodeAffinityPreset.values	Node label values to match. Ignored if data node.affinity is set	[]
queryNode.affinity	Affinity for Query Node pods assignment	{}
queryNode.nodeSelector	Node labels for Query Node pods assignment	{}
queryNode.tolerations	Tolerations for Query Node pods assignment	[]
queryNode.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
queryNode.priorityClassName	Query Node pods’ priorityClassName	""
queryNode.schedulerName	Kubernetes pod scheduler registry	""
queryNode.updateStrategy.type	Query Node statefulset strategy type	RollingUpdate
queryNode.updateStrategy.rollingUpdate	Query Node statefulset rolling update configuration parameters	{}
queryNode.extraVolumes	Optionally specify extra list of additional volumes for the Query Node pod(s)	[]
queryNode.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Query Node container(s)	[]
queryNode.sidecars	Add additional sidecar containers to the Query Node pod(s)	[]
queryNode.enableDefaultInitContainers	Deploy default init containers	true
queryNode.initContainers	Add additional init containers to the Query Node pod(s)	[]
queryNode.serviceAccount.create	Enable creation of ServiceAccount for Query Node pods	true
queryNode.serviceAccount.name	The name of the ServiceAccount to use	""
queryNode.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
queryNode.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
queryNode.pdb.create	Enable/disable a Pod Disruption Budget creation	true
queryNode.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
queryNode.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both queryNode.pdb.minAvailable and queryNode.pdb.maxUnavailable are empty.	{}

Query Node Autoscaling configuration

Name	Description	Value
queryNode.autoscaling.vpa.enabled	Enable VPA	false
queryNode.autoscaling.vpa.annotations	Annotations for VPA resource	{}
queryNode.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
queryNode.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
queryNode.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
queryNode.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
queryNode.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
queryNode.autoscaling.hpa.annotations	Annotations for HPA resource	{}
queryNode.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
queryNode.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
queryNode.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
queryNode.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Query Node Traffic Exposure Parameters

Name	Description	Value
queryNode.service.type	Query Node service type	ClusterIP
queryNode.service.ports.grpc	Query Node GRPC service port	19530
queryNode.service.ports.metrics	Query Node Metrics service port	9091
queryNode.service.nodePorts.grpc	Node port for GRPC	""
queryNode.service.nodePorts.metrics	Node port for Metrics	""
queryNode.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
queryNode.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
queryNode.service.clusterIP	Query Node service Cluster IP	""
queryNode.service.loadBalancerIP	Query Node service Load Balancer IP	""
queryNode.service.loadBalancerSourceRanges	Query Node service Load Balancer sources	[]
queryNode.service.externalTrafficPolicy	Query Node service external traffic policy	Cluster
queryNode.service.annotations	Additional custom annotations for Query Node service	{}
queryNode.service.extraPorts	Extra ports to expose in the Query Node service	[]
queryNode.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
queryNode.networkPolicy.allowExternal	The Policy model to apply	true
queryNode.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
queryNode.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
queryNode.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
queryNode.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
queryNode.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Query Node Metrics Parameters

Name	Description	Value
queryNode.metrics.enabled	Enable metrics	false
queryNode.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
queryNode.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
queryNode.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
queryNode.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
queryNode.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
queryNode.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
queryNode.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
queryNode.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
queryNode.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
queryNode.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
queryNode.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
queryNode.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Index Node Deployment Parameters

