This topic describes how to check the health of your VMware Tanzu Kubernetes Grid Integrated Edition (TKGI) deployment and the nodes, pods, and clusters that it hosts.

Verify Kubernetes Node and Pod Health

Verify the health of your Kubernetes nodes and pods by following the steps below:

  1. From the Ops Manager VM, run the following command:

    bosh -e ENVIRONMENT login
    

    Where ENVIRONMENT is the alias you set for your BOSH Director. For more information, see Using BOSH Diagnostic Commands in Tanzu Kubernetes Grid Integrated Edition.

    For example:

    $ bosh -e tkgi login
    
  2. To verify that all nodes are in a ready state, run the following command for all Kubernetes contexts:

    kubectl get nodes
    
  3. To verify that all pods are running, run the following command for all Kubernetes contexts:

    kubectl get pods --all-namespaces
    

Verify Kubernetes Cluster Health

Verify the health of your Kubernetes clusters by following the steps below:

  1. From the Ops Manager VM, run the following command:

    bosh -e ENVIRONMENT login
    

    Where ENVIRONMENT is the alias you set for your BOSH Director. For more information, see Using BOSH Diagnostic Commands in Tanzu Kubernetes Grid Integrated Edition.

    For example:

    $ bosh -e tkgi login
    
  2. To get the deployment name of a target Kubernetes cluster, run the following command:

    bosh deployments
    

    For example:

    $ bosh deployments  
    Using environment '30.0.0.10' as client 'ops_manager'  
    Name                                                   Release(s)                               Stemcell(s)                                      Team(s)  
    harbor-container-registry-b4023f6857207b237399         bosh-dns/1.10.0                          bosh-vsphere-esxi-ubuntu-jammy-go_agent/170.15  -  
                                                           harbor-container-registry/1.7.3-build.2  
    pivotal-container-service-7e64d53fc570503b5690         backup-and-restore-sdk/1.9.0             bosh-vsphere-esxi-ubuntu-jammy-go_agent/170.15  -  
                                                           bosh-dns/1.10.0  
                                                           bpm/0.13.0  
                                                           cf-mysql/36.14.0  
                                                           cfcr-etcd/1.8.0  
                                                           harbor-container-registry/1.7.3-build.2  
                                                           kubo/0.25.9  
                                                           kubo-service-adapter/1.3.3-build.1  
                                                           nsx-cf-cni/2.3.1.10693410  
                                                           on-demand-service-broker/0.24.0  
                                                           pks-api/1.3.3-build.1  
                                                           pks-helpers/50.0.0  
                                                           pks-nsx-t/1.20.0  
                                                           pks-telemetry/2.0.0-build.113  
                                                           pks-vrli/0.7.0  
                                                           sink-resources-release/0.1.15  
                                                           syslog/11.4.0  
                                                           uaa/64.0  
                                                           wavefront-proxy/0.9.0  
    service-instance_8de000ff-a87a-4930-81ba-106d42c2471e  bosh-dns/1.10.0                          bosh-vsphere-esxi-ubuntu-jammy-go_agent/170.15  pivotal-container-service-7e64d53fc570503b5690  
                                                           bpm/0.13.0  
                                                           cfcr-etcd/1.8.0  
                                                           harbor-container-registry/1.7.3-build.2  
                                                           kubo/0.25.9  
                                                           nsx-cf-cni/2.3.1.10693410  
                                                           pks-helpers/50.0.0  
                                                           pks-nsx-t/1.20.0  
                                                           pks-telemetry/2.0.0-build.113  
                                                           pks-vrli/0.7.0  
                                                           sink-resources-release/0.1.15  
                                                           syslog/11.4.0  
                                                           wavefront-proxy/0.9.0  
    
    3 deployments  
    

    In the example above, service-instance_8de000ff-a87a-4930-81ba-106d42c2471e is the Kubernetes cluster deployment name.

    Note: If you have deployed multiple Kubernetes clusters, determine the UUID using tkgi clusters and then match that UUID with the Kubernetes cluster deployment you are targeting.

  3. With each cluster in a deployment, or any specific cluster, check the status of the cluster’s VMs by running the following command:

    bosh -d K8S-DEPLOYMENT vms
    

    Where K8S-DEPLOYMENT is the name of your Kubernetes cluster deployment. Kubernetes cluster deployment names begin with service-instance and include a unique BOSH-generated identifier.

    This command returns the name of each VM comprising the Kubernetes cluster, including each control plane and worker node.

