Bitnami package for SeaweedFS

SeaweedFS is a simple and highly scalable distributed file system.

Overview of SeaweedFS

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/seaweedfs

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

Bitnami charts for Helm are carefully engineered, actively maintained and are the quickest and easiest way to deploy containers on a Kubernetes cluster that are ready to handle production workloads.

This chart bootstraps a SeaweedFS deployment in a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/seaweedfs

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys SeaweedFS on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources values (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

External database support

You may want to have SeaweedFS Filer Server connect to an external database rather than installing one inside your cluster. Typical reasons for this are to use a managed database service, or to share a common database server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalDatabase parameter. You should also disable the MariaDB installation with the mariadb.enabled option. Here is an example:

mariadb.enabled=false
externalDatabase.enabled=true
externalDatabase.store=mariadb
externalDatabase.host=myexternalhost
externalDatabase.user=myuser
externalDatabase.password=mypassword
externalDatabase.database=mydatabase
externalDatabase.port=3306

In addition, the tables must be created in the external database before starting seaweedfs.

For mariadb, the following should be performed (substituting mydatabase as necessary):

USE mydatabase;
CREATE TABLE IF NOT EXISTS `filemeta` (
  `dirhash`   BIGINT NOT NULL       COMMENT 'first 64 bits of MD5 hash value of directory field',
  `name`      VARCHAR(766) NOT NULL COMMENT 'directory or file name',
  `directory` TEXT NOT NULL         COMMENT 'full path to parent directory',
  `meta`      LONGBLOB,
  PRIMARY KEY (`dirhash`, `name`)
) DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin;

For postgresql, the following should be performed (substituting mydatabase as necessary):

\c mydatabase;
CREATE TABLE IF NOT EXISTS filemeta (
  dirhash     BIGINT,
  name        VARCHAR(65535),
  directory   VARCHAR(65535),
  meta        bytea,
  PRIMARY KEY (dirhash, name)
);

Ingress

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.

To enable Ingress integration, set master.ingress.enabled to true. Please other SweaweedFS components can also be exposed via Ingress by setting the corresponding ingress.enabled parameter to true (e.g. s3.ingress.enabled, filer.ingress.enabled, etc).

The most common scenario is to have one host name mapped to the deployment. In this case, the master.ingress.hostname property can be used to set the host name. The master.ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the master.ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The master.ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.

NOTE: For each host specified in the master.ingress.extraHosts parameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers.

Security features

Security enhancements can be enabled by setting security.enabled and security.mTLS.enabled to true. This will enable the following security features:

• JWT-based access control for certain operations.
• Ensure mutual TLS communications between the SeaweedFS components.

You can manually create the required TLS certificates for each SeaweedFS component or relying on the chart auto-generation capabilities. The chart supports two different ways to auto-generate the required certificates:

• Using Helm capabilities. Enable this feature by setting security.mTLS.autoGenerated.enabled to true and security.mTLS.autoGenerated.engine to helm.
• Relying on CertManager (please note it’s required to have CertManager installed in your K8s cluster). Enable this feature by setting security.mTLS.autoGenerated.enabled to true and security.mTLS.autoGenerated.engine to cert-manager. Please note it’s supported to use an existing Issuer/ClusterIssuer for issuing the TLS certificates by setting the security.mTLS.autoGenerated.certManager.existingIssuer and security.mTLS.autoGenerated.certManager.existingIssuerKind parameters.

S3 Authentication

Authentication can be enabled in the SeaweedFS S3 API by setting the s3.auth.enabled parameter to true. You can provide your custom authentication configuration creating a secret with the configuration and setting the s3.auth.cexistingSecret parameter with the name of the secret. Alternatively, you can rely on the chart to create a basic configuration with two main users: admin and read-only. You can provide the admin user credentials using the s3.auth.adminAccessKeyId and s3.auth.adminSecretAccessKey parameters, and the read-only user credentials using the s3.auth.readAccessKeyId and s3.auth.readSecretAccessKey parameters.

Additional environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property.

master:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Sidecars

If additional containers are needed in the same pod as SeaweedFS (such as additional metrics or logging exporters), they can be defined using the sidecars parameter.

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:

service:
  extraPorts:
  - name: extraPort
    port: 11311
    targetPort: 11311

NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the --enable-metrics=true parameter at deployment time. The sidecars parameter should therefore only be used for any extra sidecar containers.

If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Learn more about sidecar containers and init containers.

Pod affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod affinity in the kubernetes documentation.

As an alternative, use one of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

Persistence

The Bitnami SeaweedFS image stores the data and configurations at the /bitnami path of the container. Persistent Volume Claims are used to keep the data across deployments.

If you encounter errors when working with persistent volumes, refer to our troubleshooting guide for persistent volumes.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.storageClass	DEPRECATED: use global.defaultStorageClass instead	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.name	""
fullnameOverride	String to fully override common.names.fullname	""
namespaceOverride	String to fully override common.names.namespace	""
commonLabels	Labels to add to all deployed objects	{}
commonAnnotations	Annotations to add to all deployed objects	{}
clusterDomain	Kubernetes cluster domain name	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the chart release	["sleep"]
diagnosticMode.args	Args to override all containers in the chart release	["infinity"]
image.registry	SeaweedFS image registry	REGISTRY_NAME
image.repository	SeaweedFS image repository	REPOSITORY_NAME/seaweedfs
image.digest	SeaweedFS image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)	""
image.pullPolicy	SeaweedFS image pull policy	IfNotPresent
image.pullSecrets	SeaweedFS image pull secrets	[]
image.debug	Enable SeaweedFS image debug mode	false
security.enabled	Enable Security settings	false
security.corsAllowedOrigins	CORS allowed origins	*
security.jwtSigning.volumeWrite	Enable JWT signing for volume write operations	true
security.jwtSigning.volumeRead	Enable JWT signing for volume read operations	false
security.jwtSigning.filerWrite	Enable JWT signing for filer write operations	false
security.jwtSigning.filerRead	Enable JWT signing for filer read operations	false
security.mTLS.enabled	Enable mTLS for gRPC communications	false
security.mTLS.autoGenerated.enabled	Enable automatic generation of certificates for mTLS	false
security.mTLS.autoGenerated.engine	Mechanism to generate the certificates (allowed values: helm, cert-manager)	helm
security.mTLS.autoGenerated.certManager.existingIssuer	The name of an existing Issuer to use for generating the certificates (only for cert-manager engine)	""
security.mTLS.autoGenerated.certManager.existingIssuerKind	Existing Issuer kind, defaults to Issuer (only for cert-manager engine)	""
security.mTLS.autoGenerated.certManager.keyAlgorithm	Key algorithm for the certificates (only for cert-manager engine)	RSA
security.mTLS.autoGenerated.certManager.keySize	Key size for the certificates (only for cert-manager engine)	2048
security.mTLS.autoGenerated.certManager.duration	Duration for the certificates (only for cert-manager engine)	2160h
security.mTLS.autoGenerated.certManager.renewBefore	Renewal period for the certificates (only for cert-manager engine)	360h
security.mTLS.ca	CA certificate for mTLS. Ignored if security.mTLS.existingCASecret is set	""
security.mTLS.existingCASecret	The name of an existing Secret containing the CA certificate for mTLS	""
security.mTLS.master.cert	Master Server certificate for mTLS. Ignored if security.mTLS.master.existingSecret is set	""
security.mTLS.master.key	Master Server key for mTLS. Ignored if security.mTLS.master.existingSecret is set	""
security.mTLS.master.existingSecret	The name of an existing Secret containing the Master Server certificates for mTLS	""
security.mTLS.volume.cert	Volume Server certificate for mTLS. Ignored if security.mTLS.volume.existingSecret is set	""
security.mTLS.volume.key	Volume Server key for mTLS. Ignored if security.mTLS.volume.existingSecret is set	""
security.mTLS.volume.existingSecret	The name of an existing Secret containing the Volume Server certificates for mTLS	""
security.mTLS.filer.cert	Filer certificate for mTLS. Ignored if security.mTLS.filer.existingSecret is set	""
security.mTLS.filer.key	Filer key for mTLS. Ignored if security.mTLS.filer.existingSecret is set	""
security.mTLS.filer.existingSecret	The name of an existing Secret containing the Filer certificates for mTLS	""
security.mTLS.client.cert	Client certificate for mTLS. Ignored if security.mTLS.client.existingSecret is set	""
security.mTLS.client.key	Client key for mTLS. Ignored if security.mTLS.client.existingSecret is set	""
security.mTLS.client.existingSecret	The name of an existing Secret containing the Client certificates for mTLS	""
clusterDefault	Default SeaweedFS cluster name	sw

Master Server Parameters

Name	Description	Value
master.replicaCount	Number of Master Server replicas to deploy	1
master.containerPorts.http	Master Server HTTP container port	9333
master.containerPorts.grpc	Master Server GRPC container port	19333
master.containerPorts.metrics	Master Server metrics container port	9327
master.extraContainerPorts	Optionally specify extra list of additional ports for Master Server containers	[]
master.livenessProbe.enabled	Enable livenessProbe on Master Server containers	true
master.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
master.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
master.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
master.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
master.livenessProbe.successThreshold	Success threshold for livenessProbe	1
master.readinessProbe.enabled	Enable readinessProbe on Master Server containers	true
master.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
master.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
master.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
master.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
master.readinessProbe.successThreshold	Success threshold for readinessProbe	1
master.startupProbe.enabled	Enable startupProbe on Master Server containers	false
master.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
master.startupProbe.periodSeconds	Period seconds for startupProbe	5
master.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
master.startupProbe.failureThreshold	Failure threshold for startupProbe	15
master.startupProbe.successThreshold	Success threshold for startupProbe	1
master.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
master.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
master.customStartupProbe	Custom startupProbe that overrides the default one	{}
master.resourcesPreset	Set Master Server container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if master.resources is set (master.resources is recommended for production).	nano
master.resources	Set Master Server container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
master.podSecurityContext.enabled	Enable Master Server pods’ Security Context	true
master.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy for Master Server pods	Always
master.podSecurityContext.sysctls	Set kernel settings using the sysctl interface for Master Server pods	[]
master.podSecurityContext.supplementalGroups	Set filesystem extra groups for Master Server pods	[]
master.podSecurityContext.fsGroup	Set fsGroup in Master Server pods’ Security Context	1001
master.containerSecurityContext.enabled	Enabled Master Server container’ Security Context	true
master.containerSecurityContext.seLinuxOptions	Set SELinux options in Master Server container	{}
master.containerSecurityContext.runAsUser	Set runAsUser in Master Server container’ Security Context	1001
master.containerSecurityContext.runAsGroup	Set runAsGroup in Master Server container’ Security Context	1001
master.containerSecurityContext.runAsNonRoot	Set runAsNonRoot in Master Server container’ Security Context	true
master.containerSecurityContext.readOnlyRootFilesystem	Set readOnlyRootFilesystem in Master Server container’ Security Context	true
master.containerSecurityContext.privileged	Set privileged in Master Server container’ Security Context	false
master.containerSecurityContext.allowPrivilegeEscalation	Set allowPrivilegeEscalation in Master Server container’ Security Context	false
master.containerSecurityContext.capabilities.drop	List of capabilities to be dropped in Master Server container	["ALL"]
master.containerSecurityContext.seccompProfile.type	Set seccomp profile in Master Server container	RuntimeDefault
master.logLevel	Master Server log level [0|1|2|3|4]	1
master.bindAddress	Master Server bind address	0.0.0.0
master.config	Master Server configuration	""
master.existingConfigmap	The name of an existing ConfigMap with your custom configuration for Master Server	""
master.command	Override default Master Server container command (useful when using custom images)	[]
master.args	Override default Master Server container args (useful when using custom images)	[]
master.automountServiceAccountToken	Mount Service Account token in Master Server pods	false
master.hostAliases	Master Server pods host aliases	[]
master.statefulsetAnnotations	Annotations for Master Server statefulset	{}
master.podLabels	Extra labels for Master Server pods	{}
master.podAnnotations	Annotations for Master Server pods	{}
master.podAffinityPreset	Pod affinity preset. Ignored if master.affinity is set. Allowed values: soft or hard	""
master.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if master.affinity is set. Allowed values: soft or hard	soft
master.nodeAffinityPreset.type	Node affinity preset type. Ignored if master.affinity is set. Allowed values: soft or hard	""
master.nodeAffinityPreset.key	Node label key to match. Ignored if master.affinity is set	""
master.nodeAffinityPreset.values	Node label values to match. Ignored if master.affinity is set	[]
master.affinity	Affinity for Master Server pods assignment	{}
master.nodeSelector	Node labels for Master Server pods assignment	{}
master.tolerations	Tolerations for Master Server pods assignment	[]
master.updateStrategy.type	Master Server statefulset strategy type	RollingUpdate
master.podManagementPolicy	Pod management policy for Master Server statefulset	Parallel
master.priorityClassName	Master Server pods’ priorityClassName	""
master.topologySpreadConstraints	Topology Spread Constraints for Master Server pod assignment spread across your cluster among failure-domains	[]
master.schedulerName	Name of the k8s scheduler (other than default) for Master Server pods	""
master.terminationGracePeriodSeconds	Seconds Master Server pods need to terminate gracefully	""
master.lifecycleHooks	for Master Server containers to automate configuration before or after startup	{}
master.extraEnvVars	Array with extra environment variables to add to Master Server containers	[]
master.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Master Server containers	""
master.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Master Server containers	""
master.extraVolumes	Optionally specify extra list of additional volumes for the Master Server pods	[]
master.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Master Server containers	[]
master.sidecars	Add additional sidecar containers to the Master Server pods	[]
master.initContainers	Add additional init containers to the Master Server pods	[]
master.pdb.create	Enable/disable a Pod Disruption Budget creation	true
master.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
master.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both master.pdb.minAvailable and master.pdb.maxUnavailable are empty.	""
master.autoscaling.enabled	Enable autoscaling for master	false
master.autoscaling.minReplicas	Minimum number of master replicas	""
master.autoscaling.maxReplicas	Maximum number of master replicas	""
master.autoscaling.targetCPU	Target CPU utilization percentage	""
master.autoscaling.targetMemory	Target Memory utilization percentage	""

Master Server Traffic Exposure Parameters

Name	Description	Value
master.service.type	Master Server service type	ClusterIP
master.service.ports.http	Master Server service HTTP port	9333
master.service.ports.grpc	Master Server service GRPC port	19333
master.service.nodePorts.http	Node port for HTTP	""
master.service.nodePorts.grpc	Node port for GRPC	""
master.service.clusterIP	Master Server service Cluster IP	""
master.service.loadBalancerIP	Master Server service Load Balancer IP	""
master.service.loadBalancerSourceRanges	Master Server service Load Balancer sources	[]
master.service.externalTrafficPolicy	Master Server service external traffic policy	Cluster
master.service.annotations	Additional custom annotations for Master Server service	{}
master.service.extraPorts	Extra ports to expose in Master Server service (normally used with the sidecars value)	[]
master.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
master.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
master.service.headless.annotations	Annotations for the headless service.	{}
master.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created for Master Server	true
master.networkPolicy.allowExternal	Don’t require server label for connections	true
master.networkPolicy.allowExternalEgress	Allow the Master Server pods to access any range of port and all destinations.	true
master.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
master.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
master.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
master.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
master.ingress.enabled	Enable ingress record generation for Master Server	false
master.ingress.pathType	Ingress path type	ImplementationSpecific
master.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
master.ingress.hostname	Default host for the ingress record	master.seaweedfs.local
master.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
master.ingress.path	Default path for the ingress record	/
master.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
master.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
master.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
master.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
master.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
master.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
master.ingress.secrets	Custom TLS certificates as secrets	[]
master.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Master Server Persistence Parameters

Name	Description	Value
master.persistence.enabled	Enable persistence on Master Server using Persistent Volume Claims	true
master.persistence.mountPath	Path to mount the volume at.	/data
master.persistence.subPath	The subdirectory of the volume to mount to, useful in dev environments and one PV for multiple services	""
master.persistence.storageClass	Storage class of backing PVC	""
master.persistence.annotations	Persistent Volume Claim annotations	{}
master.persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
master.persistence.size	Size of data volume	8Gi
master.persistence.existingClaim	The name of an existing PVC to use for persistence	""
master.persistence.selector	Selector to match an existing Persistent Volume for data PVC	{}
master.persistence.dataSource	Custom PVC data source	{}

Master Server Metrics Parameters

Name	Description	Value
master.metrics.enabled	Enable the export of Prometheus metrics	false
master.metrics.service.port	Metrics service port	9327
master.metrics.service.annotations	Annotations for the metrics service.	{}
master.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
master.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
master.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
master.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
master.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
master.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
master.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
master.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
master.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
master.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
master.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

Volume Server Parameters

Name	Description	Value
volume.replicaCount	Number of Volume Server replicas to deploy	1
volume.containerPorts.http	Volume Server HTTP container port	8080
volume.containerPorts.grpc	Volume Server GRPC container port	18080
volume.containerPorts.metrics	Volume Server metrics container port	9327
volume.extraContainerPorts	Optionally specify extra list of additional ports for Volume Server containers	[]
volume.livenessProbe.enabled	Enable livenessProbe on Volume Server containers	true
volume.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
volume.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
volume.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
volume.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
volume.livenessProbe.successThreshold	Success threshold for livenessProbe	1
volume.readinessProbe.enabled	Enable readinessProbe on Volume Server containers	true
volume.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
volume.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
volume.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
volume.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
volume.readinessProbe.successThreshold	Success threshold for readinessProbe	1
volume.startupProbe.enabled	Enable startupProbe on Volume Server containers	false
volume.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
volume.startupProbe.periodSeconds	Period seconds for startupProbe	5
volume.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
volume.startupProbe.failureThreshold	Failure threshold for startupProbe	15
volume.startupProbe.successThreshold	Success threshold for startupProbe	1
volume.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
volume.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
volume.customStartupProbe	Custom startupProbe that overrides the default one	{}
volume.resourcesPreset	Set Volume Server container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if volume.resources is set (volume.resources is recommended for production).	nano
volume.resources	Set Volume Server container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volume.podSecurityContext.enabled	Enable Volume Server pods’ Security Context	true
volume.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy for Volume Server pods	Always
volume.podSecurityContext.sysctls	Set kernel settings using the sysctl interface for Volume Server pods	[]
volume.podSecurityContext.supplementalGroups	Set filesystem extra groups for Volume Server pods	[]
volume.podSecurityContext.fsGroup	Set fsGroup in Volume Server pods’ Security Context	1001
volume.containerSecurityContext.enabled	Enabled Volume Server container’ Security Context	true
volume.containerSecurityContext.seLinuxOptions	Set SELinux options in Volume Server container	{}
volume.containerSecurityContext.runAsUser	Set runAsUser in Volume Server container’ Security Context	1001
volume.containerSecurityContext.runAsGroup	Set runAsGroup in Volume Server container’ Security Context	1001
volume.containerSecurityContext.runAsNonRoot	Set runAsNonRoot in Volume Server container’ Security Context	true
volume.containerSecurityContext.readOnlyRootFilesystem	Set readOnlyRootFilesystem in Volume Server container’ Security Context	true
volume.containerSecurityContext.privileged	Set privileged in Volume Server container’ Security Context	false
volume.containerSecurityContext.allowPrivilegeEscalation	Set allowPrivilegeEscalation in Volume Server container’ Security Context	false
volume.containerSecurityContext.capabilities.drop	List of capabilities to be dropped in Volume Server container	["ALL"]
volume.containerSecurityContext.seccompProfile.type	Set seccomp profile in Volume Server container	RuntimeDefault
volume.logLevel	Volume Server log level [0|1|2|3|4]	1
volume.bindAddress	Volume Server bind address	0.0.0.0
volume.publicUrl	Volume Server public URL	""
volume.config	Volume Server configuration	""
volume.existingConfigmap	The name of an existing ConfigMap with your custom configuration for Volume Server	""
volume.command	Override default Volume Server container command (useful when using custom images)	[]
volume.args	Override default Volume Server container args (useful when using custom images)	[]
volume.automountServiceAccountToken	Mount Service Account token in Volume Server pods	false
volume.hostAliases	Volume Server pods host aliases	[]
volume.statefulsetAnnotations	Annotations for Volume Server statefulset	{}
volume.podLabels	Extra labels for Volume Server pods	{}
volume.podAnnotations	Annotations for Volume Server pods	{}
volume.podAffinityPreset	Pod affinity preset. Ignored if volume.affinity is set. Allowed values: soft or hard	""
volume.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if volume.affinity is set. Allowed values: soft or hard	soft
volume.nodeAffinityPreset.type	Node affinity preset type. Ignored if volume.affinity is set. Allowed values: soft or hard	""
volume.nodeAffinityPreset.key	Node label key to match. Ignored if volume.affinity is set	""
volume.nodeAffinityPreset.values	Node label values to match. Ignored if volume.affinity is set	[]
volume.affinity	Affinity for Volume Server pods assignment	{}
volume.nodeSelector	Node labels for Volume Server pods assignment	{}
volume.tolerations	Tolerations for Volume Server pods assignment	[]
volume.updateStrategy.type	Volume Server statefulset strategy type	RollingUpdate
volume.podManagementPolicy	Pod management policy for Volume Server statefulset	Parallel
volume.priorityClassName	Volume Server pods’ priorityClassName	""
volume.topologySpreadConstraints	Topology Spread Constraints for Volume Server pod assignment spread across your cluster among failure-domains	[]
volume.schedulerName	Name of the k8s scheduler (other than default) for Volume Server pods	""
volume.terminationGracePeriodSeconds	Seconds Volume Server pods need to terminate gracefully	""
volume.lifecycleHooks	for Volume Server containers to automate configuration before or after startup	{}
volume.extraEnvVars	Array with extra environment variables to add to Volume Server containers	[]
volume.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Volume Server containers	""
volume.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Volume Server containers	""
volume.extraVolumes	Optionally specify extra list of additional volumes for the Volume Server pods	[]
volume.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Volume Server containers	[]
volume.sidecars	Add additional sidecar containers to the Volume Server pods	[]
volume.initContainers	Add additional init containers to the Volume Server pods	[]
volume.pdb.create	Enable/disable a Pod Disruption Budget creation	true
volume.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
volume.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both volume.pdb.minAvailable and volume.pdb.maxUnavailable are empty.	""
volume.autoscaling.enabled	Enable autoscaling for volume	false
volume.autoscaling.minReplicas	Minimum number of volume replicas	""
volume.autoscaling.maxReplicas	Maximum number of volume replicas	""
volume.autoscaling.targetCPU	Target CPU utilization percentage	""
volume.autoscaling.targetMemory	Target Memory utilization percentage	""

Volume Server Traffic Exposure Parameters

Name	Description	Value
volume.service.type	Volume Server service type	ClusterIP
volume.service.ports.http	Volume Server service HTTP port	8080
volume.service.ports.grpc	Volume Server service GRPC port	18080
volume.service.nodePorts.http	Node port for HTTP	""
volume.service.nodePorts.grpc	Node port for GRPC	""
volume.service.clusterIP	Volume Server service Cluster IP	""
volume.service.loadBalancerIP	Volume Server service Load Balancer IP	""
volume.service.loadBalancerSourceRanges	Volume Server service Load Balancer sources	[]
volume.service.externalTrafficPolicy	Volume Server service external traffic policy	Cluster
volume.service.annotations	Additional custom annotations for Volume Server service	{}
volume.service.extraPorts	Extra ports to expose in Volume Server service (normally used with the sidecars value)	[]
volume.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
volume.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
volume.service.headless.annotations	Annotations for the headless service.	{}
volume.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created for Volume Server	true
volume.networkPolicy.allowExternal	Don’t require server label for connections	true
volume.networkPolicy.allowExternalEgress	Allow the Volume Server pods to access any range of port and all destinations.	true
volume.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
volume.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
volume.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
volume.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
volume.ingress.enabled	Enable ingress record generation for Volume Server	false
volume.ingress.pathType	Ingress path type	ImplementationSpecific
volume.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
volume.ingress.hostname	Default host for the ingress record	volume.seaweedfs.local
volume.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
volume.ingress.path	Default path for the ingress record	/
volume.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
volume.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
volume.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
volume.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
volume.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
volume.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
volume.ingress.secrets	Custom TLS certificates as secrets	[]
volume.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Volume Server Persistence Parameters

Name	Description	Value
volume.dataVolumes[0].name	Name of the data volume	data-0
volume.dataVolumes[0].mountPath	Path to mount the volume at.	/data-0
volume.dataVolumes[0].subPath	The subdirectory of the volume to mount to, useful in dev environments and one PV for multiple services	""
volume.dataVolumes[0].persistence.enabled	Enable persistence on Volume Server using Persistent Volume Claims	true
volume.dataVolumes[0].persistence.storageClass	Storage class of backing PVC	""
volume.dataVolumes[0].persistence.annotations	Persistent Volume Claim annotations	{}
volume.dataVolumes[0].persistence.accessModes	Persistent Volume Access Modes	["ReadWriteOnce"]
volume.dataVolumes[0].persistence.size	Size of data volume	8Gi
volume.dataVolumes[0].persistence.existingClaim	The name of an existing PVC to use for persistence	""
volume.dataVolumes[0].persistence.selector	Selector to match an existing Persistent Volume for data PVC	{}
volume.dataVolumes[0].persistence.dataSource	Custom PVC data source	{}

Volume Server Metrics Parameters

Name	Description	Value
volume.metrics.enabled	Enable the export of Prometheus metrics	false
volume.metrics.service.port	Metrics service port	9327
volume.metrics.service.annotations	Annotations for the metrics service.	{}
volume.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
volume.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
volume.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
volume.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
volume.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
volume.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
volume.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
volume.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
volume.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
volume.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
volume.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

Filer Server Parameters

Name	Description	Value
filer.enabled	Enable Filer Server deployment	true
filer.replicaCount	Number of Filer Server replicas to deploy	1
filer.containerPorts.http	Filer Server HTTP container port	8888
filer.containerPorts.grpc	Filer Server GRPC container port	18888
filer.containerPorts.metrics	Filer Server metrics container port	9327
filer.extraContainerPorts	Optionally specify extra list of additional ports for Filer Server containers	[]
filer.livenessProbe.enabled	Enable livenessProbe on Filer Server containers	true
filer.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
filer.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
filer.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
filer.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
filer.livenessProbe.successThreshold	Success threshold for livenessProbe	1
filer.readinessProbe.enabled	Enable readinessProbe on Filer Server containers	true
filer.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
filer.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
filer.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
filer.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
filer.readinessProbe.successThreshold	Success threshold for readinessProbe	1
filer.startupProbe.enabled	Enable startupProbe on Filer Server containers	false
filer.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
filer.startupProbe.periodSeconds	Period seconds for startupProbe	5
filer.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
filer.startupProbe.failureThreshold	Failure threshold for startupProbe	15
filer.startupProbe.successThreshold	Success threshold for startupProbe	1
filer.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
filer.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
filer.customStartupProbe	Custom startupProbe that overrides the default one	{}
filer.resourcesPreset	Set Filer Server container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if filer.resources is set (filer.resources is recommended for production).	nano
filer.resources	Set Filer Server container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
filer.podSecurityContext.enabled	Enable Filer Server pods’ Security Context	true
filer.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy for Filer Server pods	Always
filer.podSecurityContext.sysctls	Set kernel settings using the sysctl interface for Filer Server pods	[]
filer.podSecurityContext.supplementalGroups	Set filesystem extra groups for Filer Server pods	[]
filer.podSecurityContext.fsGroup	Set fsGroup in Filer Server pods’ Security Context	1001
filer.containerSecurityContext.enabled	Enabled Filer Server container’ Security Context	true
filer.containerSecurityContext.seLinuxOptions	Set SELinux options in Filer Server container	{}
filer.containerSecurityContext.runAsUser	Set runAsUser in Filer Server container’ Security Context	1001
filer.containerSecurityContext.runAsGroup	Set runAsGroup in Filer Server container’ Security Context	1001
filer.containerSecurityContext.runAsNonRoot	Set runAsNonRoot in Filer Server container’ Security Context	true
filer.containerSecurityContext.readOnlyRootFilesystem	Set readOnlyRootFilesystem in Filer Server container’ Security Context	true
filer.containerSecurityContext.privileged	Set privileged in Filer Server container’ Security Context	false
filer.containerSecurityContext.allowPrivilegeEscalation	Set allowPrivilegeEscalation in Filer Server container’ Security Context	false
filer.containerSecurityContext.capabilities.drop	List of capabilities to be dropped in Filer Server container	["ALL"]
filer.containerSecurityContext.seccompProfile.type	Set seccomp profile in Filer Server container	RuntimeDefault
filer.logLevel	Filer Server log level [0|1|2|3|4]	1
filer.bindAddress	Filer Server bind address	0.0.0.0
filer.config	Filer Server configuration	`[leveldb2]

