Bitnami package for Parse Server

Parse is a platform that enables users to add a scalable and powerful backend to launch a full-featured app for iOS, Android, JavaScript, Windows, Unity, and more.

Overview of Parse Server

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/parse

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps a Parse deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/parse

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys Parse on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Deploy your Cloud functions with Parse Cloud Code

The Bitnami Parse image allows you to deploy your Cloud functions with Parse Cloud Code (a feature which allows running a piece of code in your Parse Server instead of the user’s mobile devices). In order to add your custom scripts, they must be located inside the chart folder files/cloud so they can be consumed as a ConfigMap.

Alternatively, you can specify custom scripts using the cloudCodeScripts parameter as dict.

In addition to these options, you can also set an external ConfigMap with all the Cloud Code scripts. This is done by setting the existingCloudCodeScriptsCM parameter. Note that this will override the two previous options.

Adding extra environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars (available in the server and dashboard sections) property.

extraEnvVars:
  - name: PARSE_SERVER_ALLOW_CLIENT_CLASS_CREATION
    value: true

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Deploying extra resources

There are cases where you may want to deploy extra objects, such as KongPlugins, KongConsumers, amongst others. For covering this case, the chart allows adding the full specification of other objects using the extraDeploy parameter. The following example would activate a plugin at deployment time.

## Extra objects to deploy (value evaluated as a template)
##
extraDeploy: |-
  - apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: {{ include "common.names.fullname" . }}-privileged
      namespace: {{ .Release.Namespace }}
      labels: {{- include "common.labels.standard" ( dict "customLabels" .Values.commonLabels "context" $ ) | nindent 6 }}
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: ClusterRole
      name: cluster-admin
    subjects:
      - kind: ServiceAccount
        name: default
        namespace: {{ .Release.Namespace }}

Setting Pod’s affinity

This chart allows you to set your custom affinity using the XXX.affinity paremeter(s). Find more infomation about Pod’s affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami Parse image stores the Parse data and configurations at the /bitnami/parse path of the container.

Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters section to configure the PVC or to disable persistence.

Adjust permissions of persistent volume mountpoint

As the image run as non-root by default, it is necessary to adjust the ownership of the persistent volume so that the container can write data into it.

By default, the chart is configured to use Kubernetes Security Context to automatically change the ownership of the volume. However, this feature does not work in all Kubernetes distributions. As an alternative, this chart supports using an initContainer to change the ownership of the volume before mounting it in the final destination.

You can enable this initContainer by setting volumePermissions.enabled to true.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common Parameters

Name	Description	Value
nameOverride	String to partially override common.names.fullname template (will maintain the release name)	""
fullnameOverride	String to fully override common.names.fullname template	""
namespaceOverride	String to fully override common.names.namespace	""
kubeVersion	Force target Kubernetes version (using Helm capabilites if not set)	""
commonLabels	Add labels to all the deployed resources	{}
commonAnnotations	Add annotations to all the deployed resources	{}
extraDeploy	Array of extra objects to deploy with the release	[]
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the deployment	["sleep"]
diagnosticMode.args	Args to override all containers in the deployment	["infinity"]

