MongoDB(R) Sharded packaged by Bitnami

MongoDB(R) is an open source NoSQL database that uses JSON for data storage. MongoDB(TM) Sharded improves scalability and reliability for large datasets by distributing data across multiple machines.

Overview of MongoDB® Sharded

Disclaimer: The respective trademarks mentioned in the offering are owned by the respective companies. We do not provide a commercial license for any of these products. This listing has an open-source license. MongoDB(R) is run and maintained by MongoDB, which is a completely separate project from Bitnami.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/mongodb-sharded

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a MongoDB(®) Sharded deployment on a Kubernetes cluster using the Helm package manager.

Classified as a NoSQL database, MongoDB® eschews the traditional table-based relational database structure in favor of JSON-like documents with dynamic schemas, making the integration of data in certain types of applications easier and faster.

This chart uses the sharding method for distributing data across multiple machines. This is meant for deployments with very large data sets and high throughput operations.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/mongodb-sharded

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys MongoDB® on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Change MongoDB® version

To modify the MongoDB® version used in this chart you can specify a valid image tag using the image.tag parameter. For example, image.tag=X.Y.Z. This approach is also applicable to other images like exporters.

Sharding

This chart deploys a sharded cluster by default. Some characteristics of this chart are:

• It allows HA by enabling replication on the shards and the config servers. The mongos instances can be scaled horizontally as well.
• The number of secondary and arbiter nodes can be scaled out independently.

Initialize a fresh instance

The Bitnami MongoDB® image allows you to use your custom scripts to initialize a fresh instance. You can create a custom config map and give it via initScriptsCM(check options for more details).

The allowed extensions are .sh, and .js.

Sidecars and Init Containers

If you have a need for additional containers to run within the same pod as Kibana (e.g. an additional metrics or logging exporter), you can do so via the sidecars config parameter (available in the mongos, shardsvr.dataNode, shardsvr.arbiter, configsvr and common sections). Simply define your container according to the Kubernetes container spec.

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

Similarly, you can add extra init containers using the initContainers parameter.

initContainers:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

Adding extra environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars (available in the mongos, shardsvr.dataNode, shardsvr.arbiter, configsvr and common sections) property.

extraEnvVars:
  - name: MONGODB_VERSION
    value: 4.0

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Using an external config server

It is possible to not deploy any shards or a config server. For example, it is possible to simply deploy mongos instances that point to an external MongoDB® sharded database. If that is the case, set the configsvr.external.host and configsvr.external.replicasetName for the mongos instances to connect. For authentication, set the configsvr.external.rootPassword and configsvr.external.replicasetKey values.

Setting Pod’s affinity

This chart allows you to set your custom affinity using the XXX.affinity parameter(s). Find more information about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami MongoDB® image stores the MongoDB® data and configurations at the /bitnami/mongodb path of the container.

The chart mounts a Persistent Volume at this location. The volume is created using dynamic volume provisioning.

Adjust permissions of persistent volume mountpoint

As the image run as non-root by default, it is necessary to adjust the ownership of the persistent volume so that the container can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volume. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volume before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Adding extra volumes

The Bitnami Kibana chart supports mounting extra volumes (either PVCs, secrets or configmaps) by using the extraVolumes and extraVolumeMounts properties (available in the mongos, shardsvr.dataNode, shardsvr.arbiter, configsvr and common sections). This can be combined with advanced operations like adding extra init containers and sidecars.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.storageClass	DEPRECATED: use global.defaultStorageClass instead	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.name	""
fullnameOverride	String to fully override common.names.fullname	""
namespaceOverride	String to fully override common.names.namespace	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployment	["sleep"]
diagnosticMode.args	Args to override all containers in the deployment	["infinity"]

