Creating and Managing Compute Profiles with the CLI (vSphere)

This topic describes how to create and manage compute profiles using the VMware Tanzu Kubernetes Grid Integrated Edition (TKGI) Command Line Interface (TKGI CLI).

Overview

A compute profile enables TKGI cluster managers to configure TKGI-provisioned Kubernetes clusters with custom settings:

TKGI cluster administrators can create compute profiles with custom cluster resource parameters and settings. Cluster administrators must have pks.clusters.admin accounts.
TKGI cluster managers can configure new and existing clusters with a compute profile to override the cluster configuration settings defined by a plan. Cluster managers must have pks.cluster.manage accounts.

TKGI supports creating and managing compute profiles for Linux- and Windows-based Kubernetes clusters on vSphere with NSX-T networking and for Linux-based Kubernetes clusters on vSphere without NSX-T networking.

For general information about compute profile usage, see About Compute Profiles below.

For information about creating compute profiles, see Create a Compute Profile below.

For information on how cluster managers use compute profiles, see Using Compute Profiles (vSphere).

About Compute Profiles

TKGI-provisioned Kubernetes cluster administrators can use compute profiles to customize the following:

Compute resources such as CPU, memory, ephemeral disk, and persistent disk for Kubernetes control plane and worker nodes
vSphere resources for Kubernetes control plane and worker nodes

Note: A compute profile overrides only those CPU, memory, disk, and AZ settings that you define in the profile. If you do not define a setting in the profile, its configuration is inherited from the plan.

After you create a compute profile, cluster managers, pks.clusters.manage, can apply it to one or more Kubernetes clusters.

For more information, see Compute Profiles vs. Plans below.

Create a Compute Profile

To create a compute profile in TKGI, a cluster administrator must:

Define a compute profile in a JSON configuration file. See Compute Profile Format and Compute Profile Parameters below.
Use the TKGI CLI to define the compute profile within TKGI. See The create-compute-profile Command below.

Compute Profile Format

To create a compute profile, a cluster administrator first defines it as a JSON file. Every profile must include the name, description, and parameters properties. Then, depending on what compute resources you want to customize, define azs, control_plane, or node_pools. For example, you can define the following:

Both control_plane and node_pools, with or without azs
control_plane or node_pools, with or without azs

See the table below for examples of compute profiles.

Example	Description
Custom Nodes	Define custom compute resources for Kubernetes control plane and worker nodes.
Worker Node Pools	Define multiple pools of worker nodes.
Custom AZs (vSphere with NSX-T Only)	Define AZs for Kubernetes control plane nodes and worker node pools dynamically.

For information about all of the parameters that you can specify in a compute profile, see Compute Profile Parameters below.

Custom Nodes

Cluster administrators can define custom compute resources for control plane nodes and/or worker nodes in a compute profile instead of updating plans. Then, cluster managers can apply the profile to an existing cluster to update the cluster with the new compute resources. As a result, the overall impact to the TKGI control plane and other clusters is smaller.

The example below defines compute resources for control plane nodes and one node pool for workers:

{
  "name": "custom-nodes-compute-profile",
  "description": "custom-nodes-compute-profile",
  "parameters": {
    "cluster_customization": {
      "control_plane": {
        "cpu": 2,
        "memory_in_mb": 4096,
        "ephemeral_disk_in_mb": 16384,
        "persistent_disk_in_mb": 16384,
        "instances": 3
      },
      "node_pools": [{
        "cpu": 2,
        "memory_in_mb": 4096,
        "ephemeral_disk_in_mb": 16384,
        "persistent_disk_in_mb": 16384,
        "name": "tiny-1",
        "instances": 5,
        "max_worker_instances": 10,
        "description": ""
      }]
    }
  }
}

Worker Node Pools

Cluster administrators can define pools of worker nodes with different compute resources. Cluster managers then apply the compute profile to one or more clusters. This enables cluster managers to schedule workloads with different compute requirements on a single cluster.

Warning: If cluster update fails while applying a new compute profile with revised node pool names, do not reapply the previous compute profile: the cluster’s worker nodes will be deleted. If you encounter this scenario, fix the new compute profile configuration without modifying the node pool names, and retry your cluster update. For more information, see tkgi update-cluster compute profile failure in the VMware Tanzu Knowledge Base.

The example below defines compute resources for control plane nodes and two worker node pools. The control_plane block in this example is optional.