Parse server parameters

Name	Description	Value
server.image.registry	Parse image registry	REGISTRY_NAME
server.image.repository	Parse image repository	REPOSITORY_NAME/parse
server.image.digest	Parse image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
server.image.pullPolicy	Image pull policy	IfNotPresent
server.image.pullSecrets	Specify docker-registry secret names as an array	[]
server.image.debug	Enable image debug mode	false
server.automountServiceAccountToken	Mount Service Account token in pod	false
server.hostAliases	Deployment pod host aliases	[]
server.podLabels	Extra labels for Parse pods	{}
server.podAnnotations	Annotations for Parse pods	{}
server.forceOverwriteConfFile	Overwrite config.json configuration file on each run (set to false if mounting a custom configuration file)	true
server.podSecurityContext.enabled	Enabled Parse Dashboard pods’ Security Context	true
server.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
server.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
server.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
server.podSecurityContext.fsGroup	Set Parse Dashboard pod’s Security Context fsGroup	1001
server.containerSecurityContext.enabled	Enabled containers’ Security Context	true
server.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
server.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
server.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
server.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
server.containerSecurityContext.privileged	Set container’s Security Context privileged	false
server.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
server.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
server.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
server.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
server.command	Override default container command (useful when using custom images)	[]
server.args	Override default container args (useful when using custom images)	[]
server.containerPorts.http	Parse server port	1337
server.mountPath	Parse server API mount path	/parse
server.appId	Parse server App ID	myappID
server.masterKey	Parse server Master Key	""
server.masterKeyIps	Parse server Master setting an allowed IP address	0.0.0.0/0
server.extraEnvVars	An array to add extra env vars	[]
server.extraEnvVarsCM	Name of a ConfigMap containing extra environment variables	""
server.extraEnvVarsSecret	Name of a Secret containing extra environment variables	""
server.extraVolumes	Optionally specify extra list of additional volumes for the Parse pod(s)	[]
server.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Parse container(s)	[]
server.sidecars	Add additional sidecar containers to the Parse pod(s)	[]
server.initContainers	Add additional init containers to the Parse pod(s)	[]
server.pdb.create	Enable/disable a Pod Disruption Budget creation	true
server.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
server.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both server.pdb.minAvailable and server.pdb.maxUnavailable are empty.	""
server.enableCloudCode	Enable Parse Cloud Code	false
server.cloudCodeScripts	Cloud Code scripts	{}
server.existingCloudCodeScriptsCM	ConfigMap with Cloud Code scripts (Note: Overrides cloudCodeScripts).	""
server.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if server.resources is set (server.resources is recommended for production).	nano
server.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
server.livenessProbe.enabled	Enable livenessProbe	true
server.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	120
server.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
server.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
server.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
server.livenessProbe.successThreshold	Success threshold for livenessProbe	1
server.readinessProbe.enabled	Enable readinessProbe	true
server.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
server.readinessProbe.periodSeconds	Period seconds for readinessProbe	5
server.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
server.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
server.readinessProbe.successThreshold	Success threshold for readinessProbe	1
server.startupProbe.enabled	Enable startupProbe on Parse containers	false
server.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
server.startupProbe.periodSeconds	Period seconds for startupProbe	3
server.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
server.startupProbe.failureThreshold	Failure threshold for startupProbe	15
server.startupProbe.successThreshold	Success threshold for startupProbe	1
server.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
server.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
server.customStartupProbe	Custom startupProbe that overrides the default one	{}
server.podAffinityPreset	Parse server pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
server.podAntiAffinityPreset	Parse server pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
server.nodeAffinityPreset.type	Parse server node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
server.nodeAffinityPreset.key	Parse server node label key to match Ignored if affinity is set.	""
server.nodeAffinityPreset.values	Parse server node label values to match. Ignored if affinity is set.	[]
server.affinity	Parse server affinity for pod assignment	{}
server.nodeSelector	Parse server node labels for pod assignment	{}
server.tolerations	Parse server tolerations for pod assignment	[]
server.updateStrategy.type	Parse statefulset strategy type	RollingUpdate
server.priorityClassName	Parse pods’ priorityClassName	""
server.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
server.schedulerName	Name of the k8s scheduler (other than default) for Parse pods	""
server.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
server.lifecycleHooks	for the Parse container(s) to automate configuration before or after startup	{}
server.service.type	Kubernetes Service type	LoadBalancer
server.service.ports.http	Service HTTP port (Dashboard)	1337
server.service.nodePorts.http	Kubernetes HTTP node port	""
server.service.clusterIP	Service Cluster IP	""
server.service.loadBalancerIP	Service Load Balancer IP	""
server.service.loadBalancerSourceRanges	Service Load Balancer sources	[]
server.service.externalTrafficPolicy	Service external traffic policy	Cluster
server.service.annotations	Additional custom annotations for Service	{}
server.service.extraPorts	Extra ports to expose in Service (normally used with the sidecars value)	[]
server.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
server.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
server.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
server.networkPolicy.allowExternal	Don’t require server label for connections	true
server.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
server.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
server.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
server.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
server.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Dashboard Parameters

