The Telco Cloud Operations deploy tool is compatible with jq version 1.6. There are two ways to install jq. The preferred way to is to use yum. The alternative is using wget. Both ways are documented.
Yum Installation (Recommended)
Procedure
- Run the following command and enter y when prompted. (You will see Complete! upon sucessful installation.)
$ yum install jq Loaded plugins: changelog, fastestmirror, langpacks, priorities, product-id, search-disabled-repos, subscription-manager You need to be root to perform this command. [worker@butler-worker deploy-tool]$ sudo yum install jq Loaded plugins: changelog, fastestmirror, langpacks, priorities, product-id, search-disabled-repos, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Determining fastest mirrors epel/x86_64/metalink | 18 kB 00:00:00 * base: centos-distro.1gservers.com * epel: mirror.sfo12.us.leaseweb.net * extras: mirrors.sonic.net * updates: linux.mirrors.es.net CentOS-Base-Internal | 3.6 kB 00:00:00 CentOS-Extras-Internal | 3.4 kB 00:00:00 CentOS-Updates-Internal | 3.0 kB 00:00:00 base | 3.6 kB 00:00:00 docker-ce-edge | 3.5 kB 00:00:00 docker-ce-stable | 3.5 kB 00:00:00 epel | 4.7 kB 00:00:00 extras | 2.9 kB 00:00:00 updates | 2.9 kB 00:00:00 (1/15): CentOS-Base-Internal/group_gz | 155 kB 00:00:00 (2/15): CentOS-Extras-Internal/primary_db | 166 kB 00:00:00 (3/15): base/7/x86_64/group_gz | 153 kB 00:00:00 (4/15): CentOS-Base-Internal/primary_db | 5.3 MB 00:00:01 (5/15): docker-ce-edge/x86_64/updateinfo | 55 B 00:00:00 (6/15): CentOS-Updates-Internal/primary_db | 9.8 MB 00:00:01 (7/15): docker-ce-edge/x86_64/primary_db | 48 kB 00:00:01 (8/15): docker-ce-stable/x86_64/primary_db | 44 kB 00:00:00 (9/15): epel/x86_64/group_gz | 95 kB 00:00:00 (10/15): docker-ce-stable/x86_64/updateinfo | 55 B 00:00:00 (11/15): epel/x86_64/updateinfo | 1.0 MB 00:00:00 (12/15): extras/7/x86_64/primary_db | 194 kB 00:00:00 (13/15): base/7/x86_64/primary_db | 6.1 MB 00:00:02 (14/15): updates/7/x86_64/primary_db | 2.1 MB 00:00:01 (15/15): epel/x86_64/primary_db | 6.8 MB 00:00:02 Resolving Dependencies --> Running transaction check ---> Package jq.x86_64 0:1.6-2.el7 will be installed --> Processing Dependency: libonig.so.5()(64bit) for package: jq-1.6-2.el7.x86_64 --> Running transaction check ---> Package oniguruma.x86_64 0:6.8.2-1.el7 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================================================================================= Package Arch Version Repository Size ================================================================================================================================================= Installing: jq x86_64 1.6-2.el7 epel 167 k Installing for dependencies: oniguruma x86_64 6.8.2-1.el7 epel 181 k Transaction Summary ================================================================================================================================================= Install 1 Package (+1 Dependent package) Total download size: 348 k Installed size: 1.0 M Is this ok [y/d/N]: y Downloading packages: (1/2): jq-1.6-2.el7.x86_64.rpm | 167 kB 00:00:00 (2/2): oniguruma-6.8.2-1.el7.x86_64.rpm | 181 kB 00:00:00 ------------------------------------------------------------------------------------------------------------------------------------------------- Total 654 kB/s | 348 kB 00:00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : oniguruma-6.8.2-1.el7.x86_64 1/2 Installing : jq-1.6-2.el7.x86_64 2/2 Verifying : oniguruma-6.8.2-1.el7.x86_64 1/2 Verifying : jq-1.6-2.el7.x86_64 2/2 Installed: jq.x86_64 0:1.6-2.el7 Dependency Installed: oniguruma.x86_64 0:6.8.2-1.el7 Complete!
- Verify the installation by running:
$ jq --version jq-1.6
If the command does not work, you may have to install the EPEL repository, then run the following command. Enter y when prompted.