MongoDB(®) Sharded parameters

Name	Description	Value
image.registry	MongoDB(®) Sharded image registry	REGISTRY_NAME
image.repository	MongoDB(®) Sharded Image name	REPOSITORY_NAME/mongodb-sharded
image.digest	MongoDB(®) Sharded image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	MongoDB(®) Sharded image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]
image.debug	Specify if debug logs should be enabled	false
auth.enabled	Enable authentication	true
auth.rootUser	MongoDB(®) root user	root
auth.rootPassword	MongoDB(®) root password	""
auth.replicaSetKey	Key used for authentication in the replicaset	""
auth.existingSecret	Existing secret with MongoDB(®) credentials (keys: mongodb-password, mongodb-root-password, mongodb-replica-set-key)	""
auth.usePasswordFile	Mount credentials as files instead of using environment variables	false
shards	Number of shards to be created	2
common.mongodbEnableNumactl	Enable launch MongoDB instance prefixed with “numactl –interleave=all”	false
common.useHostnames	Enable DNS hostnames in the replica set config	true
common.mongodbEnableIPv6	Switch to enable/disable IPv6 on MongoDB®	false
common.mongodbDirectoryPerDB	Switch to enable/disable DirectoryPerDB on MongoDB®	false
common.mongodbSystemLogVerbosity	MongoDB® system log verbosity level	0
common.mongodbDisableSystemLog	Whether to disable MongoDB® system log or not	false
common.mongodbInitRetryAttempts	Maximum retries for checking the MongoDB® initialization status	24
common.mongodbInitRetryDelay	Time (in seconds) to wait between retries for checking the MongoDB® initialization status	5
common.initScriptsCM	Configmap with init scripts to execute	""
common.initScriptsSecret	Secret with init scripts to execute (for sensitive data)	""
common.extraEnvVars	An array to add extra env vars	[]
common.extraEnvVarsCM	Name of a ConfigMap containing extra env vars	""
common.extraEnvVarsSecret	Name of a Secret containing extra env vars	""
common.sidecars	Add sidecars to the pod	[]
common.initContainers	Add init containers to the pod	[]
common.podAnnotations	Additional pod annotations	{}
common.podLabels	Additional pod labels	{}
common.extraVolumes	Array to add extra volumes	[]
common.extraVolumeMounts	Array to add extra mounts (normally used with extraVolumes)	[]
common.containerPorts.mongodb	MongoDB container port	27017
common.serviceAccount.create	Whether to create a Service Account for all pods automatically	true
common.serviceAccount.name	Name of a Service Account to be used by all Pods	""
common.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
common.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
volumePermissions.enabled	Enable init container that changes volume permissions in the data directory (for cases where the default k8s runAsUser and fsUser values do not work)	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image name	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Init container volume-permissions image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
service.name	Specify an explicit service name	""
service.annotations	Additional service annotations (evaluate as a template)	{}
service.type	Service type	ClusterIP
service.externalTrafficPolicy	External traffic policy	Cluster
service.ports.mongodb	MongoDB® service port	27017
service.clusterIP	Static clusterIP or None for headless services	""
service.nodePorts.mongodb	Specify the nodePort value for the LoadBalancer and NodePort service types.	""
service.externalIPs	External IP list to use with ClusterIP service type	[]
service.loadBalancerIP	Static IP Address to use for LoadBalancer service type	""
service.loadBalancerSourceRanges	List of IP ranges allowed access to load balancer (if supported)	[]
service.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
service.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
service.headless.annotations	Annotations for the headless service.	{}
networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
networkPolicy.allowExternal	Don’t require server label for connections	true
networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Config Server parameters

