This section describes the procedure for discovering various types of Non-5G Core physical devices.

Prerequisites

The IP and ESM Domain Managers must be started in EDAA enabled mode for triggering discovery operations from UIVMware Telco Cloud Service Assurance UI.

Configure Physical Layer

  1. Navigate to Administration > Configuration > Integrations.
  2. In the 5G Integration section, click Add.
  3. In the Create Integration section, select Physical.
  4. Click Next.
  5. In the description section, enter the name and description.
  6. Click Next.

    The Physical page is displayed.

  7. In the Physical section, click Add.

    The Add Physical page is displayed.

For ICMP discovery, enter the parameters as listed in the following table:
Input Parameter Description Default Value
Name of the SNMP or ICMP Agent Provide the SNMP/ICMP instance name. NA
Data Center Select the data center from the drop-down menu. Core
Broker Host Select the broker IP for ICMP only.
SAM Select the SAM from the drop-down menu. NA
Domain Manager Select the domain manager from the drop-down menu. NA
Discovery Via Select the discovery via option as Add Agent ICMP Only. NA
Hostname or IP Provide the hostname for the ICMP agent. localhost
Seed Name When Add Agent ICMP Only option is selected, provide the seed name for the SNMP or ICMP agent.
Name Format When Add Agent ICMP Only option is selected, provide the name format for discovering the SNMP or ICMP agent.
For SNMP discovery, enter the parameters as listed in the following table:
Input Parameter Description Default Value
Name of the SNMP or ICMP Agent Provide the SNMP/ICMP instance name. NA
Data Center Select the data center from the drop-down menu. Core
Broker Host Select the broker IP for SNMP only.
SAM Select the SAM from the drop-down menu. NA
Domain Manager Select the domain manager from the drop-down menu. NA
Discovery Via Select the discovery via option as Add Agent SNMP Only. NA
Hostname or IP Provide the hostname for the ICMP agent. localhost
Read Community When Add Agent SNMP Only option is selected, provide the read community value. public
SNMP Port When Add Agent SNMP Only option is selected, provide the SNMP port number. 161
Seed Name When Add Agent SNMP Only option is selected, provide the seed name for the SNMP agent.
Name Format When Add Agent SNMP Only option is selected, provide the name format for discovering the SNMP agent.
SNMP Version When Add Agent SNMP Only is selected, select the SNMP version from the drop-down menu.
For ICMP or SNMP discovery, enter the parameters as listed in the following table:
Input Parameter Description Default Value
Name of the SNMP or ICMP Agent Provide the SNMP and ICMP instance name. NA
Data Center Select the data center from the drop-down menu. Core
Broker Host Select the broker IP for SNMP/ICMP from the drop-down menu.
SAM Select the SAM from the drop-down menu. NA
Domain Manager Select domain manager from the drop-down menu. NA
Discovery Via Select the discovery via option as Add Agent ICMP/SNMP Only. NA
Hostname or IP Provide the hostname for the SNMP/ICMP agent. localhost
Read Community When Add Agent ICMP/SNMP option is selected, provide the read community value. public
SNMP Port When Add Agent ICMP/SNMP option is selected, provide the SNMP port number. 161
Seed Name When Add Agent ICMP/SNMP option is selected, provide the seed name.
Name Format When Add Agent ICMP/SNMP option is selected, provide the name format for discovering the SNMP and ICMP agent.
SNMP Version When Add Agent ICMP/SNMP option is selected, select the SNMP version from the drop-down menu.
Engine ID When Add Agent SNMP Only or Add Agent ICMP/SNMP option and SNMP version V3 is selected, provide the engine ID value for the SNMPv3 credentials.
Context Name When Add Agent ICMP/SNMP option and SNMP version V3 is selected, provide the context name for the SNMPv3 credentials.
Note: Context Name is not mandatory.
Username When Add Agent ICMP/SNMP option and SNMP version V3 is selected, provide the username for the SNMPv3 credentials.
Authentication Protocol When Add Agent ICMP/SNMP option and SNMP version V3 is selected, select the authentication protocol from the drop-down menu for the SNMPv3 credentials. None
Privacy Protocol When Add Agent ICMP/SNMP option and SNMP version V3 is selected, select the privacy protocol from the drop-down menu for the SNMPv3 credentials. None
Authentication Password When Add Agent ICMP/SNMP option and SNMP version V3 is selected, provide the authentication password from the drop-down menu for the SNMPv3 credentials.
Privacy Password When Add Agent ICMP/SNMP option and SNMP version V3 is selected, provide the privacy password from the drop-down menu for the SNMPv3 credentials.
For Seed File discovery, enter the parameters as listed in the following table:
Input Parameter Description Default Value
Name of the SNMP or ICMP Agent Provide the SNMP/ICMP instance name. NA
Data Center Select the data center from the drop-down menu. Core
Broker Host Select the broker IP for SNMP only.
SAM Select the SAM from the drop-down menu. NA
Domain Manager Select the domain manager from the drop-down menu. NA
Discovery Via Select the discovery via option as Seed File. NA
Seed File Path Provide the seed file path.