$ sudo yum install epel-release Loaded plugins: changelog, fastestmirror, langpacks, priorities, product-id, search-disabled-repos, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile * base: centos-distro.1gservers.com * epel: mirror.sfo12.us.leaseweb.net * extras: mirrors.sonic.net * updates: linux.mirrors.es.net Resolving Dependencies --> Running transaction check ---> Package epel-release.noarch 0:7-11 will be updated ---> Package epel-release.noarch 0:7-12 will be an update --> Finished Dependency Resolution Dependencies Resolved ================================================================================================================================================= Package Arch Version Repository Size ================================================================================================================================================= Updating: epel-release noarch 7-12 epel 15 k Transaction Summary ================================================================================================================================================= Upgrade 1 Package Total download size: 15 k Is this ok [y/d/N]: y Downloading packages: Delta RPMs disabled because /usr/bin/applydeltarpm not installed. epel-release-7-12.noarch.rpm | 15 kB 00:00:04 Running transaction check Running transaction test Transaction test succeeded Running transaction Updating : epel-release-7-12.noarch 1/2 Cleanup : epel-release-7-11.noarch 2/2 Verifying : epel-release-7-12.noarch 1/2 Verifying : epel-release-7-11.noarch 2/2 Updated: epel-release.noarch 0:7-12 Complete! $ sudo yum install jq Loaded plugins: changelog, fastestmirror, langpacks, priorities, product-id, search-disabled-repos, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile * base: centos-distro.1gservers.com * epel: mirror.sfo12.us.leaseweb.net * extras: mirrors.sonic.net * updates: linux.mirrors.es.net Resolving Dependencies --> Running transaction check ---> Package jq.x86_64 0:1.6-2.el7 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================================================================================= Package Arch Version Repository Size ================================================================================================================================================= Installing: jq x86_64 1.6-2.el7 epel 167 k Transaction Summary ================================================================================================================================================= Install 1 Package Total download size: 167 k Installed size: 381 k Is this ok [y/d/N]: y Downloading packages: jq-1.6-2.el7.x86_64.rpm | 167 kB 00:00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : jq-1.6-2.el7.x86_64 1/1 Verifying : jq-1.6-2.el7.x86_64 1/1 Installed: jq.x86_64 0:1.6-2.el7 Complete!
wget Installation (Alternative)
- Download the package from the link and run the following command:
https://github.com/stedolan/jq/releases/download/jq-1.6/jq-linux64
$ wget -O jq https://github.com/stedolan/jq/releases/download/jq-1.6/jq-linux64 --2020-06-21 15:54:38-- https://github.com/stedolan/jq/releases/download/jq-1.6/jq-linux64 Resolving github.com (github.com)... 192.30.255.112 Connecting to github.com (github.com)|192.30.255.112|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/5101141/6387d980-de1f-11e8-8d3e-4455415aa408?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200621%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200621T225318Z&X-Amz-Expires=300&X-Amz-Signature=7a70537f9b23cde0c04104fb2017ceaa4490d95bf440ac9cbd851e8e892e2651&X-Amz-SignedHeaders=host&actor_id=0&repo_id=5101141&response-content-disposition=attachment%3B%20filename%3Djq-linux64&response-content-type=application%2Foctet-stream [following] --2020-06-21 15:54:38-- https://github-production-release-asset-2e65be.s3.amazonaws.com/5101141/6387d980-de1f-11e8-8d3e-4455415aa408?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200621%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200621T225318Z&X-Amz-Expires=300&X-Amz-Signature=7a70537f9b23cde0c04104fb2017ceaa4490d95bf440ac9cbd851e8e892e2651&X-Amz-SignedHeaders=host&actor_id=0&repo_id=5101141&response-content-disposition=attachment%3B%20filename%3Djq-linux64&response-content-type=application%2Foctet-stream Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.130.115 Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.130.115|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 3953824 (3.8M) [application/octet-stream] Saving to: ‘jq’ 100%[=======================================================================================================>] 3,953,824 6.02MB/s in 0.6s 2020-06-21 15:54:39 (6.02 MB/s) - ‘jq’ saved [3953824/3953824]
- Run the following commands to install wget:
$ chmod +x ./jq $ sudo cp jq /usr/bin
- Verify the installation:
$ jq --version jq-1.6
What to do next
Install cURL
