Using an external file system (volume services)

Here are instructions to help you read and write to a mounted file system from your apps. In VMware Tanzu Application Service for VMs (TAS for VMs), a volume service provides a volume so your app can read or write to a reliable, persistent file system.

Note: If you are using VMware Tanzu Application Service for VMs [Windows], see Using SMB Volumes in .NET Apps. br>NFS is not available on Windows systems.

Prerequisite

Before you can use a volume service with your app, determine if any volume services are available for your app.

To determine if volume services are available:

1. Log in to the Cloud Foundry Command Line Interface (cf CLI). Run:

   cf login
   

2. List available NFS volume services. Run:

   cf marketplace
   

   See the following example output of the NFS volume service:

   cf marketplace
   service   plans      description
   nfs       Existing   Service for connecting to NFS volumes
   

3. Do one of the following:

   • If no NFS volume service exists: If no volume service that fits your requirements exists, contact your Ops Manager admin. For more information, see Enabling Volume Services.
   • If an NFS volume service exists: Continue to Mount an External File System.

Mount an external filesystem

The sections below describe how to mount an external filesystem to your app.

Create and bind a service instance

To use a volume service deployed by your Ops Manager admin, you must first create an instance of the specific volume service that you need.

You can also bind volume services using an app manifest. However, app manifests do not support bind configuration. If you want to bind a volume service using an app manifest, you must specify bind configuration when you create the service instance. The releases that support this are nfs-volume v1.3.1 and later and smb-volume v1.0.0 and later. For more information, see Services in Deploying with App Manifests.

To create and bind an instance for the volume service:

1. Create a service instance:

   • NFS: See Create an NFS Volume Service below.
   • SMB: See Create an SMB Volume Service below.

2. Bind your service instance to an app:

   • NFS-only: Bind an NFS service instance to an app. Run:

     cf bind-service YOUR-APP SERVICE-NAME -c '{"uid":"UID","gid":"GID","mount":"OPTIONAL-MOUNT-PATH","readonly":true}'
     

     Where:

     • YOUR-APP is the name of the app for which you want to use the volume service.
     • SERVICE-NAME is the name of the volume service instance you created in the previous step.
     • (Optional) UID and GID are the UID and GID to use when mounting the share to the app. The GID and UID must be positive integer values. Provide the UID and GID as a JSON string in-line or in a file. If you omit uid and gid, the driver skips mapfs mounting and performs just the normal kernel mount of the NFS file system without the overhead associated with FUSE mounts.

       ImportantFor security reasons, nfs-volume v2.0.0 and later does not support UID and GID values of 0.

       The user specified by uid must have access to the files on the share. When uid and gid are omitted, the app file operations use the UID of the running app process. For buildpack apps, this UID is always 2000. For Docker apps, the effective UID is the same as the UID of the process inside the Docker container, except for root, which is mapped to 4294967294 outside the Docker container.
     • (Optional) OPTIONAL-MOUNT-PATH is a JSON string that indicates the volume should be mounted to a particular path within your app rather than the default path. Choose a path with a root-level folder that already exists in the container, such as /home, /usr, or /var.

       ImportantDo not specify a MOUNT-PATH within the /app directory, which is where TAS for VMs unpacks the droplet. For more information, see Mount a Shared Volume in the /app Directory.

     • (Optional) "readonly":true is an optional JSON string that creates a read-only mount. By default, Volume Services mounts a read-write file system. For read-only mounts, the driver enables attribute caching. This results in fewer attribute RPCs and better performance.

     The following example shows binding my-app to the nfs_service_instance and specifying a read-only volume to be mounted to /var/volume1, passing an in-line JSON string:

     cf bind-service my-app nfs_service_instance -c '{"uid":"1000","gid":"1000","mount":"/var/volume1","readonly":true}'
     

   • LDAP-only: Bind an LDAP service to an app. Run:

     cf bind-service YOUR-APP SERVICE-NAME -c '{"username":"USERNAME","password":"PASSWORD","mount":"OPTIONAL-MOUNT-PATH","readonly":true}'
     

     Where:

     • YOUR-APP is the name of the app for which you want to use the volume service.
     • SERVICE-NAME is the name of the volume service instance you created in the previous step.
     • USERNAME and PASSWORD are the username and password for the LDAP server. If you omit username and password, the driver skips mapfs mounting and performs just the normal kernel mount of the NFS file system without the overhead associated with FUSE mounts.
     • (Optional) OPTIONAL-MOUNT-PATH is a JSON string that indicates the volume should be mounted to a particular path within your app rather than the default path. Choose a path with a root-level folder that already exists in the container, such as /home, /usr, or /var.