Name	Description	Value
configsvr.replicaCount	Number of nodes in the replica set (the first node will be primary)	1
configsvr.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if configsvr.resources is set (configsvr.resources is recommended for production).	small
configsvr.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
configsvr.automountServiceAccountToken	Mount Service Account token in pod	false
configsvr.hostAliases	Deployment pod host aliases	[]
configsvr.mongodbExtraFlags	MongoDB® additional command line flags	[]
configsvr.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
configsvr.priorityClassName	Pod priority class name	""
configsvr.podAffinityPreset	Config Server Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
configsvr.podAntiAffinityPreset	Config Server Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
configsvr.nodeAffinityPreset.type	Config Server Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
configsvr.nodeAffinityPreset.key	Config Server Node label key to match Ignored if affinity is set.	""
configsvr.nodeAffinityPreset.values	Config Server Node label values to match. Ignored if affinity is set.	[]
configsvr.affinity	Config Server Affinity for pod assignment	{}
configsvr.nodeSelector	Config Server Node labels for pod assignment	{}
configsvr.tolerations	Config Server Tolerations for pod assignment	[]
configsvr.podManagementPolicy	Statefulset’s pod management policy, allows parallel startup of pods	OrderedReady
configsvr.updateStrategy.type	updateStrategy for MongoDB® Primary, Secondary and Arbiter statefulsets	RollingUpdate
configsvr.config	MongoDB® configuration file	""
configsvr.configCM	ConfigMap name with Config Server configuration file (cannot be used with configsvr.config)	""
configsvr.extraEnvVars	An array to add extra env vars	[]
configsvr.extraEnvVarsCM	Name of a ConfigMap containing extra env vars	""
configsvr.extraEnvVarsSecret	Name of a Secret containing extra env vars	""
configsvr.sidecars	Add sidecars to the pod	[]
configsvr.initContainers	Add init containers to the pod	[]
configsvr.podAnnotations	Additional pod annotations	{}
configsvr.podLabels	Additional pod labels	{}
configsvr.extraVolumes	Array to add extra volumes. Requires setting extraVolumeMounts	[]
configsvr.extraVolumeMounts	Array to add extra mounts (normally used with extraVolumes). Normally used with extraVolumes	[]
configsvr.schedulerName	Use an alternate scheduler, e.g. “stork”.	""
configsvr.pdb.create	Enable pod disruption budget	true
configsvr.pdb.minAvailable	Minimum number of available config pods allowed (0 to disable)	0
configsvr.pdb.maxUnavailable	Maximum number of unavailable config pods allowed (0 to disable)	1
configsvr.persistence.enabled	Use a PVC to persist data	true
configsvr.persistence.mountPath	Path to mount the volume at	/bitnami/mongodb
configsvr.persistence.subPath	Subdirectory of the volume to mount at (evaluated as a template)	""
configsvr.persistence.storageClass	Storage class of backing PVC	""
configsvr.persistence.accessModes	Use volume as ReadOnly or ReadWrite	["ReadWriteOnce"]
configsvr.persistence.size	PersistentVolumeClaim size	8Gi
configsvr.persistence.annotations	Persistent Volume annotations	{}
configsvr.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Config Server StatefulSet	false
configsvr.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
configsvr.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain
configsvr.serviceAccount.create	Specifies whether a ServiceAccount should be created for Config Server	true
configsvr.serviceAccount.name	Name of a Service Account to be used by Config Server	""
configsvr.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
configsvr.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
configsvr.external.host	Primary node of an external Config Server replicaset	""
configsvr.external.rootPassword	Root password of the external Config Server replicaset	""
configsvr.external.replicasetName	Replicaset name of an external Config Server	""
configsvr.external.replicasetKey	Replicaset key of an external Config Server	""
configsvr.podSecurityContext.enabled	Enable security context	true
configsvr.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
configsvr.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
configsvr.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
configsvr.podSecurityContext.fsGroup	Group ID for the container	1001
configsvr.containerSecurityContext.enabled	Enabled containers’ Security Context	true
configsvr.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
configsvr.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
configsvr.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
configsvr.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
configsvr.containerSecurityContext.privileged	Set container’s Security Context privileged	false
configsvr.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
configsvr.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
configsvr.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
configsvr.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
configsvr.command	Override default container command (useful when using custom images)	["/bin/bash","/entrypoint/replicaset-entrypoint.sh"]
configsvr.args	Override default container args (useful when using custom images)	[]
configsvr.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
configsvr.lifecycleHooks	for the Config Server container(s) to automate configuration before or after startup	{}
configsvr.livenessProbe.enabled	Enable livenessProbe	true
configsvr.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	60
configsvr.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
configsvr.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	20
configsvr.livenessProbe.failureThreshold	Failure threshold for livenessProbe	2
configsvr.livenessProbe.successThreshold	Success threshold for livenessProbe	1
configsvr.readinessProbe.enabled	Enable readinessProbe	true
configsvr.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
configsvr.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
configsvr.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	20
configsvr.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
configsvr.readinessProbe.successThreshold	Success threshold for readinessProbe	1
configsvr.startupProbe.enabled	Enable startupProbe	true
configsvr.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
configsvr.startupProbe.periodSeconds	Period seconds for startupProbe	10
configsvr.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
configsvr.startupProbe.failureThreshold	Failure threshold for startupProbe	30
configsvr.startupProbe.successThreshold	Success threshold for startupProbe	1
configsvr.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
configsvr.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
configsvr.customStartupProbe	Custom startupProbe that overrides the default one	{}