{
  "name": "custom-node-pools-compute-profile",
  "description": "custom-node-pools-compute-profile",
  "parameters": {
    "cluster_customization": {
      "control_plane": {
        "cpu": 2,
        "memory_in_mb": 4096,
        "ephemeral_disk_in_mb": 16384,
        "instances": 3
      },
      "node_pools": [{
          "cpu": 2,
          "memory_in_mb": 4096,
          "ephemeral_disk_in_mb": 16384,
          "persistent_disk_in_mb": 16384,
          "name": "tiny-1",
          "instances": 5,
          "node_labels": "k1=v1,k2=v2",
          "node_taints": "k3=v3:PreferNoSchedule, k4=v4:PreferNoSchedule",
          "description": ""
        },
        {
          "cpu": 4,
          "memory_in_mb": 4096,
          "ephemeral_disk_in_mb": 32768,
          "name": "medium-2",
          "instances": 1,
          "max_worker_instances": 5,
          "node_labels": "k1=v3,k2=v4",
          "node_taints": "k3=v3:NoSchedule, k4=v4:NoSchedule",
          "description": ""
        }
      ]
    }
  }
}

Custom AZs (vSphere with NSX-T Only)

Cluster administrators can define AZs in a compute profile instead of adding new AZs in the BOSH Director tile. Cluster managers then use it to specify AZs for a cluster dynamically. As a result, you do not need to make AZ changes to each TKGI plan and the overall impact to the TKGI control plane is smaller.

Note: You cannot use compute profiles to change the AZs of any nodes in an existing cluster. TKGI does not support changing the AZs of existing control plane nodes, but you can change the AZs of worker nodes by modifying their cluster’s plan.

The example below defines three AZs, cp-hg-az-1, cp-hg-az-2, and cp-hg-az-3, in the azs block, which are then referenced in the cluster_customization block.

{
  "name": "azs-custom-compute-profile",
  "description": "Profile for customized AZs",
  "parameters": {
    "azs": [{
        "name": "cp-hg-az-1",
        "cpi": "ff8d93840299bd7474f5",
        "cloud_properties": {
          "datacenters": [{
            "name": "vSAN_Datacenter",
            "clusters": [{
              "vSAN_Cluster": {
                "host_group": {
                  "drs_rule": "MUST",
                  "name": "CP-HG-AZ-1"
                }
              }
            }]
          }]
        }
      },
      {
        "name": "cp-hg-az-2",
        "cpi": "ff8d93840299bd7474f5",
        "cloud_properties": {
          "datacenters": [{
            "name": "vSAN_Datacenter",
            "clusters": [{
              "vSAN_Cluster": {
                "host_group": {
                  "drs_rule": "MUST",
                  "name": "CP-HG-AZ-2"
                }
              }
            }]
          }]
        }
      },
      {
        "name": "cp-hg-az-3",
        "cpi": "ff8d93840299bd7474f5",
        "cloud_properties": {
          "datacenters": [{
            "name": "vSAN_Datacenter",
            "clusters": [{
              "vSAN_Cluster": {
                "host_group": {
                  "drs_rule": "MUST",
                  "name": "CP-HG-AZ-3"
                }
              }
            }]
          }]
        }
      }
    ],
    "cluster_customization": {
      "control_plane": {
        "cpu": 4,
        "memory_in_mb": 16384,
        "ephemeral_disk_in_mb": 32768,
        "az_names": ["cp-hg-az-1", "cp-hg-az-2", "cp-hg-az-3"],
        "instances": 3
      },
      "node_pools": [{
        "name": "x-large",
        "cpu": 4,
        "memory_in_mb": 8192,
        "ephemeral_disk_in_mb": 32768,
        "az_names": ["cp-hg-az-1", "cp-hg-az-2", "cp-hg-az-3"],
        "instances": 3,
        "max_worker_instances": 25,
        "node_labels": "k1=v1,k2=v2",
        "node_taints": "k3=v3:NoSchedule, k4=v4:NoSchedule",
        "description": ""
      }]
    }
  }
}

Compute Profile Parameters

The compute profile JSON configuration file includes the following top-level properties:

Property	Type	Description
`name`	String	(Required) Name of the compute profile. You use this name when managing the compute profile or assigning the profile to a Kubernetes cluster through the TKGI CLI.
`description`	String	(Required) Description of the compute profile.
`parameters`	Object	(Required) Properties defining the main body of the compute profile such as `azs` and `cluster_customization`.
`azs`	Array	(Optional) Properties defining one or more AZs, including the `name`, `cpi`, and `cloud_properties` settings. See azs Block below.
`cluster_customization`	Object	(Optional) Properties defining the `control_plane` and `node_pools` settings. See `control_plane Block` and `node_pools Block` below.

`azs` Block (vSphere with NSX-T Only)

This optional block defines where Kubernetes control plane and worker nodes are created within your vSphere infrastructure. You can define one or more AZs.