Name	Description	Value
indexNode.enabled	Enable Index Node deployment	true
indexNode.extraEnvVars	Array with extra environment variables to add to data node nodes	[]
indexNode.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for data node nodes	""
indexNode.extraEnvVarsSecret	Name of existing Secret containing extra env vars for data node nodes	""
indexNode.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
indexNode.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
indexNode.extraConfig	Override configuration	{}
indexNode.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
indexNode.command	Override default container command (useful when using custom images)	[]
indexNode.args	Override default container args (useful when using custom images)	[]
indexNode.replicaCount	Number of Index Node replicas to deploy	1
indexNode.containerPorts.grpc	GRPC port for Index Node	19530
indexNode.containerPorts.metrics	Metrics port for Index Node	9091
indexNode.livenessProbe.enabled	Enable livenessProbe on Index Node nodes	true
indexNode.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
indexNode.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
indexNode.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
indexNode.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
indexNode.livenessProbe.successThreshold	Success threshold for livenessProbe	1
indexNode.readinessProbe.enabled	Enable readinessProbe on Index Node nodes	true
indexNode.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
indexNode.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
indexNode.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
indexNode.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
indexNode.readinessProbe.successThreshold	Success threshold for readinessProbe	1
indexNode.startupProbe.enabled	Enable startupProbe on Index Node containers	false
indexNode.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
indexNode.startupProbe.periodSeconds	Period seconds for startupProbe	10
indexNode.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
indexNode.startupProbe.failureThreshold	Failure threshold for startupProbe	5
indexNode.startupProbe.successThreshold	Success threshold for startupProbe	1
indexNode.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
indexNode.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
indexNode.customStartupProbe	Custom startupProbe that overrides the default one	{}
indexNode.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if indexNode.resources is set (indexNode.resources is recommended for production).	micro
indexNode.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
indexNode.podSecurityContext.enabled	Enabled Index Node pods’ Security Context	true
indexNode.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
indexNode.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
indexNode.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
indexNode.podSecurityContext.fsGroup	Set Index Node pod’s Security Context fsGroup	1001
indexNode.containerSecurityContext.enabled	Enabled containers’ Security Context	true
indexNode.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
indexNode.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
indexNode.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
indexNode.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
indexNode.containerSecurityContext.privileged	Set container’s Security Context privileged	false
indexNode.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
indexNode.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
indexNode.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
indexNode.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
indexNode.lifecycleHooks	for the data node container(s) to automate configuration before or after startup	{}
indexNode.runtimeClassName	Name of the runtime class to be used by pod(s)	""
indexNode.automountServiceAccountToken	Mount Service Account token in pod	false
indexNode.hostAliases	data node pods host aliases	[]
indexNode.podLabels	Extra labels for data node pods	{}
indexNode.podAnnotations	Annotations for data node pods	{}
indexNode.podAffinityPreset	Pod affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	""
indexNode.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if data node.affinity is set. Allowed values: soft or hard	soft
indexNode.nodeAffinityPreset.type	Node affinity preset type. Ignored if data node.affinity is set. Allowed values: soft or hard	""
indexNode.nodeAffinityPreset.key	Node label key to match. Ignored if data node.affinity is set	""
indexNode.nodeAffinityPreset.values	Node label values to match. Ignored if data node.affinity is set	[]
indexNode.affinity	Affinity for Index Node pods assignment	{}
indexNode.nodeSelector	Node labels for Index Node pods assignment	{}
indexNode.tolerations	Tolerations for Index Node pods assignment	[]
indexNode.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
indexNode.priorityClassName	Index Node pods’ priorityClassName	""
indexNode.schedulerName	Kubernetes pod scheduler registry	""
indexNode.updateStrategy.type	Index Node statefulset strategy type	RollingUpdate
indexNode.updateStrategy.rollingUpdate	Index Node statefulset rolling update configuration parameters	{}
indexNode.extraVolumes	Optionally specify extra list of additional volumes for the Index Node pod(s)	[]
indexNode.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Index Node container(s)	[]
indexNode.sidecars	Add additional sidecar containers to the Index Node pod(s)	[]
indexNode.enableDefaultInitContainers	Deploy default init containers	true
indexNode.initContainers	Add additional init containers to the Index Node pod(s)	[]
indexNode.serviceAccount.create	Enable creation of ServiceAccount for Index Node pods	true
indexNode.serviceAccount.name	The name of the ServiceAccount to use	""
indexNode.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
indexNode.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
indexNode.pdb.create	Enable/disable a Pod Disruption Budget creation	true
indexNode.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
indexNode.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both indexNode.pdb.minAvailable and indexNode.pdb.maxUnavailable are empty.	{}

