Bitnami package for ScyllaDB

ScyllaDB is an open-source, distributed NoSQL wide-column data store. Written in C++, it is designed for high throughput and low latency, compatible with Apache Cassandra.

Overview of ScyllaDB

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/scylladb

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository.

Introduction

This chart bootstraps an ScyllaDB deployment on a Kubernetes cluster using the Helm package manager.

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

  • Kubernetes 1.23+
  • Helm 3.8.0+
  • PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/scylladb

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

These commands deploy one node with ScyllaDB on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling vs Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Enable TLS

This chart supports TLS between client and server and between nodes, as explained below:

  • For internode cluster encryption, set the tls.internodeEncryption chart parameter to a value different from none. Available values are all, dc or rack.
  • For client-server encryption, set the tls.clientEncryption chart parameter to true.

In both cases, it is also necessary to create a secret containing the certificate. This secret is to be passed to the chart via the tls.existingSecret parameter at deployment-time, as shown below:

tls.internodeEncryption=all
tls.clientEncryption=true
tls.existingSecret=my-exisiting-stores

You can manually create the required TLS certificates or relying on the chart auto-generation capabilities. The chart supports two different ways to auto-generate the required certificates:

  • Using Helm capabilities. Enable this feature by setting tls.autoGenerated.enabled to true and tls.autoGenerated.engine to helm.
  • Relying on CertManager (please note it’s required to have CertManager installed in your K8s cluster). Enable this feature by setting tls.autoGenerated.enabled to true and tls.autoGenerated.engine to cert-manager. Please note it’s supported to use an existing Issuer/ClusterIssuer for issuing the TLS certificates by setting the tls.autoGenerated.certManager.existingIssuer and tls.autoGenerated.certManager.existingIssuerKind parameters.

Initialize the database

The ScyllaDB image supports the use of custom scripts to initialize a fresh instance. This may be done by creating a Kubernetes ConfigMap that includes the necessary .sh or .cql scripts and passing this ConfigMap to the chart via the initDBConfigMap parameter.

Use a custom configuration file

This chart also supports mounting custom configuration file(s) for ScyllaDB. This is achieved by setting the existingConfiguration parameter with the name of a ConfigMap that includes the custom configuration file(s). Here is an example of deploying the chart with a custom configuration file stored in a ConfigMap named scylladb-configuration:

existingConfiguration=scylladb-configuration

NOTE: This ConfigMap will override other ScyllaDB configuration variables set in the chart.

Set pod affinity

This chart allows you to set custom pod affinity using the XXX.affinity parameter(s). Find more information about pod affinity in the Kubernetes documentation.

As an alternative, you can use the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami ScyllaDB image stores the ScyllaDB data at the /bitnami/scylladb path of the container.

Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters section to configure the PVC or to disable persistence.

If you encounter errors when working with persistent volumes, refer to our troubleshooting guide for persistent volumes.

Adjust permissions of persistent volume mountpoint

As the image run as non-root by default, it is necessary to adjust the ownership of the persistent volume so that the container can write data into it. There are two approaches to achieve this:

  • Use Kubernetes SecurityContexts by setting the podSecurityContext.enabled and containerSecurityContext.enabled to true. This option is enabled by default in the chart. However, this feature does not work in all Kubernetes distributions.
  • Use an init container to change the ownership of the volume before mounting it in the final destination. Enable this container by setting the volumePermissions.enabled parameter to true.

Parameters

Global parameters

Name Description Value
global.imageRegistry Global Docker image registry ""
global.imagePullSecrets Global Docker registry secret names as an array []
global.defaultStorageClass Global default StorageClass for Persistent Volume(s) ""
global.storageClass DEPRECATED: use global.defaultStorageClass instead ""
global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation) auto

Common parameters

Name Description Value
nameOverride String to partially override common.names.fullname ""
fullnameOverride String to fully override common.names.fullname ""
kubeVersion Force target Kubernetes version (using Helm capabilities if not set) ""
commonLabels Labels to add to all deployed objects (sub-charts are not considered) {}
commonAnnotations Annotations to add to all deployed objects {}
clusterDomain Kubernetes cluster domain name cluster.local
extraDeploy Array of extra objects to deploy with the release []
diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden) false
diagnosticMode.command Command to override all containers in the deployment ["sleep"]
diagnosticMode.args Args to override all containers in the deployment ["infinity"]