If you define the azs block, do not specify the persistent_disk_in_mb property in cluster_customization. You can specify either azs or persistent_disk_in_mb, but not both.

Specify the properties below for each AZ. For more information about the cloud_properties schema, see AZs in the BOSH documentation.

Property	Type	Description
`name`	String	Name for the AZ where you want to deploy Kubernetes cluster VMs. For example, `cp-hg-az-1`.
`cpi`	String	BOSH CPI ID of your TKGI deployment. For example, `abc012abc345abc567de`. For instructions on how to obtain the ID, see Retrieve the BOSH CPI ID.
`cloud_properties`	Object	Properties defining vSphere `datacenters` for your Kubernetes cluster VMs.
`datacenters`	Array	Array of data centers. Define only one data center.
`name`	String	Name of your vSphere data center as it appears in Ops Manager and your cloud provider console. For example, `vSAN_Datacenter`.
`clusters`	Array	Array of clusters. Define only one cluster.
`CLUSTER-NAME`	String	Name of your vSphere compute cluster. For example, `vSAN_Cluster`. This section defines `host_group`.
`host_group`	Object	Properties of the host group that you want to use for your Kubernetes cluster VMs. This includes `name` and `drs_rule.`
`name`	String	Name of the host group in vSphere.
`drs_rule`	String	Specify `MUST`. If you use vSAN Stretched Clusters, specify `SHOULD`.

Retrieve the BOSH CPI ID

Use the following procedure to retrieve the BOSH CPI ID for your TKGI deployment.

Locate the credentials that were used to import the Ops Manager .ova or .ovf file into your virtualization system. You configured these credentials when you installed Ops Manager.
Note: If you lose your credentials, you must shut down the Ops Manager VM in the vSphere UI and reset the password. See vCenter Password Requirements and Lockout Behavior in the vSphere documentation for more information.
From a command line, run the following command to SSH into the Ops Manager VM:
```
ssh ubuntu@OPS-MANAGER-FQDN
```
Where OPS-MANAGER-FQDN is the fully qualified domain name (FQDN) of Ops Manager.
When prompted, enter the password that you configured during the .ova deployment into vCenter.

For example:
```
$ ssh [email protected]  
Password: ***********  
```
Run bosh cpi-config to locate the Cloud Provider Interface (CPI) name for your deployment.

For example:
```
$ bosh cpi-config  
Using environment 'BOSH-DIRECTOR-IP' as client 'ops_manager'  
cpis:  
- migrated_from:  
  - name: ""  
  name: YOUR-CPI-NAME  
```
For more information about running BOSH commands in your Tanzu Kubernetes Grid Integrated Edition deployment, see Using BOSH Diagnostic Commands in Tanzu Kubernetes Grid Integrated Edition.

`control_plane` Block

This optional block defines properties for Kubernetes control plane node instances.

When defining the control_plane block, you must specify either cpu, memory_in_mb, and ephemeral_disk_in_mb or none of the three.

Property	Type	Description
`cpu`	Integer	CPU count for control plane instances.
`memory_in_mb`	Integer	RAM for control plane instances.
`ephemeral_disk_in_mb`	Integer	Ephemeral disk for control plane instances.
`persistent_disk_in_mb`	Integer	Persistent disk for control plane instances. Do not specify this parameter if you intend to define the `azs` block in the compute profile.
`az_names`	Array	One or more AZs in which you want control plane instances to run. You defined these AZs in the `azs` block of the compute profile.
`instances`	Integer	Number of control plane instances. Specify `1`, `3`, or `5`.

Do not assign the name property to this block.

`node_pools` Block

This optional block defines properties for Kubernetes worker nodes. You can define one or more node pools.

When defining the node_pools block, you must specify either cpu, memory_in_mb, and ephemeral_disk_in_mb or none of the three.

Note: You must always configure at least one Node Pool group without a node_taints definition or with PreferNoSchedule taints. kube-scheduler will use this Node Pool group to schedule core Pods such as the coredns Pod. For more information about taints, see Taints and Tolerations in the Kubernetes documentation.

Property	Type	Description
`name`	String	Name of the node pool.
`description`	String	A description of the node pool.
`cpu`	Integer	CPU count for worker node instances.
`memory_in_mb`	Integer	RAM for worker node instances.
`ephemeral_disk_in_mb`	Integer	Ephemeral disk for worker node instances.
`persistent_disk_in_mb`	Integer	Persistent disk for worker node instances. Do not specify this parameter if you intend to define the `azs` block in the compute profile.
`az_names`	Array	One or more AZs in which you want worker node instances to run. You defined these AZs in the `azs` block of the compute profile.
`instances`	Integer	Number of worker node instances.
`max_worker_instances`	Integer	Maximum number of worker node instances for the node pool.
`node_labels`	String	One or more comma-delimited `key:value` pair labels you want to apply to worker node instances. For information on kubectl label syntax, see label in the kubectl documentation.
`node_taints`	String	One or more comma-delimited `key=value:effect` taints you want to apply to worker node instances. For information on kubectl taint syntax, see taint in the kubectl documentation.