Index Node Autoscaling configuration

Name	Description	Value
indexNode.autoscaling.vpa.enabled	Enable VPA	false
indexNode.autoscaling.vpa.annotations	Annotations for VPA resource	{}
indexNode.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
indexNode.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
indexNode.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
indexNode.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
indexNode.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
indexNode.autoscaling.hpa.annotations	Annotations for HPA resource	{}
indexNode.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
indexNode.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
indexNode.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
indexNode.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Index Node Traffic Exposure Parameters

Name	Description	Value
indexNode.service.type	Index Node service type	ClusterIP
indexNode.service.ports.grpc	Index Node GRPC service port	19530
indexNode.service.ports.metrics	Index Node Metrics service port	9091
indexNode.service.nodePorts.grpc	Node port for GRPC	""
indexNode.service.nodePorts.metrics	Node port for Metrics	""
indexNode.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
indexNode.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
indexNode.service.clusterIP	Index Node service Cluster IP	""
indexNode.service.loadBalancerIP	Index Node service Load Balancer IP	""
indexNode.service.loadBalancerSourceRanges	Index Node service Load Balancer sources	[]
indexNode.service.externalTrafficPolicy	Index Node service external traffic policy	Cluster
indexNode.service.annotations	Additional custom annotations for Index Node service	{}
indexNode.service.extraPorts	Extra ports to expose in the Index Node service	[]
indexNode.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
indexNode.networkPolicy.allowExternal	The Policy model to apply	true
indexNode.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
indexNode.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
indexNode.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
indexNode.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
indexNode.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Index Node Metrics Parameters

Name	Description	Value
indexNode.metrics.enabled	Enable metrics	false
indexNode.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
indexNode.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
indexNode.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
indexNode.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
indexNode.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
indexNode.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
indexNode.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
indexNode.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
indexNode.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
indexNode.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
indexNode.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
indexNode.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Proxy Deployment Parameters