Mongos parameters

Name	Description	Value
mongos.replicaCount	Number of replicas	1
mongos.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if mongos.resources is set (mongos.resources is recommended for production).	small
mongos.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
mongos.automountServiceAccountToken	Mount Service Account token in pod	false
mongos.hostAliases	Deployment pod host aliases	[]
mongos.mongodbExtraFlags	MongoDB® additional command line flags	[]
mongos.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
mongos.priorityClassName	Pod priority class name	""
mongos.podAffinityPreset	Mongos Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
mongos.podAntiAffinityPreset	Mongos Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
mongos.nodeAffinityPreset.type	Mongos Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
mongos.nodeAffinityPreset.key	Mongos Node label key to match Ignored if affinity is set.	""
mongos.nodeAffinityPreset.values	Mongos Node label values to match. Ignored if affinity is set.	[]
mongos.affinity	Mongos Affinity for pod assignment	{}
mongos.nodeSelector	Mongos Node labels for pod assignment	{}
mongos.tolerations	Mongos Tolerations for pod assignment	[]
mongos.podManagementPolicy	Statefulsets pod management policy, allows parallel startup of pods	OrderedReady
mongos.updateStrategy.type	updateStrategy for MongoDB® Primary, Secondary and Arbiter statefulsets	RollingUpdate
mongos.config	MongoDB® configuration file	""
mongos.configCM	ConfigMap name with MongoDB® configuration file (cannot be used with mongos.config)	""
mongos.extraEnvVars	An array to add extra env vars	[]
mongos.extraEnvVarsCM	Name of a ConfigMap containing extra env vars	""
mongos.extraEnvVarsSecret	Name of a Secret containing extra env vars	""
mongos.sidecars	Add sidecars to the pod	[]
mongos.initContainers	Add init containers to the pod	[]
mongos.podAnnotations	Additional pod annotations	{}
mongos.podLabels	Additional pod labels	{}
mongos.extraVolumes	Array to add extra volumes. Requires setting extraVolumeMounts	[]
mongos.extraVolumeMounts	Array to add extra volume mounts. Normally used with extraVolumes.	[]
mongos.schedulerName	Use an alternate scheduler, e.g. “stork”.	""
mongos.useStatefulSet	Use StatefulSet instead of Deployment	false
mongos.servicePerReplica.enabled	Create one service per mongos replica (must be used with statefulset)	false
mongos.servicePerReplica.annotations	Additional service annotations (evaluate as a template)	{}
mongos.servicePerReplica.type	Service type	ClusterIP
mongos.servicePerReplica.externalTrafficPolicy	External traffic policy	Cluster
mongos.servicePerReplica.port	MongoDB® service port	27017
mongos.servicePerReplica.clusterIPs	Array of static clusterIPs for each MongoDB@reg; replica. Length must be the same as mongos.replicaCount	[]
mongos.servicePerReplica.nodePorts	Array of node ports used for each MongoDB@reg; replica. Length must be the same as mongos.replicaCount	[]
mongos.servicePerReplica.externalIPs	External IP list to use with ClusterIP service type	[]
mongos.servicePerReplica.loadBalancerIPs	Array of static IP Address to use for each replica LoadBalancer service type. Length must be the same as mongos.replicaCount	[]
mongos.servicePerReplica.loadBalancerSourceRanges	List of IP ranges allowed access to load balancer (if supported)	[]
mongos.servicePerReplica.extraPorts	Extra ports to expose (normally used with the sidecar value)	[]
mongos.servicePerReplica.sessionAffinity	Session Affinity for Kubernetes service, can be “None” or “ClientIP”	None
mongos.servicePerReplica.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
mongos.pdb.create	Enable pod disruption budget	true
mongos.pdb.minAvailable	Minimum number of available mongo pods allowed (0 to disable)	0
mongos.pdb.maxUnavailable	Maximum number of unavailable mongo pods allowed (0 to disable)	1
mongos.serviceAccount.create	Whether to create a Service Account for mongos automatically	true
mongos.serviceAccount.name	Name of a Service Account to be used by mongos	""
mongos.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
mongos.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
mongos.podSecurityContext.enabled	Enable security context	true
mongos.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
mongos.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
mongos.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
mongos.podSecurityContext.fsGroup	Group ID for the container	1001
mongos.containerSecurityContext.enabled	Enabled containers’ Security Context	true
mongos.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
mongos.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
mongos.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
mongos.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
mongos.containerSecurityContext.privileged	Set container’s Security Context privileged	false
mongos.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
mongos.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
mongos.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
mongos.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
mongos.command	Override default container command (useful when using custom images)	[]
mongos.args	Override default container args (useful when using custom images)	[]
mongos.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
mongos.lifecycleHooks	for the Mongo container(s) to automate configuration before or after startup	{}
mongos.livenessProbe.enabled	Enable livenessProbe	true
mongos.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	60
mongos.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
mongos.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	20
mongos.livenessProbe.failureThreshold	Failure threshold for livenessProbe	2
mongos.livenessProbe.successThreshold	Success threshold for livenessProbe	1
mongos.readinessProbe.enabled	Enable readinessProbe	true
mongos.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
mongos.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
mongos.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	20
mongos.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
mongos.readinessProbe.successThreshold	Success threshold for readinessProbe	1
mongos.startupProbe.enabled	Enable startupProbe	false
mongos.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
mongos.startupProbe.periodSeconds	Period seconds for startupProbe	10
mongos.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
mongos.startupProbe.failureThreshold	Failure threshold for startupProbe	30
mongos.startupProbe.successThreshold	Success threshold for startupProbe	1
mongos.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
mongos.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
mongos.customStartupProbe	Custom startupProbe that overrides the default one	{}

