Bitnami package for Odoo

Odoo is an open source ERP and CRM platform, formerly known as OpenERP, that can connect a wide variety of business operations such as sales, supply chain, finance, and project management.

Overview of Odoo

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Odoo deployment on a Kubernetes cluster using the Helm package manager.

Odoo Apps can be used as stand-alone applications, but they also integrate seamlessly so you get a full-featured Open Source ERP when you install several Apps.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

  • Kubernetes 1.23+
  • Helm 3.8.0+
  • PV provisioner support in the underlying infrastructure
  • ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys Odoo on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Use a different Odoo version

To modify the application version used in this chart, specify a different version of the image using the image.tag parameter and/or a different repository using the image.repository parameter.

Using an external database

Sometimes you may want to have Odoo connect to an external database rather than installing one inside your cluster, e.g. to use a managed database service, or use a single database server for all your applications. To do this, the chart allows you to specify credentials for an external database under the externalDatabase parameter. You should also disable the PostgreSQL installation with the postgresql.enabled option. For example using the following parameters:

postgresql.enabled=false
externalDatabase.host=myexternalhost
externalDatabase.user=myuser
externalDatabase.password=mypassword
externalDatabase.port=3306

Note also if you disable PostgreSQL per above you MUST supply values for the externalDatabase connection.

Sidecars and Init Containers

If you have a need for additional containers to run within the same pod as Odoo, you can do so via the sidecars config parameter. Simply define your container according to the Kubernetes container spec.

sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
       containerPort: 1234

Similarly, you can add extra init containers using the initContainers parameter.

Setting Pod’s affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

Persistence

The Bitnami Odoo image stores the Odoo data and configurations at the /bitnami/odoo path of the container.

Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters section to configure the PVC or to disable persistence.

Parameters

Global parameters

Name Description Value
global.imageRegistry Global Docker image registry ""
global.imagePullSecrets Global Docker registry secret names as an array []
global.defaultStorageClass Global default StorageClass for Persistent Volume(s) ""
global.storageClass DEPRECATED: use global.defaultStorageClass instead ""
global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation) disabled

Common parameters

Name Description Value
kubeVersion Override Kubernetes version ""
nameOverride String to partially override common.names.fullname ""
fullnameOverride String to fully override common.names.fullname ""
commonLabels Labels to add to all deployed objects {}
commonAnnotations Annotations to add to all deployed objects {}
clusterDomain Default Kubernetes cluster domain cluster.local
extraDeploy Array of extra objects to deploy with the release []
diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden) false
diagnosticMode.command Command to override all containers in the the statefulset ["sleep"]
diagnosticMode.args Args to override all containers in the the statefulset ["infinity"]
image.registry Odoo image registry REGISTRY_NAME
image.repository Odoo image repository REPOSITORY_NAME/odoo
image.digest Odoo image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag ""
image.pullPolicy Odoo image pull policy IfNotPresent
image.pullSecrets Odoo image pull secrets []
image.debug Enable image debug mode false

Odoo Configuration parameters

Name Description Value
odooEmail Odoo user email [email protected]
odooPassword Odoo user password ""
odooSkipInstall Skip Odoo installation wizard false
odooDatabaseFilter Filter odoo database by using a regex .*
loadDemoData Whether to load demo data for all modules during initialization false
customPostInitScripts Custom post-init.d user scripts {}
smtpHost SMTP server host ""
smtpPort SMTP server port ""
smtpUser SMTP username ""
smtpPassword SMTP user password ""
smtpProtocol SMTP protocol ""
existingSecret Name of existing secret containing Odoo credentials ""
smtpExistingSecret The name of an existing secret with SMTP credentials ""
allowEmptyPassword Allow the container to be started with blank passwords false
command Override default container command (useful when using custom images) []
args Override default container args (useful when using custom images) []
extraEnvVars Array with extra environment variables to add to the Odoo container []
extraEnvVarsCM Name of existing ConfigMap containing extra env vars ""
extraEnvVarsSecret Name of existing Secret containing extra env vars ""