enabled = false | |filer.existingConfigmap| The name of an existing ConfigMap with your custom configuration for Filer Server |““| |filer.command| Override default Filer Server container command (useful when using custom images) |[]| |filer.args| Override default Filer Server container args (useful when using custom images) |[]| |filer.automountServiceAccountToken| Mount Service Account token in Filer Server pods |false| |filer.hostAliases| Filer Server pods host aliases |[]| |filer.statefulsetAnnotations| Annotations for Filer Server statefulset |{}| |filer.podLabels| Extra labels for Filer Server pods |{}| |filer.podAnnotations| Annotations for Filer Server pods |{}| |filer.podAffinityPreset| Pod affinity preset. Ignored iffiler.affinityis set. Allowed values:softorhard|””| |filer.podAntiAffinityPreset| Pod anti-affinity preset. Ignored iffiler.affinityis set. Allowed values:softorhard|soft| |filer.nodeAffinityPreset.type| Node affinity preset type. Ignored iffiler.affinityis set. Allowed values:softorhard|““| |filer.nodeAffinityPreset.key| Node label key to match. Ignored iffiler.affinityis set |””| |filer.nodeAffinityPreset.values| Node label values to match. Ignored iffiler.affinityis set |[]| |filer.affinity| Affinity for Filer Server pods assignment |{}| |filer.nodeSelector| Node labels for Filer Server pods assignment |{}| |filer.tolerations| Tolerations for Filer Server pods assignment |[]| |filer.updateStrategy.type| Filer Server statefulset strategy type |RollingUpdate| |filer.podManagementPolicy| Pod management policy for Filer Server statefulset |Parallel| |filer.priorityClassName| Filer Server pods' priorityClassName |““| |filer.topologySpreadConstraints| Topology Spread Constraints for Filer Server pod assignment spread across your cluster among failure-domains |[]| |filer.schedulerName| Name of the k8s scheduler (other than default) for Filer Server pods |””| |filer.terminationGracePeriodSeconds| Seconds Filer Server pods need to terminate gracefully |““| |filer.lifecycleHooks| for Filer Server containers to automate configuration before or after startup |{}| |filer.extraEnvVars| Array with extra environment variables to add to Filer Server containers |[]| |filer.extraEnvVarsCM| Name of existing ConfigMap containing extra env vars for Filer Server containers |””| |filer.extraEnvVarsSecret| Name of existing Secret containing extra env vars for Filer Server containers |““| |filer.extraVolumes| Optionally specify extra list of additional volumes for the Filer Server pods |[]| |filer.extraVolumeMounts| Optionally specify extra list of additional volumeMounts for the Filer Server containers |[]| |filer.sidecars| Add additional sidecar containers to the Filer Server pods |[]| |filer.initContainers| Add additional init containers to the Filer Server pods |[]| |filer.pdb.create| Enable/disable a Pod Disruption Budget creation |true| |filer.pdb.minAvailable| Minimum number/percentage of pods that should remain scheduled |””| |filer.pdb.maxUnavailable| Maximum number/percentage of pods that may be made unavailable. Defaults to1if bothfiler.pdb.minAvailableandfiler.pdb.maxUnavailableare empty. |““| |filer.autoscaling.enabled| Enable autoscaling for filer |false| |filer.autoscaling.minReplicas| Minimum number of filer replicas |””| |filer.autoscaling.maxReplicas| Maximum number of filer replicas |““| |filer.autoscaling.targetCPU| Target CPU utilization percentage |””| |filer.autoscaling.targetMemory| Target Memory utilization percentage |""` |

Filer Server Traffic Exposure Parameters

Name	Description	Value
filer.service.type	Filer Server service type	ClusterIP
filer.service.ports.http	Filer Server service HTTP port	8888
filer.service.ports.grpc	Filer Server service GRPC port	18888
filer.service.nodePorts.http	Node port for HTTP	""
filer.service.nodePorts.grpc	Node port for GRPC	""
filer.service.clusterIP	Filer Server service Cluster IP	""
filer.service.loadBalancerIP	Filer Server service Load Balancer IP	""
filer.service.loadBalancerSourceRanges	Filer Server service Load Balancer sources	[]
filer.service.externalTrafficPolicy	Filer Server service external traffic policy	Cluster
filer.service.annotations	Additional custom annotations for Filer Server service	{}
filer.service.extraPorts	Extra ports to expose in Filer Server service (normally used with the sidecars value)	[]
filer.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
filer.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
filer.service.headless.annotations	Annotations for the headless service.	{}
filer.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created for Filer Server	true
filer.networkPolicy.allowExternal	Don’t require server label for connections	true
filer.networkPolicy.allowExternalEgress	Allow the Filer Server pods to access any range of port and all destinations.	true
filer.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
filer.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
filer.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
filer.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
filer.ingress.enabled	Enable ingress record generation for Filer Server	false
filer.ingress.pathType	Ingress path type	ImplementationSpecific
filer.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
filer.ingress.hostname	Default host for the ingress record	filer.seaweedfs.local
filer.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
filer.ingress.path	Default path for the ingress record	/
filer.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
filer.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
filer.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
filer.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
filer.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
filer.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
filer.ingress.secrets	Custom TLS certificates as secrets	[]
filer.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Filer Server Metrics Parameters

Name	Description	Value
filer.metrics.enabled	Enable the export of Prometheus metrics	false
filer.metrics.service.port	Metrics service port	9327
filer.metrics.service.annotations	Annotations for the metrics service.	{}
filer.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
filer.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
filer.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
filer.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
filer.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
filer.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
filer.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
filer.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
filer.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
filer.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
filer.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