       ImportantDo not specify a MOUNT-PATH within the /app directory, which is where TAS for VMs unpacks the droplet. For more information, see Mount a Shared Volume in the /app Directory.

     • (Optional) "readonly":true is an optional JSON string that creates a read-only mount. By default, Volume Services mounts a read-write file system. For read-only mounts, the driver enables attribute caching. This results in fewer attribute RPCs and better performance.

3. Restage your app. Run:

   cf restage YOUR-APP
   

   Where YOUR-APP is the name of the app.

Access the volume service from your app

To access the volume service from your app, you must know which file path to use in your code.

You can view the file path in the details of the service binding, which are available from the VCAP_SERVICES environment variable. See VCAP_SERVICES.

To access the volume service from your app:

1. View environment variables for your app. Run:

   cf env YOUR-APP
   

   Where YOUR-APP is the name of your app.
   
   The following is example output of the cf env command:

   $ cf env YOUR-APP
   "VCAP_SERVICES": {
     "nfs": [
       {
         "credentials": {},
         "label": "nfs",
         "name": "nfs_service_instance",
         "plan": "Existing",
         "provider": null,
         "syslog_drain_url": null,
         "tags": [
           "nfs"
         ],
         "volume_mounts": [
           {
             "container_dir": "/var/vcap/data/153e3c4b-1151-4cf7-b311-948dd77fce64",
             "device_type": "shared",
             "mode": "rw"
           }
         ]
       }
     ]
   }
   

2. Use the properties under volume_mounts for any information your app needs. See the following table:

   Property	Description
   container_dir	String containing the path to the mounted volume that you bound to your app.
   device_type	The NFS volume release. This currently only supports shared devices. A shared device represents a distributed file system that can mount on all app instances simultaneously.
   mode	String that informs what type of access your app has to NFS, either read-only, ro, or read and write, rw.

Mount a shared volume in the /app directory

If you specify a mount inside the /app directory, the app may fail to start and parts of the app droplet may be written to the remote file share. This is because TAS for VMs mounts the volume before moving your compiled app into the droplet.

If your app requires the shared volume to be placed within the /app directory, you can use a symbolic link at app startup.

To mount a volume in the /app directory:

1. Specify a mount volume in a location outside of the /app directory.

2. Create a symbolic link at app startup time, prior to launching the app. For example, run:

   cf push YOUR-APP -c "ln -s /var/volume1 /app/volume1 && \$HOME/boot.sh"
   

   Where YOUR-APP is the name of the app.

Create and use NFS volume services

This section describes how to use the NFS volume service. Note that NFS is not available on Windows systems.

TAS for VMs offers two NFS volume services:

• nfs: This volume service provides support for NFS volumes using both v3 and v4.x protocols.

• nfs-legacy (deprecated): Although it is deprecated, this volume service is still available due to the difficulty of retiring services. If you use this service, it performs exactly the same mount as the nfs service. For information about migrating to nfs, see Migrate nfs-legacy Services to nfs.

Both services offer a single plan called Existing.

Important NFS is not available on Windows systems.

Create an NFS volume service

To create an NFS volume service using the Existing plan of the nfs service:

1. Create an NFS volume service. Run:

   cf create-service nfs Existing SERVICE-INSTANCE-NAME -c '{"share":"SERVER/SHARE", "version":"NFS-PROTOCOL"}'
   

   Where:

   • SERVICE-INSTANCE-NAME is a name you provide for this NFS volume service instance.
   • SERVER/SHARE is the NFS address of your server and share. Ensure that you omit the : that usually follows the server name in the address.
   • (Optional) NFS-PROTOCOL is the NFS protocol you want to use. For example, if you want to use NFSv4, set the version to 4.1. Valid values are 3.0, 4.0, 4.1 or 4.2. If you do not specify a version, the protocol version used is negotiated between client and server at mount time. This usually results in the latest available version being used.