Odoo deployment parameters

Name Description Value
replicaCount Number of Odoo replicas to deploy 1
containerPorts.http Odoo HTTP container port 8069
extraContainerPorts Optionally specify extra list of additional ports for Odoo container(s) []
resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production). large
resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}
podSecurityContext.enabled Enabled Odoo pods’ Security Context true
podSecurityContext.fsGroupChangePolicy Set filesystem group change policy Always
podSecurityContext.sysctls Set kernel settings using the sysctl interface []
podSecurityContext.supplementalGroups Set filesystem extra groups []
podSecurityContext.fsGroup Set Odoo pod’s Security Context fsGroup 0
containerSecurityContext.enabled Enabled containers’ Security Context true
containerSecurityContext.seLinuxOptions Set SELinux options in container {}
containerSecurityContext.runAsUser Set containers’ Security Context runAsUser 0
containerSecurityContext.runAsGroup Set containers’ Security Context runAsGroup 0
containerSecurityContext.runAsNonRoot Set container’s Security Context runAsNonRoot false
containerSecurityContext.privileged Set container’s Security Context privileged false
containerSecurityContext.readOnlyRootFilesystem Set container’s Security Context readOnlyRootFilesystem false
containerSecurityContext.allowPrivilegeEscalation Set container’s Security Context allowPrivilegeEscalation false
containerSecurityContext.capabilities.add List of capabilities to be added ["CHOWN","FOWNER","SYS_CHROOT","SETGID","SETUID","DAC_OVERRIDE"]
containerSecurityContext.capabilities.drop List of capabilities to be dropped ["ALL"]
containerSecurityContext.seccompProfile.type Set container’s Security Context seccomp profile RuntimeDefault
livenessProbe.enabled Enable livenessProbe true
livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe 600
livenessProbe.periodSeconds Period seconds for livenessProbe 30
livenessProbe.timeoutSeconds Timeout seconds for livenessProbe 5
livenessProbe.failureThreshold Failure threshold for livenessProbe 6
livenessProbe.successThreshold Success threshold for livenessProbe 1
readinessProbe.enabled Enable readinessProbe true
readinessProbe.path Path to check for readinessProbe /web/health
readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe 30
readinessProbe.periodSeconds Period seconds for readinessProbe 10
readinessProbe.timeoutSeconds Timeout seconds for readinessProbe 5
readinessProbe.failureThreshold Failure threshold for readinessProbe 12
readinessProbe.successThreshold Success threshold for readinessProbe 1
startupProbe.enabled Enable startupProbe false
startupProbe.path Path to check for startupProbe /web/health
startupProbe.initialDelaySeconds Initial delay seconds for startupProbe 300
startupProbe.periodSeconds Period seconds for startupProbe 10
startupProbe.timeoutSeconds Timeout seconds for startupProbe 5
startupProbe.failureThreshold Failure threshold for startupProbe 6
startupProbe.successThreshold Success threshold for startupProbe 1
customLivenessProbe Custom livenessProbe that overrides the default one {}
customReadinessProbe Custom readinessProbe that overrides the default one {}
customStartupProbe Custom startupProbe that overrides the default one {}
lifecycleHooks LifecycleHooks to set additional configuration at startup {}
automountServiceAccountToken Mount Service Account token in pod false
hostAliases Odoo pod host aliases []
podLabels Extra labels for Odoo pods {}
podAnnotations Annotations for Odoo pods {}
podAffinityPreset Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard ""
podAntiAffinityPreset Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard soft
nodeAffinityPreset.type Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard ""
nodeAffinityPreset.key Node label key to match. Ignored if affinity is set ""
nodeAffinityPreset.values Node label values to match. Ignored if affinity is set []
affinity Affinity for pod assignment {}
nodeSelector Node labels for pod assignment {}
tolerations Tolerations for pod assignment []
topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template []
priorityClassName Odoo pods’ Priority Class Name ""
schedulerName Use an alternate scheduler, e.g. “stork”. ""
terminationGracePeriodSeconds Seconds Odoo pod needs to terminate gracefully ""
updateStrategy.type Odoo deployment strategy type RollingUpdate
updateStrategy.rollingUpdate Odoo deployment rolling update configuration parameters nil
extraVolumes Optionally specify extra list of additional volumes for Odoo pods []
extraVolumeMounts Optionally specify extra list of additional volumeMounts for Odoo container(s) []
sidecars Add additional sidecar containers to the Odoo pod []
initContainers Add additional init containers to the Odoo pods []