Amazon S3 API Parameters

Name	Description	Value
s3.enabled	Enable Amazon S3 API deployment	false
s3.replicaCount	Number of Amazon S3 API replicas to deploy	1
s3.containerPorts.http	Amazon S3 API HTTP container port	8333
s3.containerPorts.grpc	Amazon S3 API GRPC container port	18333
s3.containerPorts.metrics	Amazon S3 API metrics container port	9327
s3.extraContainerPorts	Optionally specify extra list of additional ports for Amazon S3 API containers	[]
s3.livenessProbe.enabled	Enable livenessProbe on Amazon S3 API containers	true
s3.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
s3.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
s3.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
s3.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
s3.livenessProbe.successThreshold	Success threshold for livenessProbe	1
s3.readinessProbe.enabled	Enable readinessProbe on Amazon S3 API containers	true
s3.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
s3.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
s3.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
s3.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
s3.readinessProbe.successThreshold	Success threshold for readinessProbe	1
s3.startupProbe.enabled	Enable startupProbe on Amazon S3 API containers	false
s3.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
s3.startupProbe.periodSeconds	Period seconds for startupProbe	5
s3.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
s3.startupProbe.failureThreshold	Failure threshold for startupProbe	15
s3.startupProbe.successThreshold	Success threshold for startupProbe	1
s3.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
s3.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
s3.customStartupProbe	Custom startupProbe that overrides the default one	{}
s3.resourcesPreset	Set Amazon S3 API container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if s3.resources is set (s3.resources is recommended for production).	nano
s3.resources	Set Amazon S3 API container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
s3.podSecurityContext.enabled	Enable Amazon S3 API pods’ Security Context	true
s3.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy for Amazon S3 API pods	Always
s3.podSecurityContext.sysctls	Set kernel settings using the sysctl interface for Amazon S3 API pods	[]
s3.podSecurityContext.supplementalGroups	Set filesystem extra groups for Amazon S3 API pods	[]
s3.podSecurityContext.fsGroup	Set fsGroup in Amazon S3 API pods’ Security Context	1001
s3.containerSecurityContext.enabled	Enabled Amazon S3 API container’ Security Context	true
s3.containerSecurityContext.seLinuxOptions	Set SELinux options in Amazon S3 API container	{}
s3.containerSecurityContext.runAsUser	Set runAsUser in Amazon S3 API container’ Security Context	1001
s3.containerSecurityContext.runAsGroup	Set runAsGroup in Amazon S3 API container’ Security Context	1001
s3.containerSecurityContext.runAsNonRoot	Set runAsNonRoot in Amazon S3 API container’ Security Context	true
s3.containerSecurityContext.readOnlyRootFilesystem	Set readOnlyRootFilesystem in Amazon S3 API container’ Security Context	true
s3.containerSecurityContext.privileged	Set privileged in Amazon S3 API container’ Security Context	false
s3.containerSecurityContext.allowPrivilegeEscalation	Set allowPrivilegeEscalation in Amazon S3 API container’ Security Context	false
s3.containerSecurityContext.capabilities.drop	List of capabilities to be dropped in Amazon S3 API container	["ALL"]
s3.containerSecurityContext.seccompProfile.type	Set seccomp profile in Amazon S3 API container	RuntimeDefault
s3.logLevel	Amazon S3 API log level [0|1|2|3|4]	1
s3.bindAddress	Amazon S3 API bind address	0.0.0.0
s3.auth.enabled	Enable Amazon S3 API authentication	false
s3.auth.existingSecret	Existing secret with Amazon S3 API authentication configuration	""
s3.auth.existingSecretConfigKey	Key of the above existing secret with S3 API authentication configuration, defaults to config.json	""
s3.auth.adminAccessKeyId	Amazon S3 API access key with admin privileges. Ignored if security.mTLS.volume.existingSecret is set	""
s3.auth.adminSecretAccessKey	Amazon S3 API secret key with admin privileges. Ignored if security.mTLS.volume.existingSecret is set	""
s3.auth.readAccessKeyId	Amazon S3 API read access key with read-only privileges. Ignored if security.mTLS.volume.existingSecret is set	""
s3.auth.readSecretAccessKey	Amazon S3 API read secret key with read-only privileges. Ignored if security.mTLS.volume.existingSecret is set	""
s3.command	Override default Amazon S3 API container command (useful when using custom images)	[]
s3.args	Override default Amazon S3 API container args (useful when using custom images)	[]
s3.automountServiceAccountToken	Mount Service Account token in Amazon S3 API pods	false
s3.hostAliases	Amazon S3 API pods host aliases	[]
s3.statefulsetAnnotations	Annotations for Amazon S3 API statefulset	{}
s3.podLabels	Extra labels for Amazon S3 API pods	{}
s3.podAnnotations	Annotations for Amazon S3 API pods	{}
s3.podAffinityPreset	Pod affinity preset. Ignored if s3.affinity is set. Allowed values: soft or hard	""
s3.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if s3.affinity is set. Allowed values: soft or hard	soft
s3.nodeAffinityPreset.type	Node affinity preset type. Ignored if s3.affinity is set. Allowed values: soft or hard	""
s3.nodeAffinityPreset.key	Node label key to match. Ignored if s3.affinity is set	""
s3.nodeAffinityPreset.values	Node label values to match. Ignored if s3.affinity is set	[]
s3.affinity	Affinity for Amazon S3 API pods assignment	{}
s3.nodeSelector	Node labels for Amazon S3 API pods assignment	{}
s3.tolerations	Tolerations for Amazon S3 API pods assignment	[]
s3.updateStrategy.type	Amazon S3 API deployment strategy type	RollingUpdate
s3.priorityClassName	Amazon S3 API pods’ priorityClassName	""
s3.topologySpreadConstraints	Topology Spread Constraints for Amazon S3 API pod assignment spread across your cluster among failure-domains	[]
s3.schedulerName	Name of the k8s scheduler (other than default) for Amazon S3 API pods	""
s3.terminationGracePeriodSeconds	Seconds Amazon S3 API pods need to terminate gracefully	""
s3.lifecycleHooks	for Amazon S3 API containers to automate configuration before or after startup	{}
s3.extraEnvVars	Array with extra environment variables to add to Amazon S3 API containers	[]
s3.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Amazon S3 API containers	""
s3.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Amazon S3 API containers	""
s3.extraVolumes	Optionally specify extra list of additional volumes for the Amazon S3 API pods	[]
s3.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Amazon S3 API containers	[]
s3.sidecars	Add additional sidecar containers to the Amazon S3 API pods	[]
s3.initContainers	Add additional init containers to the Amazon S3 API pods	[]
s3.pdb.create	Enable/disable a Pod Disruption Budget creation	true
s3.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
s3.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both s3.pdb.minAvailable and s3.pdb.maxUnavailable are empty.	""
s3.autoscaling.enabled	Enable autoscaling for s3	false
s3.autoscaling.minReplicas	Minimum number of s3 replicas	""
s3.autoscaling.maxReplicas	Maximum number of s3 replicas	""
s3.autoscaling.targetCPU	Target CPU utilization percentage	""
s3.autoscaling.targetMemory	Target Memory utilization percentage	""

