Bitnami package for Thanos

Thanos is a highly available metrics system that can be added on top of existing Prometheus deployments, providing a global query view across all Prometheus installations.

Overview of Thanos

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/thanos

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Thanos deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/thanos

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy Thanos on the Kubernetes cluster with the default configuration. The configuration section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Architecture

This charts allows you install several Thanos components, so you deploy an architecture as the one below:

                       +--------------+                  +--------------+      +--------------+
                       | Thanos       |----------------> | Thanos Store |      | Thanos       |
                       | Query        |           |      | Gateway      |      | Compactor    |
                       +--------------+           |      +--------------+      +--------------+
                   push                           |             |                     |
+--------------+   alerts   +--------------+      |             | storages            | Downsample &
| Alertmanager | <----------| Thanos       | <----|             | query metrics       | compact blocks
| (*)          |            | Ruler        |      |             |                     |
+--------------+            +--------------+      |             \/                    |
      ^                            |              |      +----------------+           |
      | push alerts                +--------------|----> | MinIO&reg; (*) | <---------+
      |                                           |      |                |
+------------------------------+                  |      +----------------+
|+------------+  +------------+|                  |             ^
|| Prometheus |->| Thanos     || <----------------+             |
|| (*)        |<-| Sidecar (*)||    query                       | inspect
|+------------+  +------------+|    metrics                     | blocks
+------------------------------+                                |
                                                         +--------------+
                                                         | Thanos       |
                                                         | Bucket Web   |
                                                         +--------------+

Note: Components marked with (*) are provided by subchart(s) (such as the Bitnami MinIO® chart) or external charts (such as the Bitnami kube-prometheus chart).

Check the section Integrate Thanos with Prometheus and Alertmanager for detailed instructions to deploy this architecture.

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Adding extra flags

In case you want to add extra flags to any Thanos component, you can use XXX.extraFlags parameter(s), where XXX is placeholder you need to replace with the actual component(s). For instance, to add extra flags to Thanos Store Gateway, use:

storegateway:
  extraFlags:
    - --sync-block-duration=3m
    - --chunk-pool-size=2GB

This also works for multi-line flags. This can be useful when you want to configure caching for a particular component without using a configMap. For example, to configure the query-range response cache of the Thanos Query Frontend, use:

queryFrontend:
  extraFlags:
    - |
      --query-range.response-cache-config=
      type: MEMCACHED
      config:
        addresses:
          - <MEMCACHED_SERVER>:11211
        timeout: 500ms
        max_idle_connections: 100
        max_async_concurrency: 10
        max_async_buffer_size: 10000
        max_get_multi_concurrency: 100
        max_get_multi_batch_size: 0
        dns_provider_update_interval: 10s
        expiration: 24h

Using custom Objstore configuration

This helm chart supports using custom Objstore configuration.

You can specify the Objstore configuration using the objstoreConfig parameter.

In addition, you can also set an external Secret with the configuration file. This is done by setting the existingObjstoreSecret parameter. Note that this will override the previous option. If needed you can also provide a custom Secret Key with existingObjstoreSecretItems, please be aware that the Path of your Secret should be objstore.yml.

Using custom Query Service Discovery configuration

This helm chart supports using custom Service Discovery configuration for Query.

You can specify the Service Discovery configuration using the query.sdConfig parameter.

In addition, you can also set an external ConfigMap with the Service Discovery configuration file. This is done by setting the query.existingSDConfigmap parameter. Note that this will override the previous option.

Using custom Ruler configuration

This helm chart supports using custom Ruler configuration.

You can specify the Ruler configuration using the ruler.config parameter.

In addition, you can also set an external ConfigMap with the configuration file. This is done by setting the ruler.existingConfigmap parameter. Note that this will override the previous option.

Running Thanos with HTTPS and basic authentication

This helm charts supports using HTTPS and basic authentication. The underlying feature is experimental and might change in the future, so are the associated settings in the chart. For more information, please refer to Thanos documentation.

This feature can be enabled by using the following values:

• https.enabled=true. Enabling HTTPS requires the user to provide the TLS certificate and Key for Thanos, which can be done using one of the following options:

  • Provide a secret using https.existingSecret. The secret must contain the keys tls.crt or tls.key (key names can be renamed using the values https.keyFilename and https.certFilename).
  • Provide the certificate and key in your values.yaml under the values https.cert and https.key.
  • Use https.autoGenerated=true, using this value Helm will generate a self-signed key pair during the chart initialization. Not recommended for production environments.

• auth.basicAuthUsers.*. An dictionary of key / values, where the keys corresponds to the users that will have access to Thanos and the values are the plaintext passwords. Passwords will be later encrypted with bcrypt.

• Alternatively, provide your own Thanos http config file using the value httpConfig or existingHttpConfigSecret. This may cause any settings under https.* or auth.* to be ignored, except for the settings related to the TLS certificates. When providing a configuration file using these parameters, the chart Probes will fail to initialize unless one of the following fixes are applied:
  • Set https.enabled or auth.basicAuthUsers with at least one user, matching the configuration file you provided. That way Probes will be configured with HTTPS and/or basic authentication accordingly.
  • Configure your own Probes using <component>.customLivenessProbe, <component>.customReadinessProbe and <component>.customStartupProbe.
  • Not recommended. Disable the Probes.

Store time partitions

Thanos store supports partion based on time.

Setting time partitions will create N number of store statefulsets based on the number of items in the timePartitioning list. Each item must contain the min and max time for querying in the supported format (find more details at Thanos documentation).

Note: leaving the timePartitioning list empty ([]) will create a single store for all data.

For instance, to use 3 stores you can use a values.yaml like the one below:

timePartitioning:
  # One store for data older than 6 weeks
  - min: ""
    max: -6w
  # One store for data newer than 6 weeks and older than 2 weeks
  - min: -6w
    max: -2w
  # One store for data newer than 2 weeks
  - min: -2w
    max: ""

You can also specify different resources and limits configurations for each storegateway statefulset. This is done by adding a resources.requests and resources.limits to each item you wish to change, as shown below:

timePartitioning:
  # One store for data older than 6 weeks
  - min: ""
    max: -6w
  # One store for data newer than 6 weeks and older than 2 weeks
  - min: -6w
    max: -2w
    resources: #optional resources declaration for partition
      requests:
        cpu: 10m
        memory: 100Mi
      limits:
        cpu: 20m
        memory: 100Mi
  # One store for data newer than 2 weeks
  - min: -2w
    max: ""

Integrate Thanos with Prometheus and Alertmanager

You can integrate Thanos with Prometheus & Alertmanager using this chart and the Bitnami kube-prometheus chart following the steps below:

Note: in this example we will use MinIO® (subchart) as the Objstore. Every component will be deployed in the “monitoring” namespace.

• Create a values.yaml like the one below:

objstoreConfig: |-
  type: s3
  config:
    bucket: thanos
    endpoint: {{ include "thanos.minio.fullname" . }}.{{ .Release.Namespace }}.svc.cluster.local:9000
    access_key: minio
    secret_key: minio123
    insecure: true
query:
  dnsDiscovery:
    sidecarsService: kube-prometheus-prometheus-thanos
    sidecarsNamespace: monitoring
bucketweb:
  enabled: true
compactor:
  enabled: true
storegateway:
  enabled: true
ruler:
  enabled: true
  alertmanagers:
    - http://kube-prometheus-alertmanager.monitoring.svc.cluster.local:9093
  config: |-
    groups:
      - name: "metamonitoring"
        rules:
          - alert: "PrometheusDown"
            expr: absent(up{prometheus="monitoring/kube-prometheus"})
metrics:
  enabled: true
  serviceMonitor:
    enabled: true
minio:
  enabled: true
  auth:
    rootPassword: minio123
    rootUser: minio
  monitoringBuckets: thanos
  accessKey:
    password: minio
  secretKey:
    password: minio123

• Install Prometheus Operator and Thanos charts:

For Helm 3:

$ kubectl create namespace monitoring
helm install kube-prometheus \
    --set prometheus.thanos.create=true \
    --namespace monitoring \
    bitnami/kube-prometheus
helm install thanos \
    --values values.yaml \
    --namespace monitoring \
    oci://REGISTRY_NAME/REPOSITORY_NAME/thanos

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

That’s all! Now you have Thanos fully integrated with Prometheus and Alertmanager.

Deploy extra resources

There are cases where you may want to deploy extra objects, such a ConfigMap containing your app’s configuration or some extra deployment with a micro service used by your app. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter.

Setting Pod’s affinity

This chart allows you to set your custom affinity using the XXX.affinity parameter(s). Find more information about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The data is persisted by default using PVC(s) on Thanos components. You can disable the persistence setting the XXX.persistence.enabled parameter(s) to false. A default StorageClass is needed in the Kubernetes cluster to dynamically provision the volumes. Specify another StorageClass in the XXX.persistence.storageClass parameter(s) or set XXX.persistence.existingClaim if you have already existing persistent volumes to use.

Note: you need to substitute the XXX placeholders above with the actual component(s) you want to configure.

Adjust permissions of persistent volume mountpoint

As the images run as non-root by default, it is necessary to adjust the ownership of the persistent volumes so that the containers can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volumes. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volumes before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.storageClass	DEPRECATED: use global.defaultStorageClass instead	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Force target Kubernetes version (using Helm capabilities if not set)	""
nameOverride	String to partially override common.names.fullname template (will maintain the release name)	""
fullnameOverride	String to fully override common.names.fullname template	""
commonLabels	Add labels to all the deployed resources	{}
commonAnnotations	Add annotations to all the deployed resources	{}
clusterDomain	Kubernetes Cluster Domain	cluster.local
extraDeploy	Array of extra objects to deploy with the release	[]

Thanos common parameters

Name	Description	Value
image.registry	Thanos image registry	REGISTRY_NAME
image.repository	Thanos image repository	REPOSITORY_NAME/thanos
image.digest	Thanos image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
image.pullPolicy	Thanos image pull policy	IfNotPresent
image.pullSecrets	Specify docker-registry secret names as an array	[]
objstoreConfig	The objstore configuration	""
indexCacheConfig	The index cache configuration	""
bucketCacheConfig	The bucket cache configuration	""
existingObjstoreSecret	Secret with Objstore Configuration	""
existingObjstoreSecretItems	Optional item list for specifying a custom Secret key. If so, path should be objstore.yml	[]
httpConfig	The https and basic auth configuration	""
existingHttpConfigSecret	Secret containing the HTTPS and Basic auth configuration	""
https.enabled	Set to true to enable HTTPS. Requires a secret containing the certificate and key.	false
https.autoGenerated	Create self-signed TLS certificates.	false
https.existingSecret	Existing secret containing your own server key and certificate	""
https.certFilename		tls.crt
https.keyFilename		tls.key
https.caFilename		ca.crt
https.key	TLS Key for Thanos HTTPS - ignored if existingSecret is provided	""
https.cert	TLS Certificate for Thanos HTTPS - ignored if existingSecret is provided	""
https.ca	(Optional, used for client) CA Certificate for Thanos HTTPS - ignored if existingSecret is provided	""
https.clientAuthType	Server policy for client authentication using certificates. Maps to ClientAuth Policies.	""
https.extraTlsServerConfig	Extra tls_server_config options	{}
auth.basicAuthUsers	Object containing : key-value pairs for each user that will have access via basic authentication	{}

