Secure exposed ingress endpoints in Tanzu Application Platform

This topic tells you how to secure exposed ingress endpoints with TLS in Tanzu Application Platform (commonly known as TAP).

Tanzu Application Platform exposes ingress endpoints so that:

Platform operators and application developers can interact with the platform
End users can interact with applications running on the platform

There are two ways of configuring ingress certificates to secure endpoints with TLS, such as https://:

Shared ingress issuer
Component-level configuration

Shared ingress issuer

Ingress communication uses TLS by default. VMware recommends using a shared ingress issuer for issuing ingress certificates on Tanzu Application Platform.

The shared ingress issuer is an on-platform representation of a certificate authority. It provides a method to set up TLS for the entire platform. The shared ingress issuer issues ingress certificates for all participating components.

Default self-signed ingress issuer

By default, Tanzu Application Platform installs and uses a self-signed CA ingress issuer for all components. The default ingress issuer is a self-signed cert-manager.io/v1/ClusterIssuer provided by the cert-manager package.

The ingress issuer is designated by the Tanzu Application Platform configuration value shared.ingress_issuer. It is tap-ingress-selfsigned by default.

Caution
The default ingress issuer is appropriate for testing and evaluation. VMware recommends that you replace the default self-signed issuer with your own issuer.

Default self-signed issuer limitations

The default ingress issuer represents a self-signed certificate authority. This is not problematic as far as security is concerned, however, it is not included in any configured trust chain. As a result, nothing trusts the default ingress issuer implicitly, not even Tanzu Application Platform components. Although the issued certificates are valid in principle, they are rejected. Even your browser, for example, rejects them. Furthermore, some interactions between components are not functional by default.

Default self-signed issuer prerequisites

To use the Tanzu Application Platform ingress issuer, your certificate authority must be representable by a cert-manager ClusterIssuer. You need one of the following:

Your own CA certificate
An ACME, Venafi, or Vault-based issuer, such as LetsEncrypt, as your CA
An external cert-manager ClusterIssuer representing your CA

Without one of these, you cannot use the ingress issuer, but you can still configure TLS for components. For more information, see Ingress certificates inventory.

Important
If cert-manager.tanzu.vmware.com is excluded from the installation then tap-ingress-selfsigned is not installed either. In this case, bring your own ingress issuer.

Trust the default self-signed issuer

You can trust the default ingress issuer by including tap-ingress-selfsigned’s certificate in the Tanzu Application Platform trusted CA certificates and your device’s certificate chain.

Caution
VMware discourages this approach. VMware recommends replacing the default ingress issuer instead.

To trust the default ingress issuer:

Obtain tap-ingress-selfsigned’s PEM-encoded certificate by running:

kubectl get secret \
 tap-ingress-selfsigned-root-ca \
 --namespace cert-manager \
 --output go-template='{{ index .data "tls.crt" | base64decode }}'

Add the certificate to custom CA certificates by appending it to shared.ca_cert_data and applying Tanzu Application Platform’s installation values.
Add the certificate to your device’s trust chain. The trust chain varies depending on your operating system and privileges.

Replace the default ingress issuer

You can replace Tanzu Application Platform’s default ingress issuer with any other cert-manager-compliant ClusterIssuer.

To replace the default ingress issuer:

Custom CA

Complete the following steps:

Obtain CA certificates and a private key.

Create a Secret and ClusterIssuer that represent your CA on the platform:

---
apiVersion: v1
kind: Secret
type: kubernetes.io/tls
metadata:
 name: my-company-ca
 namespace: cert-manager
stringData:
 tls.crt: #! your CA's PEM-encoded certificate
 tls.key: #! your CA's PEM-encoded private key

---
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
 name: my-company
spec:
 ca:
   secretName: my-company-ca

Set shared.ingress_issuer to the name of your issuer:

#! my-tap-values.yaml
#! ...
shared:
 ingress_issuer: my-company-ca
#! ...

Apply the Tanzu Application Platform installation values file. When the configuration is applied, components obtain certificates from the new issuer and serve them.