Scylladb parameters

Name Description Value
image.registry Scylladb image registry REGISTRY_NAME
image.repository Scylladb image repository REPOSITORY_NAME/scylladb
image.digest Scylladb image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag ""
image.pullPolicy image pull policy IfNotPresent
image.pullSecrets Scylladb image pull secrets []
image.debug Enable image debug mode false
dbUser.user Scylladb admin user cassandra
dbUser.forcePassword Force the user to provide a non false
dbUser.password Password for dbUser.user. Randomly generated if empty ""
dbUser.existingSecret Use an existing secret object for dbUser.user password (will ignore dbUser.password) ""
initDBConfigMap ConfigMap with cql scripts. Useful for creating a keyspace and pre-populating data ""
initDBSecret Secret with cql script (with sensitive data). Useful for creating a keyspace and pre-populating data ""
existingConfiguration ConfigMap with custom scylladb configuration files. This overrides any other Scylladb configuration set in the chart ""
cluster.name Scylladb cluster name scylladb
cluster.seedCount Number of seed nodes 1
cluster.numTokens Number of tokens for each node 256
cluster.datacenter Datacenter name dc1
cluster.rack Rack name rack1
cluster.endpointSnitch Endpoint Snitch SimpleSnitch
cluster.extraSeeds For an external/second scylladb ring. []
cluster.enableUDF Enable User defined functions false
jvm.extraOpts Set the value for Java Virtual Machine extra options ""
jvm.maxHeapSize Set Java Virtual Machine maximum heap size (MAX_HEAP_SIZE). Calculated automatically if nil ""
jvm.newHeapSize Set Java Virtual Machine new heap size (HEAP_NEWSIZE). Calculated automatically if nil ""
command Command for running the container (set to default if not set). Use array form []
args Args for running the container (set to default if not set). Use array form []
extraEnvVars Extra environment variables to be set on scylladb container []
extraEnvVarsCM Name of existing ConfigMap containing extra env vars ""
extraEnvVarsSecret Name of existing Secret containing extra env vars ""