Name	Description	Value
dashboard.enabled	Enable parse dashboard	true
dashboard.image.registry	Dashboard image registry	REGISTRY_NAME
dashboard.image.repository	Dashboard image repository	REPOSITORY_NAME/parse-dashboard
dashboard.image.digest	Dashboard image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
dashboard.image.pullPolicy	image pull policy	IfNotPresent
dashboard.image.pullSecrets	Specify docker-registry secret names as an array	[]
dashboard.image.debug	Enable Parse Dashboard image debug mode	false
dashboard.replicaCount	Number of Parse Dashboard replicas to deploy	1
dashboard.containerPorts.http	Parse Dashboard HTTP container port	4040
dashboard.automountServiceAccountToken	Mount Service Account token in pod	false
dashboard.hostAliases	Deployment pod host aliases	[]
dashboard.podSecurityContext.enabled	Enabled Parse Dashboard pods’ Security Context	true
dashboard.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
dashboard.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
dashboard.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
dashboard.podSecurityContext.fsGroup	Set Parse Dashboard pod’s Security Context fsGroup	1001
dashboard.containerSecurityContext.enabled	Enabled containers’ Security Context	true
dashboard.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
dashboard.containerSecurityContext.runAsUser	Set containers’ Security Context runAsUser	1001
dashboard.containerSecurityContext.runAsGroup	Set containers’ Security Context runAsGroup	1001
dashboard.containerSecurityContext.runAsNonRoot	Set container’s Security Context runAsNonRoot	true
dashboard.containerSecurityContext.privileged	Set container’s Security Context privileged	false
dashboard.containerSecurityContext.readOnlyRootFilesystem	Set container’s Security Context readOnlyRootFilesystem	true
dashboard.containerSecurityContext.allowPrivilegeEscalation	Set container’s Security Context allowPrivilegeEscalation	false
dashboard.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
dashboard.containerSecurityContext.seccompProfile.type	Set container’s Security Context seccomp profile	RuntimeDefault
dashboard.command	Override default container command (useful when using custom images)	[]
dashboard.args	Override default container args (useful when using custom images)	[]
dashboard.username	Parse Dashboard application username	user
dashboard.password	Parse Dashboard application password	""
dashboard.appName	Parse Dashboard application name	MyDashboard
dashboard.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if dashboard.resources is set (dashboard.resources is recommended for production).	nano
dashboard.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
dashboard.livenessProbe.enabled	Enable livenessProbe	true
dashboard.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	240
dashboard.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
dashboard.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
dashboard.livenessProbe.failureThreshold	Failure threshold for livenessProbe	5
dashboard.livenessProbe.successThreshold	Success threshold for livenessProbe	1
dashboard.readinessProbe.enabled	Enable readinessProbe	true
dashboard.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	30
dashboard.readinessProbe.periodSeconds	Period seconds for readinessProbe	5
dashboard.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
dashboard.readinessProbe.failureThreshold	Failure threshold for readinessProbe	5
dashboard.readinessProbe.successThreshold	Success threshold for readinessProbe	1
dashboard.startupProbe.enabled	Enable startupProbe on Parse Dashboard containers	false
dashboard.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	0
dashboard.startupProbe.periodSeconds	Period seconds for startupProbe	3
dashboard.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	2
dashboard.startupProbe.failureThreshold	Failure threshold for startupProbe	15
dashboard.startupProbe.successThreshold	Success threshold for startupProbe	1
dashboard.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
dashboard.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
dashboard.customStartupProbe	Custom startupProbe that overrides the default one	{}
dashboard.podLabels	Extra labels for Parse Dashboard pods	{}
dashboard.podAnnotations	Annotations for Parse Dashboard pods	{}
dashboard.podAffinityPreset	Parse dashboard pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard	""
dashboard.podAntiAffinityPreset	Parse dashboard pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard	soft
dashboard.nodeAffinityPreset.type	Parse dashboard node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard	""
dashboard.nodeAffinityPreset.key	Parse dashboard node label key to match Ignored if affinity is set.	""
dashboard.nodeAffinityPreset.values	Parse dashboard node label values to match. Ignored if affinity is set.	[]
dashboard.affinity	Parse dashboard affinity for pod assignment	{}
dashboard.nodeSelector	Parse dashboard node labels for pod assignment	{}
dashboard.tolerations	Parse dashboard tolerations for pod assignment	[]
dashboard.updateStrategy.type	Parse statefulset strategy type	RollingUpdate
dashboard.priorityClassName	Parse pods’ priorityClassName	""
dashboard.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
dashboard.schedulerName	Name of the k8s scheduler (other than default) for Parse pods	""
dashboard.terminationGracePeriodSeconds	Seconds Redmine pod needs to terminate gracefully	""
dashboard.lifecycleHooks	for the Parse container(s) to automate configuration before or after startup	{}
dashboard.parseServerUrlProtocol	Protocol used by Parse Dashboard to form the URLs to Parse server	http
dashboard.extraEnvVars	An array to add extra env vars	[]
dashboard.extraEnvVarsCM	Name of a ConfigMap containing extra environment variables	""
dashboard.extraEnvVarsSecret	Name of a Secret containing extra environment variables	""
dashboard.extraVolumes	Optionally specify extra list of additional volumes for the Parse pod(s)	[]
dashboard.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the Parse container(s)	[]
dashboard.sidecars	Add additional sidecar containers to the Parse pod(s)	[]
dashboard.initContainers	Add additional init containers to the Parse pod(s)	[]
dashboard.pdb.create	Enable/disable a Pod Disruption Budget creation	true
dashboard.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
dashboard.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both dashboard.pdb.minAvailable and dashboard.pdb.maxUnavailable are empty.	""
dashboard.forceOverwriteConfFile	Overwrite config.json configuration file on each run (set to false if mounting a custom configuration file)	true
dashboard.service.type	Kubernetes Service type	LoadBalancer
dashboard.service.ports.http	Service HTTP port (Dashboard)	80
dashboard.service.nodePorts.http	Kubernetes HTTP node port	""
dashboard.service.clusterIP	Service Cluster IP	""
dashboard.service.loadBalancerIP	Service Load Balancer IP	""
dashboard.service.loadBalancerSourceRanges	Service Load Balancer sources	[]
dashboard.service.externalTrafficPolicy	Service external traffic policy	Cluster
dashboard.service.annotations	Additional custom annotations for Service	{}
dashboard.service.extraPorts	Extra ports to expose in Service (normally used with the sidecars value)	[]
dashboard.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
dashboard.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
dashboard.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
dashboard.networkPolicy.allowExternal	Don’t require label for connections	true
dashboard.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
dashboard.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
dashboard.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
dashboard.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
dashboard.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}