Thanos Query parameters

Name	Description	Value
query.enabled	Set to true to enable Thanos Query component	true
query.logLevel	Thanos Query log level	info
query.logFormat	Thanos Query log format	logfmt
query.replicaLabel	Replica indicator(s) along which data is de-duplicated	["replica"]
query.dnsDiscovery.enabled	Enable store APIs discovery via DNS	true
query.dnsDiscovery.sidecarsService	Sidecars service name to discover them using DNS discovery	""
query.dnsDiscovery.sidecarsNamespace	Sidecars namespace to discover them using DNS discovery	""
query.stores	Statically configure store APIs to connect with Thanos Query	[]
query.sdConfig	Query Service Discovery Configuration	""
query.existingSDConfigmap	Name of existing ConfigMap with Ruler configuration	""
query.extraEnvVars	Extra environment variables for Thanos Query container	[]
query.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Query nodes	""
query.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Query nodes	""
query.extraFlags	Extra Flags to passed to Thanos Query	[]
query.command	Override default container command (useful when using custom images)	[]
query.args	Override default container args (useful when using custom images)	[]
query.replicaCount	Number of Thanos Query replicas to deploy	1
query.revisionHistoryLimit	The number of old history to retain to allow rollback	10
query.updateStrategy.type	Update strategy type for Thanos Query replicas	RollingUpdate
query.containerPorts.http	HTTP container port	10902
query.containerPorts.grpc	HTTP container port	10901
query.podSecurityContext.enabled	Enable security context for the Thanos Query pods	true
query.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
query.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
query.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
query.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Query pods	1001
query.containerSecurityContext.enabled	Enabled containers’ Security Context	true
query.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
query.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
query.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
query.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
query.containerSecurityContext.privileged	Set container’s Security Context privileged	false
query.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
query.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
query.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
query.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
query.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if query.resources is set (query.resources is recommended for production).	nano
query.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
query.livenessProbe.enabled	Enable livenessProbe on Thanos Query containers	true
query.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
query.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
query.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
query.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
query.livenessProbe.successThreshold	Success threshold for livenessProbe	1
query.readinessProbe.enabled	Enable readinessProbe on Thanos Query containers	true
query.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
query.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
query.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
query.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
query.readinessProbe.successThreshold	Success threshold for readinessProbe	1
query.startupProbe.enabled	Enable startupProbe on Thanos Query containers	false
query.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
query.startupProbe.periodSeconds	Period seconds for startupProbe	5
query.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
query.startupProbe.failureThreshold	Failure threshold for startupProbe	15
query.startupProbe.successThreshold	Success threshold for startupProbe	1
query.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
query.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
query.customStartupProbe	Custom startupProbe that overrides the default one	{}
query.initContainers	Add additional init containers to the Thanos Query pods	[]
query.sidecars	Extra containers running as sidecars to Thanos Query pods	[]
query.extraVolumes	Extra volumes to add to Thanos Query	[]
query.extraVolumeMounts	Extra volume mounts to add to the query container	[]
query.podAffinityPreset	Thanos Query pod affinity preset	""
query.podAntiAffinityPreset	Thanos Query pod anti-affinity preset. Ignored if query.affinity is set. Allowed values: soft or hard	soft
query.podAntiAffinityPresetTopologyKey	Thanos Query pod anti-affinity topologyKey. Ignored if query.affinity is set.	""
query.nodeAffinityPreset.type	Thanos Query node affinity preset type. Ignored if query.affinity is set. Allowed values: soft or hard	""
query.nodeAffinityPreset.key	Thanos Query node label key to match Ignored if query.affinity is set.	""
query.nodeAffinityPreset.values	Thanos Query node label values to match. Ignored if query.affinity is set.	[]
query.affinity	Thanos Query affinity for pod assignment	{}
query.nodeSelector	Thanos Query node labels for pod assignment	{}
query.tolerations	Thanos Query tolerations for pod assignment	[]
query.podLabels	Thanos Query pod labels	{}
query.podAnnotations	Annotations for Thanos Query pods	{}
query.dnsConfig	Deployment pod DNS config	{}
query.dnsPolicy	Deployment pod DNS policy	""
query.hostAliases	Deployment pod host aliases	[]
query.lifecycleHooks	for the Thanos Query container(s) to automate configuration before or after startup	{}
query.priorityClassName	Thanos Query priorityClassName	""
query.schedulerName	Name of the k8s scheduler (other than default) for Thanos Query pods	""
query.topologySpreadConstraints	Topology Spread Constraints for Thanos Query pods assignment spread across your cluster among failure-domains	[]
query.grpc.server.tls.enabled	Enable TLS encryption in the GRPC server	false
query.grpc.server.tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates	false
query.grpc.server.tls.cert	TLS Certificate for GRPC server - ignored if existingSecret is provided	""
query.grpc.server.tls.key	TLS Key for GRPC server - ignored if existingSecret is provided	""
query.grpc.server.tls.ca	TLS CA to verify clients against - ignored if existingSecret is provided	""
query.grpc.server.tls.clientAuthEnabled	Enable TLS client verification against provided CA	true
query.grpc.server.tls.existingSecret	Existing secret containing your own TLS certificates	{}
query.grpc.client.serverName	Server name to verify the hostname on the returned GRPC certificates	""
query.grpc.client.tls.enabled	Enable TLS encryption in the GRPC server	false
query.grpc.client.tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates	false
query.grpc.client.tls.cert	TLS Certificate for GRPC server - ignored if existingSecret is provided	""
query.grpc.client.tls.key	TLS Key for GRPC server - ignored if existingSecret is provided	""
query.grpc.client.tls.ca	TLS CA to verify clients against - ignored if existingSecret is provided	""
query.grpc.client.tls.existingSecret	Existing secret containing your own TLS certificates	{}
query.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
query.networkPolicy.allowExternal	Don’t require client label for connections	true
query.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
query.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
query.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
query.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
query.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
query.service.type	Kubernetes service type	ClusterIP
query.service.ports.http	Thanos Query service HTTP port	9090
query.service.nodePorts.http	Specify the Thanos Query HTTP nodePort value for the LoadBalancer and NodePort service types	""
query.service.clusterIP	Thanos Query service clusterIP IP	""
query.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
query.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
query.service.externalTrafficPolicy	Thanos Query service externalTrafficPolicy	Cluster
query.service.labels	Labels for Thanos Query service	{}
query.service.annotations	Annotations for Thanos Query service	{}
query.service.extraPorts	Extra ports to expose in the Thanos Query service	[]
query.service.labelSelectorsOverride	Selector for Thanos Query service	{}
query.service.additionalHeadless	Additional Headless service	false
query.service.headless.annotations	Annotations for the headless service.	{}
query.serviceGrpc.type	Kubernetes service type	ClusterIP
query.serviceGrpc.ports.grpc	Thanos Query service GRPC port	10901
query.serviceGrpc.nodePorts.grpc	Specify the Thanos Query GRPC nodePort value for the LoadBalancer and NodePort service types	""
query.serviceGrpc.clusterIP	Thanos Query service clusterIP IP	""
query.serviceGrpc.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
query.serviceGrpc.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
query.serviceGrpc.externalTrafficPolicy	Thanos Query service externalTrafficPolicy	Cluster
query.serviceGrpc.labels	Labels for Thanos Query service GRPC	{}
query.serviceGrpc.annotations	Annotations for Thanos Query service	{}
query.serviceGrpc.extraPorts	Extra ports to expose in the Thanos Query service	[]
query.serviceGrpc.labelSelectorsOverride	Selector for Thanos Query service	{}
query.serviceGrpc.additionalHeadless	Additional Headless service	false
query.serviceGrpc.headless.annotations	Annotations for the headless service.	{}
query.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the deployment	true
query.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
query.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
query.serviceAccount.annotations	Annotations for Thanos Query Service Account	{}
query.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
query.rbac.create	Create a ClusterRole and ClusterRoleBinding for the Thanos Query Service Account	false
query.rbac.rules	Custom RBAC rules to set	[]
query.pspEnabled	Whether to create a PodSecurityPolicy for Thanos Query	false
query.autoscaling.enabled	Enable autoscaling for Thanos Query	false
query.autoscaling.minReplicas	Minimum number of Thanos Query replicas	""
query.autoscaling.maxReplicas	Maximum number of Thanos Query replicas	""
query.autoscaling.targetCPU	Target CPU utilization percentage	""
query.autoscaling.targetMemory	Target Memory utilization percentage	""
query.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Query	true
query.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
query.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
query.ingress.enabled	Enable ingress controller resource	false
query.ingress.hostname	Default host for the ingress resource	thanos.local
query.ingress.secretName	Custom secretName for the ingress resource	""
query.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
query.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
query.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
query.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
query.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
query.ingress.extraRules	Additional rules to be covered with this ingress record	[]
query.ingress.tls	Enable TLS configuration for the hostname defined at query.ingress.hostname parameter	false
query.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
query.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
query.ingress.path	Ingress path	/
query.ingress.pathType	Ingress path type	ImplementationSpecific
query.ingress.grpc.enabled	Enable ingress controller resource (GRPC)	false
query.ingress.grpc.hostname	Default host for the ingress resource (GRPC)	thanos-grpc.local
query.ingress.grpc.secretName	Custom secretName for the ingress resource (GRPC)	""
query.ingress.grpc.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
query.ingress.grpc.annotations	Additional annotations for the Ingress resource (GRPC). To enable certificate autogeneration, place here your cert-manager annotations.	{}
query.ingress.grpc.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
query.ingress.grpc.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
query.ingress.grpc.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
query.ingress.grpc.extraRules	Additional rules to be covered with this ingress record	[]
query.ingress.grpc.tls	Enable TLS configuration for the hostname defined at query.ingress.grpc.hostname parameter	false
query.ingress.grpc.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
query.ingress.grpc.apiVersion	Override API Version (automatically detected if not set)	""
query.ingress.grpc.path	Ingress Path	/
query.ingress.grpc.pathType	Ingress Path type	ImplementationSpecific

