Serves data files to or writes data files out from Greenplum Database segments.
gpfdist [-d <directory>] [-p <http_port>] [-P <last_http_port>] [-l <log_file>] [-t <timeout>] [-S] [-w <time>] [-v | -V] [-s] [-m <max_length>] [--ssl <certificate_path> [--sslclean <wait_time>] ] [-c <config.yml>] gpfdist -? | --help gpfdist --version
gpfdist is Greenplum Database parallel file distribution program. It is used by readable external tables and
gpload to serve external table files to all Greenplum Database segments in parallel. It is used by writable external tables to accept output streams from Greenplum Database segments in parallel and write them out to a file.
gpload are compatible only with the Greenplum Database major version in which they are shipped. For example, a
gpfdist utility that is installed with Greenplum Database 4.x cannot be used with Greenplum Database 5.x or 6.x.
In order for
gpfdist to be used by an external table, the
LOCATION clause of the external table definition must specify the external table data using the
gpfdist:// protocol (see the Greenplum Database command
CREATE EXTERNAL TABLE).
Note: If the
--ssl option is specified to enable SSL security, create the external table with the
The benefit of using
gpfdist is that you are guaranteed maximum parallelism while reading from or writing to external tables, thereby offering the best performance as well as easier administration of external tables.
For readable external tables,
gpfdist parses and serves data files evenly to all the segment instances in the Greenplum Database system when users
SELECT from the external table. For writable external tables,
gpfdist accepts parallel output streams from the segments when users
INSERT into the external table, and writes to an output file.
gpfdist reads data and encounters a data formatting error, the error message includes a row number indicating the location of the formatting error.
gpfdist attempts to capture the row that contains the error. However,
gpfdist might not capture the exact row for some formatting errors.
For readable external tables, if load files are compressed using
bzip2 (have a
.bz2 file extension),
gpfdist uncompresses the data while loading the data (on the fly). For writable external tables,
gpfdist compresses the data using
gzip if the target file has a
Note: Compression is not supported for readable and writeable external tables when the
gpfdist utility runs on Windows platforms.
When reading or writing data with the
gpfdists protocol, Greenplum Database includes
X-GP-PROTO in the HTTP request header to indicate that the request is from Greenplum Database. The utility rejects HTTP requests that do not include
X-GP-PROTO in the request header.
Most likely, you will want to run
gpfdist on your ETL machines rather than the hosts where Greenplum Database is installed. To install
gpfdist on another host, simply copy the utility over to that host and add
gpfdist to your
Note: When using IPv6, always enclose the numeric IP address in brackets.
gpfdistwill serve files for readable external tables or create output files for writable external tables. If not specified, defaults to the current directory.
gpfdistwill serve files. Defaults to 8080.
gpfdistwill attempt to serve files.
gpfdistserves the files on the first port number in the range to which it successfully binds.
gpfdistprocess. Default is 5 seconds. Allowed values are 2 to 7200 seconds (2 hours). May need to be increased on systems with a lot of network traffic.
Sets the maximum allowed data row length in bytes. Default is 32768. Should be used when user data includes very wide rows (or when
line too long error message occurs). Should not be used otherwise as it increases resource allocation. Valid range is 32K to 256MB. (The upper limit is 1MB on Windows systems.)
gpfdistconcurrent connections. For example, setting this value to the maximum of 256MB with 96 concurrent
gpfdistprocesses requires approximately 24GB of memory (
(96 + 1) x 246MB).
Enables simplified logging. When this option is specified, only messages with
WARN level and higher are written to the
gpfdist log file.
INFO level messages are not written to the log file. If this option is not specified, all
gpfdist messages are written to the log file.
O_SYNCflag. Any writes to the resulting file descriptor block
gpfdistuntil the data is physically written to the underlying hardware.
Sets the number of seconds that Greenplum Database delays before closing a target file such as a named pipe. The default value is 0, no delay. The maximum value is 7200 seconds (2 hours).
Adds SSL encryption to data transferred with
gpfdist. After executing
gpfdist with the
--ssl certificate\_path option, the only way to load data from this file server is with the
gpfdist:// protocol. For information on the
gpfdist:// protocol, see "Loading and Unloading Data" in the Greenplum Database Administrator Guide.
The location specified in certificate_path must contain the following files:
The root directory (
/) cannot be specified as certificate_path.
When the utility is run with the
--ssl option, sets the number of seconds that the utility delays before closing an SSL session and cleaning up the SSL resources after it completes writing data to or from a Greenplum Database segment. The default value is 0, no delay. The maximum value is 500 seconds. If the delay is increased, the transfer speed decreases.
gpfdist server closed connection. To avoid the error, you can add a delay, for example
Specifies rules that
gpfdist uses to select a transform to apply when loading or extracting data. The
gpfdist configuration file is a YAML 1.1 document.
For information about the file format, see Configuration File Format in the Greenplum Database Administrator Guide. For information about configuring data transformation with
gpfdist, see Transforming External Data with gpfdist and gpload in the Greenplum Database Administrator Guide.
The server configuration parameter verify_gpfdists_cert controls whether SSL certificate authentication is enabled when Greenplum Database communicates with the
gpfdist utility to either read data from or write data to an external data source. You can set the parameter value to
false to disable authentication when testing the communication between the Greenplum Database external table and the
gpfdist utility that is serving the external data. If the value is
false, these SSL exceptions are ignored:
gpfdistis not trusted by Greenplum Database.
Warning: Disabling SSL certificate authentication exposes a security risk by not validating the
gpfdists SSL certificate.
gpfdist utility hangs with no read or write activity occurring, you can generate a core dump the next time a hang occurs to help debug the issue. Set the environment variable
GPFDIST_WATCHDOG_TIMER to the number of seconds of no activity to wait before
gpfdist is forced to exit. When the environment variable is set and
gpfdist hangs, the utility aborts after the specified number of seconds, creates a core dump, and sends abort information to the log file.
This example sets the environment variable on a Linux system so that
gpfdist exits after 300 seconds (5 minutes) of no activity.
To serve files from a specified directory using port 8081 (and start
gpfdist in the background):
gpfdist -d /var/load_files -p 8081 &
gpfdist in the background and redirect output and errors to a log file:
gpfdist -d /var/load_files -p 8081 -l /home/gpadmin/log &
gpfdist when it is running in the background:
--First find its process id:
ps ax | grep gpfdist
--Then kill the process, for example: