About this task

Perform this procedure twice to deploy two identical NSX Edge devices. Enter the name and IP addresses for the respective device using the values shown in the tables.

NSX Edge Device

Device Name

NSX Edge Device 1

sfo01w01esg01

NSX Edge Device 2

sfo01w01esg02

Interface

Primary IP Address sfo01w01esg01

Primary IP Address sfo01w01esg02

Uplink01

172.16.35.2

172.16.35.3

Uplink02

172.27.13.3

172.27.13.2

sfo01w01udlr01

192.168.100.1

192.168.100.2

Procedure

  1. Log in to vCenter Server by using the vSphere Web Client.
    1. Open a Web browser and go to https://sfo01w01vc01.sfo01.rainpole.local/vsphere-client.
    2. Log in using the following credentials.

      Settings

      Value

      User name

      administrator@vsphere.local

      Password

      vsphere_admin_password

  2. Under Inventories, click Networking & Security.
  3. In the Navigator, click NSX Edges.
  4. Select 172.16.11.66 from the NSX Manager drop-down menu.
  5. Click the Add icon to deploy a new NSX Edge.

    The New NSX Edge wizard appears.

    1. On the Name and description page, enter the following settings and click Next.

      Settings

      Value

      Install Type

      Edge Service Gateway

      Name

      sfo01w01esg01

      Deploy NSX Edge

      Selected

      Enable High Availability

      Deselected

    2. On the Settings page, enter the following settings and click Next.

      Settings

      Value

      User Name

      admin

      Password

      edge_admin_password

      Enable SSH access

      Selected

      Enable FIPS mode

      Deselected

      Enable auto rule generation

      Selected

      Edge Control Level logging

      INFO

    3. On the Configure deployment page, select the Large radio button to specify the Appliance Size and click the Add icon.

      The Add NSX Edge Appliance dialog box appears. 

    4. In the Add NSX Edge Appliance dialog box, enter the following settings, click OK, and click Next.

      Setting

      Value

      Cluster/Resource Pool

      sfo01-w01rp-sddc-edge

      Datastore

      sfo01-w01-vsan01

      Folder

      sfo01-w01fd-nsx

    5. On the Configure Interfaces page, click the Add icon to configure the Uplink01 interface, enter the following settings, and click OK.

      Setting

      Value

      Name

      Uplink01

      Type

      Uplink

      Connected To

      sfo01-w01-vds01-Uplink01

      Connectivity Status

      Connected

      Primary IP Address

      172.16.35.2

      Subnet Prefix Length

      24

      MTU

      9000

      Send ICMP Redirect

      Selected

    6. Click the Add icon once again to configure the Uplink02 interface, enter the following settings, and click OK.

      Setting

      Value

      Name

      Uplink02

      Type

      Uplink

      Connected To

      sfo01-w01-vds01-Uplink02

      Connectivity Status

      Connected

      Primary IP Address

      172.27.13.3

      Subnet Prefix Length

      24

      MTU

      9000

      Send ICMP Redirect

      Selected

    7. Click the Add icon a third time to configure the UDLR interface, enter the following settings, click OK, and click Next.

      Setting

      Value

      Name

      sfo01w01udlr01

      Type

      Internal

      Connected To

      SFO01W01 Universal Transit Network

      Connectivity Status

      Connected

      Primary IP Address

      192.168.100.1

      Subnet Prefix Length

      24

      MTU

      9000

      Send ICMP Redirect

      Selected

    8. On the Default Gateway Settings page, deselect the Configure Default Gateway check box and click Next.
    9. On the Firewall and HA page, click Next.
    10. On the Ready to Complete page, review the configuration settings you entered and click Finish.
  6. Repeat this procedure to configure another NSX edge using the settings for the second NSX Edge device sfo01w01esg02.
  7. Configure DRS anti-affinity rules for the Edge Services Gateways.
    1. Go back to the Home page.
    2. In the Navigator, click Hosts and Clusters, and expand the sfo01w01vc01.sfo01.rainpole.local tree control.
    3. Select the sfo01-w01-consolidated01 cluster, and click the Configure tab.
    4. Under Configuration, click VM/Host Rules.
    5. Click Add.
    6. In the sfo01-w01-consolidated01 - Create VM/Host Rule dialog box, enter the following settings and click Add.

      Setting

      Value

      Name

      anti-affinity-rule-ecmpedges

      Enable rule

      Selected

      Type

      Separate Virtual Machine

    7. In the Add Rule Member dialog box, select the check box next to each of the two, newly deployed NSX ESGs, and click OK.
    8. In the sfo01-w01-consolidated01 - Create VM/Host Rule dialog box, click OK.