The create-compute-profile Command

After a compute profile is defined in a JSON file as described in Compute Profile Format, a cluster administrator can create the compute profile by running the following TKGI CLI command:

tkgi create-compute-profile PATH-TO-YOUR-COMPUTE-PROFILE-CONFIGURATION

Where PATH-TO-YOUR-COMPUTE-PROFILE-CONFIGURATION is the path to the JSON file you created when defining the compute profile.

For example:

$ tkgi create-compute-profile dc-east-mixed.json

Compute profile dc-east-mixed successfully created

Only cluster administrators, pks.clusters.admin, can create compute profiles. If a cluster manager pks.clusters.manage or read-only admin pks.clusters.admin-read-only attempts to create a compute profile, the following error occurs:

You do not have enough privileges to perform this action. Please contact the TKGI administrator.

After an administrator creates a compute profile, cluster managers can create clusters with it or assign it to existing clusters. For more information, see the Using Compute Profiles (vSphere) topic.

Manage Compute Profiles

TKGI administrators can delete compute profiles. Administrators can also perform the same operations that cluster managers use to list compute profiles and manage how clusters use them.

Warning: These commands do not work for compute profiles created using the TKGI API in TKGI v1.8 or earlier.

View a Compute Profile

To view details about a compute profile, run the following command:

tkgi compute-profile COMPUTE-PROFILE-NAME

Where COMPUTE-PROFILE-NAME is the name of the compute profile you want to view.

For example:

tkgi compute-profile test-compute-profile

Name:         test-compute-profile
Description:  test-compute-profile
Parameters:
  Cluster Customization:
    Control Plane:
      Name:
      Instances:            3
      CPU:                  2
      Memory (Mb):          4096
      Ephemeral Disk (Mb):  16384
    Node Pool:
      Name:                 tiny-1
      Instances:            5
      CPU:                  2
      Memory (Mb):          4096
      Ephemeral Disk (Mb):  16384
    Node Pool:
      Name:                 medium-2
      Instances:            1
      CPU:                  4
      Memory (Mb):          4096
      Ephemeral Disk (Mb):  32768

Delete a Compute Profile

To delete a compute profile, run the following command:

tkgi delete-compute-profile COMPUTE-PROFILE-NAME

Where COMPUTE-PROFILE-NAME is the name of the compute profile you want to delete.

For example:

tkgi delete-compute-profile test-compute-profile-8

Are you sure you want to delete the compute profile test-compute-profile-8? (y/n): y
Deletion of test-compute-profile-8 completed

Limitations:

You cannot delete a compute profile that is in use by a cluster.
Only cluster administrators, pks.clusters.admin, can delete compute profiles. If a cluster manager pks.clusters.manage or read-only admin pks.clusters.admin-read-only attempts to delete a compute profile, the following error occurs:
```
You do not have enough privileges to perform this action. Please contact the TKGI administrator.
```

Cluster Manager Operations

The following sections link to operations that both TKGI administrators and cluster managers can perform on compute profiles, documented in the Using Compute Profiles (vSphere) topic.

Compute Profiles vs. Plans

As with plans defined in TKGI tile Plans panes, compute profiles let TKGI administrators define cluster resource choices for developers using Kubernetes.

Compute profiles offer more granular control over cluster topology and node sizing than plans do. For example, compute profiles can define heterogenous clusters with different CPU, memory, ephemeral disk, or persistent disk settings for control plane nodes and worker nodes.

You can also apply a compute profile to specific clusters, overriding the default settings defined by their plan and possibly avoiding the need to create new plans.

You use the TKGI tile to manage plans and the TKGI CLI to manage compute profiles.

Overview

About Compute Profiles

Create a Compute Profile

Compute Profile Format

Custom Nodes

Worker Node Pools

Custom AZs (vSphere with NSX-T Only)

Compute Profile Parameters

azs Block (vSphere with NSX-T Only)

Retrieve the BOSH CPI ID

control_plane Block

node_pools Block

The create-compute-profile Command

Manage Compute Profiles

View a Compute Profile

Delete a Compute Profile

Cluster Manager Operations

Compute Profiles vs. Plans

`azs` Block (vSphere with NSX-T Only)

`control_plane` Block

`node_pools` Block