Shard configuration: Data node parameters

Name	Description	Value
shardsvr.dataNode.replicaCount	Number of nodes in each shard replica set (the first node will be primary)	1
shardsvr.dataNode.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if shardsvr.dataNode.resources is set (shardsvr.dataNode.resources is recommended for production).	medium
shardsvr.dataNode.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
shardsvr.dataNode.mongodbExtraFlags	MongoDB® additional command line flags	[]
shardsvr.dataNode.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
shardsvr.dataNode.priorityClassName	Pod priority class name	""
shardsvr.dataNode.podAffinityPreset	Data nodes Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
shardsvr.dataNode.podAntiAffinityPreset	Data nodes Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
shardsvr.dataNode.nodeAffinityPreset.type	Data nodes Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
shardsvr.dataNode.nodeAffinityPreset.key	Data nodes Node label key to match Ignored if affinity is set.	""
shardsvr.dataNode.nodeAffinityPreset.values	Data nodes Node label values to match. Ignored if affinity is set.	[]
shardsvr.dataNode.affinity	Data nodes Affinity for pod assignment	{}
shardsvr.dataNode.nodeSelector	Data nodes Node labels for pod assignment	{}
shardsvr.dataNode.tolerations	Data nodes Tolerations for pod assignment	[]
shardsvr.dataNode.podManagementPolicy	podManagementPolicy for the statefulset, allows parallel startup of pods	OrderedReady
shardsvr.dataNode.updateStrategy.type	updateStrategy for MongoDB® Primary, Secondary and Arbiter statefulsets	RollingUpdate
shardsvr.dataNode.automountServiceAccountToken	Mount Service Account token in pod	false
shardsvr.dataNode.hostAliases	Deployment pod host aliases	[]
shardsvr.dataNode.config	Entries for the MongoDB® config file	""
shardsvr.dataNode.configCM	ConfigMap name with MongoDB® configuration (cannot be used with shardsvr.dataNode.config)	""
shardsvr.dataNode.extraEnvVars	An array to add extra env vars	[]
shardsvr.dataNode.extraEnvVarsCM	Name of a ConfigMap containing extra env vars	""
shardsvr.dataNode.extraEnvVarsSecret	Name of a Secret containing extra env vars	""
shardsvr.dataNode.sidecars	Attach additional containers (evaluated as a template)	[]
shardsvr.dataNode.initContainers	Add init containers to the pod	[]
shardsvr.dataNode.podAnnotations	Additional pod annotations	{}
shardsvr.dataNode.podLabels	Additional pod labels	{}
shardsvr.dataNode.extraVolumes	Array to add extra volumes. Requires setting extraVolumeMounts	[]
shardsvr.dataNode.extraVolumeMounts	Array to add extra mounts. Normally used with extraVolumes	[]
shardsvr.dataNode.schedulerName	Use an alternate scheduler, e.g. “stork”.	""
shardsvr.dataNode.pdb.create	Enable pod disruption budget	true
shardsvr.dataNode.pdb.minAvailable	Minimum number of available data pods allowed (0 to disable)	0
shardsvr.dataNode.pdb.maxUnavailable	Maximum number of unavailable data pods allowed (0 to disable)	1
shardsvr.dataNode.serviceAccount.create	Specifies whether a ServiceAccount should be created for shardsvr	true
shardsvr.dataNode.serviceAccount.name	Name of a Service Account to be used by shardsvr data pods	""
shardsvr.dataNode.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
shardsvr.dataNode.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
shardsvr.dataNode.podSecurityContext.enabled	Enable security context	true
shardsvr.dataNode.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
shardsvr.dataNode.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
shardsvr.dataNode.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
shardsvr.dataNode.podSecurityContext.fsGroup	Group ID for the container	1001
shardsvr.dataNode.containerSecurityContext.enabled	Enabled containers’ Security Context	true
shardsvr.dataNode.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
shardsvr.dataNode.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
shardsvr.dataNode.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
shardsvr.dataNode.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
shardsvr.dataNode.containerSecurityContext.privileged	Set container’s Security Context privileged	false
shardsvr.dataNode.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
shardsvr.dataNode.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
shardsvr.dataNode.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
shardsvr.dataNode.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
shardsvr.dataNode.command	Override default container command (useful when using custom images)	["/bin/bash","/entrypoint/replicaset-entrypoint.sh"]
shardsvr.dataNode.args	Override default container args (useful when using custom images)	[]
shardsvr.dataNode.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
shardsvr.dataNode.lifecycleHooks	for the Data container(s) to automate configuration before or after startup	{}
shardsvr.dataNode.livenessProbe.enabled	Enable livenessProbe	true
shardsvr.dataNode.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	60
shardsvr.dataNode.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
shardsvr.dataNode.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	20
shardsvr.dataNode.livenessProbe.failureThreshold	Failure threshold for livenessProbe	2
shardsvr.dataNode.livenessProbe.successThreshold	Success threshold for livenessProbe	1
shardsvr.dataNode.readinessProbe.enabled	Enable readinessProbe	true
shardsvr.dataNode.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
shardsvr.dataNode.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
shardsvr.dataNode.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	20
shardsvr.dataNode.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
shardsvr.dataNode.readinessProbe.successThreshold	Success threshold for readinessProbe	1
shardsvr.dataNode.startupProbe.enabled	Enable startupProbe	false
shardsvr.dataNode.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
shardsvr.dataNode.startupProbe.periodSeconds	Period seconds for startupProbe	10
shardsvr.dataNode.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
shardsvr.dataNode.startupProbe.failureThreshold	Failure threshold for startupProbe	30
shardsvr.dataNode.startupProbe.successThreshold	Success threshold for startupProbe	1
shardsvr.dataNode.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
shardsvr.dataNode.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
shardsvr.dataNode.customStartupProbe	Custom startupProbe that overrides the default one	{}