Traffic Exposure Parameters

Name Description Value
service.type Odoo service type LoadBalancer
service.ports.http Odoo service HTTP port 80
service.nodePorts.http NodePort for the Odoo HTTP endpoint ""
service.sessionAffinity Control where client requests go, to the same pod or round-robin None
service.sessionAffinityConfig Additional settings for the sessionAffinity {}
service.clusterIP Odoo service Cluster IP ""
service.loadBalancerIP Odoo service Load Balancer IP ""
service.loadBalancerSourceRanges Odoo service Load Balancer sources []
service.externalTrafficPolicy Odoo service external traffic policy Cluster
service.annotations Additional custom annotations for Odoo service {}
service.extraPorts Extra port to expose on Odoo service []
ingress.enabled Enable ingress record generation for Odoo false
ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+) ""
ingress.pathType Ingress path type ImplementationSpecific
ingress.apiVersion Force Ingress API version (automatically detected if not set) ""
ingress.hostname Default host for the ingress record odoo.local
ingress.path Default path for the ingress record /
ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations. {}
ingress.tls Enable TLS configuration for the host defined at ingress.hostname parameter false
ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm false
ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record []
ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host []
ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record []
ingress.secrets Custom TLS certificates as secrets []
ingress.extraRules Additional rules to be covered with this ingress record []

Persistence Parameters

Name Description Value
persistence.enabled Enable persistence using Persistent Volume Claims true
persistence.resourcePolicy Setting it to “keep” to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted ""
persistence.storageClass Persistent Volume storage class ""
persistence.accessModes Persistent Volume access modes []
persistence.accessMode Persistent Volume access mode (DEPRECATED: use persistence.accessModes instead) ReadWriteOnce
persistence.size Persistent Volume size 10Gi
persistence.dataSource Custom PVC data source {}
persistence.annotations Annotations for the PVC {}
persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template) {}
persistence.existingClaim The name of an existing PVC to use for persistence ""
volumePermissions.enabled Enable init container that changes the owner/group of the PV mount point to runAsUser:fsGroup false
volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production). nano
volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}
volumePermissions.containerSecurityContext.enabled Enable init container’s Security Context true
volumePermissions.containerSecurityContext.seLinuxOptions Set SELinux options in container {}
volumePermissions.containerSecurityContext.runAsUser Set init container’s Security Context runAsUser 0
volumePermissions.containerSecurityContext.seccompProfile.type Set container’s Security Context seccomp profile RuntimeDefault

RBAC Parameters

Name Description Value
serviceAccount.create Specifies whether a ServiceAccount should be created true
serviceAccount.name The name of the ServiceAccount to create (name generated using common.names.fullname template otherwise) ""
serviceAccount.automountServiceAccountToken Auto-mount the service account token in the pod false
serviceAccount.annotations Additional custom annotations for the ServiceAccount {}

Other Parameters

Name Description Value
pdb.create Enable a Pod Disruption Budget creation true
pdb.minAvailable Minimum number/percentage of pods that should remain scheduled ""
pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both pdb.minAvailable and pdb.maxUnavailable are empty. ""
autoscaling.enabled Enable Horizontal POD autoscaling for Odoo false
autoscaling.minReplicas Minimum number of Odoo replicas 1
autoscaling.maxReplicas Maximum number of Odoo replicas 11
autoscaling.targetCPU Target CPU utilization percentage 50
autoscaling.targetMemory Target Memory utilization percentage 50