Traffic Exposure Parameters

Name	Description	Value
ingress.enabled	Set to true to enable ingress record generation	false
ingress.ingressClassName	IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)	""
ingress.tls	Enable TLS configuration for the hostname defined at ingress.hostname parameter	false
ingress.selfSigned	Create a TLS secret for this ingress record using self-signed certificates generated by Helm	false
ingress.annotations	Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.	{}
ingress.dashboard.hostname	Default host for the ingress resource	parse-dashboard.local
ingress.dashboard.path	The Path to Parse. You may need to set this to ‘/*’ in order to use this with ALB ingress controllers.	/
ingress.dashboard.pathType	Ingress path type	ImplementationSpecific
ingress.dashboard.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
ingress.dashboard.extraPaths	Any additional arbitrary paths that may need to be added to the ingress under the main host.	[]
ingress.server.hostname	Default host for the ingress resource	parse-server.local
ingress.server.path	Default path for the ingress resource*’ in order to use this with ALB ingress controllers.	/
ingress.server.pathType	Ingress path type	ImplementationSpecific
ingress.server.extraHosts	The list of additional hostnames to be covered with this ingress record.	[]
ingress.server.extraPaths	Any additional arbitrary paths that may need to be added to the ingress under the main host.	[]
ingress.extraTls	The tls configuration for additional hostnames to be covered with this ingress record.	[]
ingress.secrets	If you’re providing your own certificates, please use this to add the certificates as secrets	[]
ingress.extraRules	Additional rules to be covered with this ingress record	[]