Shard configuration: Persistence parameters

Name	Description	Value
shardsvr.persistence.enabled	Use a PVC to persist data	true
shardsvr.persistence.mountPath	The path the volume will be mounted at, useful when using different MongoDB® images.	/bitnami/mongodb
shardsvr.persistence.subPath	Subdirectory of the volume to mount at (evaluated as a template)	""
shardsvr.persistence.storageClass	Storage class of backing PVC	""
shardsvr.persistence.accessModes	Use volume as ReadOnly or ReadWrite	["ReadWriteOnce"]
shardsvr.persistence.size	PersistentVolumeClaim size	8Gi
shardsvr.persistence.annotations	Additional volume annotations	{}
shardsvr.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Shard replicas StatefulSet	false
shardsvr.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
shardsvr.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain

Shard configuration: Arbiter parameters

Name	Description	Value
shardsvr.arbiter.replicaCount	Number of arbiters in each shard replica set (the first node will be primary)	0
shardsvr.arbiter.automountServiceAccountToken	Mount Service Account token in pod	false
shardsvr.arbiter.hostAliases	Deployment pod host aliases	[]
shardsvr.arbiter.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if shardsvr.arbiter.resources is set (shardsvr.arbiter.resources is recommended for production).	small
shardsvr.arbiter.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
shardsvr.arbiter.mongodbExtraFlags	MongoDB® additional command line flags	[]
shardsvr.arbiter.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
shardsvr.arbiter.priorityClassName	Pod priority class name	""
shardsvr.arbiter.podAffinityPreset	Arbiter’s Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
shardsvr.arbiter.podAntiAffinityPreset	Arbiter’s Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
shardsvr.arbiter.nodeAffinityPreset.type	Arbiter’s Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
shardsvr.arbiter.nodeAffinityPreset.key	Arbiter’s Node label key to match Ignored if affinity is set.	""
shardsvr.arbiter.nodeAffinityPreset.values	Arbiter’s Node label values to match. Ignored if affinity is set.	[]
shardsvr.arbiter.affinity	Arbiter’s Affinity for pod assignment	{}
shardsvr.arbiter.nodeSelector	Arbiter’s Node labels for pod assignment	{}
shardsvr.arbiter.tolerations	Arbiter’s Tolerations for pod assignment	[]
shardsvr.arbiter.podManagementPolicy	Statefulset’s pod management policy, allows parallel startup of pods	OrderedReady
shardsvr.arbiter.updateStrategy.type	updateStrategy for MongoDB® Primary, Secondary and Arbiter statefulsets	RollingUpdate
shardsvr.arbiter.config	MongoDB® configuration file	""
shardsvr.arbiter.configCM	ConfigMap name with MongoDB® configuration file (cannot be used with shardsvr.arbiter.config)	""
shardsvr.arbiter.extraEnvVars	An array to add extra env vars	[]
shardsvr.arbiter.extraEnvVarsCM	Name of a ConfigMap containing extra env vars	""
shardsvr.arbiter.extraEnvVarsSecret	Name of a Secret containing extra env vars	""
shardsvr.arbiter.sidecars	Add sidecars to the pod	[]
shardsvr.arbiter.initContainers	Add init containers to the pod	[]
shardsvr.arbiter.podAnnotations	Additional pod annotations	{}
shardsvr.arbiter.podLabels	Additional pod labels	{}
shardsvr.arbiter.extraVolumes	Array to add extra volumes	[]
shardsvr.arbiter.extraVolumeMounts	Array to add extra mounts (normally used with extraVolumes)	[]
shardsvr.arbiter.schedulerName	Use an alternate scheduler, e.g. “stork”.	""
shardsvr.arbiter.serviceAccount.create	Specifies whether a ServiceAccount should be created for shardsvr arbiter nodes	true
shardsvr.arbiter.serviceAccount.name	Name of a Service Account to be used by shardsvr arbiter pods	""
shardsvr.arbiter.serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
shardsvr.arbiter.serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false
shardsvr.arbiter.podSecurityContext.enabled	Enable security context	true
shardsvr.arbiter.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
shardsvr.arbiter.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
shardsvr.arbiter.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
shardsvr.arbiter.podSecurityContext.fsGroup	Group ID for the container	1001
shardsvr.arbiter.containerSecurityContext.enabled	Enabled containers’ Security Context	true
shardsvr.arbiter.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
shardsvr.arbiter.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
shardsvr.arbiter.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
shardsvr.arbiter.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
shardsvr.arbiter.containerSecurityContext.privileged	Set container’s Security Context privileged	false
shardsvr.arbiter.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
shardsvr.arbiter.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
shardsvr.arbiter.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
shardsvr.arbiter.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
shardsvr.arbiter.command	Override default container command (useful when using custom images)	[]
shardsvr.arbiter.args	Override default container args (useful when using custom images)	[]
shardsvr.arbiter.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