Database Parameters

Name Description Value
postgresql.enabled Switch to enable or disable the PostgreSQL helm chart true
postgresql.auth.username Name for a custom user to create bn_odoo
postgresql.auth.password Password for the custom user to create ""
postgresql.auth.database Name for a custom database to create bitnami_odoo
postgresql.auth.existingSecret Name of existing secret to use for PostgreSQL credentials ""
postgresql.architecture PostgreSQL architecture (standalone or replication) standalone
externalDatabase.host Database host ""
externalDatabase.port Database port number 5432
externalDatabase.user Non-root username for Odoo bn_odoo
externalDatabase.password Password for the non-root username for Odoo ""
externalDatabase.database Odoo database name bitnami_odoo
externalDatabase.create Enable PostgreSQL user and database creation (when using an external db) true
externalDatabase.postgresqlPostgresUser External Database admin username postgres
externalDatabase.postgresqlPostgresPassword External Database admin password ""
externalDatabase.existingSecret Name of an existing secret resource containing the database credentials ""
externalDatabase.existingSecretPasswordKey Name of an existing secret key containing the non-root credentials ""
externalDatabase.existingSecretPostgresPasswordKey Name of an existing secret key containing the admin credentials ""

NetworkPolicy parameters

Name Description Value
networkPolicy.enabled Specifies whether a NetworkPolicy should be created true
networkPolicy.allowExternal Don’t require server label for connections true
networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations. true
networkPolicy.extraIngress Add extra ingress rules to the NetworkPolicy []
networkPolicy.extraEgress Add extra ingress rules to the NetworkPolicy []
networkPolicy.ingressNSMatchLabels Labels to match to allow traffic from other namespaces {}
networkPolicy.ingressNSPodMatchLabels Pod labels to match to allow traffic from other namespaces {}

The above parameters map to the env variables defined in bitnami/odoo. For more information please refer to the bitnami/odoo image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set odooPassword=password,postgresql.postgresPassword=secretpassword \
    oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the Odoo administrator account password to password and the PostgreSQL postgres user password to secretpassword.

NOTE: Once this chart is deployed, it is not possible to change the application’s access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application’s built-in administrative tools if available.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/odoo

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 27.0.0

This major updates the PostgreSQL subchart to its newest major, 16.0.0, which uses PostgreSQL 17.x. Follow the official instructions to upgrade to 17.x.

To 26.0.0

This major bump changes the following security defaults:

  • resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
  • global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.
  • The networkPolicy section has been normalized amongst all Bitnami charts. Compared to the previous approach, the values section has been simplified (check the Parameters section) and now it set to enabled=true by default. Egress traffic is allowed by default and ingress traffic is allowed by all pods but only to the ports set in containerPorts and extraContainerPorts.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

Also, this major release bumps the PostgreSQL chart version to 15.x.x.

To 24.0.0

This major updates the PostgreSQL subchart to its newest major, 13.0.0. Here you can find more information about the changes introduced in that version.

To 23.0.0

This major updates the PostgreSQL subchart to its newest major, 12.0.0. Here you can find more information about the changes introduced in that version.

To 21.0.0

This major release updates the PostgreSQL subchart to its newest major 11.x.x, which contain several changes in the supported values (check the upgrade notes to obtain more information).

Upgrading Instructions

To upgrade to 21.0.0 from 20.x, it should be done reusing the PVC(s) used to hold the data on your previous release. To do so, follow the instructions below (the following example assumes that the release name is odoo and the release namespace default):

