The following metrics data are collected through the Cisco IP-SLA Collector.
Metric Name | Description |
---|---|
CtrlAdminFrequency | Specifies the duration between initiating each RTT operation. |
CtrlAdminStatus | Provides the status of the conceptual RTT control row. |
CtrlAdminThreshold | Defines an administrative threshold limit. If the RTT operation time exceeds this limit and if the conditions specified in rttMonReactAdminThresholdType or rttMonHistoryAdminFilter are satisfied, a threshold is generated. |
CtrlAdminTimeout | Specifies the duration to wait for a RTT operation completion. |
CtrlAdminVerifyData | When set to true, the resulting data in each RTT operation is compared with the expected data. |
CtrlOperOctetsInUse | Provides the number of octets currently in use by this composite conceptual RTT row. |
CtrlOperRttLife | This object is decremented every second, until it reaches zero. When the value of this object is zero RTT operations for this row are suspended. |
EchoAdminCodecInterval | Represents the inter-packet delay between packets and is in milliseconds. |
EchoAdminCodecNumPackets | Represents the number of packets that need to be transmitted. |
EchoAdminCodecPayload | Represents the number of octets that needs to be placed into the Data portion of the message. |
EchoAdminInterval | Represents the inter-packet delay between packets and is in milliseconds. |
EchoAdminNumPackets | Represents the number of packets that need to be transmitted. |
EchoAdminPktDataRequestSize | Represents the native payload size that needs to be put on the packet |
LatestHTTPOperDNSRTT | Provides the Round Trip Time taken to perform DNS query within the HTTP operation. If an IP Address is specified in the URL then DNSRTT is 0." |
LatestHTTPOperMessageBodyBytes | Provides the size of the message body received as a response to the HTTP request. |
LatestHTTPOperRTT | Provides the Round Trip Time taken to perform HTTP operation. This valueRound Trip Time taken to perform HTTP operation. This value is the sum of DNSRTT, TCPConnectRTT and TransactionRTT. |
LatestHTTPOperSense | Provides an application specific sense code for the completion status of the latest RTT operation. |
LatestHTTPOperTCPConnectRTT | Provides the Round Trip Time taken to connect to the HTTP server. |
LatestHTTPOperTransactionRTT | Provides the Round Trip Time taken to download the object specified by the URL. |
LatestJitterOperICPIF | Represents ICPIF value for the latest jitter operation |
LatestJitterOperMOS | Pr ovides the MOS value for the latest jitter operation in hundreds. This value will be 0 if - rttMonEchoAdminCodecType of the operation is notApplicable - the operation is not started - the operation is started but failed. |
LatestJitterOperNumOfOW | Provides the number of successful one way latency measurements. |
LatestJitterOperNumOfRTT | Provides the number of RTT's that were successfully measured. |
LatestJitterOperOWSum2DS | Provides the sum of squares of one way latency from destination to Source. |
LatestJitterOperOWSum2SD | Provides the sum of squares of one way latency from source to destination. |
LatestJitterOperOWSumDS | Provides the sum of one way latency from destination to source. |
LatestJitterOperOWSumSD | Provides the sum of one way latency from source to destination. |
LatestJitterOperPacketLateArrival | Provides the number of packets that arrived after the timeout. |
LatestJitterOperPacketLossDS | Provides the number of packets lost when sent from destination to source. |
LatestJitterOperPacketLossSD | Provides the number of packets lost when sent from source to destination. |
LatestJitterOperPacketMIA | Provides the number of packets that are lost for which we cannot determine the direction. |
LatestJitterOperPacketOutOfSequence | Provides the number of packets arrived out of sequence. |
LatestJitterOperRTTMax | Provides the maximum of RTT's that were successfully measured. |
LatestJitterOperRTTMaxOfNegativesDS | Specifies the maximum of all negative jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMaxOfNegativesSD | Specifies the maximum of all negative jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMaxOfPositivesDS | Specifies the maximum of all positive jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMaxOfPositivesSD | Specifies the maximum of all positive jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMin | Provides the minimum of RTT's that were successfully measured. |
LatestJitterOperRTTMinOfNegativesDS | Specifies the minimum of all negative jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMinOfNegativesSD | Specifies the minimum of all negative jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMinOfPositivesDS | Specifies the minimum of all positive jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTMinOfPositivesSD | Specifies the minimum of all positive jitter values from packets sent from source to destination (SD) and destination to source (DS). |
LatestJitterOperRTTSum | Provides the sum of Jitter RTT's that are successfully measured. |
LatestJitterOperSense | Provides an application specific sense code for the completion status of the latest Jitter RTT operation. |
StatsCaptureCompletions | Provides the number of RTT operations that have completed without an error and without timing out. |
StatsCaptureOverThresholds | Provides the number of RTT operations successfully completed, but in excess of rttMonCtrlAdminThreshold. |
StatsCaptureSumCompletionTime | Provides the accumulated completion time of RTT operations which complete successfully. |
StatsCollectBusies | Provides the number of occasions when a RTT operation could not be initiated because a previous RTT operation has not been completed. |
StatsCollectDrops | Provides the number of occasions when a RTT operation could not be initiated because some necessary internal resource (for example memory, or SNA subsystem) was not available,or the operation completion could not be recognized. |
StatsCollectNoConnections | When the RttMonRttType is 'echo' or 'pathEcho',this is the number of occasions when a RTT operation could not be initiated because the connection to the target has not been established. |
StatsCollectNumDisconnects | When the RttMonRttType is 'echo' or pathEcho', this object represents the number of times that the target or hop along the path to a target became disconnected. |
StatsCollectSequenceErrors | When the RttMonRttType is 'echo' of 'pathEcho', this is the number of RTT operation completions received with an unexpected sequence identifier. |
StatsCollectTimeouts | Provides the number of occasions when a RTT operation was not completed before a timeout occurred. |
StatsCollectVerifyErrors | Provides the number of RTT operation completions received with data that does not compare with the expected data. |