shardsvr.arbiter.lifecycleHooks	for the arbiter container(s) to automate configuration before or after startup	{}
shardsvr.arbiter.livenessProbe.enabled	Enable livenessProbe	true
shardsvr.arbiter.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	60
shardsvr.arbiter.livenessProbe.periodSeconds	Period seconds for livenessProbe	30
shardsvr.arbiter.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	20
shardsvr.arbiter.livenessProbe.failureThreshold	Failure threshold for livenessProbe	2
shardsvr.arbiter.livenessProbe.successThreshold	Success threshold for livenessProbe	1
shardsvr.arbiter.readinessProbe.enabled	Enable readinessProbe	true
shardsvr.arbiter.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	10
shardsvr.arbiter.readinessProbe.periodSeconds	Period seconds for readinessProbe	30
shardsvr.arbiter.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	20
shardsvr.arbiter.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
shardsvr.arbiter.readinessProbe.successThreshold	Success threshold for readinessProbe	1
shardsvr.arbiter.startupProbe.enabled	Enable startupProbe	false
shardsvr.arbiter.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
shardsvr.arbiter.startupProbe.periodSeconds	Period seconds for startupProbe	10
shardsvr.arbiter.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	5
shardsvr.arbiter.startupProbe.failureThreshold	Failure threshold for startupProbe	30
shardsvr.arbiter.startupProbe.successThreshold	Success threshold for startupProbe	1
shardsvr.arbiter.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
shardsvr.arbiter.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
shardsvr.arbiter.customStartupProbe	Custom startupProbe that overrides the default one	{}

Metrics parameters

Name	Description	Value
metrics.enabled	Start a side-car prometheus exporter	false
metrics.image.registry	MongoDB® exporter image registry	REGISTRY_NAME
metrics.image.repository	MongoDB® exporter image name	REPOSITORY_NAME/mongodb-exporter
metrics.image.digest	MongoDB® exporter image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
metrics.image.pullPolicy	MongoDB® exporter image pull policy	Always
metrics.image.pullSecrets	MongoDB® exporter image pull secrets	[]
metrics.useTLS	Whether to connect to MongoDB® with TLS	false
metrics.extraArgs	String with extra arguments to the metrics exporter	""
metrics.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).	nano
metrics.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
metrics.containerSecurityContext.enabled	Enabled containers’ Security Context	true
metrics.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
metrics.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
metrics.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
metrics.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
metrics.containerSecurityContext.privileged	Set container’s Security Context privileged	false
metrics.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
metrics.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
metrics.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
metrics.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
metrics.livenessProbe.enabled	Enable livenessProbe	false
metrics.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	15
metrics.livenessProbe.periodSeconds	Period seconds for livenessProbe	5
metrics.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
metrics.livenessProbe.failureThreshold	Failure threshold for livenessProbe	3
metrics.livenessProbe.successThreshold	Success threshold for livenessProbe	1
metrics.readinessProbe.enabled	Enable readinessProbe	false
metrics.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
metrics.readinessProbe.periodSeconds	Period seconds for readinessProbe	5
metrics.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	1
metrics.readinessProbe.failureThreshold	Failure threshold for readinessProbe	3
metrics.readinessProbe.successThreshold	Success threshold for readinessProbe	1
metrics.startupProbe.enabled	Enable startupProbe	false
metrics.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
metrics.startupProbe.periodSeconds	Period seconds for startupProbe	5
metrics.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	2
metrics.startupProbe.failureThreshold	Failure threshold for startupProbe	15
metrics.startupProbe.successThreshold	Success threshold for startupProbe	1
metrics.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
metrics.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
metrics.customStartupProbe	Custom startupProbe that overrides the default one	{}
metrics.containerPorts.metrics	Port of the Prometheus metrics container	9216
metrics.podAnnotations	Metrics exporter pod Annotation	{}
metrics.podMonitor.enabled	Create PodMonitor Resource for scraping metrics using PrometheusOperator	false
metrics.podMonitor.namespace	Namespace where podmonitor resource should be created	monitoring
metrics.podMonitor.interval	Specify the interval at which metrics should be scraped	30s
metrics.podMonitor.scrapeTimeout	Specify the timeout after which the scrape is ended	""
metrics.podMonitor.additionalLabels	Additional labels that can be used so PodMonitors will be discovered by Prometheus	{}