Persistence Parameters

Name	Description	Value
persistence.enabled	Enable Parse persistence using PVC	true
persistence.storageClass	PVC Storage Class for Parse volume	""
persistence.accessModes	PVC Access Mode for Parse volume	["ReadWriteOnce"]
persistence.size	PVC Storage Request for Parse volume	8Gi
persistence.existingClaim	The name of an existing PVC to use for persistence	""
persistence.selector	Selector to match an existing Persistent Volume for Parse data PVC	{}
persistence.dataSource	Custom PVC data source	{}
persistence.annotations	Persistent Volume Claim annotations	{}

Volume Permissions parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes volume permissions in the data directory (for cases where the default k8s runAsUser and fsUser values do not work)	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image name	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Init container volume-permissions image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	none
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
serviceAccount.create	Specifies whether a ServiceAccount should be created	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.annotations	Additional Service Account annotations (evaluated as a template)	{}
serviceAccount.automountServiceAccountToken	Automount service account token for the server service account	false

MongoDB® Parameters

Name	Description	Value
mongodb.enabled	Enable MongoDB® chart	true
mongodb.auth.enabled	Enable MongoDB® password authentication	true
mongodb.auth.rootPassword	MongoDB® admin password	""
mongodb.auth.username	MongoDB® user	bn_parse
mongodb.auth.password	MongoDB® user password	""
mongodb.auth.database	MongoDB® database	bitnami_parse
mongodb.persistence.enabled	Enable MongoDB® persistence using PVC	true
mongodb.persistence.storageClass	PVC Storage Class for MongoDB® volume	""
mongodb.persistence.accessMode	PVC Access Mode for MongoDB® volume	ReadWriteOnce
mongodb.persistence.size	PVC Storage Request for MongoDB® volume	8Gi
mongodb.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).	small
mongodb.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}

Note

:

For the Parse application function correctly, you should specify the parseHost parameter to specify the FQDN (recommended) or the public IP address of the Parse service.

Optionally, you can specify the loadBalancerIP parameter to assign a reserved IP address to the Parse service of the chart. However please note that this feature is only available on a few cloud providers (f.e. GKE).

To reserve a public IP address on GKE:

$ gcloud compute addresses create parse-public-ip

The reserved IP address can be associated to the Parse service by specifying it as the value of the loadBalancerIP parameter while installing the chart.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set dashboard.username=admin,dashboard.password=password \
    oci://REGISTRY_NAME/REPOSITORY_NAME/parse

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the Parse administrator account username and password to admin and password respectively.

NOTE: Once this chart is deployed, it is not possible to change the application’s access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application’s built-in administrative tools if available.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/parse

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

To 24.0.0

This major updates the MongoDB® subchart to its newest major, 16.0.0. To upgrade to MongoDB 8.0 from a 7.0 deployment, the 7.0 deployment must have featureCompatibilityVersion set to 7.0. Please refer to the official documentation.

To 22.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 21.0.0

This major updates the MongoDB® subchart to its newest major, 14.0.0. No major issues are expected during the upgrade.

To 19.0.0

This major updates the MongoDB® subchart to its newest major, 13.0.0. No major issues are expected during the upgrade.

To 18.0.0

This major release renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repository.