  1. Obtain the credentials and the names of the PVCs used to hold the data on your current release:
export ODOO_PASSWORD=$(kubectl get secret --namespace default odoo -o jsonpath="{.data.odoo-password}" | base64 --decode)
export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default odoo-postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app.kubernetes.io/instance=odoo,app.kubernetes.io/name=postgresql,role=primary -o jsonpath="{.items[0].metadata.name}")
  1. Delete the PostgreSQL statefulset (notice the option –cascade=false) and secret:
kubectl delete statefulsets.apps --cascade=false odoo-postgresql
kubectl delete secret odoo-postgresql --namespace default
  1. Upgrade your release using the same PostgreSQL version:
CURRENT_PG_VERSION=$(kubectl exec odoo-postgresql-0 -- bash -c 'echo $BITNAMI_IMAGE_VERSION')
helm upgrade odoo bitnami/odoo \
  --set odooPassword=$ODOO_PASSWORD \
  --set postgresql.image.tag=$CURRENT_PG_VERSION \
  --set postgresql.auth.password=$POSTGRESQL_PASSWORD \
  --set postgresql.persistence.existingClaim=$POSTGRESQL_PVC
  1. Delete the existing PostgreSQL pods and the new statefulset will create a new one:
kubectl delete pod odoo-postgresql-0

19.0.0

The Bitnami Odoo image was refactored and now the source code is published in GitHub in the rootfs folder of the container image repository.

How to upgrade to version 19.0.0

To upgrade to 19.0.0 from 18.x, it should be done enabling the “volumePermissions” init container. To do so, follow the instructions below (the following example assumes that the release name is odoo and the release namespace default):

  1. Obtain the credentials and the names of the PVCs used to hold the data on your current release:
export ODOO_PASSWORD=$(kubectl get secret --namespace default odoo -o jsonpath="{.data.odoo-password}" | base64 --decode)
export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default odoo-postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app.kubernetes.io/instance=odoo,app.kubernetes.io/name=postgresql,role=primary -o jsonpath="{.items[0].metadata.name}")
  1. Upgrade your release:
helm upgrade odoo bitnami/odoo \
  --set odooPassword=$ODOO_PASSWORD \
  --set postgresql.auth.password=$POSTGRESQL_PASSWORD \
  --set postgresql.persistence.existingClaim=$POSTGRESQL_PVC \
  --set volumePermissions.enabled=true

Full compatibility is not guaranteed due to the amount of involved changes, however no breaking changes are expected aside from the ones mentioned above.

To 18.0.0

This version standardizes the way of defining Ingress rules. When configuring a single hostname for the Ingress rule, set the ingress.hostname value. When defining more than one, set the ingress.extraHosts array. Apart from this case, no issues are expected to appear when upgrading.

To 17.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

  • Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
  • Move dependency information from the requirements.yaml to the Chart.yaml
  • After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
  • The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Chart.
  • Additionally updates the PostgreSQL subchart to its newest major 10.x.x, which contains similar changes.

Considerations when upgrading to this version

  • If you want to upgrade to this version using Helm v2, this scenario is not supported as this version does not support Helm v2 anymore.
  • If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3.

Useful links

How to upgrade to version 17.0.0

To upgrade to 17.0.0 from 16.x, it should be done reusing the PVC(s) used to hold the data on your previous release. To do so, follow the instructions below (the following example assumes that the release name is odoo and the release namespace default):

  1. Obtain the credentials and the names of the PVCs used to hold the data on your current release:
export ODOO_PASSWORD=$(kubectl get secret --namespace default odoo -o jsonpath="{.data.odoo-password}" | base64 --decode)
export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default odoo-postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app.kubernetes.io/instance=odoo,app.kubernetes.io/name=postgresql,role=master -o jsonpath="{.items[0].metadata.name}")
  1. Delete the PostgreSQL statefulset (notice the option –cascade=false):
kubectl delete statefulsets.apps --cascade=false odoo-postgresql
  1. Upgrade your release:
helm upgrade odoo bitnami/odoo \
  --set odooPassword=$ODOO_PASSWORD \
  --set postgresql.auth.password=$POSTGRESQL_PASSWORD \
  --set postgresql.persistence.existingClaim=$POSTGRESQL_PVC
  1. Delete the existing PostgreSQL pods and the new statefulset will create a new one:
kubectl delete pod odoo-postgresql-0

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

check-circle-line exclamation-circle-line close-line
Scroll to top icon