This topic describes how to define network profiles for VMware Tanzu Kubernetes Grid Integrated Edition (TKGI) provisioned Kubernetes clusters on vSphere with NSX.

Edge Router Selection

Using Tanzu Kubernetes Grid Integrated Edition on vSphere with NSX-T, you can deploy Kubernetes clusters on dedicated Tier-0 routers, creating a multi-tenant environment for each Kubernetes cluster. As shown in the diagram below, with this configuration a shared Tier-0 router hosts the TKGI control plane and connects to each customer Tier-0 router using BGP. To support multi-tenancy, configure firewall rules and security settings in NSX Manager.

Cluster Isolation Using Multiple T0 Routers

To deploy Kubernetes clusters on tenancy-based Tier-0 router(s), follow the steps below:

  1. For each Kubernetes tenant, create a dedicated Tier-0 router, and configure static routes, BGP, NAT and Edge Firewall security rules as required by each tenant. For instructions, see Configuring Multiple Tier-0 Routers for Tenant Isolation.
  2. Define a network profile per tenant that references the Tier-0 router UUID provisioned for that tenant. For example, the following network profiles define two tenant Tier-0 routers with a NATed topology.

    np_customer_A-NAT.json
    {
      "description": "network profile for Customer A",
      "name": "network-profile-Customer-A",
      "parameters": {
        "lb_size": "medium",
        "t0_router_id": "82e766f7-67f1-45b2-8023-30e2725600ba",
        "fip_pool_ids": ["8ec655f-009a-79b7-ac22-40d37598c0ff"],
        "pod_ip_block_ids": ["fce766f7-aaf1-49b2-d023-90e272e600ba"]
      }
    }
    
    np_customer_B-NAT.json
    {
      "description": "network profile for Customer B",
      "name": "network-profile-Customer-B",
      "parameters": {
        "lb_size": "small",
        "t0_router_id": "a4e766cc-87ff-15bd-9052-a0e2425612b7",
        "fip_pool_ids": ["4ec625f-b09b-29b4-dc24-10d37598c0d1"],
        "pod_ip_block_ids": ["91e7a3a1-c5f1-4912-d023-90e272260090"]
      }
    }
    

    The following network profiles define two customer Tier-0 routers for a no-NAT topology:

    np_customer_A.json
    {
      "description": "network profile for Customer A",
      "name": "network-profile-Customer-A",
      "parameters": {
        "lb_size": "medium",
        "t0_router_id": "82e766f7-67f1-45b2-8023-30e2725600ba",
        "fip_pool_ids": [
        	"8ec655f-009a-79b7-ac22-40d37598c0ff",
        	"7ec625f-b09b-29b4-dc24-10d37598c0e0"
        ],
        "pod_routable": "true",
        "pod_ip_block_ids": [
        	"fce766f7-aaf1-49b2-d023-90e272e600ba",
        	"6faf46fd-ccce-4332-92d2-d918adcccce0"
        ]
      }
    }
    
    np_customer_B.json
    {
      "description": "network profile for Customer B",
      "name": "network-profile-Customer-B",
      "parameters": {
        "lb_size": "small",
        "t0_router_id": "a4e766cc-87ff-15bd-9052-a0e2425612b7",
        "fip_pool_ids": [
        	"4ec625f-b09b-29b4-dc24-10d37598c0d1",
        	"6ec625f-b09b-29b4-dc24-10d37598dDd1"
        ],
        "pod_routable": "true",
        "pod_ip_block_ids": [
        	"91e7a3a1-c5f1-4912-d023-90e272260090",
        	"6faf46fd-ccce-4332-92d2-d918adcccce0"
        ]
      }
    }
    

    Note: The pod_routable parameter controls the routing behavior of a tenant Tier-0 router. If the parameter is set to true, the custom Pods IP Block subnet is routable and NAT is not used. If pod_routable is not present or is set to false, the custom Pods IP Block is not routable and the tenant Tier-0 is deployed in NAT mode.

check-circle-line exclamation-circle-line close-line
Scroll to top icon