Thanos Query Frontend parameters

Name	Description	Value
queryFrontend.enabled	Enable/disable Thanos Query Frontend component	true
queryFrontend.logLevel	Thanos Query Frontend log level	info
queryFrontend.logFormat	Thanos Query Frontend log format	logfmt
queryFrontend.config	Thanos Query Frontend configuration	""
queryFrontend.existingConfigmap	Name of existing ConfigMap with Thanos Query Frontend configuration	""
queryFrontend.extraEnvVars	Extra environment variables for Thanos Query Frontend container	[]
queryFrontend.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Query Frontend nodes	""
queryFrontend.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Query Frontend nodes	""
queryFrontend.extraFlags	Extra Flags to passed to Thanos Query Frontend	[]
queryFrontend.command	Override default container command (useful when using custom images)	[]
queryFrontend.args	Override default container args (useful when using custom images)	[]
queryFrontend.replicaCount	Number of Thanos Query Frontend replicas to deploy	1
queryFrontend.revisionHistoryLimit	The number of old history to retain to allow rollback	10
queryFrontend.updateStrategy.type	Update strategy type for Thanos Query Frontend replicas	RollingUpdate
queryFrontend.containerPorts.http	HTTP container port	9090
queryFrontend.podSecurityContext.enabled	Enable security context for the Thanos Query Frontend pods	true
queryFrontend.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
queryFrontend.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
queryFrontend.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
queryFrontend.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Query Frontend pods	1001
queryFrontend.containerSecurityContext.enabled	Enabled containers’ Security Context	true
queryFrontend.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
queryFrontend.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
queryFrontend.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
queryFrontend.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
queryFrontend.containerSecurityContext.privileged	Set container’s Security Context privileged	false
queryFrontend.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
queryFrontend.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
queryFrontend.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
queryFrontend.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
queryFrontend.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if queryFrontend.resources is set (queryFrontend.resources is recommended for production).	nano
queryFrontend.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
queryFrontend.livenessProbe.enabled	Enable livenessProbe on Thanos Query Frontend containers	true
queryFrontend.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
queryFrontend.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
queryFrontend.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
queryFrontend.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
queryFrontend.livenessProbe.successThreshold	Success threshold for livenessProbe	1
queryFrontend.readinessProbe.enabled	Enable readinessProbe on Thanos Query Frontend containers	true
queryFrontend.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
queryFrontend.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
queryFrontend.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
queryFrontend.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
queryFrontend.readinessProbe.successThreshold	Success threshold for readinessProbe	1
queryFrontend.startupProbe.enabled	Enable startupProbe on Thanos Query Frontend containers	false
queryFrontend.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
queryFrontend.startupProbe.periodSeconds	Period seconds for startupProbe	5
queryFrontend.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
queryFrontend.startupProbe.failureThreshold	Failure threshold for startupProbe	15
queryFrontend.startupProbe.successThreshold	Success threshold for startupProbe	1
queryFrontend.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
queryFrontend.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
queryFrontend.customStartupProbe	Custom startupProbe that overrides the default one	{}
queryFrontend.initContainers	Add additional init containers to the Thanos Query Frontend pods	[]
queryFrontend.sidecars	Extra containers running as sidecars to Thanos Query Frontend pods	[]
queryFrontend.extraVolumes	Extra volumes to add to Thanos Query Frontend	[]
queryFrontend.extraVolumeMounts	Extra volume mounts to add to the query-frontend container	[]
queryFrontend.podAffinityPreset	Thanos Query Frontend pod affinity preset	""
queryFrontend.podAntiAffinityPreset	Thanos Query Frontend pod anti-affinity preset. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	soft
queryFrontend.nodeAffinityPreset.type	Thanos Query Frontend node affinity preset type. Ignored if queryFrontend.affinity is set. Allowed values: soft or hard	""
queryFrontend.nodeAffinityPreset.key	Thanos Query Frontend node label key to match. Ignored if queryFrontend.affinity is set.	""
queryFrontend.nodeAffinityPreset.values	Thanos Query Frontend node label values to match. Ignored if queryFrontend.affinity is set.	[]
queryFrontend.affinity	Thanos Query Frontend affinity for pod assignment	{}
queryFrontend.nodeSelector	Thanos Query Frontend node labels for pod assignment	{}
queryFrontend.tolerations	Thanos Query Frontend tolerations for pod assignment	[]
queryFrontend.podLabels	Thanos Query Frontend pod labels	{}
queryFrontend.podAnnotations	Annotations for Thanos Query Frontend pods	{}
queryFrontend.dnsConfig	Deployment pod DNS config	{}
queryFrontend.dnsPolicy	Deployment pod DNS policy	""
queryFrontend.hostAliases	Deployment pod host aliases	[]
queryFrontend.lifecycleHooks	for the Thanos Query Frontend container(s) to automate configuration before or after startup	{}
queryFrontend.priorityClassName	Thanos Query Frontend priorityClassName	""
queryFrontend.schedulerName	Name of the k8s scheduler (other than default) for Thanos Query Frontend pods	""
queryFrontend.topologySpreadConstraints	Topology Spread Constraints for Thanos Query Frontend pods assignment spread across your cluster among failure-domains	[]
queryFrontend.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
queryFrontend.networkPolicy.allowExternal	Don’t require client label for connections	true
queryFrontend.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
queryFrontend.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
queryFrontend.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
queryFrontend.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
queryFrontend.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
queryFrontend.service.type	Kubernetes service type	ClusterIP
queryFrontend.service.ports.http	Thanos Query Frontend service HTTP port	9090
queryFrontend.service.nodePorts.http	Specify the Thanos Query Frontend HTTP nodePort value for the LoadBalancer and NodePort service types	""
queryFrontend.service.clusterIP	Thanos Query Frontend service clusterIP IP	""
queryFrontend.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
queryFrontend.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
queryFrontend.service.externalTrafficPolicy	Thanos Query Frontend service externalTrafficPolicy	Cluster
queryFrontend.service.annotations	Annotations for Thanos Query Frontend service	{}
queryFrontend.service.labels	Labels for Thanos Query Frontend service	{}
queryFrontend.service.extraPorts	Extra ports to expose in the Thanos Query Frontend service	[]
queryFrontend.service.labelSelectorsOverride	Selector for Thanos Query service	{}
queryFrontend.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the deployment	true
queryFrontend.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
queryFrontend.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
queryFrontend.serviceAccount.annotations	Annotations for Thanos Query Frontend Service Account	{}
queryFrontend.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
queryFrontend.rbac.create	Create a ClusterRole and ClusterRoleBinding for the Thanos Query Frontend Service Account	false
queryFrontend.rbac.rules	Custom RBAC rules to set	[]
queryFrontend.pspEnabled	Whether to create a PodSecurityPolicy for Thanos Query Frontend	false
queryFrontend.autoscaling.enabled	Enable autoscaling for Thanos Query Frontend	false
queryFrontend.autoscaling.minReplicas	Minimum number of Thanos Query Frontend replicas	""
queryFrontend.autoscaling.maxReplicas	Maximum number of Thanos Query Frontend replicas	""
queryFrontend.autoscaling.targetCPU	Target CPU utilization percentage	""
queryFrontend.autoscaling.targetMemory	Target Memory utilization percentage	""
queryFrontend.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Query Frontend	true
queryFrontend.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
queryFrontend.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
queryFrontend.ingress.enabled	Enable ingress controller resource	false
queryFrontend.ingress.hostname	Default host for the ingress resource	thanos.local
queryFrontend.ingress.overrideAlertQueryURL	Automatically use query-frontend’s ingress hostname as –alert.queryURL for both Query and Ruler.	true
queryFrontend.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
queryFrontend.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
queryFrontend.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
queryFrontend.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
queryFrontend.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
queryFrontend.ingress.extraRules	Additional rules to be covered with this ingress record	[]
queryFrontend.ingress.tls	Enable TLS configuration for the hostname defined at queryFrontend.ingress.hostname parameter	false
queryFrontend.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
queryFrontend.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
queryFrontend.ingress.path	Ingress path	/
queryFrontend.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Bucket Web parameters

Name	Description	Value
bucketweb.enabled	Enable/disable Thanos Bucket Web component	false
bucketweb.logLevel	Thanos Bucket Web log level	info
bucketweb.logFormat	Thanos Bucket Web log format	logfmt
bucketweb.refresh	Refresh interval to download metadata from remote storage	30m
bucketweb.timeout	Timeout to download metadata from remote storage	5m
bucketweb.extraEnvVars	Extra environment variables for Thanos Bucket Web container	[]
bucketweb.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Bucket Web nodes	""
bucketweb.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Bucket Web nodes	""
bucketweb.extraFlags	Extra Flags to passed to Thanos Bucket Web	[]
bucketweb.command	Override default container command (useful when using custom images)	[]
bucketweb.args	Override default container args (useful when using custom images)	[]
bucketweb.replicaCount	Number of Thanos Bucket Web replicas to deploy	1
bucketweb.revisionHistoryLimit	The number of old history to retain to allow rollback	10
bucketweb.updateStrategy.type	Update strategy type for Thanos Bucket Web replicas	RollingUpdate
bucketweb.containerPorts.http	HTTP container port	8080
bucketweb.podSecurityContext.enabled	Enable security context for the Thanos Bucket Web pods	true
bucketweb.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
bucketweb.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
bucketweb.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
bucketweb.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Bucket Web pods	1001
bucketweb.containerSecurityContext.enabled	Enabled containers’ Security Context	true
bucketweb.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
bucketweb.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
bucketweb.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
bucketweb.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
bucketweb.containerSecurityContext.privileged	Set container’s Security Context privileged	false
bucketweb.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
bucketweb.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
bucketweb.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
bucketweb.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
bucketweb.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if bucketweb.resources is set (bucketweb.resources is recommended for production).	nano
bucketweb.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
bucketweb.livenessProbe.enabled	Enable livenessProbe on Thanos Bucket Web containers	true
bucketweb.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
bucketweb.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
bucketweb.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
bucketweb.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
bucketweb.livenessProbe.successThreshold	Success threshold for livenessProbe	1
bucketweb.readinessProbe.enabled	Enable readinessProbe on Thanos Bucket Web containers	true
bucketweb.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
bucketweb.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
bucketweb.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
bucketweb.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
bucketweb.readinessProbe.successThreshold	Success threshold for readinessProbe	1
bucketweb.startupProbe.enabled	Enable startupProbe on Thanos Bucket Web containers	false
bucketweb.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
bucketweb.startupProbe.periodSeconds	Period seconds for startupProbe	5
bucketweb.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
bucketweb.startupProbe.failureThreshold	Failure threshold for startupProbe	15
bucketweb.startupProbe.successThreshold	Success threshold for startupProbe	1
bucketweb.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
bucketweb.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
bucketweb.customStartupProbe	Custom startupProbe that overrides the default one	{}
bucketweb.initContainers	Add additional init containers to the Thanos Bucket Web pods	[]
bucketweb.sidecars	Extra containers running as sidecars to Thanos Bucket Web pods	[]
bucketweb.extraVolumes	Extra volumes to add to Bucket Web	[]
bucketweb.extraVolumeMounts	Extra volume mounts to add to the bucketweb container	[]
bucketweb.podAffinityPreset	Thanos Bucket Web pod affinity preset	""
bucketweb.podAntiAffinityPreset	Thanos Bucket Web pod anti-affinity preset. Ignored if bucketweb.affinity is set. Allowed values: soft or hard	soft
bucketweb.nodeAffinityPreset.type	Thanos Bucket Web node affinity preset type. Ignored if bucketweb.affinity is set. Allowed values: soft or hard	""
bucketweb.nodeAffinityPreset.key	Thanos Bucket Web node label key to match. Ignored if bucketweb.affinity is set.	""
bucketweb.nodeAffinityPreset.values	Thanos Bucket Web node label values to match. Ignored if bucketweb.affinity is set.	[]
bucketweb.affinity	Thanos Bucket Web affinity for pod assignment	{}
bucketweb.nodeSelector	Thanos Bucket Web node labels for pod assignment	{}
bucketweb.tolerations	Thanos Bucket Web tolerations for pod assignment	[]
bucketweb.podLabels	Thanos Bucket Web pod labels	{}
bucketweb.podAnnotations	Annotations for Thanos Bucket Web pods	{}
bucketweb.dnsConfig	Deployment pod DNS config	{}
bucketweb.dnsPolicy	Deployment pod DNS policy	""
bucketweb.hostAliases	Deployment pod host aliases	[]
bucketweb.lifecycleHooks	for the Thanos Bucket Web container(s) to automate configuration before or after startup	{}
bucketweb.priorityClassName	Thanos Bucket Web priorityClassName	""
bucketweb.schedulerName	Name of the k8s scheduler (other than default) for Thanos Bucket Web pods	""
bucketweb.topologySpreadConstraints	Topology Spread Constraints for Thanos Bucket Web pods assignment spread across your cluster among failure-domains	[]
bucketweb.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
bucketweb.networkPolicy.allowExternal	Don’t require client label for connections	true
bucketweb.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
bucketweb.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
bucketweb.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
bucketweb.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
bucketweb.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
bucketweb.service.type	Kubernetes service type	ClusterIP
bucketweb.service.ports.http	Thanos Bucket Web service HTTP port	8080
bucketweb.service.nodePorts.http	Specify the Thanos Bucket Web HTTP nodePort value for the LoadBalancer and NodePort service types	""
bucketweb.service.clusterIP	Thanos Bucket Web service clusterIP IP	""
bucketweb.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
bucketweb.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
bucketweb.service.externalTrafficPolicy	Thanos Bucket Web service externalTrafficPolicy	Cluster
bucketweb.service.labels	Extra labels for Thanos Bucket Web service	{}
bucketweb.service.annotations	Annotations for Thanos Bucket Web service	{}
bucketweb.service.extraPorts	Extra ports to expose in the Thanos Bucket Web service	[]
bucketweb.service.labelSelectorsOverride	Selector for Thanos Query service	{}
bucketweb.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the deployment	true
bucketweb.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
bucketweb.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
bucketweb.serviceAccount.annotations	Annotations for Thanos Bucket Web Service Account	{}
bucketweb.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
bucketweb.autoscaling.enabled	Enable autoscaling for Thanos Bucket Web	false
bucketweb.autoscaling.minReplicas	Minimum number of Thanos Bucket Web replicas	""
bucketweb.autoscaling.maxReplicas	Maximum number of Thanos Bucket Web replicas	""
bucketweb.autoscaling.targetCPU	Target CPU utilization percentage	""
bucketweb.autoscaling.targetMemory	Target Memory utilization percentage	""
bucketweb.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Bucket Web	true
bucketweb.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
bucketweb.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
bucketweb.ingress.enabled	Enable ingress controller resource	false
bucketweb.ingress.hostname	Default host for the ingress resource	thanos-bucketweb.local
bucketweb.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
bucketweb.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
bucketweb.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
bucketweb.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
bucketweb.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
bucketweb.ingress.extraRules	Additional rules to be covered with this ingress record	[]
bucketweb.ingress.tls	Enable TLS configuration for the hostname defined at bucketweb.ingress.hostname parameter	false
bucketweb.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
bucketweb.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
bucketweb.ingress.path	Ingress path	/
bucketweb.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Compactor parameters

Name	Description	Value
compactor.enabled	Enable/disable Thanos Compactor component	false
compactor.logLevel	Thanos Compactor log level	info
compactor.logFormat	Thanos Compactor log format	logfmt
compactor.retentionResolutionRaw	Resolution and Retention flag	30d
compactor.retentionResolution5m	Resolution and Retention flag	30d
compactor.retentionResolution1h	Resolution and Retention flag	10y
compactor.consistencyDelay	Minimum age of fresh (non-compacted) blocks before they are being processed	30m
compactor.extraEnvVars	Extra environment variables for Thanos Compactor container	[]
compactor.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Compactor nodes	""
compactor.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Compactor nodes	""
compactor.extraFlags	Extra Flags to passed to Thanos Compactor	[]
compactor.command	Override default container command (useful when using custom images)	[]
compactor.args	Override default container args (useful when using custom images)	[]
compactor.revisionHistoryLimit	The number of old history to retain to allow rollback	10
compactor.cronJob.enabled	Run compactor as a CronJob rather than a Deployment	false
compactor.cronJob.schedule	The schedule in Cron format, see https://en.wikipedia.org/wiki/Cron	0 */6 * * *
compactor.cronJob.timeZone	The time zone name for the given schedule, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones	""
compactor.cronJob.concurrencyPolicy	Specifies how to treat concurrent executions of a Job	Forbid
compactor.cronJob.startingDeadlineSeconds	Optional deadline in seconds for starting the job if it misses scheduled time for any reason	""
compactor.cronJob.suspend	This flag tells the controller to suspend subsequent executions	""
compactor.cronJob.successfulJobsHistoryLimit	The number of successful finished jobs to retain	""
compactor.cronJob.failedJobsHistoryLimit	The number of failed finished jobs to retain	""
compactor.cronJob.backoffLimit	The number of retries before marking this job failed	""
compactor.cronJob.ttlSecondsAfterFinished	The maximum retention before removing the job	""
compactor.restartPolicy	Compactor container restart policy.	""
compactor.updateStrategy.type	Update strategy type for Thanos Compactor replicas	Recreate
compactor.containerPorts.http	HTTP container port	10902
compactor.podSecurityContext.enabled	Enable security context for the Thanos Compactor pods	true
compactor.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
compactor.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
compactor.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
compactor.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Compactor pods	1001
compactor.containerSecurityContext.enabled	Enabled containers’ Security Context	true
compactor.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
compactor.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
compactor.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
compactor.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
compactor.containerSecurityContext.privileged	Set container’s Security Context privileged	false
compactor.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
compactor.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
compactor.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
compactor.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
compactor.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if compactor.resources is set (compactor.resources is recommended for production).	nano
compactor.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
compactor.livenessProbe.enabled	Enable livenessProbe on Thanos Compactor containers	true
compactor.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
compactor.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
compactor.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
compactor.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
compactor.livenessProbe.successThreshold	Success threshold for livenessProbe	1
compactor.readinessProbe.enabled	Enable readinessProbe on Thanos Compactor containers	true
compactor.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
compactor.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
compactor.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
compactor.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
compactor.readinessProbe.successThreshold	Success threshold for readinessProbe	1
compactor.startupProbe.enabled	Enable startupProbe on Thanos Compactor containers	false
compactor.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
compactor.startupProbe.periodSeconds	Period seconds for startupProbe	5
compactor.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
compactor.startupProbe.failureThreshold	Failure threshold for startupProbe	15
compactor.startupProbe.successThreshold	Success threshold for startupProbe	1
compactor.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
compactor.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
compactor.customStartupProbe	Custom startupProbe that overrides the default one	{}
compactor.initContainers	Add additional init containers to the Thanos Compactor pods	[]
compactor.sidecars	Extra containers running as sidecars to Thanos Compactor pods	[]
compactor.extraVolumes	Extra volumes to add to Thanos Compactor	[]
compactor.extraVolumeMounts	Extra volume mounts to add to the compactor container	[]
compactor.podAffinityPreset	Thanos Compactor pod affinity preset	""
compactor.podAntiAffinityPreset	Thanos Compactor pod anti-affinity preset. Ignored if compactor.affinity is set. Allowed values: soft or hard	soft
compactor.nodeAffinityPreset.type	Thanos Compactor node affinity preset type. Ignored if compactor.affinity is set. Allowed values: soft or hard	""
compactor.nodeAffinityPreset.key	Thanos Compactor node label key to match. Ignored if compactor.affinity is set.	""
compactor.nodeAffinityPreset.values	Thanos Compactor node label values to match. Ignored if compactor.affinity is set.	[]
compactor.affinity	Thanos Compactor affinity for pod assignment	{}
compactor.nodeSelector	Thanos Compactor node labels for pod assignment	{}
compactor.tolerations	Thanos Compactor tolerations for pod assignment	[]
compactor.podLabels	Thanos Compactor pod labels	{}
compactor.podAnnotations	Annotations for Thanos Compactor pods	{}
compactor.dnsConfig	Deployment pod DNS config	{}
compactor.dnsPolicy	Deployment pod DNS policy	""
compactor.hostAliases	Deployment pod host aliases	[]
compactor.lifecycleHooks	for the Thanos Compactor container(s) to automate configuration before or after startup	{}
compactor.priorityClassName	Thanos Compactor priorityClassName	""
compactor.schedulerName	Name of the k8s scheduler (other than default) for Thanos Compactor pods	""
compactor.topologySpreadConstraints	Topology Spread Constraints for Thanos Compactor pods assignment spread across your cluster among failure-domains	[]
compactor.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
compactor.networkPolicy.allowExternal	Don’t require client label for connections	true
compactor.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
compactor.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
compactor.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
compactor.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
compactor.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
compactor.service.type	Kubernetes service type	ClusterIP
compactor.service.ports.http	Thanos Compactor service HTTP port	9090
compactor.service.nodePorts.http	Specify the Thanos Compactor HTTP nodePort value for the LoadBalancer and NodePort service types	""
compactor.service.clusterIP	Thanos Compactor service clusterIP IP	""
compactor.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
compactor.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
compactor.service.externalTrafficPolicy	Thanos Compactor service externalTrafficPolicy	Cluster
compactor.service.labels	Labels for Thanos Compactor service	{}
compactor.service.annotations	Annotations for Thanos Compactor service	{}
compactor.service.extraPorts	Extra ports to expose in the Thanos Compactor service	[]
compactor.service.labelSelectorsOverride	Selector for Thanos Query service	{}
compactor.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the deployment	true
compactor.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
compactor.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
compactor.serviceAccount.annotations	Annotations for Thanos Compactor Service Account	{}
compactor.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
compactor.ingress.enabled	Enable ingress controller resource	false
compactor.ingress.hostname	Default host for the ingress resource	thanos-compactor.local
compactor.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
compactor.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
compactor.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
compactor.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
compactor.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
compactor.ingress.extraRules	Additional rules to be covered with this ingress record	[]
compactor.ingress.tls	Enable TLS configuration for the hostname defined at compactor.ingress.hostname parameter	false
compactor.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
compactor.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
compactor.ingress.path	Ingress path	/
compactor.ingress.pathType	Ingress path type	ImplementationSpecific
compactor.persistence.enabled	Enable data persistence using PVC(s) on Thanos Compactor pods	true
compactor.persistence.ephemeral	Use ephemeral volume for data persistence using PVC(s) on Thanos Compactor pods	false
compactor.persistence.defaultEmptyDir	Defaults to emptyDir if persistence is disabled.	true
compactor.persistence.storageClass	Specify the storageClass used to provision the volume	""
compactor.persistence.accessModes	PVC Access Modes for data volume	["ReadWriteOnce"]
compactor.persistence.size	PVC Storage Request for data volume	8Gi
compactor.persistence.labels	Labels for the PVC	{}
compactor.persistence.annotations	Annotations for the PVC	{}
compactor.persistence.existingClaim	Name of an existing PVC to use	""