Name	Description	Value
proxy.enabled	Enable Proxy deployment	true

Proxy TLS Connection Configuration Parameters

Name	Description	Value
proxy.tls.mode	TLS mode for proxy. Allowed values: 0, 1, 2	0
proxy.tls.existingSecret	Name of the existing secret containing the TLS certificates for proxy.	""
proxy.tls.cert	The secret key from the existingSecret if ‘cert’ key different from the default (server.pem)	server.pem
proxy.tls.key	The secret key from the existingSecret if ‘key’ key different from the default (server.key)	server.key
proxy.tls.caCert	The secret key from the existingSecret if ‘caCert’ key different from the default (ca.pem)	ca.pem
proxy.tls.keyPassword	Password to access the password-protected PEM key if necessary.	""
proxy.extraEnvVars	Array with extra environment variables to add to proxy nodes	[]
proxy.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for proxy nodes	""
proxy.extraEnvVarsSecret	Name of existing Secret containing extra env vars for proxy nodes	""
proxy.defaultConfig	Default override configuration from the common set in milvus.defaultConfig	""
proxy.existingConfigMap	name of a ConfigMap with existing configuration for the default configuration	""
proxy.extraConfig	Override configuration	{}
proxy.extraConfigExistingConfigMap	name of a ConfigMap with existing configuration for the Dashboard	""
proxy.command	Override default container command (useful when using custom images)	[]
proxy.args	Override default container args (useful when using custom images)	[]
proxy.replicaCount	Number of Proxy replicas to deploy	1
proxy.containerPorts.grpc	GRPC port for Proxy	19530
proxy.containerPorts.grpcInternal	GRPC internal port for Proxy	19529
proxy.containerPorts.metrics	Metrics port for Proxy	9091
proxy.livenessProbe.enabled	Enable livenessProbe on Proxy nodes	true
proxy.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
proxy.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
proxy.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
proxy.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
proxy.livenessProbe.successThreshold	Success threshold for livenessProbe	1
proxy.readinessProbe.enabled	Enable readinessProbe on Proxy nodes	true
proxy.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
proxy.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
proxy.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
proxy.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
proxy.readinessProbe.successThreshold	Success threshold for readinessProbe	1
proxy.startupProbe.enabled	Enable startupProbe on Proxy containers	false
proxy.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
proxy.startupProbe.periodSeconds	Period seconds for startupProbe	10
proxy.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
proxy.startupProbe.failureThreshold	Failure threshold for startupProbe	5
proxy.startupProbe.successThreshold	Success threshold for startupProbe	1
proxy.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
proxy.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
proxy.customStartupProbe	Custom startupProbe that overrides the default one	{}
proxy.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if proxy.resources is set (proxy.resources is recommended for production).	micro
proxy.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
proxy.podSecurityContext.enabled	Enabled Proxy pods’ Security Context	true
proxy.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
proxy.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
proxy.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
proxy.podSecurityContext.fsGroup	Set Proxy pod’s Security Context fsGroup	1001
proxy.containerSecurityContext.enabled	Enabled containers’ Security Context	true
proxy.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
proxy.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
proxy.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
proxy.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
proxy.containerSecurityContext.privileged	Set container’s Security Context privileged	false
proxy.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
proxy.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
proxy.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
proxy.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
proxy.lifecycleHooks	for the proxy container(s) to automate configuration before or after startup	{}
proxy.runtimeClassName	Name of the runtime class to be used by pod(s)	""
proxy.automountServiceAccountToken	Mount Service Account token in pod	false
proxy.hostAliases	proxy pods host aliases	[]
proxy.podLabels	Extra labels for proxy pods	{}
proxy.podAnnotations	Annotations for proxy pods	{}
proxy.podAffinityPreset	Pod affinity preset. Ignored if proxy.affinity is set. Allowed values: soft or hard	""
proxy.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if proxy.affinity is set. Allowed values: soft or hard	soft
proxy.nodeAffinityPreset.type	Node affinity preset type. Ignored if proxy.affinity is set. Allowed values: soft or hard	""
proxy.nodeAffinityPreset.key	Node label key to match. Ignored if proxy.affinity is set	""
proxy.nodeAffinityPreset.values	Node label values to match. Ignored if proxy.affinity is set	[]
proxy.affinity	Affinity for Proxy pods assignment	{}
proxy.nodeSelector	Node labels for Proxy pods assignment	{}
proxy.tolerations	Tolerations for Proxy pods assignment	[]
proxy.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
proxy.priorityClassName	Proxy pods’ priorityClassName	""
proxy.schedulerName	Kubernetes pod scheduler registry	""
proxy.updateStrategy.type	Proxy statefulset strategy type	RollingUpdate
proxy.updateStrategy.rollingUpdate	Proxy statefulset rolling update configuration parameters	{}
proxy.extraVolumes	Optionally specify extra list of additional volumes for the Proxy pod(s)	[]
proxy.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Proxy container(s)	[]
proxy.sidecars	Add additional sidecar containers to the Proxy pod(s)	[]
proxy.enableDefaultInitContainers	Deploy default init containers	true
proxy.initContainers	Add additional init containers to the Proxy pod(s)	[]
proxy.serviceAccount.create	Enable creation of ServiceAccount for Proxy pods	true
proxy.serviceAccount.name	The name of the ServiceAccount to use	""
proxy.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
proxy.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
proxy.pdb.create	Enable/disable a Pod Disruption Budget creation	true
proxy.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
proxy.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both proxy.pdb.minAvailable and proxy.pdb.maxUnavailable are empty.	{}

Proxy Autoscaling configuration

Name	Description	Value
proxy.autoscaling.vpa.enabled	Enable VPA	false
proxy.autoscaling.vpa.annotations	Annotations for VPA resource	{}
proxy.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
proxy.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
proxy.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
proxy.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
proxy.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
proxy.autoscaling.hpa.annotations	Annotations for HPA resource	{}
proxy.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
proxy.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
proxy.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
proxy.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Proxy Traffic Exposure Parameters

Name	Description	Value
proxy.service.type	Proxy service type	LoadBalancer
proxy.service.ports.grpc	Proxy GRPC service port	19530
proxy.service.ports.metrics	Proxy Metrics service port	9091
proxy.service.nodePorts.grpc	Node port for GRPC	""
proxy.service.nodePorts.metrics	Node port for Metrics	""
proxy.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
proxy.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
proxy.service.clusterIP	Proxy service Cluster IP	""
proxy.service.loadBalancerIP	Proxy service Load Balancer IP	""
proxy.service.loadBalancerSourceRanges	Proxy service Load Balancer sources	[]
proxy.service.externalTrafficPolicy	Proxy service external traffic policy	Cluster
proxy.service.annotations	Additional custom annotations for Proxy service	{}
proxy.service.extraPorts	Extra ports to expose in the Proxy service	[]
proxy.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
proxy.networkPolicy.allowExternal	The Policy model to apply	true
proxy.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
proxy.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
proxy.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
proxy.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
proxy.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Proxy Metrics Parameters