2. Confirm that the NFS volume service appears in your list of services. Run:

   cf services
   

Migrate nfs-legacy services to nfs

With the release of NFS Volume Service v1.5.4, the original fuse-based NFS service is deprecated in favor of the newer kernel mount-based NFS service. Existing NFS volume service bindings are listed as nfs-legacy.

To migrate from nfs-legacy to the newer nfs service, VMware recommends that you re-create and re-bind your nfs service instances.

With the release of NFS Volume Service v2.0.0, the nfs-legacy service uses the nfs service. To avoid being affected when the nfs-legacy service is retired, re-create and re-bind your service instances using the nfs service.

Deploy and bind a sample app

This section describes how to deploy a sample app and bind it to the NFS volume service.

To deploy and bind a sample app:

1. Clone the GitHub repository for the sample app into your workspace by running these commands:

   cd ~/workspace
   

   git clone https://github.com/cloudfoundry/persi-acceptance-tests.git
   

2. Change into the persi-acceptance-tests/assets/pora/ directory:

   cd ~/workspace/persi-acceptance-tests/assets/pora
   

3. Push the pora test app by running:

   cf push pora --no-start
   

4. Bind the service to your app. Run:

   cf bind-service pora SERVICE-INSTANCE-NAME -c '{"uid":"UID","gid":"GID"}'
   

   Where:

   • SERVICE-INSTANCE-NAME: The name of the volume service instance you created previously.
   • UID and GID: The UID and GID to use when mounting the share to the app. The NFS driver uses these values in the following ways:
     • When sending traffic to the NFS server, the NFS driver translates the app user ID and group ID to the UID and GID values.
     • When returning attributes from the NFS server, the NFS driver translates the UID and GID back to the running user UID and default GID. This allows you to interact with your NFS server as a specific user while allowing TAS for VMs to run your app as an arbitrary user. UID and GID must be positive integer values.

       ImportantIn NFS v2.0.0 and later, uid and gid values of 0 are no longer permissible due to security reasons.

   • (Optional) mount: Use this option to specify the path at which volumes mount to the app container. The default is an arbitrarily-named folder in /var/vcap/data. You may need to modify this value if your app has specific requirements. For example:

     cf bind-service pora myVolume -c '{"mount":"/var/path"}'

   • (Optional) readonly: When you run the cf bind-service command, Volume Services mounts a read-write file system by default. You can specify a read-only mount by adding "readonly":true to the bind configuration JSON string.
   • (Optional) cache: When you run the cf bind-service command, Volume Services mounts the remote file system with attribute caching disabled by default. You can enable attribute caching using default values by adding "cache":true to the bind configuration JSON string.

5. Start the app. Run:

   cf start pora
   

6. Confirm the app is running. Run:

   curl http://pora.YOUR-CF-DOMAIN.com
   

   The command returns an instance index for your app.

7. Confirm the app can access the shared volume. Run:

   curl http://pora.YOUR-CF-DOMAIN.com/write
   

   The command writes a file to the share and then reads it back out again.

Use NFS volume services

This section describes using the NFS Volume Service.

Configure LDAP credentials with service instance creation

If your Ops Manager deployment has LDAP enabled, you can configure LDAP credentials for your NFS Volume Service instance.

To configure LDAP credentials while creating your NFS Volume Service instance:

1. Specify values for username and password in the JSON string for your cf create-service command:

   cf create-service nfs PLAN SERVICE-INSTANCE-NAME -c '{"share":"SERVER/SHARE", "username":"USERNAME", "password":"PASSWORD"}'
   

   Where:

   • PLAN is the name of the service plan.
   • SERVICE-INSTANCE-NAME is a name you provide for this NFS Volume Service instance.
   • SERVER/SHARE is the NFS address of your server and share.
   • USERNAME is a username you provide for this NFS Volume Service instance.
   • PASSWORD is a password you provide for this NFS Volume Service instance.