Thanos Store Gateway parameters

Name	Description	Value
storegateway.enabled	Enable/disable Thanos Store Gateway component	false
storegateway.logLevel	Thanos Store Gateway log level	info
storegateway.logFormat	Thanos Store Gateway log format	logfmt
storegateway.useEndpointGroup	Specify whether to use endpoint-group when querying the Store API of HA Store Gateway replicas	false
storegateway.config	Thanos Store Gateway configuration	""
storegateway.existingConfigmap	Name of existing ConfigMap with Thanos Store Gateway configuration	""
storegateway.grpc.server.tls.enabled	Enable TLS encryption in the GRPC server	false
storegateway.grpc.server.tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates	false
storegateway.grpc.server.tls.cert	TLS Certificate for GRPC server - ignored if existingSecret is provided	""
storegateway.grpc.server.tls.key	TLS Key for GRPC server - ignored if existingSecret is provided	""
storegateway.grpc.server.tls.ca	TLS CA to verify clients against - ignored if existingSecret is provided	""
storegateway.grpc.server.tls.clientAuthEnabled	Enable TLS client verification against provided CA	true
storegateway.grpc.server.tls.existingSecret	Existing secret containing your own TLS certificates	{}
storegateway.extraEnvVars	Extra environment variables for Thanos Store Gateway container	[]
storegateway.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Store Gateway nodes	""
storegateway.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Store Gateway nodes	""
storegateway.extraFlags	Extra Flags to passed to Thanos Store Gateway	[]
storegateway.command	Override default container command (useful when using custom images)	[]
storegateway.args	Override default container args (useful when using custom images)	[]
storegateway.replicaCount	Number of Thanos Store Gateway replicas to deploy	1
storegateway.revisionHistoryLimit	The number of old history to retain to allow rollback	10
storegateway.updateStrategy.type	Update strategy type for Thanos Store Gateway replicas	RollingUpdate
storegateway.podManagementPolicy	Statefulset Pod management policy: OrderedReady (default) or Parallel	OrderedReady
storegateway.containerPorts.http	HTTP container port	10902
storegateway.containerPorts.grpc	GRPC container port	10901
storegateway.podSecurityContext.enabled	Enable security context for the Thanos Store Gateway pods	true
storegateway.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
storegateway.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
storegateway.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
storegateway.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Store Gateway pods	1001
storegateway.containerSecurityContext.enabled	Enabled containers’ Security Context	true
storegateway.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
storegateway.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
storegateway.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
storegateway.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
storegateway.containerSecurityContext.privileged	Set container’s Security Context privileged	false
storegateway.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
storegateway.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
storegateway.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
storegateway.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
storegateway.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if storegateway.resources is set (storegateway.resources is recommended for production).	nano
storegateway.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
storegateway.livenessProbe.enabled	Enable livenessProbe on Thanos Store Gateway containers	true
storegateway.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
storegateway.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
storegateway.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
storegateway.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
storegateway.livenessProbe.successThreshold	Success threshold for livenessProbe	1
storegateway.readinessProbe.enabled	Enable readinessProbe on Thanos Store Gateway containers	true
storegateway.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
storegateway.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
storegateway.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
storegateway.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
storegateway.readinessProbe.successThreshold	Success threshold for readinessProbe	1
storegateway.startupProbe.enabled	Enable startupProbe on Thanos Store Gateway containers	false
storegateway.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
storegateway.startupProbe.periodSeconds	Period seconds for startupProbe	5
storegateway.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
storegateway.startupProbe.failureThreshold	Failure threshold for startupProbe	15
storegateway.startupProbe.successThreshold	Success threshold for startupProbe	1
storegateway.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
storegateway.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
storegateway.customStartupProbe	Custom startupProbe that overrides the default one	{}
storegateway.initContainers	Add additional init containers to the Thanos Store Gateway pods	[]
storegateway.sidecars	Extra containers running as sidecars to Thanos Store Gateway pods	[]
storegateway.extraVolumes	Extra volumes to add to Thanos Store Gateway	[]
storegateway.extraVolumeMounts	Extra volume mounts to add to the storegateway container	[]
storegateway.podAffinityPreset	Thanos Store Gateway pod affinity preset	""
storegateway.podAntiAffinityPreset	Thanos Store Gateway pod anti-affinity preset. Ignored if storegateway.affinity is set. Allowed values: soft or hard	soft
storegateway.nodeAffinityPreset.type	Thanos Store Gateway node affinity preset type. Ignored if storegateway.affinity is set. Allowed values: soft or hard	""
storegateway.nodeAffinityPreset.key	Thanos Store Gateway node label key to match. Ignored if storegateway.affinity is set.	""
storegateway.nodeAffinityPreset.values	Thanos Store Gateway node label values to match. Ignored if storegateway.affinity is set.	[]
storegateway.affinity	Thanos Store Gateway affinity for pod assignment	{}
storegateway.nodeSelector	Thanos Store Gateway node labels for pod assignment	{}
storegateway.tolerations	Thanos Store Gateway tolerations for pod assignment	[]
storegateway.podLabels	Thanos Store Gateway pod labels	{}
storegateway.podAnnotations	Annotations for Thanos Store Gateway pods	{}
storegateway.dnsConfig	Deployment pod DNS config	{}
storegateway.dnsPolicy	Deployment pod DNS policy	""
storegateway.hostAliases	Deployment pod host aliases	[]
storegateway.lifecycleHooks	for the Thanos Store Gateway container(s) to automate configuration before or after startup	{}
storegateway.priorityClassName	Thanos Store Gateway priorityClassName	""
storegateway.topologySpreadConstraints	Topology Spread Constraints for Thanos Store Gateway pods assignment spread across your cluster among failure-domains	[]
storegateway.schedulerName	Name of the k8s scheduler (other than default) for Thanos Store Gateway pods	""
storegateway.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
storegateway.networkPolicy.allowExternal	Don’t require client label for connections	true
storegateway.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
storegateway.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
storegateway.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
storegateway.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
storegateway.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
storegateway.service.type	Kubernetes service type	ClusterIP
storegateway.service.ports.http	Thanos Store Gateway service HTTP port	9090
storegateway.service.ports.grpc	Thanos Store Gateway service GRPC port	10901
storegateway.service.nodePorts.http	Specify the Thanos Store Gateway HTTP nodePort value for the LoadBalancer and NodePort service types	""
storegateway.service.nodePorts.grpc	Specify the Thanos Store Gateway GRPC nodePort value for the LoadBalancer and NodePort service types	""
storegateway.service.clusterIP	Thanos Store Gateway service clusterIP IP	""
storegateway.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
storegateway.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
storegateway.service.externalTrafficPolicy	Thanos Store Gateway service externalTrafficPolicy	Cluster
storegateway.service.labels	Extra labels for Thanos Store Gateway service	{}
storegateway.service.annotations	Annotations for Thanos Store Gateway service	{}
storegateway.service.extraPorts	Extra ports to expose in the Thanos Store Gateway service	[]
storegateway.service.labelSelectorsOverride	Selector for Thanos Query service	{}
storegateway.service.additionalHeadless	Additional Headless service	false
storegateway.service.headless.annotations	Annotations for the headless service.	{}
storegateway.persistence.enabled	Enable data persistence using PVC(s) on Thanos Store Gateway pods	true
storegateway.persistence.storageClass	Specify the storageClass used to provision the volume	""
storegateway.persistence.accessModes	PVC Access Modes for data volume	["ReadWriteOnce"]
storegateway.persistence.size	PVC Storage Request for data volume	8Gi
storegateway.persistence.labels	Labels for the PVC	{}
storegateway.persistence.annotations	Annotations for the PVC	{}
storegateway.persistence.existingClaim	Name of an existing PVC to use	""
storegateway.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Thanos Store Gateway Statefulset	false
storegateway.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
storegateway.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain
storegateway.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the sts	true
storegateway.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
storegateway.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
storegateway.serviceAccount.annotations	Annotations for Thanos Store Gateway Service Account	{}
storegateway.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
storegateway.autoscaling.enabled	Enable autoscaling for Thanos Store Gateway	false
storegateway.autoscaling.minReplicas	Minimum number of Thanos Store Gateway replicas	""
storegateway.autoscaling.maxReplicas	Maximum number of Thanos Store Gateway replicas	""
storegateway.autoscaling.targetCPU	Target CPU utilization percentage	""
storegateway.autoscaling.targetMemory	Target Memory utilization percentage	""
storegateway.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Store Gateway	true
storegateway.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
storegateway.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
storegateway.ingress.enabled	Enable ingress controller resource	false
storegateway.ingress.hostname	Default host for the ingress resource	thanos-storegateway.local
storegateway.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
storegateway.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
storegateway.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
storegateway.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
storegateway.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
storegateway.ingress.extraRules	Additional rules to be covered with this ingress record	[]
storegateway.ingress.tls	Enable TLS configuration for the hostname defined at storegateway.ingress.hostname parameter	false
storegateway.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
storegateway.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
storegateway.ingress.path	Ingress path	/
storegateway.ingress.pathType	Ingress path type	ImplementationSpecific
storegateway.ingress.grpc.enabled	Enable ingress controller resource (GRPC)	false
storegateway.ingress.grpc.hostname	Default host for the ingress resource (GRPC)	thanos-grpc.local
storegateway.ingress.grpc.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
storegateway.ingress.grpc.annotations	Additional annotations for the Ingress resource (GRPC). To enable certificate autogeneration, place here your cert-manager annotations.	{}
storegateway.ingress.grpc.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
storegateway.ingress.grpc.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
storegateway.ingress.grpc.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
storegateway.ingress.grpc.extraRules	Additional rules to be covered with this ingress record	[]
storegateway.ingress.grpc.tls	Enable TLS configuration for the hostname defined at storegateway.ingress.grpc.hostname parameter	false
storegateway.ingress.grpc.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
storegateway.ingress.grpc.apiVersion	Override API Version (automatically detected if not set)	""
storegateway.ingress.grpc.path	Ingress Path	/
storegateway.ingress.grpc.pathType	Ingress Path type	ImplementationSpecific
storegateway.sharded.enabled	Enable sharding for Thanos Store Gateway	false
storegateway.sharded.hashPartitioning.shards	Setting hashPartitioning will create multiple store statefulsets based on the number of shards specified using the hashmod of the blocks	""
storegateway.sharded.hashPartitioning.extraRelabelingConfigs	Setting extra relabel config	[]
storegateway.sharded.timePartitioning	Setting time timePartitioning will create multiple store deployments based on the number of partitions	[]
storegateway.sharded.service.clusterIPs	Array of cluster IPs for each Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.loadBalancerIPs	Array of load balancer IPs for each Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.http.nodePorts	Array of http node ports used for Store Gateway service. Length must be the same as the number of shards	[]
storegateway.sharded.service.grpc.nodePorts	Array of grpc node ports used for Store Gateway service. Length must be the same as the number of shards	[]

Thanos Ruler parameters

Name	Description	Value
ruler.enabled	Enable/disable Thanos Ruler component	false
ruler.logLevel	Thanos Ruler log level	info
ruler.logFormat	Thanos Ruler log format	logfmt
ruler.replicaLabel	Label to treat as a replica indicator along which data is de-duplicated	replica
ruler.dnsDiscovery.enabled	Dynamically configure Query APIs using DNS discovery	true
ruler.queryURL	Thanos query/query-frontend URL to link in Ruler UI.	""
ruler.alertmanagers	Alert managers URLs array	[]
ruler.alertmanagersConfig	Alert managers configuration	""
ruler.evalInterval	The default evaluation interval to use	1m
ruler.clusterName	Used to set the ‘ruler_cluster’ label	""
ruler.config	Ruler configuration	""
ruler.dataPath	Path to the data directory	""
ruler.existingConfigmap	Name of existing ConfigMap with Ruler configuration	""
ruler.extraEnvVars	Extra environment variables for Thanos Ruler container	[]
ruler.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Ruler nodes	""
ruler.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Ruler nodes	""
ruler.extraFlags	Extra Flags to passed to Thanos Ruler	[]
ruler.command	Override default container command (useful when using custom images)	[]
ruler.args	Override default container args (useful when using custom images)	[]
ruler.replicaCount	Number of Thanos Ruler replicas to deploy	1
ruler.revisionHistoryLimit	The number of old history to retain to allow rollback	10
ruler.updateStrategy.type	Update strategy type for Thanos Ruler replicas	RollingUpdate
ruler.podManagementPolicy	Statefulset Pod Management Policy Type	OrderedReady
ruler.containerPorts.http	HTTP container port	10902
ruler.containerPorts.grpc	GRPC container port	10901
ruler.podSecurityContext.enabled	Enable security context for the Thanos Ruler pods	true
ruler.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
ruler.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
ruler.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
ruler.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Ruler pods	1001
ruler.containerSecurityContext.enabled	Enabled containers’ Security Context	true
ruler.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
ruler.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
ruler.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
ruler.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
ruler.containerSecurityContext.privileged	Set container’s Security Context privileged	false
ruler.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
ruler.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
ruler.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
ruler.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
ruler.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if ruler.resources is set (ruler.resources is recommended for production).	nano
ruler.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
ruler.livenessProbe.enabled	Enable livenessProbe on Thanos Ruler containers	true
ruler.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
ruler.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
ruler.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
ruler.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
ruler.livenessProbe.successThreshold	Success threshold for livenessProbe	1
ruler.readinessProbe.enabled	Enable readinessProbe on Thanos Ruler containers	true
ruler.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
ruler.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
ruler.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
ruler.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
ruler.readinessProbe.successThreshold	Success threshold for readinessProbe	1
ruler.startupProbe.enabled	Enable startupProbe on Thanos Ruler containers	false
ruler.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
ruler.startupProbe.periodSeconds	Period seconds for startupProbe	5
ruler.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
ruler.startupProbe.failureThreshold	Failure threshold for startupProbe	15
ruler.startupProbe.successThreshold	Success threshold for startupProbe	1
ruler.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
ruler.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
ruler.customStartupProbe	Custom startupProbe that overrides the default one	{}
ruler.initContainers	Add additional init containers to the Thanos Ruler pods	[]
ruler.sidecars	Extra containers running as sidecars to Thanos Ruler pods	[]
ruler.extraVolumes	Extra volumes to add to Thanos Ruler	[]
ruler.extraVolumeMounts	Extra volume mounts to add to the ruler container	[]
ruler.podAffinityPreset	Thanos Ruler pod affinity preset	""
ruler.podAntiAffinityPreset	Thanos Ruler pod anti-affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	soft
ruler.nodeAffinityPreset.type	Thanos Ruler node affinity preset type. Ignored if ruler.affinity is set. Allowed values: soft or hard	""
ruler.nodeAffinityPreset.key	Thanos Ruler node label key to match. Ignored if ruler.affinity is set.	""
ruler.nodeAffinityPreset.values	Thanos Ruler node label values to match. Ignored if ruler.affinity is set.	[]
ruler.affinity	Thanos Ruler affinity for pod assignment	{}
ruler.nodeSelector	Thanos Ruler node labels for pod assignment	{}
ruler.tolerations	Thanos Ruler tolerations for pod assignment	[]
ruler.podLabels	Thanos Ruler pod labels	{}
ruler.podAnnotations	Annotations for Thanos Ruler pods	{}
ruler.dnsConfig	Deployment pod DNS config	{}
ruler.dnsPolicy	Deployment pod DNS policy	""
ruler.hostAliases	Deployment pod host aliases	[]
ruler.lifecycleHooks	for the Thanos Ruler container(s) to automate configuration before or after startup	{}
ruler.priorityClassName	Thanos Ruler priorityClassName	""
ruler.schedulerName	Name of the k8s scheduler (other than default) for Thanos Ruler pods	""
ruler.topologySpreadConstraints	Topology Spread Constraints for Thanos Ruler pods assignment spread across your cluster among failure-domains	[]
ruler.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
ruler.networkPolicy.allowExternal	Don’t require client label for connections	true
ruler.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
ruler.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
ruler.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
ruler.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
ruler.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
ruler.service.type	Kubernetes service type	ClusterIP
ruler.service.ports.http	Thanos Ruler service HTTP port	9090
ruler.service.ports.grpc	Thanos Ruler service GRPC port	10901
ruler.service.nodePorts.http	Specify the Thanos Ruler HTTP nodePort value for the LoadBalancer and NodePort service types	""
ruler.service.nodePorts.grpc	Specify the Thanos Ruler GRPC nodePort value for the LoadBalancer and NodePort service types	""
ruler.service.clusterIP	Thanos Ruler service clusterIP IP	""
ruler.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
ruler.service.loadBalancerSourceRanges	Address that are allowed when service is LoadBalancer	[]
ruler.service.externalTrafficPolicy	Thanos Ruler service externalTrafficPolicy	Cluster
ruler.service.labels	Extra labels for Thanos Ruler service	{}
ruler.service.annotations	Annotations for Thanos Ruler service	{}
ruler.service.extraPorts	Extra ports to expose in the Thanos Ruler service	[]
ruler.service.labelSelectorsOverride	Selector for Thanos Query service	{}
ruler.service.additionalHeadless	Additional Headless service	false
ruler.service.headless.annotations	Annotations for the headless service.	{}
ruler.persistence.enabled	Enable data persistence using PVC(s) on Thanos Ruler pods	true
ruler.persistence.storageClass	Specify the storageClass used to provision the volume	""
ruler.persistence.accessModes	PVC Access Modes for data volume	["ReadWriteOnce"]
ruler.persistence.size	PVC Storage Request for data volume	8Gi
ruler.persistence.annotations	Annotations for the PVC	{}
ruler.persistence.existingClaim	Name of an existing PVC to use	""
ruler.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Thanos Ruler Statefulset	false
ruler.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
ruler.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain
ruler.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the sts	true
ruler.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
ruler.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
ruler.serviceAccount.annotations	Annotations for Thanos Ruler Service Account	{}
ruler.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
ruler.autoscaling.enabled	Enable autoscaling for Thanos Ruler	false
ruler.autoscaling.minReplicas	Minimum number of Thanos Ruler replicas	""
ruler.autoscaling.maxReplicas	Maximum number of Thanos Ruler replicas	""
ruler.autoscaling.targetCPU	Target CPU utilization percentage	""
ruler.autoscaling.targetMemory	Target Memory utilization percentage	""
ruler.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Ruler	true
ruler.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
ruler.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
ruler.ingress.enabled	Enable ingress controller resource	false
ruler.ingress.hostname	Default host for the ingress resource	thanos-ruler.local
ruler.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
ruler.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ruler.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
ruler.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
ruler.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
ruler.ingress.extraRules	Additional rules to be covered with this ingress record	[]
ruler.ingress.apiVersion	Force Ingress API version (automatically detected if not set)	""
ruler.ingress.path	Ingress path	/
ruler.ingress.pathType	Ingress path type	ImplementationSpecific