Name	Description	Value
proxy.metrics.enabled	Enable metrics	false
proxy.metrics.annotations	Annotations for the server service in order to scrape metrics	{}
proxy.metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
proxy.metrics.serviceMonitor.annotations	Annotations for the ServiceMonitor Resource	""
proxy.metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
proxy.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
proxy.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
proxy.metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
proxy.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
proxy.metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
proxy.metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
proxy.metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
proxy.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""

Attu Deployment Parameters

Name	Description	Value
attu.enabled	Enable Attu deployment	true
attu.image.registry	Attu image registry	REGISTRY_NAME
attu.image.repository	Attu image repository	REPOSITORY_NAME/attu
attu.image.digest	Attu image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
attu.image.pullPolicy	Attu image pull policy	IfNotPresent
attu.image.pullSecrets	Attu image pull secrets	[]
attu.image.debug	Enable debug mode	false
attu.extraEnvVars	Array with extra environment variables to add to attu nodes	[]
attu.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for attu nodes	""
attu.extraEnvVarsSecret	Name of existing Secret containing extra env vars for attu nodes	""
attu.command	Override default container command (useful when using custom images)	[]
attu.args	Override default container args (useful when using custom images)	[]
attu.replicaCount	Number of Attu replicas to deploy	1
attu.containerPorts.http	HTTP port for Attu	3000
attu.livenessProbe.enabled	Enable livenessProbe on Attu nodes	true
attu.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
attu.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
attu.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
attu.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
attu.livenessProbe.successThreshold	Success threshold for livenessProbe	1
attu.readinessProbe.enabled	Enable readinessProbe on Attu nodes	true
attu.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
attu.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
attu.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
attu.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
attu.readinessProbe.successThreshold	Success threshold for readinessProbe	1
attu.startupProbe.enabled	Enable startupProbe on Attu containers	false
attu.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
attu.startupProbe.periodSeconds	Period seconds for startupProbe	10
attu.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
attu.startupProbe.failureThreshold	Failure threshold for startupProbe	5
attu.startupProbe.successThreshold	Success threshold for startupProbe	1
attu.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
attu.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
attu.customStartupProbe	Custom startupProbe that overrides the default one	{}
attu.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if attu.resources is set (attu.resources is recommended for production).	micro
attu.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
attu.podSecurityContext.enabled	Enabled Attu pods’ Security Context	true
attu.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
attu.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
attu.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
attu.podSecurityContext.fsGroup	Set Attu pod’s Security Context fsGroup	1001
attu.containerSecurityContext.enabled	Enabled containers’ Security Context	true
attu.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
attu.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
attu.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
attu.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
attu.containerSecurityContext.privileged	Set container’s Security Context privileged	false
attu.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
attu.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
attu.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
attu.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
attu.lifecycleHooks	for the attu container(s) to automate configuration before or after startup	{}
attu.runtimeClassName	Name of the runtime class to be used by pod(s)	""
attu.automountServiceAccountToken	Mount Service Account token in pod	false
attu.hostAliases	attu pods host aliases	[]
attu.podLabels	Extra labels for attu pods	{}
attu.podAnnotations	Annotations for attu pods	{}
attu.podAffinityPreset	Pod affinity preset. Ignored if attu.affinity is set. Allowed values: soft or hard	""
attu.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if attu.affinity is set. Allowed values: soft or hard	soft
attu.nodeAffinityPreset.type	Node affinity preset type. Ignored if attu.affinity is set. Allowed values: soft or hard	""
attu.nodeAffinityPreset.key	Node label key to match. Ignored if attu.affinity is set	""
attu.nodeAffinityPreset.values	Node label values to match. Ignored if attu.affinity is set	[]
attu.affinity	Affinity for Attu pods assignment	{}
attu.nodeSelector	Node labels for Attu pods assignment	{}
attu.tolerations	Tolerations for Attu pods assignment	[]
attu.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains	[]
attu.priorityClassName	Attu pods’ priorityClassName	""
attu.schedulerName	Kubernetes pod scheduler registry	""
attu.updateStrategy.type	Attu statefulset strategy type	RollingUpdate
attu.updateStrategy.rollingUpdate	Attu statefulset rolling update configuration parameters	{}
attu.extraVolumes	Optionally specify extra list of additional volumes for the Attu pod(s)	[]
attu.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Attu container(s)	[]
attu.sidecars	Add additional sidecar containers to the Attu pod(s)	[]
attu.enableDefaultInitContainers	Deploy default init containers	true
attu.initContainers	Add additional init containers to the Attu pod(s)	[]
attu.serviceAccount.create	Enable creation of ServiceAccount for Attu pods	true
attu.serviceAccount.name	The name of the ServiceAccount to use	""
attu.serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
attu.serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
attu.pdb.create	Enable/disable a Pod Disruption Budget creation	true
attu.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	{}
attu.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both attu.pdb.minAvailable and attu.pdb.maxUnavailable are empty.	{}