Statefulset parameters

Name Description Value
replicaCount Number of Scylladb replicas 1
updateStrategy.type updateStrategy for Scylladb statefulset RollingUpdate
nameResolutionThreshold Failure threshold for internal hostnames resolution 5
nameResolutionTimeout Timeout seconds between probes for internal hostnames resolution 5
automountServiceAccountToken Mount Service Account token in pod false
hostAliases Add deployment host aliases []
podManagementPolicy StatefulSet pod management policy OrderedReady
priorityClassName Scylladb pods’ priority. ""
podAnnotations Additional pod annotations {}
statefulsetLabels Labels for statefulset {}
statefulsetAnnotations Annotations for statefulset {}
podLabels Additional pod labels {}
podAffinityPreset Pod affinity preset. Ignored if affinity is set. Allowed values: soft or hard ""
podAntiAffinityPreset Pod anti-affinity preset. Ignored if affinity is set. Allowed values: soft or hard soft
nodeAffinityPreset.type Node affinity preset type. Ignored if affinity is set. Allowed values: soft or hard ""
nodeAffinityPreset.key Node label key to match. Ignored if affinity is set ""
nodeAffinityPreset.values Node label values to match. Ignored if affinity is set []
affinity Affinity for pod assignment {}
nodeSelector Node labels for pod assignment {}
tolerations Tolerations for pod assignment []
topologySpreadConstraints Topology Spread Constraints for pod assignment []
podSecurityContext.enabled Enabled Scylladb pods’ Security Context true
podSecurityContext.fsGroupChangePolicy Set filesystem group change policy Always
podSecurityContext.sysctls Set kernel settings using the sysctl interface []
podSecurityContext.supplementalGroups Set filesystem extra groups []
podSecurityContext.fsGroup Set Scylladb pod’s Security Context fsGroup 1001
containerSecurityContext.enabled Enabled Scylladb containers’ Security Context true
containerSecurityContext.seLinuxOptions Set SELinux options in container {}
containerSecurityContext.runAsUser Set Scylladb containers’ Security Context runAsUser 1001
containerSecurityContext.runAsGroup Set Scylladb containers’ Security Context runAsGroup 1001
containerSecurityContext.allowPrivilegeEscalation Set Scylladb containers’ Security Context allowPrivilegeEscalation false
containerSecurityContext.capabilities.drop Set Scylladb containers’ Security Context capabilities to be dropped ["ALL"]
containerSecurityContext.readOnlyRootFilesystem Set Scylladb containers’ Security Context readOnlyRootFilesystem true
containerSecurityContext.runAsNonRoot Set Scylladb containers’ Security Context runAsNonRoot true
containerSecurityContext.privileged Set container’s Security Context privileged false
containerSecurityContext.seccompProfile.type Set container’s Security Context seccomp profile RuntimeDefault
resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production). large
resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}
livenessProbe.enabled Enable livenessProbe true
livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe 100
livenessProbe.periodSeconds Period seconds for livenessProbe 30
livenessProbe.timeoutSeconds Timeout seconds for livenessProbe 30
livenessProbe.failureThreshold Failure threshold for livenessProbe 5
livenessProbe.successThreshold Success threshold for livenessProbe 1
readinessProbe.enabled Enable readinessProbe true
readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe 60
readinessProbe.periodSeconds Period seconds for readinessProbe 10
readinessProbe.timeoutSeconds Timeout seconds for readinessProbe 30
readinessProbe.failureThreshold Failure threshold for readinessProbe 5
readinessProbe.successThreshold Success threshold for readinessProbe 1
startupProbe.enabled Enable startupProbe false
startupProbe.initialDelaySeconds Initial delay seconds for startupProbe 0
startupProbe.periodSeconds Period seconds for startupProbe 10
startupProbe.timeoutSeconds Timeout seconds for startupProbe 5
startupProbe.failureThreshold Failure threshold for startupProbe 60
startupProbe.successThreshold Success threshold for startupProbe 1
customLivenessProbe Custom livenessProbe that overrides the default one {}
customReadinessProbe Custom readinessProbe that overrides the default one {}
customStartupProbe Override default startup probe {}
lifecycleHooks Override default container hooks {}
schedulerName Alternative scheduler ""
terminationGracePeriodSeconds In seconds, time the given to the Scylladb pod needs to terminate gracefully ""
extraVolumes Optionally specify extra list of additional volumes for scylladb container []
extraVolumeMounts Optionally specify extra list of additional volumeMounts for scylladb container []
initContainers Add additional init containers to the scylladb pods []
sidecars Add additional sidecar containers to the scylladb pods []
pdb.create Enable/disable a Pod Disruption Budget creation true
pdb.minAvailable Mininimum number of pods that must still be available after the eviction ""
pdb.maxUnavailable Max number of pods that can be unavailable after the eviction ""
hostNetwork Enable HOST Network false
containerPorts.intra Intra Port on the Host and Container 7000
containerPorts.tls TLS Port on the Host and Container 7001
containerPorts.jmx JMX Port on the Host and Container 7199
containerPorts.cql CQL Port on the Host and Container 9042
containerPorts.cqlShard CQL Port (Shard) on the Host and Container 19042
containerPorts.api REST API port on the Host and Container 10000
containerPorts.metrics Metrics port on the Host and Container 9180
extraContainerPorts Optionally specify extra list of additional ports for the container []
hostPorts.intra Intra Port on the Host ""
hostPorts.tls TLS Port on the Host ""
hostPorts.jmx JMX Port on the Host ""
hostPorts.cql CQL Port on the Host ""
hostPorts.cqlShard CQL (Sharded) Port on the Host ""
hostPorts.api REST API Port on the Host ""
hostPorts.metrics Metrics Port on the Host ""