Thanos Receive parameters

Name	Description	Value
receive.enabled	Enable/disable Thanos Receive component	false
receive.mode	Mode to run receiver in. Valid options are “standalone” or “dual-mode”	standalone
receive.logLevel	Thanos Receive log level	info
receive.logFormat	Thanos Receive log format	logfmt
receive.tsdbRetention	Thanos Receive TSDB retention period	15d
receive.replicationFactor	Thanos Receive replication-factor	1
receive.config	Receive Hashring configuration	[]
receive.tsdbPath	Thanos Receive path to the time series database	""
receive.existingConfigmap	Name of existing ConfigMap with Thanos Receive Hashring configuration	""
receive.replicaLabel	Label to treat as a replica indicator along which data is de-duplicated	replica
receive.grpc.server.tls.enabled	Enable TLS encryption in the GRPC server	false
receive.grpc.server.tls.autoGenerated	Create self-signed TLS certificates. Currently only supports PEM certificates	false
receive.grpc.server.tls.cert	TLS Certificate for GRPC server - ignored if existingSecret is provided	""
receive.grpc.server.tls.key	TLS Key for GRPC server - ignored if existingSecret is provided	""
receive.grpc.server.tls.ca	TLS CA to verify clients against - ignored if existingSecret is provided	""
receive.grpc.server.tls.clientAuthEnabled	Enable TLS client verification against provided CA	true
receive.grpc.server.tls.existingSecret	Existing secret containing your own TLS certificates	{}
receive.extraEnvVars	Extra environment variables for Thanos Receive container	[]
receive.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Receive nodes	""
receive.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Receive nodes	""
receive.extraFlags	Extra Flags to passed to Thanos Receive	[]
receive.command	Override default container command (useful when using custom images)	[]
receive.args	Override default container args (useful when using custom images)	[]
receive.replicaCount	Number of Thanos Receive replicas to deploy	1
receive.revisionHistoryLimit	The number of old history to retain to allow rollback	10
receive.updateStrategy.type	Update strategy type for Thanos Receive replicas	RollingUpdate
receive.podManagementPolicy		OrderedReady
receive.podManagementPolicy	Statefulset Pod management policy: OrderedReady (default) or Parallel	OrderedReady
receive.minReadySeconds	How many seconds a pod needs to be ready before killing the next, during update	0
receive.containerPorts.http	HTTP container port	10902
receive.containerPorts.grpc	GRPC container port	10901
receive.containerPorts.remote	remote-write container port	19291
receive.podSecurityContext.enabled	Enable security context for the Thanos Receive pods	true
receive.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
receive.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
receive.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
receive.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Receive pods	1001
receive.containerSecurityContext.enabled	Enabled containers’ Security Context	true
receive.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
receive.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
receive.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
receive.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
receive.containerSecurityContext.privileged	Set container’s Security Context privileged	false
receive.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
receive.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
receive.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
receive.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
receive.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if receive.resources is set (receive.resources is recommended for production).	nano
receive.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
receive.livenessProbe.enabled	Enable livenessProbe on Thanos Receive containers	true
receive.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
receive.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
receive.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
receive.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
receive.livenessProbe.successThreshold	Success threshold for livenessProbe	1
receive.readinessProbe.enabled	Enable readinessProbe on Thanos Receive containers	true
receive.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
receive.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
receive.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
receive.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
receive.readinessProbe.successThreshold	Success threshold for readinessProbe	1
receive.startupProbe.enabled	Enable startupProbe on Thanos Receive containers	false
receive.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
receive.startupProbe.periodSeconds	Period seconds for startupProbe	5
receive.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
receive.startupProbe.failureThreshold	Failure threshold for startupProbe	15
receive.startupProbe.successThreshold	Success threshold for startupProbe	1
receive.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
receive.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
receive.customStartupProbe	Custom startupProbe that overrides the default one	{}
receive.initContainers	Add additional init containers to the Thanos Receive pods	[]
receive.sidecars	Extra containers running as sidecars to Thanos Receive pods	[]
receive.extraVolumes	Extra volumes to add to Thanos Receive	[]
receive.extraVolumeMounts	Extra volume mounts to add to the receive container	[]
receive.podAffinityPreset	Thanos Receive pod affinity preset	""
receive.podAntiAffinityPreset	Thanos Receive pod anti-affinity preset. Ignored if ruler.affinity is set. Allowed values: soft or hard	soft
receive.nodeAffinityPreset.type	Thanos Receive node affinity preset type. Ignored if receive.affinity is set. Allowed values: soft or hard	""
receive.nodeAffinityPreset.key	Thanos Receive node label key to match. Ignored if receive.affinity is set.	""
receive.nodeAffinityPreset.values	Thanos Receive node label values to match. Ignored if receive.affinity is set.	[]
receive.affinity	Thanos Receive affinity for pod assignment	{}
receive.nodeSelector	Thanos Receive node labels for pod assignment	{}
receive.tolerations	Thanos Receive tolerations for pod assignment	[]
receive.statefulsetLabels	Thanos Receive statefulset labels	{}
receive.podLabels	Thanos Receive pod labels	{}
receive.podAnnotations	Annotations for Thanos Receive pods	{}
receive.dnsConfig	Deployment pod DNS config	{}
receive.dnsPolicy	Deployment pod DNS policy	""
receive.hostAliases	Deployment pod host aliases	[]
receive.terminationGracePeriodSeconds	for the Thanos Receive containers(s) to extend the grace period	""
receive.lifecycleHooks	for the Thanos Receive container(s) to automate configuration before or after startup	{}
receive.priorityClassName	Thanos Receive priorityClassName	""
receive.schedulerName	Name of the k8s scheduler (other than default) for Thanos Receive pods	""
receive.topologySpreadConstraints	Topology Spread Constraints for Thanos Receive pods assignment spread across your cluster among failure-domains	[]
receive.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
receive.networkPolicy.allowExternal	Don’t require client label for connections	true
receive.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
receive.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
receive.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
receive.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
receive.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
receive.service.type	Kubernetes service type	ClusterIP
receive.service.ports.http	Thanos Ruler service HTTP port	10902
receive.service.ports.grpc	Thanos Ruler service GRPC port	10901
receive.service.ports.remote	Thanos Ruler service remote port	19291
receive.service.nodePorts.http	Specify the Thanos Ruler HTTP nodePort value for the LoadBalancer and NodePort service types	""
receive.service.nodePorts.grpc	Specify the Thanos Ruler GRPC nodePort value for the LoadBalancer and NodePort service types	""
receive.service.nodePorts.remote	Specify the Thanos Ruler remote nodePort value for the LoadBalancer and NodePort service types	""
receive.service.clusterIP	Thanos Ruler service clusterIP IP	""
receive.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
receive.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
receive.service.externalTrafficPolicy	Thanos Ruler service externalTrafficPolicy	Cluster
receive.service.labels	Extra labels for Thanos Receive service	{}
receive.service.annotations	Annotations for Thanos Receive service	{}
receive.service.extraPorts	Extra ports to expose in the Thanos Receive service	[]
receive.service.labelSelectorsOverride	Selector for Thanos receive service	{}
receive.service.additionalHeadless	Additional Headless service	false
receive.service.headless.annotations	Annotations for the headless service.	{}
receive.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the sts	true
receive.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
receive.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
receive.serviceAccount.annotations	Annotations for Thanos Receive Service Account	{}
receive.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
receive.autoscaling.enabled	Enable autoscaling for Thanos Receive	false
receive.autoscaling.minReplicas	Minimum number of Thanos Receive replicas	""
receive.autoscaling.maxReplicas	Maximum number of Thanos Receive replicas	""
receive.autoscaling.targetCPU	Target CPU utilization percentage	""
receive.autoscaling.targetMemory	Target Memory utilization percentage	""
receive.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Receive	true
receive.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
receive.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""
receive.persistence.enabled	Enable data persistence using PVC(s) on Thanos Receive pods	true
receive.persistence.storageClass	Specify the storageClass used to provision the volume	""
receive.persistence.accessModes	PVC Access Modes for data volume	["ReadWriteOnce"]
receive.persistence.size	PVC Storage Request for data volume	8Gi
receive.persistence.labels	Labels for the PVC	{}
receive.persistence.annotations	Annotations for the PVC	{}
receive.persistence.existingClaim	Name of an existing PVC to use	""
receive.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Thanos Receive Statefulset	false
receive.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
receive.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain
receive.ingress.enabled	Set to true to enable ingress record generation	false
receive.ingress.hostname	When the ingress is enabled, a host pointing to this will be created	thanos-receive.local
receive.ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
receive.ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
receive.ingress.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
receive.ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
receive.ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
receive.ingress.extraRules	Additional rules to be covered with this ingress record	[]
receive.ingress.tls	Enable TLS configuration for the hostname defined at receive.ingress.hostname parameter	false
receive.ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
receive.ingress.apiVersion	Override API Version (automatically detected if not set)	""
receive.ingress.path	Ingress Path	/
receive.ingress.pathType	Ingress Path type	ImplementationSpecific