Amazon S3 API Traffic Exposure Parameters

Name	Description	Value
s3.service.type	Amazon S3 API service type	ClusterIP
s3.service.ports.http	Amazon S3 API service HTTP port	8333
s3.service.ports.grpc	Amazon S3 API service GRPC port	18333
s3.service.nodePorts.http	Node port for HTTP	""
s3.service.nodePorts.grpc	Node port for GRPC	""
s3.service.clusterIP	Amazon S3 API service Cluster IP	""
s3.service.loadBalancerIP	Amazon S3 API service Load Balancer IP	""
s3.service.loadBalancerSourceRanges	Amazon S3 API service Load Balancer sources	[]
s3.service.externalTrafficPolicy	Amazon S3 API service external traffic policy	Cluster
s3.service.annotations	Additional custom annotations for Amazon S3 API service	{}
s3.service.extraPorts	Extra ports to expose in Amazon S3 API service (normally used with the sidecars value)	[]
s3.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
s3.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
s3.service.headless.annotations	Annotations for the headless service.	{}
s3.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created for Amazon S3 API	true
s3.networkPolicy.allowExternal	Don’t require server label for connections	true
s3.networkPolicy.allowExternalEgress	Allow the Amazon S3 API pods to access any range of port and all destinations.	true
s3.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
s3.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
s3.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
s3.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
s3.ingress.enabled	Enable ingress record generation for Amazon S3 API	false
s3.ingress.pathType	Ingress path type	ImplementationSpecific
s3.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
s3.ingress.hostname	Default host for the ingress record	s3.seaweedfs.local
s3.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
s3.ingress.path	Default path for the ingress record	/
s3.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
s3.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
s3.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
s3.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
s3.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
s3.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
s3.ingress.secrets	Custom TLS certificates as secrets	[]
s3.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Amazon S3 API Metrics Parameters

Name	Description	Value
s3.metrics.enabled	Enable the export of Prometheus metrics	false
s3.metrics.service.port	Metrics service port	9327
s3.metrics.service.annotations	Annotations for the metrics service.	{}
s3.metrics.serviceMonitor.enabled	if true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true)	false
s3.metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
s3.metrics.serviceMonitor.annotations	Additional custom annotations for the ServiceMonitor	{}
s3.metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
s3.metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
s3.metrics.serviceMonitor.honorLabels	honorLabels chooses the metric’s labels on collisions with target labels	false
s3.metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
s3.metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
s3.metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
s3.metrics.serviceMonitor.relabelings	Specify general relabeling	[]
s3.metrics.serviceMonitor.selector	Prometheus instance selector labels	{}

WebDAV Parameters

Name	Description	Value
webdav.enabled	Enable WebDAV deployment	false
webdav.replicaCount	Number of WebDAV replicas to deploy	1
webdav.containerPorts.http	WebDAV HTTP container port (HTTPS if webdav.tls.enabled is true)	7333
webdav.extraContainerPorts	Optionally specify extra list of additional ports for WebDAV containers	[]
webdav.livenessProbe.enabled	Enable livenessProbe on WebDAV containers	true
webdav.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
webdav.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
webdav.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
webdav.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
webdav.livenessProbe.successThreshold	Success threshold for livenessProbe	1
webdav.readinessProbe.enabled	Enable readinessProbe on WebDAV containers	true
webdav.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
webdav.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
webdav.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
webdav.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
webdav.readinessProbe.successThreshold	Success threshold for readinessProbe	1
webdav.startupProbe.enabled	Enable startupProbe on WebDAV containers	false
webdav.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
webdav.startupProbe.periodSeconds	Period seconds for startupProbe	5
webdav.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
webdav.startupProbe.failureThreshold	Failure threshold for startupProbe	15
webdav.startupProbe.successThreshold	Success threshold for startupProbe	1
webdav.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
webdav.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
webdav.customStartupProbe	Custom startupProbe that overrides the default one	{}
webdav.resourcesPreset	Set WebDAV container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if webdav.resources is set (webdav.resources is recommended for production).	nano
webdav.resources	Set WebDAV container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
webdav.podSecurityContext.enabled	Enable WebDAV pods’ Security Context	true
webdav.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy for WebDAV pods	Always
webdav.podSecurityContext.sysctls	Set kernel settings using the sysctl interface for WebDAV pods	[]
webdav.podSecurityContext.supplementalGroups	Set filesystem extra groups for WebDAV pods	[]
webdav.podSecurityContext.fsGroup	Set fsGroup in WebDAV pods’ Security Context	1001
webdav.containerSecurityContext.enabled	Enabled WebDAV container’ Security Context	true
webdav.containerSecurityContext.seLinuxOptions	Set SELinux options in WebDAV container	{}
webdav.containerSecurityContext.runAsUser	Set runAsUser in WebDAV container’ Security Context	1001
webdav.containerSecurityContext.runAsGroup	Set runAsGroup in WebDAV container’ Security Context	1001
webdav.containerSecurityContext.runAsNonRoot	Set runAsNonRoot in WebDAV container’ Security Context	true
webdav.containerSecurityContext.readOnlyRootFilesystem	Set readOnlyRootFilesystem in WebDAV container’ Security Context	true
webdav.containerSecurityContext.privileged	Set privileged in WebDAV container’ Security Context	false
webdav.containerSecurityContext.allowPrivilegeEscalation	Set allowPrivilegeEscalation in WebDAV container’ Security Context	false
webdav.containerSecurityContext.capabilities.drop	List of capabilities to be dropped in WebDAV container	["ALL"]
webdav.containerSecurityContext.seccompProfile.type	Set seccomp profile in WebDAV container	RuntimeDefault
webdav.logLevel	WebDAV log level [0|1|2|3|4]	1
webdav.tls.enabled	Enable TLS transport for WebDAV	false
webdav.tls.autoGenerated.enabled	Enable automatic generation of certificates for TLS	false
webdav.tls.autoGenerated.engine	Mechanism to generate the certificates (allowed values: helm, cert-manager)	helm
webdav.tls.autoGenerated.certManager.existingIssuer	The name of an existing Issuer to use for generating the certificates (only for cert-manager engine)	""
webdav.tls.autoGenerated.certManager.existingIssuerKind	Existing Issuer kind, defaults to Issuer (only for cert-manager engine)	""
webdav.tls.autoGenerated.certManager.keyAlgorithm	Key algorithm for the certificates (only for cert-manager engine)	RSA
webdav.tls.autoGenerated.certManager.keySize	Key size for the certificates (only for cert-manager engine)	2048
webdav.tls.autoGenerated.certManager.duration	Duration for the certificates (only for cert-manager engine)	2160h
webdav.tls.autoGenerated.certManager.renewBefore	Renewal period for the certificates (only for cert-manager engine)	360h
webdav.tls.existingSecret	The name of an existing Secret containing the certificates for TLS	""
webdav.tls.cert	Volume Server certificate for TLS. Ignored if webdav.tls.existingSecret is set	""
webdav.tls.key	Volume Server key for TLS. Ignored if webdav.tls.existingSecret is set	""
webdav.command	Override default WebDAV container command (useful when using custom images)	[]
webdav.args	Override default WebDAV container args (useful when using custom images)	[]
webdav.automountServiceAccountToken	Mount Service Account token in WebDAV pods	false
webdav.hostAliases	WebDAV pods host aliases	[]
webdav.statefulsetAnnotations	Annotations for WebDAV statefulset	{}
webdav.podLabels	Extra labels for WebDAV pods	{}
webdav.podAnnotations	Annotations for WebDAV pods	{}
webdav.podAffinityPreset	Pod affinity preset. Ignored if webdav.affinity is set. Allowed values: soft or hard	""
webdav.podAntiAffinityPreset	Pod anti-affinity preset. Ignored if webdav.affinity is set. Allowed values: soft or hard	soft
webdav.nodeAffinityPreset.type	Node affinity preset type. Ignored if webdav.affinity is set. Allowed values: soft or hard	""
webdav.nodeAffinityPreset.key	Node label key to match. Ignored if webdav.affinity is set	""
webdav.nodeAffinityPreset.values	Node label values to match. Ignored if webdav.affinity is set	[]
webdav.affinity	Affinity for WebDAV pods assignment	{}
webdav.nodeSelector	Node labels for WebDAV pods assignment	{}
webdav.tolerations	Tolerations for WebDAV pods assignment	[]
webdav.updateStrategy.type	WebDAV deployment strategy type	RollingUpdate
webdav.priorityClassName	WebDAV pods’ priorityClassName	""
webdav.topologySpreadConstraints	Topology Spread Constraints for WebDAV pod assignment spread across your cluster among failure-domains	[]
webdav.schedulerName	Name of the k8s scheduler (other than default) for WebDAV pods	""
webdav.terminationGracePeriodSeconds	Seconds WebDAV pods need to terminate gracefully	""
webdav.lifecycleHooks	for WebDAV containers to automate configuration before or after startup	{}
webdav.extraEnvVars	Array with extra environment variables to add to WebDAV containers	[]
webdav.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for WebDAV containers	""
webdav.extraEnvVarsSecret	Name of existing Secret containing extra env vars for WebDAV containers	""
webdav.extraVolumes	Optionally specify extra list of additional volumes for the WebDAV pods	[]
webdav.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the WebDAV containers	[]
webdav.sidecars	Add additional sidecar containers to the WebDAV pods	[]
webdav.initContainers	Add additional init containers to the WebDAV pods	[]
webdav.pdb.create	Enable/disable a Pod Disruption Budget creation	true
webdav.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
webdav.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both webdav.pdb.minAvailable and webdav.pdb.maxUnavailable are empty.	""
webdav.autoscaling.enabled	Enable autoscaling for webdav	false
webdav.autoscaling.minReplicas	Minimum number of webdav replicas	""
webdav.autoscaling.maxReplicas	Maximum number of webdav replicas	""
webdav.autoscaling.targetCPU	Target CPU utilization percentage	""
webdav.autoscaling.targetMemory	Target Memory utilization percentage	""