JMX Proxy Deployment Parameters

Name Description Value
jmxProxy.enabled Enable JMX Proxy sidecar true
jmxProxy.extraEnvVars Array with extra environment variables to add to JMX Proxy sidecar []
jmxProxy.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for JMX Proxy sidecar ""
jmxProxy.extraEnvVarsSecret Name of existing Secret containing extra env vars for JMX Proxy sidecar ""
jmxProxy.command Override default container command (useful when using custom images) []
jmxProxy.args Override default container args (useful when using custom images) []
jmxProxy.livenessProbe.enabled Enable livenessProbe on JMX Proxy sidecar true
jmxProxy.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe 5
jmxProxy.livenessProbe.periodSeconds Period seconds for livenessProbe 10
jmxProxy.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe 5
jmxProxy.livenessProbe.failureThreshold Failure threshold for livenessProbe 5
jmxProxy.livenessProbe.successThreshold Success threshold for livenessProbe 1
jmxProxy.readinessProbe.enabled Enable readinessProbe on JMX Proxy sidecar true
jmxProxy.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe 5
jmxProxy.readinessProbe.periodSeconds Period seconds for readinessProbe 20
jmxProxy.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe 30
jmxProxy.readinessProbe.failureThreshold Failure threshold for readinessProbe 5
jmxProxy.readinessProbe.successThreshold Success threshold for readinessProbe 1
jmxProxy.startupProbe.enabled Enable startupProbe on JMX Proxy containers false
jmxProxy.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe 5
jmxProxy.startupProbe.periodSeconds Period seconds for startupProbe 10
jmxProxy.startupProbe.timeoutSeconds Timeout seconds for startupProbe 5
jmxProxy.startupProbe.failureThreshold Failure threshold for startupProbe 5
jmxProxy.startupProbe.successThreshold Success threshold for startupProbe 1
jmxProxy.customLivenessProbe Custom livenessProbe that overrides the default one {}
jmxProxy.customReadinessProbe Custom readinessProbe that overrides the default one {}
jmxProxy.customStartupProbe Custom startupProbe that overrides the default one {}
jmxProxy.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if jmxProxy.resources is set (jmxProxy.resources is recommended for production). micro
jmxProxy.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}
jmxProxy.containerSecurityContext.enabled Enabled containers’ Security Context true
jmxProxy.containerSecurityContext.seLinuxOptions Set SELinux options in container {}
jmxProxy.containerSecurityContext.runAsUser Set containers’ Security Context runAsUser 1001
jmxProxy.containerSecurityContext.runAsGroup Set containers’ Security Context runAsGroup 1001
jmxProxy.containerSecurityContext.runAsNonRoot Set container’s Security Context runAsNonRoot true
jmxProxy.containerSecurityContext.privileged Set container’s Security Context privileged false
jmxProxy.containerSecurityContext.readOnlyRootFilesystem Set container’s Security Context readOnlyRootFilesystem true
jmxProxy.containerSecurityContext.allowPrivilegeEscalation Set container’s Security Context allowPrivilegeEscalation false
jmxProxy.containerSecurityContext.capabilities.drop List of capabilities to be dropped ["ALL"]
jmxProxy.containerSecurityContext.seccompProfile.type Set container’s Security Context seccomp profile RuntimeDefault
jmxProxy.lifecycleHooks for the JMX Proxy container(s) to automate configuration before or after startup {}
jmxProxy.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the JMX Proxy container(s) []
jmxProxy.extraContainerPorts Optionally specify extra list of additional ports for the container []

Autoscaling

Name Description Value
autoscaling.vpa.enabled Enable VPA false
autoscaling.vpa.annotations Annotations for VPA resource {}
autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory []
autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod {}
autoscaling.vpa.minAllowed VPA Min allowed resources for the pod {}

VPA update policy

Name Description Value
autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod Auto
autoscaling.hpa.annotations Annotations for HPA resource {}
autoscaling.hpa.enabled Enable HPA false
autoscaling.hpa.minReplicas Min replicas 1
autoscaling.hpa.maxReplicas Max replicas 3
autoscaling.hpa.targetCPUUtilizationPercentage Target CPU utilization percentage 75
autoscaling.hpa.targetMemoryUtilizationPercentage Target Memory utilization percentage ""
autoscaling.hpa.customRules Custom rules []
autoscaling.hpa.behavior HPA Behavior {}