Thanos Receive Distributor parameters

Name	Description	Value
receiveDistributor.enabled	Enable/disable Thanos Receive Distributor component	false
receiveDistributor.logLevel	Thanos Receive Distributor log level	info
receiveDistributor.logFormat	Thanos Receive Distributor log format	logfmt
receiveDistributor.replicaLabel	Label to treat as a replica indicator along which data is de-duplicated	replica
receiveDistributor.replicationFactor	Thanos Receive Distributor replication-factor	1
receiveDistributor.extraEnvVars	Extra environment variables for Thanos Receive Distributor container	[]
receiveDistributor.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for Thanos Receive Distributor nodes	""
receiveDistributor.extraEnvVarsSecret	Name of existing Secret containing extra env vars for Thanos Receive Distributor nodes	""
receiveDistributor.extraFlags	Extra Flags to passed to Thanos Receive Distributor	[]
receiveDistributor.command	Override default container command (useful when using custom images)	[]
receiveDistributor.args	Override default container args (useful when using custom images)	[]
receiveDistributor.replicaCount	Number of Thanos Receive Distributor replicas to deploy	1
receiveDistributor.revisionHistoryLimit	The number of old history to retain to allow rollback	10
receiveDistributor.updateStrategy.type	Update strategy type for Thanos Receive Distributor replicas	RollingUpdate
receiveDistributor.podSecurityContext.enabled	Enable security context for the Thanos Receive Distributor pods	true
receiveDistributor.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
receiveDistributor.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
receiveDistributor.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
receiveDistributor.podSecurityContext.fsGroup	Group ID for the filesystem used by Thanos Receive Distributor pods	1001
receiveDistributor.containerSecurityContext.enabled	Enabled containers’ Security Context	true
receiveDistributor.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
receiveDistributor.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
receiveDistributor.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
receiveDistributor.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
receiveDistributor.containerSecurityContext.privileged	Set container’s Security Context privileged	false
receiveDistributor.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
receiveDistributor.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
receiveDistributor.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
receiveDistributor.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
receiveDistributor.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if receiveDistributor.resources is set (receiveDistributor.resources is recommended for production).	nano
receiveDistributor.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
receiveDistributor.livenessProbe.enabled	Enable livenessProbe on Thanos Receive Distributor containers	true
receiveDistributor.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
receiveDistributor.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
receiveDistributor.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	30
receiveDistributor.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
receiveDistributor.livenessProbe.successThreshold	Success threshold for livenessProbe	1
receiveDistributor.readinessProbe.enabled	Enable readinessProbe on Thanos Receive Distributor containers	true
receiveDistributor.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
receiveDistributor.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
receiveDistributor.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	30
receiveDistributor.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
receiveDistributor.readinessProbe.successThreshold	Success threshold for readinessProbe	1
receiveDistributor.startupProbe.enabled	Enable startupProbe on Thanos Receive Distributor containers	false
receiveDistributor.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	5
receiveDistributor.startupProbe.periodSeconds	Period seconds for startupProbe	5
receiveDistributor.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
receiveDistributor.startupProbe.failureThreshold	Failure threshold for startupProbe	15
receiveDistributor.startupProbe.successThreshold	Success threshold for startupProbe	1
receiveDistributor.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
receiveDistributor.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
receiveDistributor.customStartupProbe	Custom startupProbe that overrides the default one	{}
receiveDistributor.terminationGracePeriodSeconds	for the Thanos Receive containers(s) to extend the grace period	""
receiveDistributor.initContainers	Add additional init containers to the Thanos Receive Distributor pods	[]
receiveDistributor.sidecars	Extra containers running as sidecars to Thanos Receive Distributor pods	[]
receiveDistributor.extraVolumes	Extra volumes to add to Thanos Receive Distributor	[]
receiveDistributor.extraVolumeMounts	Extra volume mounts to add to the receive distributor container	[]
receiveDistributor.podAffinityPreset	Thanos Receive pod affinity preset	""
receiveDistributor.podAntiAffinityPreset	Thanos Receive pod anti-affinity preset. Ignored if receiveDistributor.affinity is set. Allowed values: soft or hard	soft
receiveDistributor.nodeAffinityPreset.type	Thanos Receive node affinity preset type. Ignored if receiveDistributor.affinity is set. Allowed values: soft or hard	""
receiveDistributor.nodeAffinityPreset.key	Thanos Receive node label key to match. Ignored if receiveDistributor.affinity is set.	""
receiveDistributor.nodeAffinityPreset.values	Thanos Receive node label values to match. Ignored if receiveDistributor.affinity is set.	[]
receiveDistributor.affinity	Thanos Receive Distributor affinity for pod assignment	{}
receiveDistributor.nodeSelector	Thanos Receive Distributor node labels for pod assignment	{}
receiveDistributor.tolerations	Thanos Receive Distributor tolerations for pod assignment	[]
receiveDistributor.podLabels	Thanos Receive Distributor pod labels	{}
receiveDistributor.podAnnotations	Annotations for Thanos Receive Distributor pods	{}
receiveDistributor.dnsConfig	Deployment pod DNS config	{}
receiveDistributor.dnsPolicy	Deployment pod DNS policy	""
receiveDistributor.hostAliases	Deployment pod host aliases	[]
receiveDistributor.lifecycleHooks	for the Thanos Receive Distributor container(s) to automate configuration before or after startup	{}
receiveDistributor.priorityClassName	Thanos Receive Distributor priorityClassName	""
receiveDistributor.schedulerName	Name of the k8s scheduler (other than default) for Thanos Receive Distributor pods	""
receiveDistributor.topologySpreadConstraints	Topology Spread Constraints for Thanos Receive Distributor pods assignment spread across your cluster among failure-domains	[]
receiveDistributor.automountServiceAccountToken	Enable/disable auto mounting of the service account token only for the deployment	true
receiveDistributor.serviceAccount.create	Specifies whether a ServiceAccount should be created	true
receiveDistributor.serviceAccount.name	Name of the service account to use. If not set and create is true, a name is generated using the fullname template.	""
receiveDistributor.serviceAccount.annotations	Annotations for Thanos Receive Distributor Service Account	{}
receiveDistributor.serviceAccount.automountServiceAccountToken	Enable/disable auto mounting of the service account token	false
receiveDistributor.autoscaling.enabled	Enable autoscaling for Thanos Receive Distributor	false
receiveDistributor.autoscaling.minReplicas	Minimum number of Thanos Receive Distributor replicas	""
receiveDistributor.autoscaling.maxReplicas	Maximum number of Thanos Receive Distributor replicas	""
receiveDistributor.autoscaling.targetCPU	Target CPU utilization percentage	""
receiveDistributor.autoscaling.targetMemory	Target Memory utilization percentage	""
receiveDistributor.pdb.create	Enable/disable a Pod Disruption Budget creation for Thanos Receive Distributor	true
receiveDistributor.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
receiveDistributor.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable	""

Metrics parameters

Name	Description	Value
metrics.enabled	Enable the export of Prometheus metrics	false
metrics.serviceMonitor.enabled	Specify if a ServiceMonitor will be deployed for Prometheus Operator	false
metrics.serviceMonitor.namespace	Namespace in which Prometheus is running	""
metrics.serviceMonitor.labels	Extra labels for the ServiceMonitor	{}
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in Prometheus	""
metrics.serviceMonitor.interval	How frequently to scrape metrics	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.metricRelabelings	Specify additional relabeling of metrics	[]
metrics.serviceMonitor.relabelings	Specify general relabeling	[]
metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
metrics.serviceMonitor.extraParameters	Any extra parameter to be added to the endpoint configured in the ServiceMonitor	{}
metrics.prometheusRule.enabled	If true, creates a Prometheus Operator PrometheusRule (also requires metrics.enabled to be true)	false
metrics.prometheusRule.default.absent_rules	Enable absent_rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.compaction	Enable compaction rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.query	Enable query when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.receive	Enable receive rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.replicate	Enable replicate rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.ruler	Enable ruler rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.sidecar	Enable sidecar rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.sidecarJobRegex	Allows the customization of the thanos-sidecar job name to use in the sidecar prometheus alerts	.*thanos-sidecar.*
metrics.prometheusRule.default.store_gateway	Enable store_gateway rules when metrics.prometheusRule.default.create is false (also requires metrics.enabled to be true)
metrics.prometheusRule.default.create	would create all default prometheus alerts	false
metrics.prometheusRule.default.disabled.ThanosCompactIsDown	Disable ThanosCompactIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosQueryIsDown	Disable ThanosQueryIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosReceiveIsDown	Disable ThanosReceiveIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosRuleIsDown	Disable ThanosRuleIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosSidecarIsDown	Disable ThanosSidecarIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosStoreIsDown	Disable ThanosStoreIsDown rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.absent_rules is true
metrics.prometheusRule.default.disabled.ThanosCompactMultipleRunning	Disable ThanosCompactMultipleRunning rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.compaction is true
metrics.prometheusRule.default.disabled.ThanosCompactHalted	Disable ThanosCompactMultipleRunning rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.compaction is true
metrics.prometheusRule.default.disabled.ThanosCompactHighCompactionFailures	Disable ThanosCompactMultipleRunning rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.compaction is true
metrics.prometheusRule.default.disabled.ThanosCompactBucketHighOperationFailures	Disable ThanosCompactMultipleRunning rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.compaction is true
metrics.prometheusRule.default.disabled.ThanosCompactHasNotRun	Disable ThanosCompactMultipleRunning rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.compaction is true
metrics.prometheusRule.default.disabled.ThanosQueryHttpRequestQueryErrorRateHigh	Disable ThanosQueryHttpRequestQueryErrorRateHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryHttpRequestQueryRangeErrorRateHigh	Disable ThanosQueryHttpRequestQueryRangeErrorRateHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryGrpcServerErrorRate	Disable ThanosQueryGrpcServerErrorRate rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryGrpcClientErrorRate	Disable ThanosQueryGrpcClientErrorRate rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryHighDNSFailures	Disable ThanosQueryHighDNSFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryInstantLatencyHigh	Disable ThanosQueryInstantLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryRangeLatencyHigh	Disable ThanosQueryRangeLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosQueryOverload	Disable ThanosQueryOverload rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.query is true
metrics.prometheusRule.default.disabled.ThanosReceiveHttpRequestErrorRateHigh	Disable ThanosReceiveHttpRequestErrorRateHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveHttpRequestLatencyHigh	Disable ThanosReceiveHttpRequestLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveHighReplicationFailures	Disable ThanosReceiveHighReplicationFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveHighForwardRequestFailures	Disable ThanosReceiveHighForwardRequestFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveHighHashringFileRefreshFailures	Disable ThanosReceiveHighHashringFileRefreshFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveConfigReloadFailure	Disable ThanosReceiveConfigReloadFailure rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveNoUpload	Disable ThanosReceiveNoUpload rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosReceiveTrafficBelowThreshold	Disable ThanosReceiveTrafficBelowThreshold rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosBucketReplicateErrorRate	Disable ThanosBucketReplicateErrorRate rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosBucketReplicateRunLatency	Disable ThanosBucketReplicateRunLatency rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.receive is true
metrics.prometheusRule.default.disabled.ThanosRuleQueueIsDroppingAlerts	Disable ThanosRuleQueueIsDroppingAlerts rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleSenderIsFailingAlerts	Disable ThanosRuleSenderIsFailingAlerts rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleHighRuleEvaluationFailures	Disable ThanosRuleHighRuleEvaluationFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleHighRuleEvaluationWarnings	Disable ThanosRuleHighRuleEvaluationWarnings rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleRuleEvaluationLatencyHigh	Disable ThanosRuleRuleEvaluationLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleGrpcErrorRate	Disable ThanosRuleGrpcErrorRate rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleConfigReloadFailure	Disable ThanosRuleConfigReloadFailure rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleQueryHighDNSFailures	Disable ThanosRuleQueryHighDNSFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleAlertmanagerHighDNSFailures	Disable ThanosRuleAlertmanagerHighDNSFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosRuleNoEvaluationFor10Intervals	Disable ThanosRuleNoEvaluationFor10Intervals rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosNoRuleEvaluations	Disable ThanosNoRuleEvaluations rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.ruler is true
metrics.prometheusRule.default.disabled.ThanosSidecarBucketOperationsFailed	Disable ThanosSidecarBucketOperationsFailed rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.sidecar is true
metrics.prometheusRule.default.disabled.ThanosSidecarNoConnectionToStartedPrometheus	Disable ThanosSidecarNoConnectionToStartedPrometheus rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.sidecar is true
metrics.prometheusRule.default.disabled.ThanosStoreGrpcErrorRate	Disable ThanosSidecarNoConnectionToStartedPrometheus rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.store_gateway is true
metrics.prometheusRule.default.disabled.ThanosStoreSeriesGateLatencyHigh	Disable ThanosStoreSeriesGateLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.store_gateway is true
metrics.prometheusRule.default.disabled.ThanosStoreBucketHighOperationFailures	Disable ThanosStoreBucketHighOperationFailures rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.store_gateway is true
metrics.prometheusRule.default.disabled.ThanosStoreObjstoreOperationLatencyHigh	Disable ThanosStoreObjstoreOperationLatencyHigh rule when metrics.prometheusRule.default.create or metrics.prometheusRule.default.store_gateway is true
metrics.prometheusRule.default.disabled	disable one specific prometheus alert rule	{}
metrics.prometheusRule.runbookUrl	Prefix for runbook URLs. Use this to override the first part of the runbookURLs that is common to all rules	https://github.com/thanos-io/thanos/tree/main/mixin/runbook.md#alert-name-
metrics.prometheusRule.namespace	Namespace in which the PrometheusRule CRD is created	""
metrics.prometheusRule.additionalLabels	Additional labels for the prometheusRule	{}
metrics.prometheusRule.groups	Prometheus Rule Groups for Thanos components	[]

Volume Permissions parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Specify docker-registry secret names as an array	[]

MinIO® chart parameters

Name	Description	Value
minio	For full list of MinIO® values configurations please refere here
minio.enabled	Enable/disable MinIO® chart installation	false
minio.auth.rootUser	MinIO® root username	admin
minio.auth.rootPassword	Password for MinIO® root user	""
minio.defaultBuckets	Comma, semi-colon or space separated list of MinIO® buckets to create	thanos
minio.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	micro
minio.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release --set query.replicaCount=2 oci://REGISTRY_NAME/REPOSITORY_NAME/thanos

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command install Thanos chart with 2 Thanos Query replicas.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/thanos

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 15.0.0

This major bump changes the following security defaults:

• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 14.0.0

This major release bumps the MinIO chart version to 13.x.x; no major issues are expected during the upgrade.