Specify bind parameters during service instance creation

As of nfs-volume-release v1.3.1, you can specify bind parameters in advance, when you create a service instance. Use this option if you bind the service to your app in an app manifest, where bind configuration is not supported.

File locking with flock() and lockf()/fcntl()

Apps that use file locking through unix system calls such as flock() and fcntl() or script commands such as flock may use the nfs service. The nfs-legacy service uses a fuse mounting process that does not enforce locks across Diego Cells.

Hard links in the NFS service

The mapfs UID mapping layer used by the NFS service does not support hard link operations. You get a Function not implemented error if you try to create a hard link in an NFS share when uid or username has been specified for the service.

Workarounds for this issue:

• Use symbolic links, ln -s, instead of hard links.
• Omit the uid and gid or the username and password parameters to mount the share without UID mapping. For this workaround, the app user must have access to the files on the share.

Create and use SMB volume services

This section describes how to use a Server Message Block (SMB) volume service. For more information about SMB volume services, see Microsoft SMB Protocol and CIFS Protocol Overview in the Microsoft documentation.

Note: If you are using VMware Tanzu Application Service for VMs [Windows], see Using SMB Volumes in .NET Apps.

Create an SMB solume service

TAS for VMs offers an smb volume service. This volume service provides support for existing SMB shares.

The service offers a single plan called Existing.

To create an SMB volume service:

1. Create the service by running:

   cf create-service smb Existing SERVICE-INSTANCE-NAME -c '{"share":"//SERVER/SHARE", "version":"SMB-VERSION"}'
   

   Where:

   • SERVICE-INSTANCE-NAME is a name you provide for this SMB volume service instance.
   • //SERVER/SHARE is the SMB address of your server and share.
   • (Optional) SMB-VERSION is the SMB protocol version you want to use. For example, to use SMB 2.1, set the version to 2.1. Valid values are 1.0, 2.0, 2.1, or 3.0. If you do not specify a version, the client and server negotiate a protocol version at mount time. The client and server usually select the latest available version.

2. Confirm that the SMB volume service appears in your list of services. Run:

   cf services
   

Deploy and bind a sample app

This section describes how to deploy a sample app and bind it to the SMB volume service.

To deploy and bind a sample app:

1. Clone the GitHub repository for the sample app into your workspace. Run:

   cd ~/workspace
   

   git clone https://github.com/cloudfoundry/persi-acceptance-tests.git
   

2. Change into the persi-acceptance-tests/assets/pora/ directory:

   cd ~/workspace/persi-acceptance-tests/assets/pora
   

3. Push the pora test app. Run:

   cf push pora --no-start
   

4. Bind the service to your app. Run:

   cf bind-service pora SERVICE-INSTANCE-NAME -c '{"username":"USERNAME","password":"PASSWORD"}'
   

   Where:

   • SERVICE-INSTANCE-NAME: The name of the volume service instance you created previously.

   • USERNAME and PASSWORD: The username and password to use when mounting the share to the app. This allows you to interact with your SMB server as a specific user while allowing TAS for VMs to run your app as an arbitrary user.

   • (Optional) mount: Use this option to specify the path at which volumes mount to the app container. The default is an arbitrarily-named folder in /var/vcap/data. You may need to modify this value if your app has specific requirements. For example, run:

     cf bind-service pora myVolume -c '{"username":"some-user","password":"some-password","mount":"/var/path"}'

   • (Optional) readonly: When you run the cf bind-service command, Volume Services mounts a read-write file system by default. You can specify a read-only mount by adding "readonly":true to the bind configuration JSON string.

   • (Optional) domain: If you use a Windows domain, you can specify a domain parameter.

5. Start the app. Run:

   cf start pora
   

6. Confirm the app is running. Run:

   curl http://pora.YOUR-CF-DOMAIN.com
   

   The command returns an instance index for your app.

7. Confirm the app can access the shared volume. Run:

   curl http://pora.YOUR-CF-DOMAIN.com/write
   

   The command writes a file to the share and then reads it back out again.