Attu Autoscaling configuration

Name	Description	Value
attu.autoscaling.vpa.enabled	Enable VPA	false
attu.autoscaling.vpa.annotations	Annotations for VPA resource	{}
attu.autoscaling.vpa.controlledResources	VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory	[]
attu.autoscaling.vpa.maxAllowed	VPA Max allowed resources for the pod	{}
attu.autoscaling.vpa.minAllowed	VPA Min allowed resources for the pod	{}
attu.autoscaling.vpa.updatePolicy.updateMode	Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod	Auto
attu.autoscaling.hpa.enabled	Enable HPA for Milvus Data Plane	false
attu.autoscaling.hpa.annotations	Annotations for HPA resource	{}
attu.autoscaling.hpa.minReplicas	Minimum number of Milvus Data Plane replicas	""
attu.autoscaling.hpa.maxReplicas	Maximum number of Milvus Data Plane replicas	""
attu.autoscaling.hpa.targetCPU	Target CPU utilization percentage	""
attu.autoscaling.hpa.targetMemory	Target Memory utilization percentage	""

Attu Traffic Exposure Parameters

Name	Description	Value
attu.service.type	Attu service type	LoadBalancer
attu.service.ports.http	Attu HTTP service port	80
attu.service.nodePorts.http	Node port for HTTP	""
attu.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
attu.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
attu.service.clusterIP	Attu service Cluster IP	""
attu.service.loadBalancerIP	Attu service Load Balancer IP	""
attu.service.loadBalancerSourceRanges	Attu service Load Balancer sources	[]
attu.service.externalTrafficPolicy	Attu service external traffic policy	Cluster
attu.service.annotations	Additional custom annotations for Attu service	{}
attu.service.extraPorts	Extra ports to expose in the Attu service	[]
attu.ingress.enabled	Enable ingress record generation for Milvus	false
attu.ingress.pathType	Ingress path type	ImplementationSpecific
attu.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
attu.ingress.hostname	Default host for the ingress record	milvus.local
attu.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
attu.ingress.path	Default path for the ingress record	/
attu.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
attu.ingress.tls	Enable TLS configuration for the host defined at attu.ingress.hostname parameter	false
attu.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
attu.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
attu.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
attu.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
attu.ingress.secrets	Custom TLS certificates as secrets	[]
attu.ingress.extraRules	Additional rules to be covered with this ingress record	[]
attu.networkPolicy.enabled	Enable creation of NetworkPolicy resources	true
attu.networkPolicy.allowExternal	The Policy model to apply	true
attu.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
attu.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
attu.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
attu.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
attu.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Init Container Parameters