To 13.0.0

This major version changes the NetworkPolicy objects and creates one per Thanos component. The networkPolicy common value was removed in favor of COMPONENT.networkPolicy. Also, NetworkPolicy objects are deployed by default. This can be changed by setting COMPONENT.networkPolicy.enabled=false being COMPONENT one of the Thanos components.

This version also removes deprecated service port values like receive.service.http.port in favor of recieve.service.ports.http, as well as existingServiceAccount.

To 12.0.0

This major updates the MinIO® subchart to its newest major, 12.0.0. This subchart’s major doesn’t include any changes affecting its use as a subchart for Thanos, so no major issues are expected during the upgrade.

To 10.0.0

This version deprecates the usage of MINIO_ACCESS_KEY and MINIO_SECRET_KEY environment variables in MINIO® container in favor of MINIO_ROOT_USER and MINIO_ROOT_PASSWORD.

If you were already using the new variables, no issues are expected during upgrade.

To 9.0.0

This major updates the MinIO® subchart to its newest major, 10.0.0. This subchart’s major doesn’t include any changes affecting its use as a subchart for Thanos, only needing the standard upgrade process from chart’s version 8.X.

To 8.0.0

The chart was changed to adapt to the common Bitnami chart standards. Now it includes common elements such as sidecar and init container support, custom commands, custom liveness/readiness probes, extra environment variables support, extra pod annotations and labels, among others. In addition, other remarkable changes were to harmonize the values structure:

• The receive.distributor.* parameters have been renamed to receiveDistributor.*, and the associated manifests have been moved into its own folder. This way, Thanos Receive Distributor is treated as any other component.
• The parameter to configure TLS in the GRPC server have been restructured so they follow the XXX.grpc.server.tls and XXX.grpc.client.tls format. Previous to this change, we had different structures depending on the component.

To 7.0.0

This major updates the MinIO® subchart to its newest major, 9.0.0, which updates authentication parameters. Check MinIO® Upgrading Notes for more information. This major release renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repositor. Some of the affected values are:

• XXX.extraEnv parameters were renamed to XXX.extraEnvVars.
• XXX.extraContainers parameters were renamed to XXX.sidecars.
• XXX.service.PROTOCOL.port parameters were renamed to XXX.service.ports.PROTOCOL (e.g. query.service.http.port is now query.service.ports.http).
• XXX.service.PROTOCOL.nodePortparameters were renamed to XXX.service.nodePorts.PROTOCOL (e.g. query.service.http.nodePort is now query.service.nodePorts.http).
• XXX.ingress.certManager parameters were deprecated, use XXX.ingress.annotations to set the required annotations for CertManager instead.

To 6.0.0

This major updates the MinIO® subchart to its newest major, 8.0.0, which now has two separated services for MinIO® Console and MinIO® API. Check MinIO® Upgrading Notes for more information.

To 5.4.0

This version introduces support for the receiver dual-mode implementation for Thanos v0.22+

To 5.3.0

This version introduces hash and time partitioning for the store gateway.

To 5.0.0

This major update changes the securityContext interface in the values.yaml file.

Please note if you have changes in the securityContext fields those need to be migrated to podSecurityContext.

# ...
- securityContext:
+ podSecurityContext:
# ...

Other than that a new securityContext interface for containers got introduced containerSecurityContext. It’s default is enabled so if you do not need it you need to opt out of it.

# ...
+ containerSecurityContext
+   enabled: true  # opt out by enabled: false
+   capabilities:
+     drop:
+     - ALL
+   runAsNonRoot: true
+   allowPrivilegeEscalation: false
+   readOnlyRootFilesystem: false
# ...

To 4.0.0

This major updates the MinIO subchart to its newest major, 7.0.0, which removes previous configuration of securityContext and moves to podSecurityContext and containerSecurityContext.

To 3.3.0

This version introduces bitnami/common, a library chart as a dependency. More documentation about this new utility could be found here. Please, make sure that you have updated the chart dependencies before executing any upgrade.

To 3.1.0

The querier component and its settings have been renamed to query. Configuration of the query component by using keys under querier in your values.yaml will continue to work. Support for keys under querier will be dropped in a future release.

querier.enabled                               -> query.enabled
querier.logLevel                              -> query.logLevel
querier.replicaLabel                          -> query.replicaLabel
querier.dnsDiscovery.enabled                  -> query.dnsDiscovery.enabled
querier.dnsDiscovery.sidecarsService          -> query.dnsDiscovery.sidecarsService
querier.dnsDiscovery.sidecarsNamespace        -> query.dnsDiscovery.sidecarsNamespace
querier.stores                                -> query.stores
querier.sdConfig                              -> query.sdConfig
querier.existingSDConfigmap                   -> query.existingSDConfigmap
querier.extraFlags                            -> query.extraFlags
querier.replicaCount                          -> query.replicaCount
querier.strategyType                          -> query.strategyType
querier.affinity                              -> query.affinity
querier.nodeSelector                          -> query.nodeSelector
querier.tolerations                           -> query.tolerations
querier.podLabels                             -> query.podLabels
querier.priorityClassName                     -> query.priorityClassName
querier.securityContext.enabled               -> query.securityContext.enabled
querier.securityContext.fsGroup               -> query.securityContext.fsGroup
querier.securityContext.runAsUser             -> query.securityContext.runAsUser
querier.resources.limits                      -> query.resources.limits
querier.resources.requests                    -> query.resources.requests
querier.podAnnotations                        -> query.podAnnotations
querier.livenessProbe                         -> query.livenessProbe
querier.readinessProbe                        -> query.readinessProbe
querier.grpcTLS.server.secure                 -> query.grpcTLS.server.secure
querier.grpcTLS.server.cert                   -> query.grpcTLS.server.cert
querier.grpcTLS.server.key                    -> query.grpcTLS.server.key
querier.grpcTLS.server.ca                     -> query.grpcTLS.server.ca
querier.grpcTLS.client.secure                 -> query.grpcTLS.client.secure
querier.grpcTLS.client.cert                   -> query.grpcTLS.client.cert
querier.grpcTLS.client.key                    -> query.grpcTLS.client.key
querier.grpcTLS.client.ca                     -> query.grpcTLS.client.ca
querier.grpcTLS.client.servername             -> query.grpcTLS.client.servername
querier.service.type                          -> query.service.type
querier.service.clusterIP                     -> query.service.clusterIP
querier.service.http.port                     -> query.service.http.port
querier.service.http.nodePort                 -> query.service.http.nodePort
querier.service.grpc.port                     -> query.service.grpc.port
querier.service.grpc.nodePort                 -> query.service.grpc.nodePort
querier.service.loadBalancerIP                -> query.service.loadBalancerIP
querier.service.loadBalancerSourceRanges      -> query.service.loadBalancerSourceRanges
querier.service.annotations                   -> query.service.annotations
querier.service.labelSelectorsOverride        -> query.service.labelSelectorsOverride
querier.serviceAccount.annotations            -> query.serviceAccount.annotations
querier.rbac.create                           -> query.rbac.create
querier.pspEnabled                            -> query.pspEnabled
querier.autoscaling.enabled                   -> query.autoscaling.enabled
querier.autoscaling.minReplicas               -> query.autoscaling.minReplicas
querier.autoscaling.maxReplicas               -> query.autoscaling.maxReplicas
querier.autoscaling.targetCPU                 -> query.autoscaling.targetCPU
querier.autoscaling.targetMemory              -> query.autoscaling.targetMemory
querier.pdb.create                            -> query.pdb.create
querier.pdb.minAvailable                      -> query.pdb.minAvailable
querier.pdb.maxUnavailable                    -> query.pdb.maxUnavailable
querier.ingress.enabled                       -> query.ingress.enabled
querier.ingress.certManager                   -> query.ingress.certManager
querier.ingress.hostname                      -> query.ingress.hostname
querier.ingress.annotations                   -> query.ingress.annotations
querier.ingress.tls                           -> query.ingress.tls
querier.ingress.extraHosts[0].name            -> query.ingress.extraHosts[0].name
querier.ingress.extraHosts[0].path            -> query.ingress.extraHosts[0].path
querier.ingress.extraTls[0].hosts[0]          -> query.ingress.extraTls[0].hosts[0]
querier.ingress.extraTls[0].secretName        -> query.ingress.extraTls[0].secretName
querier.ingress.secrets[0].name               -> query.ingress.secrets[0].name
querier.ingress.secrets[0].certificate        -> query.ingress.secrets[0].certificate
querier.ingress.secrets[0].key                -> query.ingress.secrets[0].key
querier.ingress.grpc.enabled                  -> query.ingress.grpc.enabled
querier.ingress.grpc.certManager              -> query.ingress.grpc.certManager
querier.ingress.grpc.hostname                 -> query.ingress.grpc.hostname
querier.ingress.grpc.annotations              -> query.ingress.grpc.annotations
querier.ingress.grpc.extraHosts[0].name       -> query.ingress.grpc.extraHosts[0].name
querier.ingress.grpc.extraHosts[0].path       -> query.ingress.grpc.extraHosts[0].path
querier.ingress.grpc.extraTls[0].hosts[0]     -> query.ingress.grpc.extraTls[0].hosts[0]
querier.ingress.grpc.extraTls[0].secretName   -> query.ingress.grpc.extraTls[0].secretName
querier.ingress.grpc.secrets[0].name          -> query.ingress.grpc.secrets[0].name
querier.ingress.grpc.secrets[0].certificate   -> query.ingress.grpc.secrets[0].certificate
querier.ingress.grpc.secrets[0].key           -> query.ingress.grpc.secrets[0].key

To 3.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

To 2.4.0

The Ingress API object name for Querier changes from {{ include "common.names.fullname" . }} to {{ include "common.names.fullname" . }}-querier.

NOTE

: Which in most cases (depending on any set values in fullnameOverride or nameOverride) resolves to the used Helm release name (.Release.Name).

To 2.0.0

The format of the chart’s extraFlags option has been updated to be an array (instead of an object), to support passing multiple flags with the same name to Thanos.

Now you need to specify the flags in the following way in your values file (where component is one of querier/bucketweb/compactor/storegateway/ruler):

component:
  ...
  extraFlags
    - --sync-block-duration=3m
    - --chunk-pool-size=2GB

To specify the values via CLI::

--set 'component.extraFlags[0]=--sync-block-duration=3m' --set 'ruler.extraFlags[1]=--chunk-pool-size=2GB'

To 1.0.0

If you are upgrading from a <1.0.0 release you need to move your Querier Ingress information to the new values settings:

ingress.enabled -> querier.ingress.enabled
ingress.certManager -> querier.ingress.certManager
ingress.hostname -> querier.ingress.hostname
ingress.annotations -> querier.ingress.annotations
ingress.extraHosts[0].name -> querier.ingress.extraHosts[0].name
ingress.extraHosts[0].path -> querier.ingress.extraHosts[0].path
ingress.extraHosts[0].hosts[0] -> querier.ingress.extraHosts[0].hosts[0]
ingress.extraHosts[0].secretName -> querier.ingress.extraHosts[0].secretName
ingress.secrets[0].name -> querier.ingress.secrets[0].name
ingress.secrets[0].certificate -> querier.ingress.secrets[0].certificate
ingress.secrets[0].key -> querier.ingress.secrets[0].key

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.