RBAC parameters

Name Description Value
serviceAccount.create Enable the creation of a ServiceAccount for Scylladb pods true
serviceAccount.name The name of the ServiceAccount to use. ""
serviceAccount.annotations Annotations for Scylladb Service Account {}
serviceAccount.automountServiceAccountToken Automount API credentials for a service account. false

Traffic Exposure Parameters

Name Description Value
service.type Scylladb service type ClusterIP
service.ports.cql Scylladb service CQL Port 9042
service.ports.cqlShard Scylladb service CQL Port (sharded) 19042
service.ports.metrics Scylladb service metrics port 8080
service.nodePorts.cql Node port for CQL ""
service.nodePorts.cqlShard Node port for CQL (sharded) ""
service.nodePorts.metrics Node port for metrics ""
service.extraPorts Extra ports to expose in the service (normally used with the sidecar value) []
service.loadBalancerIP LoadBalancerIP if service type is LoadBalancer ""
service.loadBalancerSourceRanges Service Load Balancer sources []
service.clusterIP Service Cluster IP ""
service.externalTrafficPolicy Service external traffic policy Cluster
service.annotations Provide any additional annotations which may be required. {}
service.sessionAffinity Session Affinity for Kubernetes service, can be “None” or “ClientIP” None
service.sessionAffinityConfig Additional settings for the sessionAffinity {}
service.headless.annotations Annotations for the headless service. {}
service.internal.enabled Create a service per pod (this improves the cluster stability when scaling or performing upgrades) true
service.internal.labels Labels for the internal services. {}
service.internal.annotations Annotations for the internal services. {}
service.internal.extraPorts Extra ports to expose in the service (normally used with the sidecar value) []
networkPolicy.enabled Specifies whether a NetworkPolicy should be created true
networkPolicy.allowExternal Don’t require server label for connections true
networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations. true
networkPolicy.extraIngress Add extra ingress rules to the NetworkPolicy []
networkPolicy.extraEgress Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true) []
networkPolicy.ingressNSMatchLabels Labels to match to allow traffic from other namespaces {}
networkPolicy.ingressNSPodMatchLabels Pod labels to match to allow traffic from other namespaces {}

Persistence parameters

Name Description Value
persistence.enabled Enable Scylladb data persistence using PVC, use a Persistent Volume Claim, If false, use emptyDir true
persistence.existingClaim Name of an existing PVC to use ""
persistence.storageClass PVC Storage Class for Scylladb data volume ""
persistence.commitStorageClass PVC Storage Class for Scylladb Commit Log volume ""
persistence.annotations Persistent Volume Claim annotations {}
persistence.accessModes Persistent Volume Access Mode ["ReadWriteOnce"]
persistence.mountPath The path the data volume will be mounted at /bitnami/scylladb
persistence.size PVC Storage Request for Scylladb data volume 8Gi
persistence.commitLog.storageClass PVC Storage Class for Scylladb Commit Log volume ""
persistence.commitLog.annotations Persistent Volume Claim annotations {}
persistence.commitLog.accessModes Persistent Volume Access Mode ["ReadWriteOnce"]
persistence.commitLog.size PVC Storage Request for Scylladb data volume 2Gi
persistence.commitLog.mountPath The path the commit log volume will be mounted at. Unset by default. Set it to ‘/bitnami/scylladb/commitlog’ to enable a separate commit log volume ""

Volume Permissions parameters

Name Description Value
volumePermissions.enabled Enable init container that changes the owner and group of the persistent volume false
volumePermissions.image.registry Init container volume image registry REGISTRY_NAME
volumePermissions.image.repository Init container volume image repository REPOSITORY_NAME/os-shell
volumePermissions.image.digest Init container volume image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag ""
volumePermissions.image.pullPolicy Init container volume pull policy IfNotPresent
volumePermissions.image.pullSecrets Specify docker-registry secret names as an array []
volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production). nano
volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}
volumePermissions.securityContext.seLinuxOptions Set SELinux options in container {}
volumePermissions.securityContext.runAsUser User ID for the init container 0