    For example:

    $ bosh -d service-instance_8de000ff-a87a-4930-81ba-106d42c2471e vms  
    Using environment '30.0.0.10' as client 'ops_manager'  
    Task 677. Done  
    Deployment 'service-instance_8de000ff-a87a-4930-81ba-106d42c2471e'  
    Instance                                     Process State  AZ      IPs       VM CID                                   VM Type      Active  
    master/b6d3c263-1682-4c79-a9ab-35939127dedb  running        AZ-K8S  40.0.2.2  vm-60dbcf68-5538-4c4e-8c00-61edc003bb54  medium.disk  true  
    worker/d450548a-2b0c-4494-8144-cf9b7ef9c825  running        AZ-K8S  40.0.2.4  vm-1bfdde6d-ce1d-4cdf-90d9-32bba260358f  medium.disk  true  
    worker/d7f882f0-33dd-43d3-ab5d-058bcc505088  running        AZ-K8S  40.0.2.3  vm-822cb573-411f-4c44-a32b-34e79520a7a6  medium.disk  true  
    worker/e5e25ffe-f448-4d19-990b-89546118c502  running        AZ-K8S  40.0.2.5  vm-c6748604-8440-4b27-9cf4-10a70a02da24  medium.disk  true  
    
    4 vms  
    
    Succeeded
    
  4. With each cluster in a deployment, or any specific cluster, check the status of the cluster’s processes by running the following command:

    bosh -d K8S-DEPLOYMENT instances --ps
    

    Where K8S-DEPLOYMENT is the name of your Kubernetes cluster deployment. Kubernetes cluster deployment names begin with service-instance and include a unique BOSH-generated identifier. This command returns status information for the processes on each Kubernetes cluster VM, including each control plane and worker node.

    For example:

    $ bosh -d service-instance_8de000ff-a87a-4930-81ba-106d42c2471e instances --ps  
    Using environment '30.0.0.10' as client 'ops_manager'  
    
    Task 678. Done  
    
    Deployment 'service-instance_8de000ff-a87a-4930-81ba-106d42c2471e'  
    
    Instance                                           Process                          Process State  AZ      IPs  
    apply-addons/ef0d09ae-d3ed-4832-8d3f-431d99730c26  -                                -              AZ-K8S  -  
    master/b6d3c263-1682-4c79-a9ab-35939127dedb        -                                running        AZ-K8S  40.0.2.2  
    ~                                                  blackbox                         running        -       -  
    ~                                                  bosh-dns                         running        -       -  
    ~                                                  bosh-dns-healthcheck             running        -       -  
    ~                                                  bosh-dns-resolvconf              running        -       -  
    ~                                                  etcd                             running        -       -  
    ~                                                  kube-apiserver                   running        -       -  
    ~                                                  kube-controller-manager          running        -       -  
    ~                                                  kube-scheduler                   running        -       -  
    ~                                                  ncp                              running        -       -  
    ~                                                  pks-helpers-bosh-dns-resolvconf  running        -       -  
    worker/d450548a-2b0c-4494-8144-cf9b7ef9c825        -                                running        AZ-K8S  40.0.2.4  
    ~                                                  blackbox                         running        -       -  
    ~                                                  bosh-dns                         running        -       -  
    ~                                                  bosh-dns-healthcheck             running        -       -  
    ~                                                  bosh-dns-resolvconf              running        -       -  
    ~                                                  containerd                       running        -       -  
    ~                                                  kube-proxy                       running        -       -  
    ~                                                  kubelet                          running        -       -  
    ~                                                  nsx-kube-proxy                   running        -       -  
    ~                                                  nsx-node-agent                   running        -       -  
    ~                                                  ovs-vswitchd                     running        -       -  
    ~                                                  ovsdb-server                     running        -       -  
    ~                                                  pks-helpers-bosh-dns-resolvconf  running        -       -  
    worker/d7f882f0-33dd-43d3-ab5d-058bcc505088        -                                running        AZ-K8S  40.0.2.3  
    ~                                                  blackbox                         running        -       -  
    ~                                                  bosh-dns                         running        -       -  
    ~                                                  bosh-dns-healthcheck             running        -       -  
    ~                                                  bosh-dns-resolvconf              running        -       -  
    ~                                                  containerd                       running        -       -  
    ~                                                  kube-proxy                       running        -       -  
    ~                                                  kubelet                          running        -       -  
    ~                                                  nsx-kube-proxy                   running        -       -  
    ~                                                  nsx-node-agent                   running        -       -  
    ~                                                  ovs-vswitchd                     running        -       -  
    ~                                                  ovsdb-server                     running        -       -  
    ~                                                  pks-helpers-bosh-dns-resolvconf  running        -       -  
    worker/e5e25ffe-f448-4d19-990b-89546118c502        -                                running        AZ-K8S  40.0.2.5  
    ~                                                  blackbox                         running        -       -  
    ~                                                  bosh-dns                         running        -       -  
    ~                                                  bosh-dns-healthcheck             running        -       -  
    ~                                                  bosh-dns-resolvconf              running        -       -  
    ~                                                  containerd                       running        -       -  
    ~                                                  kube-proxy                       running        -       -  
    ~                                                  kubelet                          running        -       -  
    ~                                                  nsx-kube-proxy                   running        -       -  
    ~                                                  nsx-node-agent                   running        -       -   
    ~                                                  ovs-vswitchd                     running        -       -  
    ~                                                  ovsdb-server                     running        -       -  
    ~                                                  pks-helpers-bosh-dns-resolvconf  running        -       -  
    
    51 instances   
    

Retrieve Cluster Upgrade Task ID

To retrieve the BOSH task ID for a recent cluster upgrade:

  1. (Optional) To retrieve a list of clusters, run the tkgi clusters command.
    For example:

    $ tkgi clusters  
    Upgrade is available to TKGI Version: 1.9.0-build.1  
    TKGI Version   Name      k8s Version  Plan Name  UUID                                  Status       Action  
    1.9.0-build.5  Sample5   1.18.8       small      04b9e9c3-ed99-4a24-b30d-b5c74b23d3b0  succeeded    UPGRADE  
    1.9.0-build.5  Sample6   1.18.8       small      0bb39685-73b9-458c-a52c-e79295a153b4  in progress  UPGRADE  
    1.8.0-build.2  Sample2   1.17.5       small      26e80c96-e65c-47e7-be78-3c43614f0712  succeeded    CREATE  
    1.8.0-build.2  Sample3   1.17.5       small      39667c39-b498-4065-b6fe-7119d579554b  succeeded    CREATE  
    1.8.0-build.2  Sample4   1.17.5       small      3ce19c9d-3e4c-48f3-8a4e-cd6d6a124617  succeeded    CREATE  
    
  2. Run the tkgi tasks command.

  3. In the tkgi tasks output, find the cluster’s UPGRADE task. The BOSH task ID is listed in the ID column.

    For example, the upgrade task ID here for the cluster Sample5 is 4925355e-44ed-4aea-abae-9f8e8d58c4d5:

    $ tkgi tasks  
    ID                                    Type     Status       StartTime                       EndTime                         Clusters  
    4925355e-44ed-4aea-abae-9f8e8d58c4d5  UPGRADE  done         Sun, 28 Jun 52048 05:00:00 PST  Tue, 30 Jun 52048 23:56:40 PST  Sample5  
    0ba8cb6b-e136-466f-99a3-8071bc4d7741  UPGRADE  in progress  Tue, 30 Jun 52048 23:40:00 PST  Tue, 30 Jun 52048 22:33:20 PST  Sample6  
    
    • Use the -l flag to limit the number of tasks returned by the tkgi tasks command. For more information, see tkgi tasks in the TKGI CLI topic.

Verify NCP Health (NSX Only)

NSX Container Plugin (NCP) runs as a BOSH host process. Each Kubernetes control plane node VM has one running NCP process. If your cluster has multiple control plane nodes, one NCP process is active while the others are on standby.

To verify the ncp process is running, do the following:

  1. Run bosh instances in your Tanzu Kubernetes Grid Integrated Edition environment:

    bosh -e ENVIRONMENT -d K8S-DEPLOYMENT instances --ps
    

    Where:

    • ENVIRONMENT is the alias you set for your BOSH Director.
    • K8S-DEPLOYMENT is the name of your Kubernetes cluster deployment. Kubernetes cluster deployment names begin with service-instance and include a unique BOSH-generated identifier.

    For example:

    $ bosh -e tkgi -d service-instance_8de000ff-a87a-4930-81ba-106d42c2471e instances --ps  
    Using environment '30.0.0.10' as client 'ops_manager'  
    Task 678. Done  
    Deployment 'service-instance_8de000ff-a87a-4930-81ba-106d42c2471e'  
    Instance                                           Process                          Process State  AZ      IPs  
    apply-addons/ef0d09ae-d3ed-4832-8d3f-431d99730c26  -                                -              AZ-K8S  -  
    master/b6d3c263-1682-4c79-a9ab-35939127dedb        -                                running        AZ-K8S  40.0.2.2  
    ~                                                  blackbox                         running        -       -  
    ~                                                  bosh-dns                         running        -       -  
    ~                                                  bosh-dns-healthcheck             running        -       -  
    ~                                                  bosh-dns-resolvconf              running        -       -  
    ~                                                  etcd                             running        -       -  
    ~                                                  kube-apiserver                   running        -       -  
    ~                                                  kube-controller-manager          running        -       -  
    ~                                                  kube-scheduler                   running        -       -  
    ~                                                  ncp                              running        -       -  
    ~                                                  pks-helpers-bosh-dns-resolvconf  running        -       -  
    

Alternatively:

  1. SSH into your target Kubernetes control plane node VM:

    bosh -e ENVIRONMENT -d K8S-DEPLOYMENT ssh master/VM-ID
    

    Where:

    • ENVIRONMENT is the alias you set for your BOSH Director.
    • K8S-DEPLOYMENT is the name of your Kubernetes cluster deployment. Kubernetes cluster deployment names begin with service-instance and include a unique BOSH-generated identifier.
    • VM-ID is your Kubernetes control plane node VM ID. This is a unique BOSH-generated identifier.

    For example:

    $ bosh -e tkgi -d service-instance_8de000ff-a87a-4930-81ba-106d42c2471e ssh master/b6d3c263-1682-4c79-a9ab-35939127dedb
    
  2. From the control plane node VM, run monit summary.

  3. (Optional) To check if the ncp process on your target control plane node is active or on standby, run /var/vcap/jobs/ncp/bin/nsxcli -c get ncp-master status. This applies only to multi-control plane node clusters.

For information about troubleshooting NCP, see NSX NCP troubleshooting and debug logging in the VMware Knowledge Base.

check-circle-line exclamation-circle-line close-line
Scroll to top icon