LetsEncrypt production

Complete the following steps:

Public CAs, such as LetsEncrypt, record signed certificates in publicly-available certificate logs for certificate transparency. Verify that you are okay with this before using LetsEncrypt.
Verify that the LetsEncrypt production API rate limits suit your needs.
Ensure that your shared.ingress_domain is accessible from the Internet.
Adjust .spec.acme.solvers if your setup requires that.
Replace .spec.acme.email with the email address that will receive notices for certificates from LetsEncrypt.

Caution
ACME HTTP01 challenges can fail under some conditions. For more information, see ACME challenges.

Create a ClusterIssuer for the LetsEncrypt production API:

---
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
 name: letsencrypt-production
spec:
 acme:
   email: [email protected]
   privateKeySecretRef:
     name: letsencrypt-production
   server: https://acme-v02.api.letsencrypt.org/directory
   solvers:
     - http01:
         ingress:
           class: contour

Set shared.ingress_issuer to the name of your issuer:

#! my-tap-values.yaml
#! ...
shared:
 ingress_issuer: letsencrypt-production
#! ...

Apply Tanzu Application Platform installation values. When the configuration is applied, components obtain certificates from the new issuer and serve them.

LetsEncrypt staging

Complete the following steps:

Public CAs, such as LetsEncrypt, record signed certificates in publicly-available certificate logs for certificate transparency. Verify that you are okay with this before using LetsEncrypt.
LetsEncrypt’s staging API is not a publicly-trusted CA. Add its certificate to your device’s trust chain and Tanzu Application Platform’s custom CA certificates.
Ensure that your shared.ingress_domain is accessible from the Internet.
Adjust .spec.acme.solvers if your setup requires that.
Replace .spec.acme.email with the email address that will receive notices for certificates from LetsEncrypt.

Caution
ACME HTTP01 challenges can fail under some conditions. For more information, see ACME challenges.

Create a ClusterIssuer for the LetsEncrypt staging API:

---
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
 name: letsencrypt-staging
spec:
 acme:
   email: [email protected]
   privateKeySecretRef:
     name: letsencrypt-production
   server: https://acme-staging-v02.api.letsencrypt.org/directory
   solvers:
     - http01:
         ingress:
           class: contour

Set shared.ingress_issuer to the name of your issuer:

#! my-tap-values.yaml
#! ...
shared:
 ingress_issuer: letsencrypt-staging
#! ...

Apply Tanzu Application Platform installation values. After the configuration is applied, components obtain certificates from the new issuer and serve them.

Other

Complete the following steps:

You can use any other cert-manager-supported ClusterIssuer as an ingress issuer for Tanzu Application Platform.

cert-manager supports a host of in-tree and out-of-tree issuers. For more information, see cert-manager’s documentation of issuers.

Set shared.ingress_issuer to the name of your issuer:

#! my-tap-values.yaml
#! ...
shared:
 ingress_issuer: my-company-ca
#! ...

Apply Tanzu Application Platform’s installation values. After the configuration is applied, components obtain certificates from the new issuer and serve them.

There are many ways and tools to assert that new certificates are issued and served. It is best to connect to one of the ingress endpoints and inspect the certificate it serves.

The openssl command-line utility is available on most operating systems. To retrieve the certificate from an ingress endpoint and show its text representation, run:

# replace tap.example.com with your Tanzu Application Platform installation's ingress domain
openssl s_client -showcerts -servername tap-gui.tap.example.com -connect \
tap-gui.tap.example.com:443 <<< Q | openssl x509 -text -noout

Alternatively, use a browser to navigate to the ingress endpoint and click the lock icon in the address bar to inspect the certificate.

Component-level configuration

In some situations, depending on prerequisites, the shared ingress issuer is not the right choice. You can override configuration of TLS and certificates per component. A component’s ingress and TLS configuration take precedence over the shared ingress issuer.

For a list of components with ingress and how to customize them, see Plan Ingress certificates inventory in Tanzu Application Platform.

Tanzu Application Platform has limited support for wildcard certificates. For more information, see Wildcards.

Deactivate TLS for ingress

Although VMware discourages it, you can deactivate the ingress issuer by setting shared.ingress_issuer: "".