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set shards=4,configsvr.replicaCount=3,shardsvr.dataNode.replicaCount=2 \
    oci://REGISTRY_NAME/REPOSITORY_NAME/mongodb-sharded

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the number of shards to 4, the number of replicas for the config servers to 3 and number of replicas for data nodes to 2.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/mongodb-sharded

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

If authentication is enabled, it’s necessary to set the auth.rootPassword and auth.replicaSetKey when upgrading for readiness/liveness probes to work properly. When you install this chart for the first time, some notes will be displayed providing the credentials you must use. Please note down the password, and run the command below to upgrade your chart:

helm upgrade my-release oci://REGISTRY_NAME/REPOSITORY_NAME/mongodb-sharded --set auth.rootPassword=[PASSWORD] (--set auth.replicaSetKey=[auth.replicaSetKey])

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Note: you need to substitute the placeholders [PASSWORD] and [auth.replicaSetKey] with the values obtained in the installation notes.

To 8.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 7.0.0

This major version updates the MongoDB® container image version used from 6.0 to 7.0, the new stable version. There are no major changes in the chart, but we recommend checking the MongoDB® 7.0 release notes before upgrading.

Note: Due to an error in our release process, the latest version in the previous major branch (6.6.8) already uses 7.0 by default, see PR#19575

To 5.0.0

This major release renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repository.

Affected values:

• Authentication parameters are reorganized under the auth.* parameter:
  • usePassword is renamed to auth.enabled.
  • mongodbRootPassword, replicaSetKey, existingSecret and usePasswordFile are now auth.rootPassword, auth.replicaSetKey, auth.existingSecret and auth.usePasswordFile respectively.
• common.containerPorts.mongo is renamed to common.containerPorts.mongodb
• pdb.enabled is renamed to pdb.create
• XXX.replicas is renamed to XXX.replicaCount
• service.port is renamed to service.ports.mongodb
• metrics.containerPort is renamed to metrics.containerPorts.metrics
• service.nodePort is renamed to service.nodePorts.mongodb
• securityContext is splitted into podSecurityContext and containerSecurityContext and moved into the different sections (mongos, shardsvr.dataNode, shardsvr.arbiterand configsvr):
  • securityContext.fsGroup is renamed to XXX.podSecurityContext.fsGroup
  • securityContext.runAsUser is renamed to XXX.containerSecurityContext.runAsUser
  • securityContext.runAsNonRoot is renamed to XXX.containerSecurityContext.runAsNonRoot
• redinessProbe, livenessProbe and startupProbe are moved to the different sections (mongos, shardsvr.dataNode, shardsvr.arbiterand configsvr)

To 4.0.0

In this version, the mongodb-exporter bundled as part of this Helm chart was updated to a new version which, even it is not a major change, can contain breaking changes (from 0.11.X to 0.30.X). Please visit the release notes from the upstream project at https://github.com/percona/mongodb_exporter/releases

To 3.1.0

This version introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 3.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn’t face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn’t support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://docs.vmware.com/en/VMware-Tanzu-Application-Catalog/services/tutorials/GUID-resolve-helm2-helm3-post-migration-issues-index.html
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 2.0.0

MongoDB® container images were updated to 4.4.x and it can affect compatibility with older versions of MongoDB®. Refer to the following guide to upgrade your applications:

• Upgrade a Sharded Cluster to 4.4

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.