WebDAV Traffic Exposure Parameters

Name	Description	Value
webdav.service.type	WebDAV service type	ClusterIP
webdav.service.ports.http	WebDAV service HTTP port (HTTPS if webdav.tls.enabled is true)	7333
webdav.service.nodePorts.http	Node port for HTTP (HTTPS if webdav.tls.enabled is true)	""
webdav.service.clusterIP	WebDAV service Cluster IP	""
webdav.service.loadBalancerIP	WebDAV service Load Balancer IP	""
webdav.service.loadBalancerSourceRanges	WebDAV service Load Balancer sources	[]
webdav.service.externalTrafficPolicy	WebDAV service external traffic policy	Cluster
webdav.service.annotations	Additional custom annotations for WebDAV service	{}
webdav.service.extraPorts	Extra ports to expose in WebDAV service (normally used with the sidecars value)	[]
webdav.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
webdav.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
webdav.service.headless.annotations	Annotations for the headless service.	{}
webdav.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created for WebDAV	true
webdav.networkPolicy.allowExternal	Don’t require server label for connections	true
webdav.networkPolicy.allowExternalEgress	Allow the WebDAV pods to access any range of port and all destinations.	true
webdav.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
webdav.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)	[]
webdav.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
webdav.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
webdav.ingress.enabled	Enable ingress record generation for WebDAV	false
webdav.ingress.pathType	Ingress path type	ImplementationSpecific
webdav.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
webdav.ingress.hostname	Default host for the ingress record	webdav.seaweedfs.local
webdav.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
webdav.ingress.path	Default path for the ingress record	/
webdav.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
webdav.ingress.tls	Enable TLS configuration for the host defined at ingress.hostname parameter	false
webdav.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
webdav.ingress.extraHosts	An array with additional hostname(s) to be covered with the ingress record	[]
webdav.ingress.extraPaths	An array with additional arbitrary paths that may need to be added to the ingress under the main host	[]
webdav.ingress.extraTls	TLS configuration for additional hostname(s) to be covered with this ingress record	[]
webdav.ingress.secrets	Custom TLS certificates as secrets	[]
webdav.ingress.extraRules	Additional rules to be covered with this ingress record	[]

Init Container Parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup	false
volumePermissions.image.registry	OS Shell + Utility image registry	REGISTRY_NAME
volumePermissions.image.repository	OS Shell + Utility image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.pullPolicy	OS Shell + Utility image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	OS Shell + Utility image pull secrets	[]
volumePermissions.resourcesPreset	Set init container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set init container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volumePermissions.containerSecurityContext.enabled	Enabled init container’ Security Context	true
volumePermissions.containerSecurityContext.seLinuxOptions	Set SELinux options in init container	{}
volumePermissions.containerSecurityContext.runAsUser	Set init container’s Security Context runAsUser	0

Other Parameters

Name	Description	Value
serviceAccount.create	Specifies whether a ServiceAccount should be created	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	true

Database Parameters

Name	Description	Value
mariadb.enabled	Deploy a MariaDB server to satisfy the Filer server database requirements	true
mariadb.architecture	MariaDB architecture. Allowed values: standalone or replication	standalone
mariadb.auth.rootPassword	MariaDB root password	""
mariadb.auth.database	MariaDB custom database	bitnami_seaweedfs
mariadb.auth.username	MariaDB custom user name	bn_seaweedfs
mariadb.auth.password	MariaDB custom user password	""
mariadb.auth.usePasswordFiles	Mount credentials as a file instead of using an environment variable	false
mariadb.initdbScripts	Specify dictionary of scripts to be run at first boot	{}
mariadb.primary.persistence.enabled	Enable persistence on MariaDB using PVC(s)	true
mariadb.primary.persistence.storageClass	Persistent Volume storage class	""
mariadb.primary.persistence.accessModes	Persistent Volume access modes	[]
mariadb.primary.persistence.size	Persistent Volume size	8Gi
mariadb.primary.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if primary.resources is set (primary.resources is recommended for production).	micro
mariadb.primary.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
externalDatabase.enabled	Enable external database support	false
externalDatabase.store	Database store (mariadb, postgresql)	mariadb
externalDatabase.host	External Database server host	localhost
externalDatabase.port	External Database server port	3306
externalDatabase.user	External Database username	bn_seaweedfs
externalDatabase.password	External Database user password	""
externalDatabase.database	External Database database name	bitnami_seaweedfs
externalDatabase.existingSecret	The name of an existing secret with database credentials. Evaluated as a template	""

The above parameters map to the env variables defined in bitnami/seaweedfs. For more information please refer to the bitnami/seaweedfs image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set filer.enabled=true \
  --set s3.enabled=true \
    oci://REGISTRY_NAME/REPOSITORY_NAME/seaweedfs

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command enables two optional components of the SeaweedFS chart, the Filer and the Amazon S3 API.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/seaweedfs

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Upgrading

To 1.0.0

This major release bumps the MariaDB version to 11.4. Follow the upstream instructions for upgrading from MariaDB 11.3 to 11.4. No major issues are expected during the upgrade.

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.