Name	Description	Value
waitContainer.image.registry	Init container wait-container image registry	REGISTRY_NAME
waitContainer.image.repository	Init container wait-container image name	REPOSITORY_NAME/os-shell
waitContainer.image.digest	Init container wait-container image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
waitContainer.image.pullPolicy	Init container wait-container image pull policy	IfNotPresent
waitContainer.image.pullSecrets	Specify docker-registry secret names as an array	[]
waitContainer.containerSecurityContext.enabled	Enabled containers’ Security Context	true
waitContainer.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
waitContainer.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
waitContainer.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
waitContainer.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
waitContainer.containerSecurityContext.privileged	Set container’s Security Context privileged	false
waitContainer.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
waitContainer.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
waitContainer.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
waitContainer.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
waitContainer.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if initJob.resources is set (initJob.resources is recommended for production).	micro
waitContainer.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

External etcd settings

Name	Description	Value
externalEtcd.servers	List of hostnames of the external etcd	[]
externalEtcd.port	Port of the external etcd instance	2379
externalEtcd.user	User of the external etcd instance	root
externalEtcd.password	Password of the external etcd instance	""
externalEtcd.existingSecret	Name of a secret containing the external etcd password	""
externalEtcd.existingSecretPasswordKey	Key inside the secret containing the external etcd password	etcd-root-password
externalEtcd.tls.enabled	Enable TLS for etcd client connections.	false
externalEtcd.tls.existingSecret	Name of the existing secret containing the TLS certificates for external etcd client communications.	""
externalEtcd.tls.cert	The secret key from the existingSecret if ‘cert’ key different from the default (tls.crt)	tls.crt
externalEtcd.tls.key	The secret key from the existingSecret if ‘key’ key different from the default (tls.key)	tls.key
externalEtcd.tls.caCert	The secret key from the existingSecret if ‘caCert’ key different from the default (ca.crt)	ca.crt
externalEtcd.tls.keyPassword	Password to access the password-protected PEM key if necessary.	""

External S3 parameters

Name	Description	Value
externalS3.host	External S3 host	""
externalS3.port	External S3 port number	443
externalS3.accessKeyID	External S3 access key ID	""
externalS3.accessKeySecret	External S3 access key secret	""
externalS3.existingSecret	Name of an existing secret resource containing the S3 credentials	""
externalS3.existingSecretAccessKeyIDKey	Name of an existing secret key containing the S3 access key ID	root-user
externalS3.existingSecretKeySecretKey	Name of an existing secret key containing the S3 access key secret	root-password
externalS3.bucket	External S3 bucket	milvus
externalS3.rootPath	External S3 root path	file
externalS3.iamEndpoint	External S3 IAM endpoint	""
externalS3.cloudProvider	External S3 cloud provider	""
externalS3.tls.enabled	Enable TLS for externalS3 client connections.	false
externalS3.tls.existingSecret	Name of the existing secret containing the TLS certificates for externalS3 client communications.	""
externalS3.tls.caCert	The secret key from the existingSecret if ‘caCert’ key different from the default (ca.crt)	ca.crt

External Kafka parameters

Name	Description	Value
externalKafka.servers	External Kafka brokers	["localhost"]
externalKafka.port	External Kafka port	9092
externalKafka.listener.protocol	Kafka listener protocol. Allowed protocols: PLAINTEXT, SASL_PLAINTEXT, SASL_SSL and SSL	PLAINTEXT
externalKafka.sasl.user	User for SASL authentication	user
externalKafka.sasl.password	Password for SASL authentication	""
externalKafka.sasl.existingSecret	Name of the existing secret containing a password for SASL authentication (under the key named “client-passwords”)	""
externalKafka.sasl.existingSecretPasswordKey	Name of the secret key containing the Kafka client user password	kafka-root-password
externalKafka.sasl.enabledMechanisms	Kafka enabled SASL mechanisms	PLAIN
externalKafka.tls.enabled	Enable TLS for kafka client connections.	false
externalKafka.tls.existingSecret	Name of the existing secret containing the TLS certificates for external kafka client communications.	""
externalKafka.tls.cert	The secret key from the existingSecret if ‘cert’ key different from the default (tls.crt)	tls.crt
externalKafka.tls.key	The secret key from the existingSecret if ‘key’ key different from the default (tls.key)	tls.key
externalKafka.tls.caCert	The secret key from the existingSecret if ‘caCert’ key different from the default (ca.crt)	ca.crt
externalKafka.tls.keyPassword	Password to access the password-protected PEM key if necessary.	""

etcd sub-chart parameters

Name	Description	Value
etcd.enabled	Deploy etcd sub-chart	true
etcd.replicaCount	Number of etcd replicas	3
etcd.containerPorts.client	Container port for etcd	2379
etcd.auth.rbac.create	Switch to enable RBAC authentication	false
etcd.auth.client.secureTransport	use TLS for client-to-server communications	false