Metrics parameters

Name Description Value
metrics.enabled Start a side-car prometheus exporter false
metrics.podAnnotations Metrics exporter pod Annotation and Labels {}
metrics.serviceMonitor.enabled If true, creates a Prometheus Operator ServiceMonitor (also requires metrics.enabled to be true) false
metrics.serviceMonitor.namespace Namespace in which Prometheus is running monitoring
metrics.serviceMonitor.interval Interval at which metrics should be scraped. ""
metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended ""
metrics.serviceMonitor.selector Prometheus instance selector labels {}
metrics.serviceMonitor.metricRelabelings Specify Metric Relabelings to add to the scrape endpoint []
metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping []
metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint false
metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus. ""
metrics.serviceMonitor.labels Used to pass Labels that are required by the installed Prometheus Operator {}

TLS/SSL parameters

Name Description Value
tls.internodeEncryption Set internode encryption none
tls.clientEncryption Set client-server encryption false
tls.existingSecret Existing secret that contains TLS certificates ""
tls.existingCASecret Existing secret that contains CA certificates ""
tls.certFilename The secret key from the existingSecret if ‘cert’ key different from the default (tls.crt) tls.crt
tls.certKeyFilename The secret key from the existingSecret if ‘key’ key different from the default (tls.key) tls.key
tls.certCAFilename The secret key from the existingSecret if ‘ca’ key different from the default (ca.crt) ""
tls.autoGenerated.enabled Enable automatic generation of certificates for TLS true
tls.autoGenerated.engine Mechanism to generate the certificates (allowed values: helm, cert-manager) helm
tls.autoGenerated.certManager.existingIssuer The name of an existing Issuer to use for generating the certificates (only for cert-manager engine) ""
tls.autoGenerated.certManager.existingIssuerKind Existing Issuer kind, defaults to Issuer (only for cert-manager engine) ""
tls.autoGenerated.certManager.keyAlgorithm Key algorithm for the certificates (only for cert-manager engine) RSA
tls.autoGenerated.certManager.keySize Key size for the certificates (only for cert-manager engine) 2048
tls.autoGenerated.certManager.duration Duration for the certificates (only for cert-manager engine) 2160h
tls.autoGenerated.certManager.renewBefore Renewal period for the certificates (only for cert-manager engine) 360h
sysctl.enabled Enable init container to modify Kernel settings false
sysctl.image.registry OS Shell + Utility image registry REGISTRY_NAME
sysctl.image.repository OS Shell + Utility image repository REPOSITORY_NAME/os-shell
sysctl.image.digest OS Shell + Utility image digest in the way sha256:aa…. Please note this parameter, if set, will override the tag ""
sysctl.image.pullPolicy OS Shell + Utility image pull policy IfNotPresent
sysctl.image.pullSecrets OS Shell + Utility image pull secrets []
sysctl.sysctls Map with sysctl settings to change. These are translated to sysctl -w = {}
sysctl.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if sysctl.resources is set (sysctl.resources is recommended for production). nano
sysctl.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads) {}

The above parameters map to the env variables defined in bitnami/scylladb. For more information please refer to the bitnami/scylladb image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
    --set dbUser.user=admin,dbUser.password=password \
    oci://REGISTRY_NAME/REPOSITORY_NAME/scylladb

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/scylladb

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami’s Helm charts in this troubleshooting guide.

Upgrading

It’s necessary to set the dbUser.password parameter when upgrading for readiness/liveness probes to work properly. When you install this chart for the first time, some notes will be displayed providing the credentials you must use. Please note down the password and run the command below to upgrade your chart:

helm upgrade my-release oci://REGISTRY_NAME/REPOSITORY_NAME/scylladb --set dbUser.password=[PASSWORD]

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

| Note: you need to substitute the placeholder [PASSWORD] with the value obtained in the installation notes.

License

Copyright © 2024 Broadcom. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

check-circle-line exclamation-circle-line close-line
Scroll to top icon