To deploy ESXi 8.0 Update 1c in the Telco Cloud Platform 5G Edition 3.1 environment, you must first install the ESXi 8.0 U1 ISO image and then apply the ESXi 8.0 Update 1c patch. For detailed steps to install the ESXi ISO image and to apply the patch, see the VMware vSphere documentation.

Procedure

  1. Install ESXi hosts.
    Note:

    • Do not configure RAID on the physical hosts.

    • Logs are stored on non-persistent storage. Refer to the corresponding product documentation to configure a syslog server or a scratch partition. Later, change the syslog to point to Aria Operations for Logs.

  2. Specify the network parameters for the host. Use static IP addresses and ensure that the VLAN ID is set for the management network.
  3. Specify a root password for the ESXi host.
    Note:

    For detailed installation steps, see the VMware vSphere 8.0 documentation.

What to do next

Configure the ESXi Hosts:

  1. Verify that the fully qualified domain name (FQDN) of the ESXi host is resolvable.

  2. Configure the appropriate VLAN ID for the VMkernel port group.

  3. Verify that all ESXi hosts can ping each other.