MinIO® chart parameters

Name	Description	Value
minio	For full list of MinIO® values configurations please refere here
minio.enabled	Enable/disable MinIO® chart installation	true
minio.auth.rootUser	MinIO® root username	admin
minio.auth.rootPassword	Password for MinIO® root user	""
minio.auth.existingSecret	Name of an existing secret containing the MinIO® credentials	""
minio.defaultBuckets	Comma, semi-colon or space separated list of MinIO® buckets to create	milvus
minio.provisioning.enabled	Enable/disable MinIO® provisioning job	true
minio.provisioning.extraCommands	Extra commands to run on MinIO® provisioning job	["mc anonymous set download provisioning/milvus"]
minio.tls.enabled	Enable/disable MinIO® TLS support	false
minio.service.type	MinIO® service type	ClusterIP
minio.service.loadBalancerIP	MinIO® service LoadBalancer IP	""
minio.service.ports.api	MinIO® service port	80

kafka sub-chart paramaters

Name	Description	Value
kafka.enabled	Enable/disable Kafka chart installation	true
kafka.controller.replicaCount	Number of Kafka controller eligible (controller+broker) nodes	1
kafka.service.ports.client	Kafka svc port for client connections	9092
kafka.extraConfig	Additional configuration to be appended at the end of the generated Kafka configuration file.	offsets.topic.replication.factor=1
kafka.listeners.client.protocol	Kafka authentication protocol for the client listener	SASL_PLAINTEXT
kafka.sasl.enabledMechanisms	Kafka enabled SASL mechanisms	PLAIN
kafka.sasl.client.users	Kafka client users	["user"]

See https://github.com/bitnami/readme-generator-for-helm to create the table.

The above parameters map to the env variables defined in bitnami/milvus. For more information please refer to the bitnami/milvus image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set loki.traces.jaeger.grpc=true \
  oci://REGISTRY_NAME/REPOSITORY_NAME/milvus

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command enables the Jaeger GRPC traces.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/milvus

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 8.0.0

This major updates the Kafka subchart to its newest major, 29.0.0. For more information on this subchart’s major, please refer to Kafka upgrade notes.

To 7.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 6.0.0

This major release bumps the MinIO chart version to 13.x.x; no major issues are expected during the upgrade.

To 4.0.0

This major updates the Kafka subchart to its newest major, 26.0.0. For more information on this subchart’s major, please refer to Kafka upgrade notes.

To 3.0.0

This major updates the Kafka subchart to its newest major, 25.0.0. For more information on this subchart’s major, please refer to Kafka upgrade notes.

To 2.0.0

This major updates the Kafka subchart to its newest major, 24.0.0. This new version refactors the Kafka chart architecture and requires manual actions during the upgrade. For more information on this subchart’s major, please refer to Kafka upgrade notes.

Additionally, the following values have been modified:

• externalKafka.securityProtocol has been replaced with externalKafka.listener.protocol, which now allows Kafka security protocols ‘PLAINTEXT’,‘SASL_PLAINTEXT’, ‘SSL’, ‘SASL_SSL’.
• externalKafka.user has been replaced with externalAccess.sasl.user.
• externalKafka.password has been replaced with externalAccess.sasl.password.
• externalKafka.existingSecret has been replaced with externalAccess.sasl.existingSecret.
• externalKafka.existingSecretPasswordKey has been replaced with externalAccess.sasl.existingSecretPasswordKey.
• externalKafka.saslMechanisms has been replaced with externalAccess.sasl.enabledMechanisms.

To 1.0.0

This major updates the Kafka subchart to its newest major, 23.0.0. For more information on this subchart’s major, please refer to Kafka upgrade notes.

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.