Affected values:

• server.port is renamed to server.containerPorts.http
• service.port is renamed to dashboard.service.ports.http
• metrics.containerPort is renamed to metrics.containerPorts.metrics
• service.nodePort is renamed to dashboard.service.nodePorts.http
• persistence.accessMode is renamed to persistence.accessModes as list
• securityContext is splitted into podSecurityContext and containerSecurityContext and moved into the different sections (mongos, shardsvr.dataNode, shardsvr.arbiterand configsvr):
  • securityContext.fsGroup is renamed to XXX.podSecurityContext.fsGroup
  • securityContext.runAsUser is renamed to XXX.containerSecurityContext.runAsUser
  • securityContext.runAsNonRoot is renamed to XXX.containerSecurityContext.runAsNonRoot

Also MongoDB® subchart container images were updated to 5.0.x and it can affect compatibility with older versions of MongoDB®.

• https://github.com/bitnami/charts/tree/main/bitnami/mongodb#to-1200

To 16.0.0

In this version, the mongodb-exporter bundled as part of the bitnami/mongodb dependency was updated to a new version which, even it is not a major change, can contain breaking changes (from 0.11.X to 0.30.X).

Please visit the release notes from the upstream project at https://github.com/percona/mongodb_exporter/releases

To 15.0.0

The Bitnami Parse and Bitnami Parse Dashboard images were refactored and now the source code is published in GitHub in the rootfs folder of the container images.

Compatibility is not guaranteed due to the amount of involved changes, however no breaking changes are expected.

To 14.0.0

This version standardizes the way of defining Ingress rules. When configuring a single hostname for the Ingress rule, set the ingress.dashboard.hostname and ingress.server.hostname values. When defining more than one, set the ingress.dashboard.extraHosts and ingress.server.extraHosts arrays. Apart from this case, no issues are expected to appear when upgrading.

To 13.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

What changes were introduced in this major version?

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Charts

Considerations when upgrading to this version

• If you want to upgrade to this version from a previous one installed with Helm v3, you shouldn’t face any issues
• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version doesn’t support Helm v2 anymore
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3

Useful links

• https://techdocs.broadcom.com/us/en/vmware-tanzu/application-catalog/tanzu-application-catalog/services/tac-doc/apps-tutorials-resolve-helm2-helm3-post-migration-issues-index.html
• https://helm.sh/docs/topics/v2_v3_migration/
• https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/

To 12.0.0

MongoDB® subchart container images were updated to 4.4.x and it can affect compatibility with older versions of MongoDB®.

• https://github.com/bitnami/charts/tree/main/bitnami/mongodb#to-900

To 11.0.0

Backwards compatibility is not guaranteed since breaking changes were included in MongoDB® subchart. More information in the link below:

• https://github.com/bitnami/charts/tree/main/bitnami/mongodb#to-800

To 10.0.0

Backwards compatibility is not guaranteed. The following notables changes were included:

• parse-dashboard is bumped to the branch 2 (major version)
• Labels are adapted to follow the Helm charts best practices.

To 5.1.0

Parse & Parse Dashboard containers were moved to a non-root approach. There shouldn’t be any issue when upgrading since the corresponding securityContext is enabled by default. Both container images and chart can be upgraded by running the command below:

helm upgrade my-release oci://REGISTRY_NAME/REPOSITORY_NAME/parse

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

If you use a previous container image (previous to 3.1.2-r14 for Parse or 1.2.0-r69 for Parse Dashboard), disable the securityContext by running the command below:

helm upgrade my-release oci://REGISTRY_NAME/REPOSITORY_NAME/parse --set server.securityContext.enabled=false,dashboard.securityContext.enabled=false,server.image.tag=XXX,dashboard.image.tag=YYY

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

To 3.0.0

Backwards compatibility is not guaranteed unless you modify the labels used on the chart’s deployments. Use the workaround below to upgrade from versions previous to 3.0.0. The following example assumes that the release name is parse:

kubectl patch deployment parse-parse-dashboard --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl patch deployment parse-parse-server --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'
kubectl patch deployment parse-mongodb --type=json -p='[{"op": "remove", "path": "/spec/selector/matchLabels/chart"}]'

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.