## FORCE10 #bas-h2-dmg01a#sh ip ospf interface # #TenGigabitEthernet 0/0 is up, line protocol is up # Internet Address 10.118.0.133/30, Area 0 # Process ID 65033, Router ID 10.118.0.1, Network Type BROADCAST, Cost: 5 # Transmit Delay is 1 sec, State BDR, Priority 1 # Designated Router (ID) 10.118.0.3, Interface address 10.118.0.134 # Backup Designated Router (ID) 10.118.0.1, Interface address 10.118.0.133 # Timer intervals configured, Hello 5, Dead 15, Wait 15, Retransmit 5 # Hello due in 00:00:00 # Neighbor Count is 1, Adjacent neighbor count is 1 # Adjacent with neighbor 10.118.0.3 (Designated Router) #Vlan 1030 is up, line protocol is up # Internet Address 10.118.13.28/27, Area 0 # Process ID 65033, Router ID 10.118.0.1, Network Type BROADCAST, Cost: 25 # Transmit Delay is 1 sec, State WAIT, Priority 1 # Designated Router (ID) 0.0.0.0, Interface address 0.0.0.0 # Backup Designated Router (ID) 0.0.0.0, Interface address 0.0.0.0 # Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 # No Hellos (Passive interface) # Neighbor Count is 0, Adjacent neighbor count is 0